xref: /freebsd/contrib/bmake/mk/dirdeps.mk (revision 6a7405f5a6b639682cacf01e35d561411ff556aa)
1# $Id: dirdeps.mk,v 1.175 2025/01/05 01:16:19 sjg Exp $
2
3# SPDX-License-Identifier: BSD-2-Clause
4#
5# Copyright (c) 2010-2023, Simon J. Gerraty
6# Copyright (c) 2010-2018, Juniper Networks, Inc.
7# All rights reserved.
8#
9# Redistribution and use in source and binary forms, with or without
10# modification, are permitted provided that the following conditions
11# are met:
12# 1. Redistributions of source code must retain the above copyright
13#    notice, this list of conditions and the following disclaimer.
14# 2. Redistributions in binary form must reproduce the above copyright
15#    notice, this list of conditions and the following disclaimer in the
16#    documentation and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
21# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
22# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
23# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
24# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
28# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29
30# Much of the complexity here is for supporting cross-building.
31# If a tree does not support that, simply using plain Makefile.depend
32# should provide sufficient clue.
33# Otherwise the recommendation is to use Makefile.depend.${MACHINE}
34# as expected below.
35
36# Note: this file gets multiply included.
37# This is what we do with DIRDEPS
38
39# DIRDEPS:
40#	This is a list of directories - relative to SRCTOP, it is
41#	normally only of interest to .MAKE.LEVEL 0.
42#	In some cases the entry may be qualified with a .<machine>
43#	or .<target_spec> suffix (see TARGET_SPEC_VARS below),
44#	for example to force building something for the pseudo
45#	machines "host" or "common" regardless of current ${MACHINE}.
46#
47#	All unqualified entries end up being qualified with .${TARGET_SPEC}
48#	and partially qualified (if TARGET_SPEC_VARS has multiple
49#	entries) are also expanded to a full .<target_spec>.
50#	The  _DIRDEP_USE target uses the suffix to set TARGET_SPEC
51#	correctly when visiting each entry.
52#
53#	The fully qualified directory entries are used to construct a
54#	dependency graph that will drive the build later.
55#
56#	Also, for each fully qualified directory target, we will search
57#	using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional
58#	dependencies.  We use Makefile.depend (default value for
59#	.MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to
60#	distinguish them from others.
61#
62#	Before each Makefile.depend file is read, we set
63#	DEP_RELDIR to be the RELDIR (path relative to SRCTOP) for
64#	its directory, and DEP_MACHINE etc according to the .<target_spec>
65#	represented by the suffix of the corresponding target.
66#
67#	Since each Makefile.depend file includes dirdeps.mk, this
68#	processing is recursive and results in .MAKE.LEVEL 0 learning the
69#	dependencies of the tree wrt the initial directory (_DEP_RELDIR).
70#
71#	NOTE: given the extent of processing that DIRDEPS undergoes it
72#	is important that any variables in entries use :U to guard
73#	against surprises when undefined.
74#
75# TARGET_SPEC_VARS
76#	The default value is just MACHINE, and for most environments
77#	this is sufficient.  The _DIRDEP_USE target actually sets
78#	both MACHINE and TARGET_SPEC to the suffix of the current
79#	target so that in the general case TARGET_SPEC can be ignored.
80#
81#	If more than MACHINE is needed then sys.mk needs to decompose
82#	TARGET_SPEC and set the relevant variables accordingly.
83#	It is important that MACHINE be included in and actually be
84#	the first member of TARGET_SPEC_VARS.  This allows other
85#	variables to be considered optional, and some of the treatment
86#	below relies on MACHINE being the first entry.
87#	Note: TARGET_SPEC cannot contain any '.'s so the target
88#	triple used by compiler folk won't work (directly anyway).
89#
90#	For example:
91#
92#		# Always list MACHINE first,
93#		# other variables might be optional.
94#		TARGET_SPEC_VARS = MACHINE TARGET_OS
95#		.if ${TARGET_SPEC:Uno:M*,*} != ""
96#		_tspec := ${TARGET_SPEC:S/,/ /g}
97#		MACHINE := ${_tspec:[1]}
98#		TARGET_OS := ${_tspec:[2]}
99#		# etc.
100#		# We need to stop that TARGET_SPEC affecting any submakes
101#		# and deal with MACHINE=${TARGET_SPEC} in the environment.
