xref: /freebsd/contrib/expat/Makefile.in (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#                          __  __            _
19#                       ___\ \/ /_ __   __ _| |_
20#                      / _ \\  /| '_ \ / _` | __|
21#                     |  __//  \| |_) | (_| | |_
22#                      \___/_/\_\ .__/ \__,_|\__|
23#                               |_| XML parser
24#
25# Copyright (c) 2017-2023 Sebastian Pipping <sebastian@pipping.org>
26# Copyright (c) 2018      KangLin <kl222@126.com>
27# Copyright (c) 2022      Johnny Jazeix <jazeix@gmail.com>
28# Copyright (c) 2023      Sony Corporation / Snild Dolkow <snild@sony.com>
29# Licensed under the MIT license:
30#
31# Permission is  hereby granted,  free of charge,  to any  person obtaining
32# a  copy  of  this  software   and  associated  documentation  files  (the
33# "Software"),  to  deal in  the  Software  without restriction,  including
34# without  limitation the  rights  to use,  copy,  modify, merge,  publish,
35# distribute, sublicense, and/or sell copies of the Software, and to permit
36# persons  to whom  the Software  is  furnished to  do so,  subject to  the
37# following conditions:
38#
39# The above copyright  notice and this permission notice  shall be included
40# in all copies or substantial portions of the Software.
41#
42# THE  SOFTWARE  IS  PROVIDED  "AS  IS",  WITHOUT  WARRANTY  OF  ANY  KIND,
43# EXPRESS  OR IMPLIED,  INCLUDING  BUT  NOT LIMITED  TO  THE WARRANTIES  OF
44# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
45# NO EVENT SHALL THE AUTHORS OR  COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
46# DAMAGES OR  OTHER LIABILITY, WHETHER  IN AN  ACTION OF CONTRACT,  TORT OR
47# OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
48# USE OR OTHER DEALINGS IN THE SOFTWARE.
49
50VPATH = @srcdir@
51am__is_gnu_make = { \
52  if test -z '$(MAKELEVEL)'; then \
53    false; \
54  elif test -n '$(MAKE_HOST)'; then \
55    true; \
56  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
57    true; \
58  else \
59    false; \
60  fi; \
61}
62am__make_running_with_option = \
63  case $${target_option-} in \
64      ?) ;; \
65      *) echo "am__make_running_with_option: internal error: invalid" \
66              "target option '$${target_option-}' specified" >&2; \
67         exit 1;; \
68  esac; \
69  has_opt=no; \
70  sane_makeflags=$$MAKEFLAGS; \
71  if $(am__is_gnu_make); then \
72    sane_makeflags=$$MFLAGS; \
73  else \
74    case $$MAKEFLAGS in \
75      *\\[\ \	]*) \
76        bs=\\; \
77        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
78          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
79    esac; \
80  fi; \
81  skip_next=no; \
82  strip_trailopt () \
83  { \
84    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
85  }; \
86  for flg in $$sane_makeflags; do \
87    test $$skip_next = yes && { skip_next=no; continue; }; \
88    case $$flg in \
89      *=*|--*) continue;; \
90        -*I) strip_trailopt 'I'; skip_next=yes;; \
91      -*I?*) strip_trailopt 'I';; \
92        -*O) strip_trailopt 'O'; skip_next=yes;; \
93      -*O?*) strip_trailopt 'O';; \
94        -*l) strip_trailopt 'l'; skip_next=yes;; \
95      -*l?*) strip_trailopt 'l';; \
96      -[dEDm]) skip_next=yes;; \
97      -[JT]) skip_next=yes;; \
98    esac; \
99    case $$flg in \
100      *$$target_option*) has_opt=yes; break;; \
101    esac; \
102  done; \
103  test $$has_opt = yes
104am__make_dryrun = (target_option=n; $(am__make_running_with_option))
105am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
106pkgdatadir = $(datadir)/@PACKAGE@
107pkgincludedir = $(includedir)/@PACKAGE@
108pkglibdir = $(libdir)/@PACKAGE@
109pkglibexecdir = $(libexecdir)/@PACKAGE@
110am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
111install_sh_DATA = $(install_sh) -c -m 644
112install_sh_PROGRAM = $(install_sh) -c
113install_sh_SCRIPT = $(install_sh) -c
114INSTALL_HEADER = $(INSTALL_DATA)
115transform = $(program_transform_name)
116NORMAL_INSTALL = :
117PRE_INSTALL = :
118POST_INSTALL = :
119NORMAL_UNINSTALL = :
120PRE_UNINSTALL = :
121POST_UNINSTALL = :
122build_triplet = @build@
123host_triplet = @host@
124@WITH_EXAMPLES_TRUE@am__append_1 = examples
125@WITH_TESTS_TRUE@am__append_2 = tests
126@WITH_XMLWF_TRUE@am__append_3 = xmlwf doc
127subdir = .
128ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
129am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
130	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
131	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
132	$(top_srcdir)/acinclude.m4 \
133	$(top_srcdir)/conftools/ax-require-defined.m4 \
134	$(top_srcdir)/conftools/ax-check-compile-flag.m4 \
135	$(top_srcdir)/conftools/ax-check-link-flag.m4 \
136	$(top_srcdir)/conftools/ax-append-flag.m4 \
137	$(top_srcdir)/conftools/ax-append-compile-flags.m4 \
138	$(top_srcdir)/conftools/ax-append-link-flags.m4 \
139	$(top_srcdir)/conftools/expatcfg-compiler-supports-visibility.m4 \
140	$(top_srcdir)/conftools/ax-cxx-compile-stdcxx.m4 \
141	$(top_srcdir)/conftools/ax-cxx-compile-stdcxx-11.m4 \
142	$(top_srcdir)/configure.ac
143am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
144	$(ACLOCAL_M4)
145DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
146	$(am__configure_deps) $(dist_cmake_DATA) $(am__DIST_COMMON)
147am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
148 configure.lineno config.status.lineno
149mkinstalldirs = $(install_sh) -d
150CONFIG_HEADER = expat_config.h
151CONFIG_CLEAN_FILES = expat.pc cmake/expat-config.cmake \
152	cmake/autotools/expat-config-version.cmake \
153	cmake/autotools/expat-noconfig.cmake run.sh
154CONFIG_CLEAN_VPATH_FILES =
155AM_V_P = $(am__v_P_@AM_V@)
156am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
157am__v_P_0 = false
158am__v_P_1 = :
159AM_V_GEN = $(am__v_GEN_@AM_V@)
160am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
161am__v_GEN_0 = @echo "  GEN     " $@;
162am__v_GEN_1 =
163AM_V_at = $(am__v_at_@AM_V@)
164am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
165am__v_at_0 = @
166am__v_at_1 =
167SOURCES =
168DIST_SOURCES =
169RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
170	ctags-recursive dvi-recursive html-recursive info-recursive \
171	install-data-recursive install-dvi-recursive \
172	install-exec-recursive install-html-recursive \
173	install-info-recursive install-pdf-recursive \
174	install-ps-recursive install-recursive installcheck-recursive \
175	installdirs-recursive pdf-recursive ps-recursive \
176	tags-recursive uninstall-recursive
177am__can_run_installinfo = \
178  case $$AM_UPDATE_INFO_DIR in \
179    n|no|NO) false;; \
180    *) (install-info --version) >/dev/null 2>&1;; \
181  esac
182am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
183am__vpath_adj = case $$p in \
184    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
185    *) f=$$p;; \
186  esac;
187am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
188am__install_max = 40
189am__nobase_strip_setup = \
190  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
191am__nobase_strip = \
192  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
193am__nobase_list = $(am__nobase_strip_setup); \
194  for p in $$list; do echo "$$p $$p"; done | \
195  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
196  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
197    if (++n[$$2] == $(am__install_max)) \
198      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
199    END { for (dir in files) print dir, files[dir] }'
200am__base_list = \
201  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
202  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
203am__uninstall_files_from_dir = { \
204  test -z "$$files" \
205    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
206    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
207         $(am__cd) "$$dir" && rm -f $$files; }; \
208  }
209am__installdirs = "$(DESTDIR)$(cmakedir)" "$(DESTDIR)$(cmakedir)" \
210	"$(DESTDIR)$(pkgconfigdir)"
211DATA = $(dist_cmake_DATA) $(nodist_cmake_DATA) $(pkgconfig_DATA)
212RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
213  distclean-recursive maintainer-clean-recursive
214am__recursive_targets = \
215  $(RECURSIVE_TARGETS) \
216  $(RECURSIVE_CLEAN_TARGETS) \
217  $(am__extra_recursive_targets)
218AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
219	cscope distdir distdir-am dist dist-all distcheck
220am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
221	expat_config.h.in
222# Read a list of newline-separated strings from the standard input,
223# and print each of them once, without duplicates.  Input order is
224# *not* preserved.
225am__uniquify_input = $(AWK) '\
226  BEGIN { nonempty = 0; } \
227  { items[$$0] = 1; nonempty = 1; } \
228  END { if (nonempty) { for (i in items) print i; }; } \
229'
230# Make sure the list of sources is unique.  This is necessary because,
231# e.g., the same source file might be shared among _SOURCES variables
232# for different programs/libraries.
233am__define_uniq_tagged_files = \
234  list='$(am__tagged_files)'; \
235  unique=`for i in $$list; do \
236    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
237  done | $(am__uniquify_input)`
238DIST_SUBDIRS = lib examples tests xmlwf doc
239am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/expat.pc.in \
240	$(srcdir)/expat_config.h.in $(srcdir)/run.sh.in \
241	$(top_srcdir)/cmake/autotools/expat-config-version.cmake.in \
242	$(top_srcdir)/cmake/expat-config.cmake.in \
243	$(top_srcdir)/conftools/ar-lib $(top_srcdir)/conftools/compile \
244	$(top_srcdir)/conftools/config.guess \
245	$(top_srcdir)/conftools/config.sub \
246	$(top_srcdir)/conftools/install-sh \
247	$(top_srcdir)/conftools/ltmain.sh \
248	$(top_srcdir)/conftools/missing AUTHORS COPYING README.md \
249	conftools/ar-lib conftools/compile conftools/config.guess \
250	conftools/config.sub conftools/depcomp conftools/install-sh \
251	conftools/ltmain.sh conftools/missing
252DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
253distdir = $(PACKAGE)-$(VERSION)
254top_distdir = $(distdir)
255am__remove_distdir = \
256  if test -d "$(distdir)"; then \
257    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
258      && rm -rf "$(distdir)" \
259      || { sleep 5 && rm -rf "$(distdir)"; }; \
260  else :; fi
261am__post_remove_distdir = $(am__remove_distdir)
262am__relativize = \
263  dir0=`pwd`; \
264  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
265  sed_rest='s,^[^/]*/*,,'; \
266  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
267  sed_butlast='s,/*[^/]*$$,,'; \
268  while test -n "$$dir1"; do \
269    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
270    if test "$$first" != "."; then \
271      if test "$$first" = ".."; then \
272        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
273        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
274      else \
275        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
276        if test "$$first2" = "$$first"; then \
277          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
278        else \
279          dir2="../$$dir2"; \
280        fi; \
281        dir0="$$dir0"/"$$first"; \
282      fi; \
283    fi; \
284    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
285  done; \
286  reldir="$$dir2"
287DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 $(distdir).tar.lz \
288	$(distdir).tar.xz
289GZIP_ENV = --best
290DIST_TARGETS = dist-lzip dist-xz dist-bzip2 dist-gzip
291# Exists only to be overridden by the user if desired.
