1# $Id: dirdeps.mk,v 1.160 2023/05/10 20:44:58 sjg Exp $ 2 3# SPDX-License-Identifier: BSD-2-Clause 4# 5# Copyright (c) 2010-2023, Simon J. Gerraty 6# Copyright (c) 2010-2018, Juniper Networks, Inc. 7# All rights reserved. 8# 9# Redistribution and use in source and binary forms, with or without 10# modification, are permitted provided that the following conditions 11# are met: 12# 1. Redistributions of source code must retain the above copyright 13# notice, this list of conditions and the following disclaimer. 14# 2. Redistributions in binary form must reproduce the above copyright 15# notice, this list of conditions and the following disclaimer in the 16# documentation and/or other materials provided with the distribution. 17# 18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 20# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 21# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 22# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 23# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 24# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 28# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 30# Much of the complexity here is for supporting cross-building. 31# If a tree does not support that, simply using plain Makefile.depend 32# should provide sufficient clue. 33# Otherwise the recommendation is to use Makefile.depend.${MACHINE} 34# as expected below. 35 36# Note: this file gets multiply included. 37# This is what we do with DIRDEPS 38 39# DIRDEPS: 40# This is a list of directories - relative to SRCTOP, it is 41# normally only of interest to .MAKE.LEVEL 0. 42# In some cases the entry may be qualified with a .<machine> 43# or .<target_spec> suffix (see TARGET_SPEC_VARS below), 44# for example to force building something for the pseudo 45# machines "host" or "common" regardless of current ${MACHINE}. 46# 47# All unqualified entries end up being qualified with .${TARGET_SPEC} 48# and partially qualified (if TARGET_SPEC_VARS has multiple 49# entries) are also expanded to a full .<target_spec>. 50# The _DIRDEP_USE target uses the suffix to set TARGET_SPEC 51# correctly when visiting each entry. 52# 53# The fully qualified directory entries are used to construct a 54# dependency graph that will drive the build later. 55# 56# Also, for each fully qualified directory target, we will search 57# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional 58# dependencies. We use Makefile.depend (default value for 59# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to 60# distinguish them from others. 61# 62# Before each Makefile.depend file is read, we set 63# DEP_RELDIR to be the RELDIR (path relative to SRCTOP) for 64# its directory, and DEP_MACHINE etc according to the .<target_spec> 65# represented by the suffix of the corresponding target. 66# 67# Since each Makefile.depend file includes dirdeps.mk, this 68# processing is recursive and results in .MAKE.LEVEL 0 learning the 69# dependencies of the tree wrt the initial directory (_DEP_RELDIR). 70# 71# NOTE: given the extent of processing that DIRDEPS undergoes it 72# is important that any variables in entries use :U to guard 73# against surprises when undefined. 74# 75# TARGET_SPEC_VARS 76# The default value is just MACHINE, and for most environments 77# this is sufficient. The _DIRDEP_USE target actually sets 78# both MACHINE and TARGET_SPEC to the suffix of the current 79# target so that in the general case TARGET_SPEC can be ignored. 80# 81# If more than MACHINE is needed then sys.mk needs to decompose 82# TARGET_SPEC and set the relevant variables accordingly. 83# It is important that MACHINE be included in and actually be 84# the first member of TARGET_SPEC_VARS. This allows other 85# variables to be considered optional, and some of the treatment 86# below relies on MACHINE being the first entry. 87# Note: TARGET_SPEC cannot contain any '.'s so the target 88# triple used by compiler folk won't work (directly anyway). 89# 90# For example: 91# 92# # Always list MACHINE first, 93# # other variables might be optional. 