102#		TARGET_SPEC =
103#		# export but do not track
104#		.export-env TARGET_SPEC
105#		.export ${TARGET_SPEC_VARS}
106#		.for v in ${TARGET_SPEC_VARS:O:u}
107#		.if empty($v)
108#		.undef $v
109#		.endif
110#		.endfor
111#		.endif
112#		# make sure we know what TARGET_SPEC is
113#		# as we may need it to find Makefile.depend*
114#		TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
115#
116#	The following variables can influence the initial DIRDEPS
117#	computation with regard to the TARGET_SPECs that will be
118#	built.
119#	Most should also be considered by init.mk
120#
121#	ONLY_TARGET_SPEC_LIST
122#		Defines a list of TARGET_SPECs for which the current
123#		directory can be built.
124#		If ALL_MACHINES is defined, we build for all the
125#		TARGET_SPECs listed.
126#
127#	ONLY_MACHINE_LIST
128#		As for ONLY_TARGET_SPEC_LIST but only specifies
129#		MACHINEs.
130#
131#	NOT_TARGET_SPEC_LIST
132#		A list of TARGET_SPECs for which the current
133#		directory should not be built.
134#
135#	NOT_MACHINE_LIST
136#		A list of MACHINEs the current directory should not be
137#		built for.
138#
139# DIRDEPS_EXPORT_VARS (DEP_EXPORT_VARS)
140#	It is discouraged, but sometimes necessary for a
141#	Makefile.depend file to influence the environment.
142#	Doing this correctly (especially if using DIRDEPS_CACHE) is
143#	tricky so a Makefile.depend file can set DIRDEPS_EXPORT_VARS
144#	and dirdeps.mk will do the deed:
145#
146#		MK_UEFI = yes
147#		DIRDEPS_EXPORT_VARS = MK_UEFI
148#
149# _build_xtra_dirs
150#	local.dirdeps.mk can add targets to this variable.
151#	They will be hooked into the build, but independent of
152#	any other DIRDEP.
153#
154#	This allows for adding TESTS to the build, such that the build
155#	will fail if any test fails, but without the risk of introducing
156#	circular dependencies.
157
158now_utc ?= ${%s:L:localtime}
159.if !defined(start_utc)
160start_utc := ${now_utc}
161.endif
162
163.if !target(bootstrap) && (make(bootstrap) || \
164	make(bootstrap-this) || \
165	make(bootstrap-recurse) || \
166	make(bootstrap-empty))
167# disable most of below
168.MAKE.LEVEL = 1
169.endif
170
171# touch this at your peril
172_DIRDEP_USE_LEVEL?= 0
173.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL}
174# only the first instance is interested in all this
175
176# the first time we are included the _DIRDEP_USE target will not be defined
177# we can use this as a clue to do initialization and other one time things.
178.if !target(_DIRDEP_USE)
179
180# do some setup we only need once
181_CURDIR ?= ${.CURDIR}
182_OBJDIR ?= ${.OBJDIR}
183
184.if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*[/.]*} != ""
185# This little trick let's us do
186#
187# mk -f dirdeps.mk some/dir.${TARGET_SPEC}
188#
189all:
190${.TARGETS:Nall}: all
191DIRDEPS := ${.TARGETS:M*[/.]*}
192# so that -DNO_DIRDEPS works
193DEP_RELDIR := ${DIRDEPS:[1]:R}
194# this will become DEP_MACHINE below
195TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//}
196.if ${TARGET_MACHINE:N*/*} == ""
197TARGET_MACHINE := ${MACHINE}
198.endif
199# disable DIRDEPS_CACHE as it does not like this trick
200MK_DIRDEPS_CACHE = no
201# incase anyone needs to know
202_dirdeps_cmdline:
203.endif
204
205# make sure we get the behavior we expect
206.MAKE.SAVE_DOLLARS = no
207
208# make sure these are empty to start with
209_DEP_TARGET_SPEC =
210
211# If TARGET_SPEC_VARS is other than just MACHINE
212# it should be set by sys.mk or similar by now.
213# TARGET_SPEC must not contain any '.'s.