292AM_DISTCHECK_DVI_TARGET = dvi
293distuninstallcheck_listfiles = find . -type f -print
294am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
295  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
296distcleancheck_listfiles = find . -type f -print
297ACLOCAL = @ACLOCAL@
298AMTAR = @AMTAR@
299AM_CFLAGS = @AM_CFLAGS@
300AM_CPPFLAGS = @AM_CPPFLAGS@
301AM_CXXFLAGS = @AM_CXXFLAGS@
302AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
303AM_LDFLAGS = @AM_LDFLAGS@
304AR = @AR@
305AS = @AS@
306AUTOCONF = @AUTOCONF@
307AUTOHEADER = @AUTOHEADER@
308AUTOMAKE = @AUTOMAKE@
309AWK = @AWK@
310CC = @CC@
311CCDEPMODE = @CCDEPMODE@
312CFLAGS = @CFLAGS@
313CMAKE_SHARED_LIBRARY_PREFIX = @CMAKE_SHARED_LIBRARY_PREFIX@
314CPPFLAGS = @CPPFLAGS@
315CSCOPE = @CSCOPE@
316CTAGS = @CTAGS@
317CXX = @CXX@
318CXXCPP = @CXXCPP@
319CXXDEPMODE = @CXXDEPMODE@
320CXXFLAGS = @CXXFLAGS@
321CYGPATH_W = @CYGPATH_W@
322DEFS = @DEFS@
323DEPDIR = @DEPDIR@
324DLLTOOL = @DLLTOOL@
325DOCBOOK_TO_MAN = @DOCBOOK_TO_MAN@
326DSYMUTIL = @DSYMUTIL@
327DUMPBIN = @DUMPBIN@
328ECHO_C = @ECHO_C@
329ECHO_N = @ECHO_N@
330ECHO_T = @ECHO_T@
331EGREP = @EGREP@
332ETAGS = @ETAGS@
333EXEEXT = @EXEEXT@
334EXPAT_ATTR_INFO = @EXPAT_ATTR_INFO@
335EXPAT_CHAR_TYPE = @EXPAT_CHAR_TYPE@
336EXPAT_CONTEXT_BYTES = @EXPAT_CONTEXT_BYTES@
337EXPAT_DTD = @EXPAT_DTD@
338EXPAT_LARGE_SIZE = @EXPAT_LARGE_SIZE@
339EXPAT_MIN_SIZE = @EXPAT_MIN_SIZE@
340EXPAT_NS = @EXPAT_NS@
341FGREP = @FGREP@
342FILECMD = @FILECMD@
343FILEMAP = @FILEMAP@
344GREP = @GREP@
345HAVE_CXX11 = @HAVE_CXX11@
346INSTALL = @INSTALL@
347INSTALL_DATA = @INSTALL_DATA@
348INSTALL_PROGRAM = @INSTALL_PROGRAM@
349INSTALL_SCRIPT = @INSTALL_SCRIPT@
350INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
351LD = @LD@
352LDFLAGS = @LDFLAGS@
353LIBAGE = @LIBAGE@
354LIBCURRENT = @LIBCURRENT@
355LIBDIR_BASENAME = @LIBDIR_BASENAME@
356LIBM = @LIBM@
357LIBOBJS = @LIBOBJS@
358LIBREVISION = @LIBREVISION@
359LIBS = @LIBS@
360LIBTOOL = @LIBTOOL@
361LIPO = @LIPO@
362LN_S = @LN_S@
363LTLIBOBJS = @LTLIBOBJS@
364LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
365MAINT = @MAINT@
366MAKEINFO = @MAKEINFO@
367MANIFEST_TOOL = @MANIFEST_TOOL@
368MKDIR_P = @MKDIR_P@
369NM = @NM@
370NMEDIT = @NMEDIT@
371OBJDUMP = @OBJDUMP@
372OBJEXT = @OBJEXT@
373OTOOL = @OTOOL@
374OTOOL64 = @OTOOL64@
375PACKAGE = @PACKAGE@
376PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
377PACKAGE_NAME = @PACKAGE_NAME@
378PACKAGE_STRING = @PACKAGE_STRING@
379PACKAGE_TARNAME = @PACKAGE_TARNAME@
380PACKAGE_URL = @PACKAGE_URL@
381PACKAGE_VERSION = @PACKAGE_VERSION@
382PATH_SEPARATOR = @PATH_SEPARATOR@
383RANLIB = @RANLIB@
384SED = @SED@
385SET_MAKE = @SET_MAKE@
386SHELL = @SHELL@
387SO_MAJOR = @SO_MAJOR@
388SO_MINOR = @SO_MINOR@
389SO_PATCH = @SO_PATCH@
390STRIP = @STRIP@
391VERSION = @VERSION@
392abs_builddir = @abs_builddir@
393abs_srcdir = @abs_srcdir@
394abs_top_builddir = @abs_top_builddir@
395abs_top_srcdir = @abs_top_srcdir@
396ac_ct_AR = @ac_ct_AR@
397ac_ct_CC = @ac_ct_CC@
398ac_ct_CXX = @ac_ct_CXX@
399ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
400ac_cv_sizeof_void_p = @ac_cv_sizeof_void_p@
401am__include = @am__include@
402am__leading_dot = @am__leading_dot@
403am__quote = @am__quote@
404am__tar = @am__tar@
405am__untar = @am__untar@
406bindir = @bindir@
407build = @build@
408build_alias = @build_alias@
409build_cpu = @build_cpu@
410build_os = @build_os@
411build_vendor = @build_vendor@
412builddir = @builddir@
413datadir = @datadir@
414datarootdir = @datarootdir@
415docdir = @docdir@
416dvidir = @dvidir@
417exec_prefix = @exec_prefix@
418host = @host@
419host_alias = @host_alias@
420host_cpu = @host_cpu@
421host_os = @host_os@
422host_vendor = @host_vendor@
423htmldir = @htmldir@
424includedir = @includedir@
425infodir = @infodir@
426install_sh = @install_sh@
427libdir = @libdir@
428libexecdir = @libexecdir@