94# TARGET_SPEC_VARS = MACHINE TARGET_OS 95# .if ${TARGET_SPEC:Uno:M*,*} != "" 96# _tspec := ${TARGET_SPEC:S/,/ /g} 97# MACHINE := ${_tspec:[1]} 98# TARGET_OS := ${_tspec:[2]} 99# # etc. 100# # We need to stop that TARGET_SPEC affecting any submakes 101# # and deal with MACHINE=${TARGET_SPEC} in the environment. 102# TARGET_SPEC = 103# # export but do not track 104# .export-env TARGET_SPEC 105# .export ${TARGET_SPEC_VARS} 106# .for v in ${TARGET_SPEC_VARS:O:u} 107# .if empty($v) 108# .undef $v 109# .endif 110# .endfor 111# .endif 112# # make sure we know what TARGET_SPEC is 113# # as we may need it to find Makefile.depend* 114# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 115# 116# The following variables can influence the initial DIRDEPS 117# computation with regard to the TARGET_SPECs that will be 118# built. 119# Most should also be considered by init.mk 120# 121# ONLY_TARGET_SPEC_LIST 122# Defines a list of TARGET_SPECs for which the current 123# directory can be built. 124# If ALL_MACHINES is defined, we build for all the 125# TARGET_SPECs listed. 126# 127# ONLY_MACHINE_LIST 128# As for ONLY_TARGET_SPEC_LIST but only specifies 129# MACHINEs. 130# 131# NOT_TARGET_SPEC_LIST 132# A list of TARGET_SPECs for which the current 133# directory should not be built. 134# 135# NOT_MACHINE_LIST 136# A list of MACHINEs the current directory should not be 137# built for. 138# 139# DIRDEPS_EXPORT_VARS (DEP_EXPORT_VARS) 140# It is discouraged, but sometimes necessary for a 141# Makefile.depend file to influence the environment. 142# Doing this is correctly (especially if using DIRDEPS_CACHE) is 143# tricky so a Makefile.depend file can set DIRDEPS_EXPORT_VARS 144# and dirdeps.mk will do the deed: 145# 146# MK_UEFI = yes 147# DIRDEPS_EXPORT_VARS = MK_UEFI 148# 149# _build_xtra_dirs 150# local.dirdeps.mk can add targets to this variable. 151# They will be hooked into the build, but independent of 152# any other DIRDEP. 153# 154# This allows for adding TESTS to the build, such that the build 155# if any test fails, but without the risk of introducing 156# circular dependencies. 157 158now_utc ?= ${%s:L:gmtime} 159.if !defined(start_utc) 160start_utc := ${now_utc} 161.endif 162 163.if !target(bootstrap) && (make(bootstrap) || \ 164 make(bootstrap-this) || \ 165 make(bootstrap-recurse) || \ 166 make(bootstrap-empty)) 167# disable most of below 168.MAKE.LEVEL = 1 169.endif 170 171# touch this at your peril 172_DIRDEP_USE_LEVEL?= 0 173.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL} 174# only the first instance is interested in all this 175 176# the first time we are included the _DIRDEP_USE target will not be defined 177# we can use this as a clue to do initialization and other one time things. 178.if !target(_DIRDEP_USE) 179 180# do some setup we only need once 181_CURDIR ?= ${.CURDIR} 182_OBJDIR ?= ${.OBJDIR} 183 184.if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*[/.]*} != "" 185# This little trick let's us do 186# 187# mk -f dirdeps.mk some/dir.${TARGET_SPEC} 188# 189all: 190${.TARGETS:Nall}: all 191DIRDEPS := ${.TARGETS:M*[/.]*} 192# so that -DNO_DIRDEPS works 193DEP_RELDIR := ${DIRDEPS:[1]:R} 194# this will become DEP_MACHINE below 195TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//} 196.if ${TARGET_MACHINE:N*/*} == "" 197TARGET_MACHINE := ${MACHINE} 198.endif 199# disable DIRDEPS_CACHE as it does not like this trick 200MK_DIRDEPS_CACHE = no 201# incase anyone needs to know 202_dirdeps_cmdline: 203.endif 204 205# make sure we get the behavior we expect 206.MAKE.SAVE_DOLLARS = no 207 208# make sure these are empty to start with 209_DEP_TARGET_SPEC = 210 211# If TARGET_SPEC_VARS is other than just MACHINE 212# it should be set by sys.mk or similar by now. 213# TARGET_SPEC must not contain any '.'s. 214TARGET_SPEC_VARS ?= MACHINE 215# this is what we started with 216TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 217# this is what we mostly use below 218DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,} 219# make sure we have defaults 220.for v in ${TARGET_SPEC_VARS} 221DEP_$v ?= ${$v} 222.endfor 223 224.if ${TARGET_SPEC_VARS:[#]} > 1 225# Ok, this gets more complex (putting it mildly). 