214TARGET_SPEC_VARS ?= MACHINE
215# we allow for this to be a subset
216TARGET_SPEC_VARS.host ?= MACHINE
217TARGET_SPEC_VARS.host32 = ${TARGET_SPEC_VARS.host}
218# this is what we started with
219TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
220# this is what we mostly use below
221DEP_TARGET_SPEC_VARS = ${TARGET_SPEC_VARS.${DEP_MACHINE}:U${TARGET_SPEC_VARS}}
222DEP_TARGET_SPEC = ${DEP_TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,}
223# make sure we have defaults
224.for v in ${DEP_TARGET_SPEC_VARS}
225DEP_$v ?= ${$v}
226.endfor
227
228.if ${TARGET_SPEC_VARS:[#]} > 1
229# Ok, this gets more complex (putting it mildly).
230# In order to stay sane, we need to ensure that all the build_dirs
231# we compute below are fully qualified wrt DEP_TARGET_SPEC.
232# The makefiles may only partially specify (eg. MACHINE only),
233# so we need to construct a set of modifiers to fill in the gaps.
234_tspec_x := ${TARGET_SPEC_VARS:${M_RANGE:Urange}}
235# this handles unqualified entries
236M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC};
237# there needs to be at least one item missing for these to make sense
238.for i in ${_tspec_x:[2..-1]}
239_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,}
240_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,}
241M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i};
242.endfor
243TARGET_SPEC_VARSr := ${TARGET_SPEC_VARS:[-1..1]}
244.if ${TARGET_SPEC_VARS.host} == ${TARGET_SPEC_VARS}
245M_dep_qual_fixes.host = ${M_dep_qual_fixes}
246.elif ${TARGET_SPEC_VARS.host:[#]} > 1
247_htspec_x := ${TARGET_SPEC_VARS.host:${M_RANGE:Urange}}
248# this handles unqualified entries
249M_dep_qual_fixes.host = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC};
250# there needs to be at least one item missing for these to make sense
251.for i in ${_htspec_x:[2..-1]}
252_htspec_m$i := ${TARGET_SPEC_VARS.host:[2..$i]:@w@[^,]+@:ts,}
253_htspec_a$i := ,${TARGET_SPEC_VARS.host:[$i..-1]:@v@$$$${DEP_$v}@:ts,}
254M_dep_qual_fixes.host += C;(\.${_htspec_m$i})$$;\1${_htspec_a$i};
255.endfor
256.else
257M_dep_qual_fixes.host = U
258.endif
259.else
260# A harmless? default.
261M_dep_qual_fixes = U
262.endif
263M_dep_qual_fixes.host ?= ${M_dep_qual_fixes}
264M_dep_qual_fixes.host32 = ${M_dep_qual_fixes.host}
265
266.if !defined(.MAKE.DEPENDFILE_PREFERENCE)
267# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater?
268# you really want this set by sys.mk or similar
269.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T}
270.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}"
271.if ${TARGET_SPEC} != ${MACHINE}
272.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE}
273.endif
274.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}
275.endif
276.endif
277
278_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T}
279_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*}
280
281# for machine specific dependfiles we require ${MACHINE} to be at the end
282# also for the sake of sanity we require a common prefix
283.if !defined(.MAKE.DEPENDFILE_PREFIX)
284# knowing .MAKE.DEPENDFILE_PREFIX helps
285.if !empty(_machine_dependfiles)
286.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R}
287.else
288.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T}
289.endif
290.endif
291
292# turn a list into a set of :N modifiers
293# NskipFoo = ${Foo:${M_ListToSkip}}
294M_ListToSkip ?= O:u:S,^,N,:ts:
295
296# this is how we identify non-machine specific dependfiles
297N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}}
298
299# this gets reset for each dirdep we check
300DEP_RELDIR ?= ${RELDIR}
301
302# remember the initial value of DEP_RELDIR - we test for it below.
303_DEP_RELDIR := ${DEP_RELDIR}
304
305# this can cause lots of output!
306# set to a set of glob expressions that might match RELDIR
307DEBUG_DIRDEPS ?= no
308
309# make sure this target exists
310dirdeps: beforedirdeps .WAIT
311beforedirdeps:
312
313.endif				# !target(_DIRDEP_USE)
314
315.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != ""
316_debug_reldir = 1
317.else
318_debug_reldir = 0
319.endif
320.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend depend:L:M$x}@} != ""
321_debug_search = 1
322.else
323_debug_search = 0
324.endif
325
326# First off, we want to know what ${MACHINE} to build for.
327# This can be complicated if we are using a mixture of ${MACHINE} specific
328# and non-specific Makefile.depend*
329
330# if we were included recursively _DEP_TARGET_SPEC should be valid.