429localedir = @localedir@
430localstatedir = @localstatedir@
431mandir = @mandir@
432mkdir_p = @mkdir_p@
433oldincludedir = @oldincludedir@
434pdfdir = @pdfdir@
435prefix = @prefix@
436program_transform_name = @program_transform_name@
437psdir = @psdir@
438runstatedir = @runstatedir@
439sbindir = @sbindir@
440sharedstatedir = @sharedstatedir@
441srcdir = @srcdir@
442sysconfdir = @sysconfdir@
443target_alias = @target_alias@
444top_build_prefix = @top_build_prefix@
445top_builddir = @top_builddir@
446top_srcdir = @top_srcdir@
447AUTOMAKE_OPTIONS = \
448    dist-bzip2 \
449    dist-lzip \
450    dist-xz \
451    foreign \
452    subdir-objects
453
454ACLOCAL_AMFLAGS = -I m4
455LIBTOOLFLAGS = --verbose
456SUBDIRS = lib $(am__append_1) $(am__append_2) $(am__append_3)
457pkgconfig_DATA = expat.pc
458pkgconfigdir = $(libdir)/pkgconfig
459dist_cmake_DATA = \
460    cmake/autotools/expat.cmake
461
462nodist_cmake_DATA = \
463    cmake/autotools/expat-config-version.cmake \
464    cmake/autotools/expat-noconfig.cmake \
465    cmake/expat-config.cmake
466
467cmakedir = $(libdir)/cmake/expat-@PACKAGE_VERSION@
468_EXTRA_DIST_CMAKE = \
469    cmake/autotools/expat-noconfig__linux.cmake.in \
470    cmake/autotools/expat-noconfig__macos.cmake.in \
471    cmake/autotools/expat-noconfig__windows.cmake.in \
472    cmake/autotools/expat-package-init.cmake \
473    cmake/mingw-toolchain.cmake \
474    \
475    CMakeLists.txt \
476    CMake.README \
477    ConfigureChecks.cmake \
478    expat.pc.cmake \
479    expat_config.h.cmake
480
481_EXTRA_DIST_WINDOWS = \
482    win32/build_expat_iss.bat \
483    win32/expat.iss \
484    win32/MANIFEST.txt \
485    win32/README.txt \
486    win32/version.rc.cmake
487
488EXTRA_DIST = \
489    $(_EXTRA_DIST_CMAKE) \
490    $(_EXTRA_DIST_WINDOWS) \
491    \
492    conftools/expat.m4 \
493    conftools/get-version.sh \
494    \
495    fuzz/xml_parsebuffer_fuzzer.c \
496    fuzz/xml_parse_fuzzer.c \
497    \
498    xmlwf/xmlwf_helpgen.py \
499    xmlwf/xmlwf_helpgen.sh \
500    \
501    buildconf.sh \
502    Changes \
503    README.md \
504    \
505    fix-xmltest-log.sh \
506    test-driver-wrapper.sh
507
508all: expat_config.h
509	$(MAKE) $(AM_MAKEFLAGS) all-recursive
510
511.SUFFIXES:
512am--refresh: Makefile
513	@:
514$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
515	@for dep in $?; do \
516	  case '$(am__configure_deps)' in \
517	    *$$dep*) \
518	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
519	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
520		&& exit 0; \
521	      exit 1;; \
522	  esac; \
523	done; \
524	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
525	$(am__cd) $(top_srcdir) && \
526	  $(AUTOMAKE) --foreign Makefile
527Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
528	@case '$?' in \
529	  *config.status*) \
530	    echo ' $(SHELL) ./config.status'; \
531	    $(SHELL) ./config.status;; \
532	  *) \
533	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
534	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
535	esac;
536
537$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
538	$(SHELL) ./config.status --recheck
539
540$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
541	$(am__cd) $(srcdir) && $(AUTOCONF)
542$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
543	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
544$(am__aclocal_m4_deps):
545
546expat_config.h: stamp-h1
547	@test -f $@ || rm -f stamp-h1
548	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
549
550stamp-h1: $(srcdir)/expat_config.h.in $(top_builddir)/config.status
551	@rm -f stamp-h1
552	cd $(top_builddir) && $(SHELL) ./config.status expat_config.h
553$(srcdir)/expat_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
554	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
555	rm -f stamp-h1
556	touch $@
557