226# In order to stay sane, we need to ensure that all the build_dirs 227# we compute below are fully qualified wrt DEP_TARGET_SPEC. 228# The makefiles may only partially specify (eg. MACHINE only), 229# so we need to construct a set of modifiers to fill in the gaps. 230.if ${MAKE_VERSION} >= 20170130 231_tspec_x := ${TARGET_SPEC_VARS:range} 232.else 233# do it the hard way 234_tspec_x := ${TARGET_SPEC_VARS:[#]:@x@i=1;while [ $$i -le $x ]; do echo $$i; i=$$((i + 1)); done;@:sh} 235.endif 236# this handles unqualified entries 237M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC}; 238# there needs to be at least one item missing for these to make sense 239.for i in ${_tspec_x:[2..-1]} 240_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,} 241_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,} 242M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i}; 243.endfor 244TARGET_SPEC_VARSr := ${TARGET_SPEC_VARS:[-1..1]} 245.else 246# A harmless? default. 247M_dep_qual_fixes = U 248.endif 249 250.if !defined(.MAKE.DEPENDFILE_PREFERENCE) 251# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater? 252# you really want this set by sys.mk or similar 253.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T} 254.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}" 255.if ${TARGET_SPEC} != ${MACHINE} 256.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE} 257.endif 258.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R} 259.endif 260.endif 261 262_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T} 263_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*} 264 265# for machine specific dependfiles we require ${MACHINE} to be at the end 266# also for the sake of sanity we require a common prefix 267.if !defined(.MAKE.DEPENDFILE_PREFIX) 268# knowing .MAKE.DEPENDFILE_PREFIX helps 269.if !empty(_machine_dependfiles) 270.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R} 271.else 272.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T} 273.endif 274.endif 275 276# turn a list into a set of :N modifiers 277# NskipFoo = ${Foo:${M_ListToSkip}} 278M_ListToSkip ?= O:u:S,^,N,:ts: 279 280# this is how we identify non-machine specific dependfiles 281N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}} 282 283# this gets reset for each dirdep we check 284DEP_RELDIR ?= ${RELDIR} 285 286# remember the initial value of DEP_RELDIR - we test for it below. 287_DEP_RELDIR := ${DEP_RELDIR} 288 289# this can cause lots of output! 290# set to a set of glob expressions that might match RELDIR 291DEBUG_DIRDEPS ?= no 292 293# make sure this target exists 294dirdeps: beforedirdeps .WAIT 295beforedirdeps: 296 297.endif # !target(_DIRDEP_USE) 298 299.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != "" 300_debug_reldir = 1 301.else 302_debug_reldir = 0 303.endif 304.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend depend:L:M$x}@} != "" 305_debug_search = 1 306.else 307_debug_search = 0 308.endif 309 310# First off, we want to know what ${MACHINE} to build for. 311# This can be complicated if we are using a mixture of ${MACHINE} specific 312# and non-specific Makefile.depend* 313 314# if we were included recursively _DEP_TARGET_SPEC should be valid. 315.if empty(_DEP_TARGET_SPEC) 316DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}} 317_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC} 318.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" 319# record that we've read dependfile for this 320_dirdeps_checked.${_CURDIR}.${TARGET_SPEC}: 321.endif 322.endif 323 324# by now _DEP_TARGET_SPEC should be set, parse it. 325.if ${TARGET_SPEC_VARS:[#]} > 1 326# we need to parse DEP_MACHINE may or may not contain more info 327_tspec := ${_DEP_TARGET_SPEC:S/,/ /g} 328.for i in ${_tspec_x} 329DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]} 330.endfor 331.for v in ${TARGET_SPEC_VARS:O:u} 332.if empty(DEP_$v) 333.undef DEP_$v 334.endif 335.endfor 336.else 337DEP_MACHINE := ${_DEP_TARGET_SPEC} 338.endif 339 340# host is special 341.if ${DEP_MACHINE:Mhost*} != "" 342DEP_TARGET_SPEC = ${DEP_MACHINE} 343.for v in ${TARGET_SPEC_VARS:O:u:NMACHINE} 344.undef DEP_$v 345.endfor 346.endif 347 348# reset each time through 349_build_all_dirs = 350_build_xtra_dirs = 351 352# DIRDEPS_CACHE can be very handy for debugging. 353# Also if repeatedly building the same target, 354# we can avoid the overhead of re-computing the tree dependencies. 