331.if empty(_DEP_TARGET_SPEC)
332DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}}
333_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC}
334.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != ""
335# record that we've read dependfile for this
336_dirdeps_checked.${_CURDIR}.${TARGET_SPEC}:
337.endif
338.endif
339
340# by now _DEP_TARGET_SPEC should be set, parse it.
341.if ${TARGET_SPEC_VARS:[#]} > 1
342# we need to parse DEP_MACHINE may or may not contain more info
343_tspec := ${_DEP_TARGET_SPEC:S/,/ /g}
344.for i in ${_tspec_x}
345DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]}
346.endfor
347.for v in ${DEP_TARGET_SPEC_VARS:O:u}
348.if empty(DEP_$v)
349.undef DEP_$v
350.endif
351.endfor
352.else
353DEP_MACHINE := ${_DEP_TARGET_SPEC}
354.endif
355
356# reset each time through
357_build_all_dirs =
358_build_xtra_dirs =
359
360# DIRDEPS_CACHE can be very handy for debugging.
361# Also if repeatedly building the same target,
362# we can avoid the overhead of re-computing the tree dependencies.
363MK_DIRDEPS_CACHE ?= no
364BUILD_DIRDEPS_CACHE ?= no
365BUILD_DIRDEPS ?= yes
366
367.if ${MK_DIRDEPS_CACHE} == "yes"
368# this is where we will cache all our work
369DIRDEPS_CACHE ?= ${_OBJDIR:tA}/dirdeps.cache${_TARGETS:U${.TARGETS}:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.}
370.endif
371
372# sanity check: Makefile.depend.options should *not* include us
373.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}.options} != ""
374.error ${DEP_RELDIR}/${.MAKE.DEPENDFILE_PREFIX}.options: should include dirdeps-options.mk
375.endif
376
377# pickup customizations
378# as below you can use !target(_DIRDEP_USE) to protect things
379# which should only be done once.
380.-include <local.dirdeps.mk>
381
382.if !target(_DIRDEP_USE)
383# things we skip for host tools
384SKIP_HOSTDIR ?=
385
386NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}}
387
388# things we always skip
389# SKIP_DIRDEPS allows for adding entries on command line.
390SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS}
391SKIP_DIR.host += ${SKIP_HOSTDIR}
392
393DEP_SKIP_DIR = ${SKIP_DIR} \
394	${SKIP_DIR.${DEP_TARGET_SPEC}:U} \
395	${TARGET_SPEC_VARS:@v@${SKIP_DIR.${DEP_$v}:U}@} \
396	${SKIP_DIRDEPS.${DEP_TARGET_SPEC}:U} \
397	${TARGET_SPEC_VARS:@v@${SKIP_DIRDEPS.${DEP_$v}:U}@}
398
399
400NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}}
401
402.if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS)
403NO_DIRDEPS =
404.elif defined(WITHOUT_DIRDEPS_BELOW)
405NO_DIRDEPS_BELOW =
406.endif
407
408.if defined(NO_DIRDEPS)
409# confine ourselves to the original dir and below.
410DIRDEPS_FILTER += M${_DEP_RELDIR}*
411.elif defined(NO_DIRDEPS_BELOW)
412DIRDEPS_FILTER += M${_DEP_RELDIR}
413.endif
414
415# this is what we run below
416DIRDEP_MAKE ?= ${.MAKE}
417DIRDEP_DIR ?= ${.TARGET:R}
418# we normally want the default target
419DIRDEP_TARGETS ?=
420
421# if you want us to report load averages during build
422# DIRDEP_USE_PRELUDE += ${DIRDEP_LOADAVG_REPORT};
423
424DIRDEP_LOADAVG_CMD ?= ${UPTIME:Uuptime} | sed 's,.*\(load\),\1,'
425DIRDEP_LOADAVG_LAST = 0
426# yes the expression here is a bit complicated,
427# the trick is to only eval ${DIRDEP_LOADAVG_LAST::=${now_utc}}
428# when we want to report.
429# Note: expr(1) will exit 1 if the expression evaluates to 0
430# hence the  || true
431DIRDEP_LOADAVG_REPORT = \
432	test -z "${"${expr ${now_utc} - ${DIRDEP_LOADAVG_INTERVAL:U60} - ${DIRDEP_LOADAVG_LAST} || true:L:sh:N-*}":?yes${DIRDEP_LOADAVG_LAST::=${now_utc}}:}" || \
433	echo "${TRACER}`${DIRDEP_LOADAVG_CMD}`"
434
435# we suppress SUBDIR when visiting the leaves
436# we assume sys.mk will set MACHINE_ARCH
437# you can add extras to DIRDEP_USE_ENV
438# if there is no makefile in the target directory, we skip it.