558distclean-hdr:
559	-rm -f expat_config.h stamp-h1
560expat.pc: $(top_builddir)/config.status $(srcdir)/expat.pc.in
561	cd $(top_builddir) && $(SHELL) ./config.status $@
562cmake/expat-config.cmake: $(top_builddir)/config.status $(top_srcdir)/cmake/expat-config.cmake.in
563	cd $(top_builddir) && $(SHELL) ./config.status $@
564cmake/autotools/expat-config-version.cmake: $(top_builddir)/config.status $(top_srcdir)/cmake/autotools/expat-config-version.cmake.in
565	cd $(top_builddir) && $(SHELL) ./config.status $@
566cmake/autotools/expat-noconfig.cmake: $(top_builddir)/config.status
567	cd $(top_builddir) && $(SHELL) ./config.status $@
568run.sh: $(top_builddir)/config.status $(srcdir)/run.sh.in
569	cd $(top_builddir) && $(SHELL) ./config.status $@
570
571mostlyclean-libtool:
572	-rm -f *.lo
573
574clean-libtool:
575	-rm -rf .libs _libs
576
577distclean-libtool:
578	-rm -f libtool config.lt
579install-dist_cmakeDATA: $(dist_cmake_DATA)
580	@$(NORMAL_INSTALL)
581	@list='$(dist_cmake_DATA)'; test -n "$(cmakedir)" || list=; \
582	if test -n "$$list"; then \
583	  echo " $(MKDIR_P) '$(DESTDIR)$(cmakedir)'"; \
584	  $(MKDIR_P) "$(DESTDIR)$(cmakedir)" || exit 1; \
585	fi; \
586	for p in $$list; do \
587	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
588	  echo "$$d$$p"; \
589	done | $(am__base_list) | \
590	while read files; do \
591	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cmakedir)'"; \
592	  $(INSTALL_DATA) $$files "$(DESTDIR)$(cmakedir)" || exit $$?; \
593	done
594
595uninstall-dist_cmakeDATA:
596	@$(NORMAL_UNINSTALL)
597	@list='$(dist_cmake_DATA)'; test -n "$(cmakedir)" || list=; \
598	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
599	dir='$(DESTDIR)$(cmakedir)'; $(am__uninstall_files_from_dir)
600install-nodist_cmakeDATA: $(nodist_cmake_DATA)
601	@$(NORMAL_INSTALL)
602	@list='$(nodist_cmake_DATA)'; test -n "$(cmakedir)" || list=; \
603	if test -n "$$list"; then \
604	  echo " $(MKDIR_P) '$(DESTDIR)$(cmakedir)'"; \
605	  $(MKDIR_P) "$(DESTDIR)$(cmakedir)" || exit 1; \
606	fi; \
607	for p in $$list; do \
608	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
609	  echo "$$d$$p"; \
610	done | $(am__base_list) | \
611	while read files; do \
612	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cmakedir)'"; \
613	  $(INSTALL_DATA) $$files "$(DESTDIR)$(cmakedir)" || exit $$?; \
614	done
615
616uninstall-nodist_cmakeDATA:
617	@$(NORMAL_UNINSTALL)
618	@list='$(nodist_cmake_DATA)'; test -n "$(cmakedir)" || list=; \
619	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
620	dir='$(DESTDIR)$(cmakedir)'; $(am__uninstall_files_from_dir)
621install-pkgconfigDATA: $(pkgconfig_DATA)
622	@$(NORMAL_INSTALL)
623	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
624	if test -n "$$list"; then \
625	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
626	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
627	fi; \
628	for p in $$list; do \
629	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
630	  echo "$$d$$p"; \
631	done | $(am__base_list) | \
632	while read files; do \
633	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
634	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
635	done
636
637uninstall-pkgconfigDATA:
638	@$(NORMAL_UNINSTALL)
639	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
640	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
641	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
642
643# This directory's subdirectories are mostly independent; you can cd
644# into them and run 'make' without going through this Makefile.
645# To change the values of 'make' variables: instead of editing Makefiles,
646# (1) if the variable is set in 'config.status', edit 'config.status'
647#     (which will cause the Makefiles to be regenerated when you run 'make');
648# (2) otherwise, pass the desired values on the 'make' command line.
