1# Makefile.in generated by automake 1.18 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2025 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17VPATH = @srcdir@ 18am__is_gnu_make = { \ 19 if test -z '$(MAKELEVEL)'; then \ 20 false; \ 21 elif test -n '$(MAKE_HOST)'; then \ 22 true; \ 23 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 24 true; \ 25 else \ 26 false; \ 27 fi; \ 28} 29am__make_running_with_option = \ 30 case $${target_option-} in \ 31 ?) ;; \ 32 *) echo "am__make_running_with_option: internal error: invalid" \ 33 "target option '$${target_option-}' specified" >&2; \ 34 exit 1;; \ 35 esac; \ 36 has_opt=no; \ 37 sane_makeflags=$$MAKEFLAGS; \ 38 if $(am__is_gnu_make); then \ 39 sane_makeflags=$$MFLAGS; \ 40 else \ 41 case $$MAKEFLAGS in \ 42 *\\[\ \ ]*) \ 43 bs=\\; \ 44 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 45 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 46 esac; \ 47 fi; \ 48 skip_next=no; \ 49 strip_trailopt () \ 50 { \ 51 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 52 }; \ 53 for flg in $$sane_makeflags; do \ 54 test $$skip_next = yes && { skip_next=no; continue; }; \ 55 case $$flg in \ 56 *=*|--*) continue;; \ 57 -*I) strip_trailopt 'I'; skip_next=yes;; \ 58 -*I?*) strip_trailopt 'I';; \ 59 -*O) strip_trailopt 'O'; skip_next=yes;; \ 60 -*O?*) strip_trailopt 'O';; \ 61 -*l) strip_trailopt 'l'; skip_next=yes;; \ 62 -*l?*) strip_trailopt 'l';; \ 63 -[dEDm]) skip_next=yes;; \ 64 -[JT]) skip_next=yes;; \ 65 esac; \ 66 case $$flg in \ 67 *$$target_option*) has_opt=yes; break;; \ 68 esac; \ 69 done; \ 70 test $$has_opt = yes 71am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 72am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 73am__rm_f = rm -f $(am__rm_f_notfound) 74am__rm_rf = rm -rf $(am__rm_f_notfound) 75pkgincludedir = $(includedir)/@PACKAGE@ 76pkglibdir = $(libdir)/@PACKAGE@ 77pkglibexecdir = $(libexecdir)/@PACKAGE@ 78am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 79install_sh_DATA = $(install_sh) -c -m 644 80install_sh_PROGRAM = $(install_sh) -c 81install_sh_SCRIPT = $(install_sh) -c 82INSTALL_HEADER = $(INSTALL_DATA) 83transform = $(program_transform_name) 84NORMAL_INSTALL = : 85PRE_INSTALL = : 86POST_INSTALL = : 87NORMAL_UNINSTALL = : 88PRE_UNINSTALL = : 89POST_UNINSTALL = : 90build_triplet = @build@ 91host_triplet = @host@ 92subdir = . 93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 94am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 95 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 96 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 97 $(top_srcdir)/m4/visibility.m4 $(top_srcdir)/acinclude.m4 \ 98 $(top_srcdir)/configure.ac 99am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 100 $(ACLOCAL_M4) 101DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 102 $(am__configure_deps) $(am__DIST_COMMON) 103am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 104 configure.lineno config.status.lineno 105mkinstalldirs = $(install_sh) -d 106CONFIG_HEADER = config.h 107CONFIG_CLEAN_FILES = libmagic.pc 108CONFIG_CLEAN_VPATH_FILES = 109AM_V_P = $(am__v_P_@AM_V@) 110am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 111am__v_P_0 = false 112am__v_P_1 = : 113AM_V_GEN = $(am__v_GEN_@AM_V@) 114am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 115am__v_GEN_0 = @echo " GEN " $@; 116am__v_GEN_1 = 117AM_V_at = $(am__v_at_@AM_V@) 118am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 119am__v_at_0 = @ 120am__v_at_1 = 121SOURCES = 122DIST_SOURCES = 123RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 124 ctags-recursive dvi-recursive html-recursive info-recursive \ 125 install-data-recursive install-dvi-recursive \ 126 install-exec-recursive install-html-recursive \ 127 install-info-recursive install-pdf-recursive \ 128 install-ps-recursive install-recursive installcheck-recursive \ 129 installdirs-recursive pdf-recursive ps-recursive \ 130 tags-recursive uninstall-recursive 131am__can_run_installinfo = \ 132 case $$AM_UPDATE_INFO_DIR in \ 133 n|no|NO) false;; \ 134 *) (install-info --version) >/dev/null 2>&1;; \ 135 esac 136am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 137am__vpath_adj = case $$p in \ 138 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 