439_DIRDEP_USE:	.USE .MAKE
440	@for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \
441		test -s ${.TARGET:R}/$$m || continue; \
442		echo "${TRACER}Checking ${.TARGET:S,^${SRCTOP}/,,} for ${.TARGET:E} ..."; \
443		${DIRDEP_USE_PRELUDE} \
444		MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \
445		TARGET_SPEC=${.TARGET:E} \
446		MACHINE=${.TARGET:E} \
447		${DIRDEP_MAKE} -C ${DIRDEP_DIR} ${DIRDEP_TARGETS} || exit 1; \
448		${DIRDEP_USE_EPILOGUE} \
449		break; \
450	done
451
452.ifdef ALL_MACHINES
453.if empty(ONLY_TARGET_SPEC_LIST) && empty(ONLY_MACHINE_LIST)
454# we start with everything
455_machine_list != echo; 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}* 2> /dev/null
456
457# some things we know we want to ignore
458DIRDEPS_TARGETS_SKIP_LIST += \
459	*~ \
460	*.bak \
461	*.inc \
462	*.old \
463	*.options \
464	*.orig \
465	*.rej \
466
467# first trim things we know we want to skip
468# and provide canonical form
469_machine_list := ${_machine_list:${DIRDEPS_TARGETS_SKIP_LIST:${M_ListToSkip}}:T:E}
470
471# cater for local complexities
472# local.dirdeps.mk can set
473# DIRDEPS_ALL_MACHINES_FILTER and
474# DIRDEPS_ALL_MACHINES_FILTER_XTRAS for final tweaks
475
476.if !empty(ALL_TARGET_SPEC_LIST)
477.if ${_debug_reldir}
478.info ALL_TARGET_SPEC_LIST=${ALL_TARGET_SPEC_LIST}
479.endif
480DIRDEPS_ALL_MACHINES_FILTER += \
481	@x@$${ALL_TARGET_SPEC_LIST:@s@$${x:M$$s}@}@
482.elif !empty(ALL_MACHINE_LIST)
483.if ${_debug_reldir}
484.info ALL_MACHINE_LIST=${ALL_MACHINE_LIST}
485.endif
486.if ${TARGET_SPEC_VARS:[#]} > 1
487# the space below can result in extraneous ':'
488DIRDEPS_ALL_MACHINES_FILTER += \
489	@x@$${ALL_MACHINE_LIST:@m@$${x:M$$m,*} $${x:M$$m}@}@
490.else
491DIRDEPS_ALL_MACHINES_FILTER += \
492	@x@$${ALL_MACHINE_LIST:@m@$${x:M$$m}@}@
493.endif
494.endif
495# add local XTRAS - default to something benign
496DIRDEPS_ALL_MACHINES_FILTER += \
497	${DIRDEPS_ALL_MACHINES_FILTER_XTRAS:UNbak}
498
499.if ${_debug_reldir}
500.info _machine_list=${_machine_list}
501.info DIRDEPS_ALL_MACHINES_FILTER=${DIRDEPS_ALL_MACHINES_FILTER}
502.endif
503
504_only_machines := ${_machine_list:${DIRDEPS_ALL_MACHINES_FILTER:ts:}:S,:, ,g}
505.else
506_only_machines := ${ONLY_TARGET_SPEC_LIST:U} ${ONLY_MACHINE_LIST:U}
507.endif
508
509.if empty(_only_machines)
510# we must be boot-strapping
511_only_machines := ${TARGET_MACHINE:U${ALL_TARGET_SPEC_LIST:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}}
512.endif
513
514# cleanup the result
515_only_machines := ${_only_machines:O:u}
516
517.if ${_debug_reldir}
518.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: ALL_MACHINES _only_machines=${_only_machines}
519.endif
520
521.else				# ! ALL_MACHINES
522# if ONLY_TARGET_SPEC_LIST or ONLY_MACHINE_LIST is set, we are limited to that.
523# Note that ONLY_TARGET_SPEC_LIST should be fully qualified.
524# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST
525# otherwise DEP_MACHINE is it - so DEP_MACHINE will match.