649$(am__recursive_targets):
650	@fail=; \
651	if $(am__make_keepgoing); then \
652	  failcom='fail=yes'; \
653	else \
654	  failcom='exit 1'; \
655	fi; \
656	dot_seen=no; \
657	target=`echo $@ | sed s/-recursive//`; \
658	case "$@" in \
659	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
660	  *) list='$(SUBDIRS)' ;; \
661	esac; \
662	for subdir in $$list; do \
663	  echo "Making $$target in $$subdir"; \
664	  if test "$$subdir" = "."; then \
665	    dot_seen=yes; \
666	    local_target="$$target-am"; \
667	  else \
668	    local_target="$$target"; \
669	  fi; \
670	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
671	  || eval $$failcom; \
672	done; \
673	if test "$$dot_seen" = "no"; then \
674	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
675	fi; test -z "$$fail"
676
677ID: $(am__tagged_files)
678	$(am__define_uniq_tagged_files); mkid -fID $$unique
679tags: tags-recursive
680TAGS: tags
681
682tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
683	set x; \
684	here=`pwd`; \
685	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
686	  include_option=--etags-include; \
687	  empty_fix=.; \
688	else \
689	  include_option=--include; \
690	  empty_fix=; \
691	fi; \
692	list='$(SUBDIRS)'; for subdir in $$list; do \
693	  if test "$$subdir" = .; then :; else \
694	    test ! -f $$subdir/TAGS || \
695	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
696	  fi; \
697	done; \
698	$(am__define_uniq_tagged_files); \
699	shift; \
700	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
701	  test -n "$$unique" || unique=$$empty_fix; \
702	  if test $$# -gt 0; then \
703	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
704	      "$$@" $$unique; \
705	  else \
706	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
707	      $$unique; \
708	  fi; \
709	fi
710ctags: ctags-recursive
711
712CTAGS: ctags
713ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
714	$(am__define_uniq_tagged_files); \
715	test -z "$(CTAGS_ARGS)$$unique" \
716	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
717	     $$unique
718
719GTAGS:
720	here=`$(am__cd) $(top_builddir) && pwd` \
721	  && $(am__cd) $(top_srcdir) \
722	  && gtags -i $(GTAGS_ARGS) "$$here"
723cscope: cscope.files
724	test ! -s cscope.files \
725	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
726clean-cscope:
727	-rm -f cscope.files
728cscope.files: clean-cscope cscopelist
729cscopelist: cscopelist-recursive
730
731cscopelist-am: $(am__tagged_files)
732	list='$(am__tagged_files)'; \
733	case "$(srcdir)" in \
734	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
735	  *) sdir=$(subdir)/$(srcdir) ;; \
736	esac; \
737	for i in $$list; do \
738	  if test -f "$$i"; then \
739	    echo "$(subdir)/$$i"; \
740	  else \
741	    echo "$$sdir/$$i"; \
742	  fi; \
743	done >> $(top_builddir)/cscope.files
744
745distclean-tags:
746	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
747	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
748distdir: $(BUILT_SOURCES)
749	$(MAKE) $(AM_MAKEFLAGS) distdir-am
750
751distdir-am: $(DISTFILES)
752	$(am__remove_distdir)
753	test -d "$(distdir)" || mkdir "$(distdir)"
754	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
755	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
756	list='$(DISTFILES)'; \
757	  dist_files=`for file in $$list; do echo $$file; done | \
758	  sed -e "s|^$$srcdirstrip/||;t" \
759	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
760	case $$dist_files in \
761	  */*) $(MKDIR_P) `echo "$$dist_files" | \
762			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
763			   sort -u` ;; \
764	esac; \
765	for file in $$dist_files; do \
766	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
767	  if test -d $$d/$$file; then \
768	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
769	    if test -d "$(distdir)/$$file"; then \
770	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
771	    fi; \
772	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
773	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
774	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
775	    fi; \
776	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
777	  else \
778	    test -f "$(distdir)/$$file" \
779	    || cp -p $$d/$$file "$(distdir)/$$file" \
780	    || exit 1; \
781	  fi; \
782	done
783	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
784	  if test "$$subdir" = .; then :; else \
785	    $(am__make_dryrun) \
786	      || test -d "$(distdir)/$$subdir" \
787	      || $(MKDIR_P) "$(distdir)/$$subdir" \
788	      || exit 1; \
789	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
790	    $(am__relativize); \
791	    new_distdir=$$reldir; \
792	    dir1=$$subdir; dir2="$(top_distdir)"; \
793	    $(am__relativize); \
794	    new_top_distdir=$$reldir; \
795	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
796	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
797	    ($(am__cd) $$subdir && \
798	      $(MAKE) $(AM_MAKEFLAGS) \
799	        top_distdir="$$new_top_distdir" \
800	        distdir="$$new_distdir" \
801		am__remove_distdir=: \
802		am__skip_length_check=: \
803		am__skip_mode_fix=: \
804	        distdir) \
805	      || exit 1; \
806	  fi; \
807	done
808	-test -n "$(am__skip_mode_fix)" \
809	|| find "$(distdir)" -type d ! -perm -755 \
810		-exec chmod u+rwx,go+rx {} \; -o \
811	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
812	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
813	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
814	|| chmod -R a+r "$(distdir)"
815dist-gzip: distdir
816	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
817	$(am__post_remove_distdir)
818dist-bzip2: distdir
819	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
820	$(am__post_remove_distdir)
821dist-lzip: distdir
822	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
823	$(am__post_remove_distdir)
824dist-xz: distdir
825	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
826	$(am__post_remove_distdir)
827
828dist-zstd: distdir
829	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
830	$(am__post_remove_distdir)
831
832dist-tarZ: distdir
833	@echo WARNING: "Support for distribution archives compressed with" \
834		       "legacy program 'compress' is deprecated." >&2
835	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
836	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
837	$(am__post_remove_distdir)
838
839dist-shar: distdir
840	@echo WARNING: "Support for shar distribution archives is" \
841	               "deprecated." >&2
842	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
843	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
844	$(am__post_remove_distdir)
845
846dist-zip: distdir
847	-rm -f $(distdir).zip
848	zip -rq $(distdir).zip $(distdir)
849	$(am__post_remove_distdir)
850
851dist dist-all:
852	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
853	$(am__post_remove_distdir)
854
855# This target untars the dist file and tries a VPATH configuration.  Then
856# it guarantees that the distribution is self-contained by making another
857# tarfile.