139 *) f=$$p;; \ 140 esac; 141am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 142am__install_max = 40 143am__nobase_strip_setup = \ 144 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 145am__nobase_strip = \ 146 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 147am__nobase_list = $(am__nobase_strip_setup); \ 148 for p in $$list; do echo "$$p $$p"; done | \ 149 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 150 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 151 if (++n[$$2] == $(am__install_max)) \ 152 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 153 END { for (dir in files) print dir, files[dir] }' 154am__base_list = \ 155 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 156 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 157am__uninstall_files_from_dir = { \ 158 { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 159 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 160 $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \ 161 } 162am__installdirs = "$(DESTDIR)$(pkgconfigexecdir)" 163DATA = $(pkgconfigexec_DATA) 164RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 165 distclean-recursive maintainer-clean-recursive 166am__recursive_targets = \ 167 $(RECURSIVE_TARGETS) \ 168 $(RECURSIVE_CLEAN_TARGETS) \ 169 $(am__extra_recursive_targets) 170AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 171 cscope distdir distdir-am dist dist-all distcheck 172am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ 173 config.h.in 174# Read a list of newline-separated strings from the standard input, 175# and print each of them once, without duplicates. Input order is 176# *not* preserved. 177am__uniquify_input = $(AWK) '\ 178 BEGIN { nonempty = 0; } \ 179 { items[$$0] = 1; nonempty = 1; } \ 180 END { if (nonempty) { for (i in items) print i; }; } \ 181' 182# Make sure the list of sources is unique. This is necessary because, 183# e.g., the same source file might be shared among _SOURCES variables 184# for different programs/libraries. 185am__define_uniq_tagged_files = \ 186 list='$(am__tagged_files)'; \ 187 unique=`for i in $$list; do \ 188 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 189 done | $(am__uniquify_input)` 190DIST_SUBDIRS = $(SUBDIRS) 191am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 192 $(srcdir)/libmagic.pc.in AUTHORS COPYING ChangeLog INSTALL \ 193 NEWS README.md TODO compile config.guess config.sub install-sh \ 194 ltmain.sh missing 195DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 196distdir = $(PACKAGE)-$(VERSION) 197top_distdir = $(distdir) 198am__remove_distdir = \ 199 if test -d "$(distdir)"; then \ 200 find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \ 201 ; rm -rf "$(distdir)" \ 202 || { sleep 5 && rm -rf "$(distdir)"; }; \ 203 else :; fi 204am__post_remove_distdir = $(am__remove_distdir) 205am__relativize = \ 206 dir0=`pwd`; \ 207 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 208 sed_rest='s,^[^/]*/*,,'; \ 209 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 210 sed_butlast='s,/*[^/]*$$,,'; \ 211 while test -n "$$dir1"; do \ 212 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 213 if test "$$first" != "."; then \ 214 if test "$$first" = ".."; then \ 215 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 216 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 217 else \ 218 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 219 if test "$$first2" = "$$first"; then \ 220 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 221 else \ 222 dir2="../$$dir2"; \ 223 fi; \ 224 dir0="$$dir0"/"$$first"; \ 225 fi; \ 226 fi; \ 227 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 228 done; \ 229 reldir="$$dir2" 230DIST_ARCHIVES = $(distdir).tar.gz 231GZIP_ENV = -9 232DIST_TARGETS = dist-gzip 233# Exists only to be overridden by the user if desired. 