355MK_DIRDEPS_CACHE ?= no 356BUILD_DIRDEPS_CACHE ?= no 357BUILD_DIRDEPS ?= yes 358 359.if ${MK_DIRDEPS_CACHE} == "yes" 360# this is where we will cache all our work 361DIRDEPS_CACHE ?= ${_OBJDIR:tA}/dirdeps.cache${_TARGETS:U${.TARGETS}:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.} 362.endif 363 364# sanity check: Makefile.depend.options should *not* include us 365.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}.options} != "" 366.error ${DEP_RELDIR}/${.MAKE.DEPENDFILE_PREFIX}.options: should include dirdeps-options.mk 367.endif 368 369# pickup customizations 370# as below you can use !target(_DIRDEP_USE) to protect things 371# which should only be done once. 372.-include <local.dirdeps.mk> 373 374.if !target(_DIRDEP_USE) 375# things we skip for host tools 376SKIP_HOSTDIR ?= 377 378NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}} 379 380# things we always skip 381# SKIP_DIRDEPS allows for adding entries on command line. 382SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS} 383SKIP_DIR.host += ${SKIP_HOSTDIR} 384 385DEP_SKIP_DIR = ${SKIP_DIR} \ 386 ${SKIP_DIR.${DEP_TARGET_SPEC}:U} \ 387 ${TARGET_SPEC_VARS:@v@${SKIP_DIR.${DEP_$v}:U}@} \ 388 ${SKIP_DIRDEPS.${DEP_TARGET_SPEC}:U} \ 389 ${TARGET_SPEC_VARS:@v@${SKIP_DIRDEPS.${DEP_$v}:U}@} 390 391 392NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}} 393 394.if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS) 395NO_DIRDEPS = 396.elif defined(WITHOUT_DIRDEPS_BELOW) 397NO_DIRDEPS_BELOW = 398.endif 399 400.if defined(NO_DIRDEPS) 401# confine ourselves to the original dir and below. 402DIRDEPS_FILTER += M${_DEP_RELDIR}* 403.elif defined(NO_DIRDEPS_BELOW) 404DIRDEPS_FILTER += M${_DEP_RELDIR} 405.endif 406 407# this is what we run below 408DIRDEP_MAKE ?= ${.MAKE} 409DIRDEP_DIR ?= ${.TARGET:R} 410 411# if you want us to report load averages during build 412# DIRDEP_USE_PRELUDE += ${DIRDEP_LOADAVG_REPORT}; 413 414DIRDEP_LOADAVG_CMD ?= ${UPTIME:Uuptime} | sed 's,.*\(load\),\1,' 415DIRDEP_LOADAVG_LAST = 0 416# yes the expression here is a bit complicated, 417# the trick is to only eval ${DIRDEP_LOADAVG_LAST::=${now_utc}} 418# when we want to report. 419# Note: expr(1) will exit 1 if the expression evaluates to 0 420# hence the || true 421DIRDEP_LOADAVG_REPORT = \ 422 test -z "${"${expr ${now_utc} - ${DIRDEP_LOADAVG_INTERVAL:U60} - ${DIRDEP_LOADAVG_LAST} || true:L:sh:N-*}":?yes${DIRDEP_LOADAVG_LAST::=${now_utc}}:}" || \ 423 echo "${TRACER}`${DIRDEP_LOADAVG_CMD}`" 424 425# we suppress SUBDIR when visiting the leaves 426# we assume sys.mk will set MACHINE_ARCH 427# you can add extras to DIRDEP_USE_ENV 428# if there is no makefile in the target directory, we skip it. 429_DIRDEP_USE: .USE .MAKE 430 @for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \ 431 test -s ${.TARGET:R}/$$m || continue; \ 432 echo "${TRACER}Checking ${.TARGET:S,^${SRCTOP}/,,} for ${.TARGET:E} ..."; \ 433 ${DIRDEP_USE_PRELUDE} \ 434 MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \ 435 TARGET_SPEC=${.TARGET:E} \ 436 MACHINE=${.TARGET:E} \ 437 ${DIRDEP_MAKE} -C ${DIRDEP_DIR} || exit 1; \ 438 break; \ 439 done 440 441.ifdef ALL_MACHINES 442.if empty(ONLY_TARGET_SPEC_LIST) && empty(ONLY_MACHINE_LIST) 443# we start with everything 444_machine_list != echo; 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}* 2> /dev/null 445 446# some things we know we want to ignore 447DIRDEPS_TARGETS_SKIP_LIST += \ 448 *~ \ 449 *.bak \ 450 *.inc \ 451 *.old \ 452 *.options \ 453 *.orig \ 454 *.rej \ 455 456# first trim things we know we want to skip 457# and provide canonical form 458_machine_list := ${_machine_list:${DIRDEPS_TARGETS_SKIP_LIST:${M_ListToSkip}}:T:E} 459 460# cater for local complexities 461# local.dirdeps.mk can set 462# DIRDEPS_ALL_MACHINES_FILTER and 463# DIRDEPS_ALL_MACHINES_FILTER_XTRAS for final tweaks 464 465.if !empty(ALL_TARGET_SPEC_LIST) 466.if ${_debug_reldir} 467.info ALL_TARGET_SPEC_LIST=${ALL_TARGET_SPEC_LIST} 468.endif 469DIRDEPS_ALL_MACHINES_FILTER += \ 470 @x@$${ALL_TARGET_SPEC_LIST:@s@$${x:M$$s}@}@ 471.elif !empty(ALL_MACHINE_LIST) 472.if ${_debug_reldir} 473.info ALL_MACHINE_LIST=${ALL_MACHINE_LIST} 474.endif 475.if ${TARGET_SPEC_VARS:[#]} > 1 476# the space below can result in extraneous ':' 477DIRDEPS_ALL_MACHINES_FILTER += \ 478 @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m,*} $${x:M$$m}@}@ 479.else 480DIRDEPS_ALL_MACHINES_FILTER += \ 481 @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m}@}@ 482.endif 483.endif 484# add local XTRAS - default to something benign 485DIRDEPS_ALL_MACHINES_FILTER += \ 486 ${DIRDEPS_ALL_MACHINES_FILTER_XTRAS:UNbak} 487 488.if ${_debug_reldir} 489.info _machine_list=${_machine_list} 490.info DIRDEPS_ALL_MACHINES_FILTER=${DIRDEPS_ALL_MACHINES_FILTER} 491.endif 492 493_only_machines := ${_machine_list:${DIRDEPS_ALL_MACHINES_FILTER:ts:}:S,:, ,g} 494.else 495_only_machines := ${ONLY_TARGET_SPEC_LIST:U} ${ONLY_MACHINE_LIST:U} 496.endif 497 498.if empty(_only_machines) 499# we must be boot-strapping 500_only_machines := ${TARGET_MACHINE:U${ALL_TARGET_SPEC_LIST:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}} 501.endif 502 503# cleanup the result 504_only_machines := ${_only_machines:O:u} 505 506.if ${_debug_reldir} 507.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: ALL_MACHINES _only_machines=${_only_machines} 508.endif 509 510.else # ! ALL_MACHINES 511# if ONLY_TARGET_SPEC_LIST or ONLY_MACHINE_LIST is set, we are limited to that. 512# Note that ONLY_TARGET_SPEC_LIST should be fully qualified. 513# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST 514# otherwise DEP_MACHINE is it - so DEP_MACHINE will match. 515_only_machines := ${ONLY_TARGET_SPEC_LIST:U:M${DEP_MACHINE},*} 516.if empty(_only_machines) 517_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}} 518.endif 519.endif 520 521.if !empty(NOT_MACHINE_LIST) 522_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}} 523.endif 524.if !empty(NOT_TARGET_SPEC_LIST) 525# we must first qualify 526_dm := ${DEP_MACHINE} 527_only_machines := ${_only_machines:M*,*} ${_only_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} 528DEP_MACHINE := ${_dm} 529_only_machines := ${_only_machines:${NOT_TARGET_SPEC_LIST:${M_ListToSkip}}} 530.endif 531# clean up 532_only_machines := ${_only_machines:O:u} 533 534.if ${_debug_reldir} 535.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _only_machines=${_only_machines} 536.endif 537 538# make sure we have a starting place? 539DIRDEPS ?= ${RELDIR} 540.endif # target 541 542.if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW) 543.if ${MK_DIRDEPS_CACHE} == "yes" 544 545# just ensure this exists 546build-dirdeps: 547 548M_oneperline = @x@\\${.newline} $$x@ 549 550.if ${BUILD_DIRDEPS_CACHE} == "no" 551.if !target(dirdeps-cached) 552# we do this via sub-make 553BUILD_DIRDEPS = no 554 555# ignore anything but these 556.MAKE.META.IGNORE_FILTER = M*/${.MAKE.DEPENDFILE_PREFIX}* 557 558dirdeps: dirdeps-cached 559dirdeps-cached: ${DIRDEPS_CACHE} .MAKE 560 @echo "${TRACER}Using ${DIRDEPS_CACHE}" 561 @MAKELEVEL=${.MAKE.LEVEL} \ 562 TARGET_SPEC=${TARGET_SPEC} \ 563 ${TARGET_SPEC_VARS:@v@$v=${$v}@} \ 564 ${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \ 565 dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no 566 567# leaf makefiles rarely work for building DIRDEPS_CACHE 568.if ${RELDIR} != "." 569BUILD_DIRDEPS_MAKEFILE ?= -f dirdeps.mk 570.endif 571 572# these should generally do 573BUILD_DIRDEPS_MAKEFILE ?= 574BUILD_DIRDEPS_TARGETS ?= ${.TARGETS} 575 576.if ${DIRDEPS_CACHE} != ${STATIC_DIRDEPS_CACHE:Uno} && ${DIRDEPS_CACHE:M${SRCTOP}/*} == "" 577# export this for dirdeps-cache-update.mk 578DYNAMIC_DIRDEPS_CACHE := ${DIRDEPS_CACHE} 579.export DYNAMIC_DIRDEPS_CACHE 580# we need the .meta file to ensure we update if 581# any of the Makefile.depend* changed. 582# We do not want to compare the command line though. 