858distcheck: dist
859	case '$(DIST_ARCHIVES)' in \
860	*.tar.gz*) \
861	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
862	*.tar.bz2*) \
863	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
864	*.tar.lz*) \
865	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
866	*.tar.xz*) \
867	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
868	*.tar.Z*) \
869	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
870	*.shar.gz*) \
871	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
872	*.zip*) \
873	  unzip $(distdir).zip ;;\
874	*.tar.zst*) \
875	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
876	esac
877	chmod -R a-w $(distdir)
878	chmod u+w $(distdir)
879	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
880	chmod a-w $(distdir)
881	test -d $(distdir)/_build || exit 0; \
882	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
883	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
884	  && am__cwd=`pwd` \
885	  && $(am__cd) $(distdir)/_build/sub \
886	  && ../../configure \
887	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
888	    $(DISTCHECK_CONFIGURE_FLAGS) \
889	    --srcdir=../.. --prefix="$$dc_install_base" \
890	  && $(MAKE) $(AM_MAKEFLAGS) \
891	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
892	  && $(MAKE) $(AM_MAKEFLAGS) check \
893	  && $(MAKE) $(AM_MAKEFLAGS) install \
894	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
895	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
896	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
897	        distuninstallcheck \
898	  && chmod -R a-w "$$dc_install_base" \
899	  && ({ \
900	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
901	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
902	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
903	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
904	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
905	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
906	  && rm -rf "$$dc_destdir" \
907	  && $(MAKE) $(AM_MAKEFLAGS) dist \
908	  && rm -rf $(DIST_ARCHIVES) \
909	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
910	  && cd "$$am__cwd" \
911	  || exit 1
912	$(am__post_remove_distdir)
913	@(echo "$(distdir) archives ready for distribution: "; \
914	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
915	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
916distuninstallcheck:
917	@test -n '$(distuninstallcheck_dir)' || { \
918	  echo 'ERROR: trying to run $@ with an empty' \
919	       '$$(distuninstallcheck_dir)' >&2; \
920	  exit 1; \
921	}; \
922	$(am__cd) '$(distuninstallcheck_dir)' || { \
923	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
924	  exit 1; \
925	}; \
926	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
927	   || { echo "ERROR: files left after uninstall:" ; \
928	        if test -n "$(DESTDIR)"; then \
929	          echo "  (check DESTDIR support)"; \
930	        fi ; \
931	        $(distuninstallcheck_listfiles) ; \
932	        exit 1; } >&2
933distcleancheck: distclean
934	@if test '$(srcdir)' = . ; then \
935	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
936	  exit 1 ; \
937	fi
938	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
939	  || { echo "ERROR: files left in build directory after distclean:" ; \
940	       $(distcleancheck_listfiles) ; \
941	       exit 1; } >&2
942check-am: all-am
943check: check-recursive
944all-am: Makefile $(DATA) expat_config.h
945installdirs: installdirs-recursive
946installdirs-am:
947	for dir in "$(DESTDIR)$(cmakedir)" "$(DESTDIR)$(cmakedir)" "$(DESTDIR)$(pkgconfigdir)"; do \
948	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
949	done
950install: install-recursive
951install-exec: install-exec-recursive
952install-data: install-data-recursive
953uninstall: uninstall-recursive
954
955install-am: all-am
956	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
957
958installcheck: installcheck-recursive
959install-strip:
960	if test -z '$(STRIP)'; then \
961	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
962	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
963	      install; \
964	else \
965	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
966	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
967	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
968	fi
969mostlyclean-generic:
970
971clean-generic:
972
973distclean-generic:
974	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
975	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
976
977maintainer-clean-generic:
978	@echo "This command is intended for maintainers to use"
979	@echo "it deletes files that may require special tools to rebuild."
980clean: clean-recursive
981
982clean-am: clean-generic clean-libtool mostlyclean-am
983
984distclean: distclean-recursive
985	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
986	-rm -f Makefile
987distclean-am: clean-am distclean-generic distclean-hdr \
988	distclean-libtool distclean-tags
989
990dvi: dvi-recursive
991
992dvi-am:
993
994html: html-recursive
995
996html-am:
997
998info: info-recursive
999
1000info-am:
1001
1002install-data-am: install-dist_cmakeDATA install-nodist_cmakeDATA \
1003	install-pkgconfigDATA
1004
1005install-dvi: install-dvi-recursive
1006
1007install-dvi-am:
1008
1009install-exec-am:
1010