234AM_DISTCHECK_DVI_TARGET = dvi 235distuninstallcheck_listfiles = find . -type f -print 236am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 237 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 238distcleancheck_listfiles = \ 239 find . \( -type f -a \! \ 240 \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print 241pkgdatadir = @pkgdatadir@ 242ACLOCAL = @ACLOCAL@ 243AMTAR = @AMTAR@ 244AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 245AR = @AR@ 246AUTOCONF = @AUTOCONF@ 247AUTOHEADER = @AUTOHEADER@ 248AUTOMAKE = @AUTOMAKE@ 249AWK = @AWK@ 250CC = @CC@ 251CCDEPMODE = @CCDEPMODE@ 252CFLAGS = @CFLAGS@ 253CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ 254CPPFLAGS = @CPPFLAGS@ 255CSCOPE = @CSCOPE@ 256CTAGS = @CTAGS@ 257CYGPATH_W = @CYGPATH_W@ 258DEFS = @DEFS@ 259DEPDIR = @DEPDIR@ 260DLLTOOL = @DLLTOOL@ 261DSYMUTIL = @DSYMUTIL@ 262DUMPBIN = @DUMPBIN@ 263ECHO_C = @ECHO_C@ 264ECHO_N = @ECHO_N@ 265ECHO_T = @ECHO_T@ 266EGREP = @EGREP@ 267ETAGS = @ETAGS@ 268EXEEXT = @EXEEXT@ 269FGREP = @FGREP@ 270FILECMD = @FILECMD@ 271GREP = @GREP@ 272HAVE_VISIBILITY = @HAVE_VISIBILITY@ 273INSTALL = @INSTALL@ 274INSTALL_DATA = @INSTALL_DATA@ 275INSTALL_PROGRAM = @INSTALL_PROGRAM@ 276INSTALL_SCRIPT = @INSTALL_SCRIPT@ 277INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 278LD = @LD@ 279LDFLAGS = @LDFLAGS@ 280LIBOBJS = @LIBOBJS@ 281LIBS = @LIBS@ 282LIBTOOL = @LIBTOOL@ 283LIPO = @LIPO@ 284LN_S = @LN_S@ 285LTLIBOBJS = @LTLIBOBJS@ 286LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 287MAKEINFO = @MAKEINFO@ 288MANIFEST_TOOL = @MANIFEST_TOOL@ 289MINGW = @MINGW@ 290MKDIR_P = @MKDIR_P@ 291NM = @NM@ 292NMEDIT = @NMEDIT@ 293OBJDUMP = @OBJDUMP@ 294OBJEXT = @OBJEXT@ 295OTOOL = @OTOOL@ 296OTOOL64 = @OTOOL64@ 297PACKAGE = @PACKAGE@ 298PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 299PACKAGE_NAME = @PACKAGE_NAME@ 300PACKAGE_STRING = @PACKAGE_STRING@ 301PACKAGE_TARNAME = @PACKAGE_TARNAME@ 302PACKAGE_URL = @PACKAGE_URL@ 303PACKAGE_VERSION = @PACKAGE_VERSION@ 304PATH_SEPARATOR = @PATH_SEPARATOR@ 305RANLIB = @RANLIB@ 306SED = @SED@ 307SET_MAKE = @SET_MAKE@ 308SHELL = @SHELL@ 309STRIP = @STRIP@ 310VERSION = @VERSION@ 311WARNINGS = @WARNINGS@ 312abs_builddir = @abs_builddir@ 313abs_srcdir = @abs_srcdir@ 314abs_top_builddir = @abs_top_builddir@ 315abs_top_srcdir = @abs_top_srcdir@ 316ac_ct_AR = @ac_ct_AR@ 317ac_ct_CC = @ac_ct_CC@ 318ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 319am__include = @am__include@ 320am__leading_dot = @am__leading_dot@ 321am__quote = @am__quote@ 322am__rm_f_notfound = @am__rm_f_notfound@ 323am__tar = @am__tar@ 324am__untar = @am__untar@ 325am__xargs_n = @am__xargs_n@ 326bindir = @bindir@ 327build = @build@ 328build_alias = @build_alias@ 329build_cpu = @build_cpu@ 330build_os = @build_os@ 331build_vendor = @build_vendor@ 332builddir = @builddir@ 333datadir = @datadir@ 334datarootdir = @datarootdir@ 335docdir = @docdir@ 336dvidir = @dvidir@ 337exec_prefix = @exec_prefix@ 338fsect = @fsect@ 339host = @host@ 340host_alias = @host_alias@ 341host_cpu = @host_cpu@ 342host_os = @host_os@ 343host_vendor = @host_vendor@ 344htmldir = @htmldir@ 345includedir = @includedir@ 346infodir = @infodir@ 347install_sh = @install_sh@ 348libdir = @libdir@ 349libexecdir = @libexecdir@ 350localedir = @localedir@ 351localstatedir = @localstatedir@ 352mandir = @mandir@ 353mkdir_p = @mkdir_p@ 354oldincludedir = @oldincludedir@ 355pdfdir = @pdfdir@ 356prefix = @prefix@ 357program_transform_name = @program_transform_name@ 358psdir = @psdir@ 359runstatedir = @runstatedir@ 360sbindir = @sbindir@ 361sharedstatedir = @sharedstatedir@ 362srcdir = @srcdir@ 363sysconfdir = @sysconfdir@ 364target_alias = @target_alias@ 365top_build_prefix = @top_build_prefix@ 366top_builddir = @top_builddir@ 367top_srcdir = @top_srcdir@ 368ACLOCAL_AMFLAGS = -I m4 369EXTRA_DIST = MAINT RELEASE-PROCEDURE README.DEVELOPER README.md \ 370 m4/visibility.m4 371 372SUBDIRS = src magic tests doc python 373 374# This variable must have 'exec' in its name, in order to be installed 375# by 'install-exec' target (instead of default 'install-data') 376pkgconfigexecdir = $(libdir)/pkgconfig 377pkgconfigexec_DATA = libmagic.pc 378all: config.h 379 $(MAKE) $(AM_MAKEFLAGS) all-recursive 380 381.SUFFIXES: 382am--refresh: Makefile 383 @: 384$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 385 @for dep in $?; do \ 386 case '$(am__configure_deps)' in \ 387 *$$dep*) \ 388 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 389 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 390 && exit 0; \ 391 exit 1;; \ 392 esac; \ 393 done; \ 394 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 395 $(am__cd) $(top_srcdir) && \ 