583${DIRDEPS_CACHE}: .META .NOMETA_CMP 584 +@{ echo '# Autogenerated - do NOT edit!'; echo; \ 585 echo 'BUILD_DIRDEPS=no'; echo; \ 586 echo '.include <dirdeps.mk>'; echo; \ 587 } > ${.TARGET}.new 588 +@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \ 589 DIRDEPS="${DIRDEPS}" \ 590 TARGET_SPEC=${TARGET_SPEC} \ 591 MAKEFLAGS= ${DIRDEP_CACHE_MAKE:U${.MAKE}} -C ${_CURDIR} \ 592 ${BUILD_DIRDEPS_MAKEFILE} \ 593 ${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \ 594 .MAKE.DEPENDFILE=.none \ 595 ${"${DEBUG_DIRDEPS:Nno}":?DEBUG_DIRDEPS='${DEBUG_DIRDEPS}':} \ 596 ${.MAKEFLAGS:tW:S,-D ,-D,g:tw:M*WITH*} \ 597 ${.MAKEFLAGS:tW:S,-d ,-d,g:tw:M-d*} \ 598 3>&1 1>&2 | sed 's,${SRCTOP},_{SRCTOP},g;s,_{SRCTOP}/_{SRCTOP},_{SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \ 599 mv ${.TARGET}.new ${.TARGET} 600 601.endif 602.endif 603.elif !target(_count_dirdeps) 604# we want to capture the dirdeps count in the cache 605.END: _count_dirdeps 606_count_dirdeps: .NOMETA 607 @{ echo; echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS}'; } >&3 608 609.endif 610.elif !make(dirdeps) && !target(_count_dirdeps) 611beforedirdeps: _count_dirdeps 612_count_dirdeps: .NOMETA 613 @echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS} seconds=`expr ${now_utc} - ${start_utc}`" 614 615.endif 616.endif 617 618.if ${BUILD_DIRDEPS} == "yes" 619 620# the rest is done repeatedly for every Makefile.depend we read. 621# if we are anything but the original dir we care only about the 622# machine type we were included for.. 623 624.if ${DEP_RELDIR} == "." 625_this_dir := ${SRCTOP} 626.else 627_this_dir := ${SRCTOP}/${DEP_RELDIR} 628.endif 629 630# on rare occasions, there can be a need for extra help 631_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc 632.-include <${_dep_hack}> 633.-include <${_dep_hack:R}.options> 634 635.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC} 636# this should be all 637_machines := ${DEP_MACHINE} 638.else 639# this is the machine list we actually use below 640_machines := ${_only_machines} 641 642.if defined(HOSTPROG) || ${DEP_MACHINE:Nhost*} == "" 643# we need to build this guy's dependencies for host as well. 644.if ${DEP_MACHINE:Nhost*} == "" 645_machines += ${DEP_MACHINE} 646.else 647_machines += host 648.endif 649.endif 650 651_machines := ${_machines:O:u} 652.endif 653 654.if ${TARGET_SPEC_VARS:[#]} > 1 655# we need to tweak _machines 656_dm := ${DEP_MACHINE} 657# apply the same filtering that we do when qualifying DIRDEPS. 658# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.' 659# Again we expect that any already qualified machines are fully qualified. 660_machines := ${_machines:M*,*} ${_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:S,^.,,} 661DEP_MACHINE := ${_dm} 662_machines := ${_machines:${M_dep_qual_fixes:ts:}:O:u} 663.endif 664 665# reset each time through 666_build_dirs = 667 668.if ${DEP_RELDIR} == ${_DEP_RELDIR} && ${_CURDIR} != ${SRCTOP} 669# pickup other machines for this dir if necessary 670_build_dirs += ${_machines:@m@${_CURDIR}.$m@} 671.endif 672 673.if ${_debug_reldir} 674.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: nDIRDEPS=${DIRDEPS:[#]} 675.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}' 676.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}' 677.endif 678 679.if !empty(DIRDEPS) 680# these we reset each time through as they can depend on DEP_MACHINE 681DEP_DIRDEPS_FILTER = \ 682 ${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \ 683 ${TARGET_SPEC_VARS:@v@${DIRDEPS_FILTER.${DEP_$v}:U}@} \ 684 ${DIRDEPS_FILTER:U} 685.if empty(DEP_DIRDEPS_FILTER) 686# something harmless 687DEP_DIRDEPS_FILTER = U 688.endif 689 690# this is what we start with 691__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@} 692 693# some entries may be qualified with .<machine> or .<target_spec> 694# we can tell the unqualified ones easily - because they exist 695__unqual_depdirs := ${__depdirs:@d@${exists($d):?$d:}@} 696__qual_depdirs := ${__depdirs:${__unqual_depdirs:Uno:${M_ListToSkip}}} 697 698.if ${DEP_RELDIR} == ${_DEP_RELDIR} 699# if it was called out - we likely need it. 700__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} \ 701 ${DPADD:U.:M${HOST_OBJTOP32:Uno}/*:S,${HOST_OBJTOP32:Uno}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host32,:N.