1011install-html: install-html-recursive
1012
1013install-html-am:
1014
1015install-info: install-info-recursive
1016
1017install-info-am:
1018
1019install-man:
1020
1021install-pdf: install-pdf-recursive
1022
1023install-pdf-am:
1024
1025install-ps: install-ps-recursive
1026
1027install-ps-am:
1028
1029installcheck-am:
1030
1031maintainer-clean: maintainer-clean-recursive
1032	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1033	-rm -rf $(top_srcdir)/autom4te.cache
1034	-rm -f Makefile
1035maintainer-clean-am: distclean-am maintainer-clean-generic
1036
1037mostlyclean: mostlyclean-recursive
1038
1039mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1040
1041pdf: pdf-recursive
1042
1043pdf-am:
1044
1045ps: ps-recursive
1046
1047ps-am:
1048
1049uninstall-am: uninstall-dist_cmakeDATA uninstall-nodist_cmakeDATA \
1050	uninstall-pkgconfigDATA
1051
1052.MAKE: $(am__recursive_targets) all install-am install-strip
1053
1054.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1055	am--refresh check check-am clean clean-cscope clean-generic \
1056	clean-libtool cscope cscopelist-am ctags ctags-am dist \
1057	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
1058	dist-xz dist-zip dist-zstd distcheck distclean \
1059	distclean-generic distclean-hdr distclean-libtool \
1060	distclean-tags distcleancheck distdir distuninstallcheck dvi \
1061	dvi-am html html-am info info-am install install-am \
1062	install-data install-data-am install-dist_cmakeDATA \
1063	install-dvi install-dvi-am install-exec install-exec-am \
1064	install-html install-html-am install-info install-info-am \
1065	install-man install-nodist_cmakeDATA install-pdf \
1066	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
1067	install-strip installcheck installcheck-am installdirs \
1068	installdirs-am maintainer-clean maintainer-clean-generic \
1069	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1070	ps ps-am tags tags-am uninstall uninstall-am \
1071	uninstall-dist_cmakeDATA uninstall-nodist_cmakeDATA \
1072	uninstall-pkgconfigDATA
1073
1074.PRECIOUS: Makefile
1075
1076
1077.PHONY: buildlib
1078buildlib:
1079	@echo 'ERROR: Running "make buildlib LIBRARY=libexpatw.la"' >&2
1080	@echo 'ERROR: is no longer supported.  INSTEAD please:' >&2
1081	@echo 'ERROR:' >&2
1082	@echo 'ERROR:  * Mass-patch Makefile.am, e.g.' >&2
1083	@echo 'ERROR:    # find -name Makefile.am -exec sed \' >&2
1084	@echo 'ERROR:          -e "s,libexpat\.la,libexpatw.la," \' >&2
1085	@echo 'ERROR:          -e "s,libexpat_la,libexpatw_la," \' >&2
1086	@echo 'ERROR:          -i {} +' >&2
1087	@echo 'ERROR:' >&2
1088	@echo 'ERROR:  * Run automake to re-generate Makefile.in files' >&2
1089	@echo 'ERROR:' >&2
1090	@echo 'ERROR:  * Use "./configure --without-xmlwf" and/or' >&2
1091	@echo 'ERROR:    "make -C lib all install" to bypass compilation' >&2
1092	@echo 'ERROR:    of xmlwf (e.g. with -DXML_UNICODE)' >&2
1093	@echo 'ERROR:' >&2
1094	@false
1095
1096.PHONY: run-benchmark
1097run-benchmark:
1098	$(MAKE) -C tests/benchmark
1099	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/recset.xml 65535 3
1100	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/aaaaaa_attr.xml 4096 3
1101	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/aaaaaa_cdata.xml 4096 3
1102	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/aaaaaa_comment.xml 4096 3
1103	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/aaaaaa_tag.xml 4096 3
1104	./run.sh tests/benchmark/benchmark@EXEEXT@ -n $(top_srcdir)/../testdata/largefiles/aaaaaa_text.xml 4096 3
1105
1106.PHONY: download-xmlts-zip
1107download-xmlts-zip:
1108	if test "$(XMLTS_ZIP)" = ""; then \
1109		wget --output-document=tests/xmlts.zip \
1110			https://www.w3.org/XML/Test/xmlts20080827.zip; \
1111	else \
1112		cp $(XMLTS_ZIP) tests/xmlts.zip; \
1113	fi
1114
1115tests/xmlts.zip:
1116	$(MAKE) download-xmlts-zip
1117
1118.PHONY: extract-xmlts-zip
1119extract-xmlts-zip: tests/xmlts.zip
1120	[ -f $(builddir)/tests/xmlts.zip ] || $(MAKE) download-xmlts-zip  # vpath workaround
1121	cd tests && unzip -q xmlts.zip
1122
1123tests/xmlconf: tests/xmlts.zip
1124	$(MAKE) extract-xmlts-zip
1125
1126.PHONY: run-xmltest
1127run-xmltest: tests/xmlconf
1128@WITH_XMLWF_TRUE@	[ -d $(builddir)/tests/xmlconf ] || $(MAKE) extract-xmlts-zip  # vpath workaround
1129@WITH_XMLWF_TRUE@	$(MAKE) -C lib
1130@WITH_XMLWF_TRUE@	$(MAKE) -C xmlwf
1131@WITH_XMLWF_TRUE@	$(srcdir)/tests/xmltest.sh "$(abs_builddir)/run.sh $(abs_builddir)/xmlwf/xmlwf@EXEEXT@" 2>&1 | tee $(builddir)/tests/xmltest.log
1132@WITH_XMLWF_TRUE@	$(srcdir)/fix-xmltest-log.sh $(builddir)/tests/xmltest.log
1133@WITH_XMLWF_TRUE@	diff -u $(srcdir)/tests/xmltest.log.expected $(builddir)/tests/xmltest.log
1134@WITH_XMLWF_FALSE@	@echo 'ERROR: xmlwf is needed for "make run-xmltest".' >&2
1135@WITH_XMLWF_FALSE@	@echo 'ERROR: Please re-configure without --without-xmlwf.' >&2
1136@WITH_XMLWF_FALSE@	@false
1137
1138.PHONY: qa
1139qa:
1140	QA_COMPILER=clang QA_SANITIZER=address   ./qa.sh
1141	QA_COMPILER=clang QA_SANITIZER=memory    ./qa.sh
1142	QA_COMPILER=clang QA_SANITIZER=undefined ./qa.sh
1143	QA_COMPILER=gcc   QA_PROCESSOR=gcov      ./qa.sh
1144
1145# Tell versions [3.59,3.63) of GNU make to not export all variables.
1146# Otherwise a system limit (for SysV at least) may be exceeded.
1147.NOEXPORT:
1148