396 $(AUTOMAKE) --foreign Makefile 397Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 398 @case '$?' in \ 399 *config.status*) \ 400 echo ' $(SHELL) ./config.status'; \ 401 $(SHELL) ./config.status;; \ 402 *) \ 403 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 404 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 405 esac; 406 407$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 408 $(SHELL) ./config.status --recheck 409 410$(top_srcdir)/configure: $(am__configure_deps) 411 $(am__cd) $(srcdir) && $(AUTOCONF) 412$(ACLOCAL_M4): $(am__aclocal_m4_deps) 413 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 414$(am__aclocal_m4_deps): 415 416config.h: stamp-h1 417 @test -f $@ || rm -f stamp-h1 418 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 419 420stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 421 $(AM_V_at)rm -f stamp-h1 422 $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h 423$(srcdir)/config.h.in: $(am__configure_deps) 424 $(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 425 $(AM_V_at)rm -f stamp-h1 426 $(AM_V_at)touch $@ 427 428distclean-hdr: 429 -rm -f config.h stamp-h1 430libmagic.pc: $(top_builddir)/config.status $(srcdir)/libmagic.pc.in 431 cd $(top_builddir) && $(SHELL) ./config.status $@ 432 433mostlyclean-libtool: 434 -rm -f *.lo 435 436clean-libtool: 437 -rm -rf .libs _libs 438 439distclean-libtool: 440 -rm -f libtool config.lt 441install-pkgconfigexecDATA: $(pkgconfigexec_DATA) 442 @$(NORMAL_INSTALL) 443 @list='$(pkgconfigexec_DATA)'; test -n "$(pkgconfigexecdir)" || list=; \ 444 if test -n "$$list"; then \ 445 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigexecdir)'"; \ 446 $(MKDIR_P) "$(DESTDIR)$(pkgconfigexecdir)" || exit 1; \ 447 fi; \ 448 for p in $$list; do \ 449 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 450 echo "$$d$$p"; \ 451 done | $(am__base_list) | \ 452 while read files; do \ 453 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigexecdir)'"; \ 454 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigexecdir)" || exit $$?; \ 455 done 456 457uninstall-pkgconfigexecDATA: 458 @$(NORMAL_UNINSTALL) 459 @list='$(pkgconfigexec_DATA)'; test -n "$(pkgconfigexecdir)" || list=; \ 460 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 461 dir='$(DESTDIR)$(pkgconfigexecdir)'; $(am__uninstall_files_from_dir) 462 463# This directory's subdirectories are mostly independent; you can cd 464# into them and run 'make' without going through this Makefile. 465# To change the values of 'make' variables: instead of editing Makefiles, 466# (1) if the variable is set in 'config.status', edit 'config.status' 467# (which will cause the Makefiles to be regenerated when you run 'make'); 468# (2) otherwise, pass the desired values on the 'make' command line. 469$(am__recursive_targets): 470 @fail=; \ 471 if $(am__make_keepgoing); then \ 472 failcom='fail=yes'; \ 473 else \ 474 failcom='exit 1'; \ 475 fi; \ 476 dot_seen=no; \ 477 target=`echo $@ | sed s/-recursive//`; \ 478 case "$@" in \ 479 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 480 *) list='$(SUBDIRS)' ;; \ 481 esac; \ 482 for subdir in $$list; do \ 483 echo "Making $$target in $$subdir"; \ 484 if test "$$subdir" = "."; then \ 485 dot_seen=yes; \ 486 local_target="$$target-am"; \ 487 else \ 488 local_target="$$target"; \ 489 fi; \ 490 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 491 || eval $$failcom; \ 492 done; \ 493 if test "$$dot_seen" = "no"; then \ 494 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 495 fi; test -z "$$fail" 496 497ID: $(am__tagged_files) 498 $(am__define_uniq_tagged_files); mkid -fID $$unique 499tags: tags-recursive 500TAGS: tags 501 502tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 503 set x; \ 504 here=`pwd`; \ 505 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 506 include_option=--etags-include; \ 507 empty_fix=.; \ 508 else \ 509 include_option=--include; \ 510 empty_fix=; \ 511 fi; \ 512 list='$(SUBDIRS)'; for subdir in $$list; do \ 513 if test "$$subdir" = .; then :; else \ 514 test ! -f $$subdir/TAGS || \ 515 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 516 fi; \ 517 done; \ 518 $(am__define_uniq_tagged_files); \ 519 shift; \ 520 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 