*:@d@${SRCTOP}/$d@} 702__qual_depdirs += ${__hostdpadd} 703.endif 704 705.if ${_debug_reldir} 706.info DEP_DIRDEPS_FILTER=${DEP_DIRDEPS_FILTER:ts:} 707.info depdirs=${__depdirs:S,^${SRCTOP}/,,} 708.info qualified=${__qual_depdirs:S,^${SRCTOP}/,,} 709.info unqualified=${__unqual_depdirs:S,^${SRCTOP}/,,} 710.endif 711 712# _build_dirs is what we will feed to _DIRDEP_USE 713_build_dirs += \ 714 ${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \ 715 ${__qual_depdirs:N*.host} \ 716 ${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \ 717 ${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@} 718 719# qualify everything now 720_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u} 721 722.endif # empty DIRDEPS 723 724_build_all_dirs += ${_build_dirs} ${_build_xtra_dirs} 725_build_all_dirs := ${_build_all_dirs:O:u} 726 727# Normally if doing make -V something, 728# we do not want to waste time chasing DIRDEPS 729# but if we want to count the number of Makefile.depend* read, we do. 730.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS:U}} == "" 731.if !empty(_build_all_dirs) 732.if ${BUILD_DIRDEPS_CACHE} == "yes" 733# we use _cache_script to minimize the number of times we fork the shell 734_cache_script = echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}'; 735# guard against _new_dirdeps being too big for a single command line 736_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@:S,^${SRCTOP}/,,} 737_cache_xtra_deps := ${_build_xtra_dirs:S,^${SRCTOP}/,,} 738.export _cache_xtra_deps _new_dirdeps 739.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS) 740# Discouraged, but there are always exceptions. 741# Handle it here rather than explain how. 742DIRDEPS_EXPORT_VARS ?= ${DEP_EXPORT_VARS} 743_cache_xvars := echo; ${DIRDEPS_EXPORT_VARS:@v@echo '$v = ${$v}';@} echo '.export ${DIRDEPS_EXPORT_VARS}'; echo; 744_cache_script += ${_cache_xvars} 745.endif 746.else 747# this makes it all happen 748dirdeps: ${_build_all_dirs} 749.endif 750${_build_all_dirs}: _DIRDEP_USE 751 752.if ${_debug_reldir} 753.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs:S,^${SRCTOP}/,,} 754.endif 755 756.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS) 757.export ${DIRDEPS_EXPORT_VARS} ${DEP_EXPORT_VARS} 758DIRDEPS_EXPORT_VARS = 759DEP_EXPORT_VARS = 760.endif 761 762# this builds the dependency graph 763.for m in ${_machines} 764.if ${BUILD_DIRDEPS_CACHE} == "yes" && !empty(_build_dirs) 765_cache_deps = 766_cache_script += echo; echo 'DIRDEPS.${_this_dir}.$m = \'; 767.endif 768# it would be nice to do :N${.TARGET} 769.if !empty(__qual_depdirs) 770.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m} 771.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != "" 772.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} 773.endif 774.if ${BUILD_DIRDEPS_CACHE} == "yes" 775_cache_deps += ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} 776.else 777${_this_dir}.$m: ${_build_dirs:M*.$q} 778.endif 779.endfor 780.endif 781.if ${_debug_reldir} 782.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} 783.endif 784.if ${BUILD_DIRDEPS_CACHE} == "yes" 785.if !empty(_build_dirs) 786_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} 787.if !empty(_cache_deps) 788.export _cache_deps 789_cache_script += for x in $$_cache_deps; do echo " _{SRCTOP}/$$x \\"; done; 790.endif 791# anything in _{build,env}_xtra_dirs is hooked to dirdeps: only 792x!= echo; { echo; ${_cache_script} echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \ 793 echo; echo 'dirdeps: ${_this_dir}.$m \'; \ 794 for x in $$_cache_xtra_deps; do echo " _{SRCTOP}/$$x \\"; done; \ 795 echo; for x in $$_new_dirdeps; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3 796.endif 797.else 798${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} 799.endif 800.endfor 801 802.endif 803 804# Now find more dependencies - and recurse. 805.for d in ${_build_all_dirs} 806.if !target(_dirdeps_checked.$d) 807# once only 808_dirdeps_checked.$d: 809_dr := ${d:S,^${SRCTOP}/,,} 810.if ${_debug_search} 811.info checking ${_dr} 812.endif 813# Note: _build_all_dirs is fully qualifed so d:R is always the directory 814.if exists(${d:R}) 815# we pass _DEP_TARGET_SPEC to tell the next step what we want 816_DEP_TARGET_SPEC := ${d:E} 817# some makefiles may still look at this 818_DEP_MACHINE := ${d:E:C/,.*//} 819# set these too in case Makefile.depend* uses them 820.if ${TARGET_SPEC_VARS:[#]} > 1 821_dtspec := ${_DEP_TARGET_SPEC:S/,/ /g} 822.for i in ${_tspec_x} 823DEP_${TARGET_SPEC_VARS:[$i]} := ${_dtspec:[$i]} 824.endfor 825.else 826DEP_MACHINE := ${_DEP_MACHINE} 827.endif 828# Warning: there is an assumption here that MACHINE is always 829# the first entry in TARGET_SPEC_VARS. 830# If TARGET_SPEC and MACHINE are insufficient, you have a problem. 