521 test -n "$$unique" || unique=$$empty_fix; \ 522 if test $$# -gt 0; then \ 523 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 524 "$$@" $$unique; \ 525 else \ 526 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 527 $$unique; \ 528 fi; \ 529 fi 530ctags: ctags-recursive 531 532CTAGS: ctags 533ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 534 $(am__define_uniq_tagged_files); \ 535 test -z "$(CTAGS_ARGS)$$unique" \ 536 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 537 $$unique 538 539GTAGS: 540 here=`$(am__cd) $(top_builddir) && pwd` \ 541 && $(am__cd) $(top_srcdir) \ 542 && gtags -i $(GTAGS_ARGS) "$$here" 543cscope: cscope.files 544 test ! -s cscope.files \ 545 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 546clean-cscope: 547 -rm -f cscope.files 548cscope.files: clean-cscope cscopelist 549cscopelist: cscopelist-recursive 550 551cscopelist-am: $(am__tagged_files) 552 list='$(am__tagged_files)'; \ 553 case "$(srcdir)" in \ 554 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 555 *) sdir=$(subdir)/$(srcdir) ;; \ 556 esac; \ 557 for i in $$list; do \ 558 if test -f "$$i"; then \ 559 echo "$(subdir)/$$i"; \ 560 else \ 561 echo "$$sdir/$$i"; \ 562 fi; \ 563 done >> $(top_builddir)/cscope.files 564 565distclean-tags: 566 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 567 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 568 569distdir: $(BUILT_SOURCES) 570 $(MAKE) $(AM_MAKEFLAGS) distdir-am 571 572distdir-am: $(DISTFILES) 573 $(am__remove_distdir) 574 $(AM_V_at)$(MKDIR_P) "$(distdir)" 575 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 576 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 577 list='$(DISTFILES)'; \ 578 dist_files=`for file in $$list; do echo $$file; done | \ 579 sed -e "s|^$$srcdirstrip/||;t" \ 580 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 581 case $$dist_files in \ 582 */*) $(MKDIR_P) `echo "$$dist_files" | \ 583 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 584 sort -u` ;; \ 585 esac; \ 586 for file in $$dist_files; do \ 587 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 588 if test -d $$d/$$file; then \ 589 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 590 if test -d "$(distdir)/$$file"; then \ 591 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 592 fi; \ 593 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 594 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 595 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 596 fi; \ 597 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 598 else \ 599 test -f "$(distdir)/$$file" \ 600 || cp -p $$d/$$file "$(distdir)/$$file" \ 601 || exit 1; \ 602 fi; \ 603 done 604 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 605 if test "$$subdir" = .; then :; else \ 606 $(am__make_dryrun) \ 607 || test -d "$(distdir)/$$subdir" \ 608 || $(MKDIR_P) "$(distdir)/$$subdir" \ 609 || exit 1; \ 610 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 611 $(am__relativize); \ 612 new_distdir=$$reldir; \ 613 dir1=$$subdir; dir2="$(top_distdir)"; \ 614 $(am__relativize); \ 615 new_top_distdir=$$reldir; \ 616 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 617 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 618 ($(am__cd) $$subdir && \ 619 $(MAKE) $(AM_MAKEFLAGS) \ 620 top_distdir="$$new_top_distdir" \ 621 distdir="$$new_distdir" \ 622 am__remove_distdir=: \ 623 am__skip_length_check=: \ 624 am__skip_mode_fix=: \ 625 distdir) \ 626 || exit 1; \ 627 fi; \ 628 done 629 -test -n "$(am__skip_mode_fix)" \ 630 || find "$(distdir)" -type d ! -perm -755 \ 631 -exec chmod u+rwx,go+rx {} \; -o \ 632 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 633 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 634 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 635 || chmod -R a+r "$(distdir)" 636dist-gzip: distdir 637 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 638 $(am__post_remove_distdir) 639 640dist-bzip2: distdir 641 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 642 $(am__post_remove_distdir) 643 644dist-bzip3: distdir 645 tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3 646 $(am__post_remove_distdir) 647 648dist-lzip: distdir 649 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 