831_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:C;${MACHINE}((,.+)?)$;${d:E:C/,.*//}\1;:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]} 832.if !empty(_m) 833# M_dep_qual_fixes isn't geared to Makefile.depend 834_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}} 835.if ${_debug_search} 836.info Looking for ${_qm} 837.endif 838# set this "just in case" 839# we can skip :tA since we computed the path above 840DEP_RELDIR := ${_m:H:S,^${SRCTOP}/,,} 841# and reset this 842DIRDEPS = 843.if ${_debug_reldir} && ${_qm} != ${_m} 844.info loading ${_m:S,${SRCTOP}/,,} for ${_dr} 845.endif 846.include <${_m}> 847.else 848# set these as if we found Makefile.depend* 849DEP_RELDIR := ${_dr:R} 850DIRDEPS = 851.if ${_debug_reldir} 852.info loading local.dirdeps-missing.mk for ${_dr} 853.endif 854.-include <local.dirdeps-missing.mk> 855.endif 856.endif 857.endif 858.endfor 859 860.endif # -V 861.endif # BUILD_DIRDEPS 862 863.elif ${.MAKE.LEVEL} > 42 864.error You should have stopped recursing by now. 865.else 866# we are building something 867DEP_RELDIR := ${RELDIR} 868_DEP_RELDIR := ${RELDIR} 869# Since we are/should be included by .MAKE.DEPENDFILE 870# This is a final opportunity to add/hook global rules. 871.-include <local.dirdeps-build.mk> 872 873# skip _reldir_{finish,failed} if not included from Makefile.depend* 874# or not in meta mode 875.if !defined(WITHOUT_META_STATS) && ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" && ${.MAKE.MODE:Mmeta} != "" 876 877meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \ 878 created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}} 879 880.if !target(_reldir_finish) 881.END: _reldir_finish 882_reldir_finish: .NOMETA 883 @echo "${TRACER}Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" 884.endif 885 886.if !target(_reldir_failed) 887.ERROR: _reldir_failed 888_reldir_failed: .NOMETA 889 @echo "${TRACER}Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" 890.endif 891 892.endif 893 894# pickup local dependencies 895.if ${MAKE_VERSION} < 20160220 896.-include <.depend> 897.else 898.dinclude <.depend> 899.endif 900.endif 901 902# bootstrapping new dependencies made easy? 903.if !target(bootstrap-empty) 904.if !target(bootstrap) && (make(bootstrap) || \ 905 make(bootstrap-this) || \ 906 make(bootstrap-recurse) || \ 907 make(bootstrap-empty)) 908 909# if we are bootstrapping create the default 910_want = ${.CURDIR}/${.MAKE.DEPENDFILE_DEFAULT:T} 911 912.if exists(${_want}) 913# stop here 914${.TARGETS:Mboot*}: 915.elif !make(bootstrap-empty) 916# find a Makefile.depend to use as _src 917_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo 918.if empty(_src) 919.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty 920.endif 921 922_src?= ${.MAKE.DEPENDFILE} 923 924.MAKE.DEPENDFILE_BOOTSTRAP_SED+= -e 's/${_src:E:C/,.*//}/${MACHINE}/g' 925 926# just create Makefile.depend* for this dir 927bootstrap-this: .NOTMAIN 928 @echo Bootstrapping ${RELDIR}/${_want:T} from ${_src:T}; \ 929 echo You need to build ${RELDIR} to correctly populate it. 930.if ${_src:T} != ${.MAKE.DEPENDFILE_PREFIX:T} 931 (cd ${.CURDIR} && sed ${.MAKE.DEPENDFILE_BOOTSTRAP_SED} ${_src} > ${_want:T}) 932.else 933 cp ${.CURDIR}/${_src:T} ${_want} 934.endif 935 936# create Makefile.depend* for this dir and its dependencies 937bootstrap: bootstrap-recurse 938bootstrap-recurse: bootstrap-this 939 940_mf := ${.PARSEFILE} 941bootstrap-recurse: .NOTMAIN .MAKE 942 @cd ${SRCTOP} && \ 943 for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \ 944 test -d $$d || d=$${d%.*}; \ 945 test -d $$d || continue; \ 946 echo "Checking $$d for bootstrap ..."; \ 947 (cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \ 948 done 949 950.endif 951 952# create an empty Makefile.depend* to get the ball rolling. 953bootstrap-empty: .NOTMAIN .NOMETA 954 @echo Creating empty ${RELDIR}/${_want:T}; \ 955 echo You need to build ${RELDIR} to correctly populate it. 956 @{ echo DIRDEPS=; echo ".include <dirdeps.mk>"; } > ${_want} 957 958.endif 959.endif 960