650 $(am__post_remove_distdir) 651 652dist-xz: distdir 653 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 654 $(am__post_remove_distdir) 655 656dist-zstd: distdir 657 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst 658 $(am__post_remove_distdir) 659 660dist-tarZ: distdir 661 @echo WARNING: "Support for distribution archives compressed with" \ 662 "legacy program 'compress' is deprecated." >&2 663 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 664 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 665 $(am__post_remove_distdir) 666 667dist-shar: distdir 668 @echo WARNING: "Support for shar distribution archives is" \ 669 "deprecated." >&2 670 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 671 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 672 $(am__post_remove_distdir) 673 674dist-zip: distdir 675 -rm -f $(distdir).zip 676 zip -rq $(distdir).zip $(distdir) 677 $(am__post_remove_distdir) 678 679dist dist-all: 680 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 681 $(am__post_remove_distdir) 682 683# This target untars the dist file and tries a VPATH configuration. Then 684# it guarantees that the distribution is self-contained by making another 685# tarfile. 686distcheck: dist 687 case '$(DIST_ARCHIVES)' in \ 688 *.tar.gz*) \ 689 eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 690 *.tar.bz2*) \ 691 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 692 *.tar.bz3*) \ 693 bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\ 694 *.tar.lz*) \ 695 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 696 *.tar.xz*) \ 697 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 698 *.tar.Z*) \ 699 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 700 *.shar.gz*) \ 701 eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\ 702 *.zip*) \ 703 unzip $(distdir).zip ;;\ 704 *.tar.zst*) \ 705 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ 706 esac 707 chmod -R a-w $(distdir) 708 chmod u+w $(distdir) 709 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 710 chmod a-w $(distdir) 711 test -d $(distdir)/_build || exit 0; \ 712 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 713 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 714 && am__cwd=`pwd` \ 715 && $(am__cd) $(distdir)/_build/sub \ 716 && ../../configure \ 717 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 718 $(DISTCHECK_CONFIGURE_FLAGS) \ 719 --srcdir=../.. --prefix="$$dc_install_base" \ 720 && $(MAKE) $(AM_MAKEFLAGS) \ 721 && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ 722 && $(MAKE) $(AM_MAKEFLAGS) check \ 723 && $(MAKE) $(AM_MAKEFLAGS) install \ 724 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 725 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 726 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 727 distuninstallcheck \ 728 && chmod -R a-w "$$dc_install_base" \ 729 && ({ \ 730 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 731 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 732 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 733 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 734 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 735 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 736 && rm -rf "$$dc_destdir" \ 737 && $(MAKE) $(AM_MAKEFLAGS) dist \ 738 && rm -rf $(DIST_ARCHIVES) \ 739 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 740 && cd "$$am__cwd" \ 741 || exit 1 742 $(am__post_remove_distdir) 743 @(echo "$(distdir) archives ready for distribution: "; \ 744 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 745 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 746distuninstallcheck: 747 @test -n '$(distuninstallcheck_dir)' || { \ 748 echo 'ERROR: trying to run $@ with an empty' \ 749 '$$(distuninstallcheck_dir)' >&2; \ 750 exit 1; \ 751 }; \ 752 $(am__cd) '$(distuninstallcheck_dir)' || { \ 753 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 754 exit 1; \ 755 }; \ 756 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 757 || { echo "ERROR: files left after uninstall:" ; \ 758 if test -n "$(DESTDIR)"; then \ 759 echo " (check DESTDIR support)"; \ 760 fi ; \ 761 $(distuninstallcheck_listfiles) ; \ 762 exit 1; } >&2 763distcleancheck: distclean 764 @if test '$(srcdir)' = . ; then \ 765 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 766 exit 1 ; \ 767 fi 768 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 769 || { echo "ERROR: files left in build directory after distclean:" ; \ 770 $(distcleancheck_listfiles) ; \ 771 exit 1; } >&2 772check-am: all-am 773check: check-recursive 774all-am: Makefile $(DATA) config.h 775installdirs: installdirs-recursive 776installdirs-am: 777 for dir in "$(DESTDIR)$(pkgconfigexecdir)"; do \ 778 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 779 done 780install: install-recursive 781install-exec: install-exec-recursive 782install-data: install-data-recursive 783uninstall: uninstall-recursive 784 785install-am: all-am 786 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 787 788installcheck: installcheck-recursive 789install-strip: 790 if test -z '$(STRIP)'; then \ 791 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 792 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 793 install; \ 794 else \ 795 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 796 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 797 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 798 fi 799mostlyclean-generic: 800 801clean-generic: 802 803distclean-generic: 804 -$(am__rm_f) $(CONFIG_CLEAN_FILES) 805 -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) 806 807maintainer-clean-generic: 808 @echo "This command is intended for maintainers to use" 809 @echo "it deletes files that may require special tools to rebuild." 810clean: clean-recursive 811 812clean-am: clean-generic clean-libtool mostlyclean-am 813 814distclean: distclean-recursive 815 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 816 -rm -f Makefile 817distclean-am: clean-am distclean-generic distclean-hdr \ 818 distclean-libtool distclean-tags 819 820dvi: dvi-recursive 821 822dvi-am: 823 824html: html-recursive 825 826html-am: 827 828info: info-recursive 829 830info-am: 831 832install-data-am: 833 834install-dvi: install-dvi-recursive 835 836install-dvi-am: 837 838install-exec-am: install-pkgconfigexecDATA 839 840install-html: install-html-recursive 841 842install-html-am: 843 844install-info: install-info-recursive 845 846install-info-am: 847 848install-man: 849 850install-pdf: install-pdf-recursive 851 852install-pdf-am: 853 854install-ps: install-ps-recursive 855 856install-ps-am: 857 858installcheck-am: 859 860maintainer-clean: maintainer-clean-recursive 861 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 862 -rm -rf $(top_srcdir)/autom4te.cache 863 -rm -f Makefile 864maintainer-clean-am: distclean-am maintainer-clean-generic 865 866mostlyclean: mostlyclean-recursive 867 868mostlyclean-am: mostlyclean-generic mostlyclean-libtool 869 870pdf: pdf-recursive 871 872pdf-am: 873 874ps: ps-recursive 875 876ps-am: 877 878uninstall-am: uninstall-pkgconfigexecDATA 879 880.MAKE: $(am__recursive_targets) all install-am install-strip 881 882.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 883 am--refresh check check-am clean clean-cscope clean-generic \ 884 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 885 dist-all dist-bzip2 dist-bzip3 dist-gzip dist-lzip dist-shar \ 886 dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ 887 distclean-generic distclean-hdr distclean-libtool \ 888 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 889 dvi-am html html-am info info-am install install-am \ 890 install-data install-data-am install-dvi install-dvi-am \ 891 install-exec install-exec-am install-html install-html-am \ 892 install-info install-info-am install-man install-pdf \ 893 install-pdf-am install-pkgconfigexecDATA install-ps \ 894 install-ps-am install-strip installcheck installcheck-am \ 895 installdirs installdirs-am maintainer-clean \ 896 maintainer-clean-generic mostlyclean mostlyclean-generic \ 897 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 898 uninstall-am uninstall-pkgconfigexecDATA 899 900.PRECIOUS: Makefile 901 902 903# Tell versions [3.59,3.63) of GNU make to not export all variables. 904# Otherwise a system limit (for SysV at least) may be exceeded. 905.NOEXPORT: 906 907# Tell GNU make to disable its built-in pattern rules. 908%:: %,v 909%:: RCS/%,v 910%:: RCS/% 911%:: s.% 912%:: SCCS/s.% 913