526_only_machines := ${ONLY_TARGET_SPEC_LIST:U:M${DEP_MACHINE},*}
527.if empty(_only_machines)
528_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}}
529.endif
530.endif
531
532.if !empty(NOT_MACHINE_LIST)
533_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}}
534.endif
535.if !empty(NOT_TARGET_SPEC_LIST)
536# we must first qualify
537_dm := ${DEP_MACHINE}
538_only_machines := ${_only_machines:M*,*} ${_only_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,}
539DEP_MACHINE := ${_dm}
540_only_machines := ${_only_machines:${NOT_TARGET_SPEC_LIST:${M_ListToSkip}}}
541.endif
542# clean up
543_only_machines := ${_only_machines:O:u}
544
545.if ${_debug_reldir}
546.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _only_machines=${_only_machines}
547.endif
548
549# make sure we have a starting place?
550DIRDEPS ?= ${RELDIR}
551.endif				# target
552
553.if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW)
554.if ${MK_DIRDEPS_CACHE} == "yes"
555
556# just ensure this exists
557build-dirdeps:
558
559M_oneperline = @x@\\${.newline}	$$x@
560
561.if ${BUILD_DIRDEPS_CACHE} == "no"
562.if !target(dirdeps-cached)
563# we do this via sub-make
564BUILD_DIRDEPS = no
565
566# ignore anything but these
567.MAKE.META.IGNORE_FILTER = M*/${.MAKE.DEPENDFILE_PREFIX}*
568
569dirdeps: dirdeps-cached
570dirdeps-cached:	${DIRDEPS_CACHE} .MAKE
571	@echo "${TRACER}Using ${DIRDEPS_CACHE}"
572	@${DIRDEPS_CACHED_ENV} MAKELEVEL=${.MAKE.LEVEL} \
573	TARGET_SPEC=${TARGET_SPEC} \
574	${TARGET_SPEC_VARS:@v@$v=${$v}@} \
575	${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \
576		dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no
577
578# leaf makefiles rarely work for building DIRDEPS_CACHE
579.if ${RELDIR} != "."
580BUILD_DIRDEPS_MAKEFILE ?= -f dirdeps.mk
581.endif
582
583# these should generally do
584BUILD_DIRDEPS_MAKEFILE ?=
585BUILD_DIRDEPS_OVERRIDES ?=
586BUILD_DIRDEPS_TARGETS ?= ${.TARGETS}
587
588.if ${DIRDEPS_CACHE} != ${STATIC_DIRDEPS_CACHE:Uno} && ${DIRDEPS_CACHE:M${SRCTOP}/*} == ""
589# export this for dirdeps-cache-update.mk
590DYNAMIC_DIRDEPS_CACHE := ${DIRDEPS_CACHE}
591.export DYNAMIC_DIRDEPS_CACHE
592# we need the .meta file to ensure we update if
593# any of the Makefile.depend* changed.
594# We do not want to compare the command line though.
595${DIRDEPS_CACHE}:	.META .NOMETA_CMP
596	+@{ echo '# Autogenerated - do NOT edit!'; echo; \
597	echo 'BUILD_DIRDEPS=no'; echo; \
598	echo '.include <dirdeps.mk>'; echo; \
599	} > ${.TARGET}.new
600	+@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \
601	DIRDEPS="${DIRDEPS}" \
602	TARGET_SPEC=${TARGET_SPEC} \
603	MAKEFLAGS= ${DIRDEP_CACHE_MAKE:U${.MAKE}} -C ${_CURDIR} \
604	${BUILD_DIRDEPS_MAKEFILE} \
605	${BUILD_DIRDEPS_TARGETS} \
606	${BUILD_DIRDEPS_OVERRIDES} \
607	BUILD_DIRDEPS_CACHE=yes \
608	.MAKE.DEPENDFILE=.none \
609	${"${DEBUG_DIRDEPS:Nno}":?DEBUG_DIRDEPS='${DEBUG_DIRDEPS}':} \
610	${.MAKEFLAGS:S,-D ,-D,gW:M*WITH*} \
611	${.MAKEFLAGS:S,-d ,-d,gW:M-d*} \
612	3>&1 1>&2 | sed 's,${SRCTOP},_{SRCTOP},g;s,_{SRCTOP}/_{SRCTOP},_{SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \
613	{ ${BUILD_DIRDEPS_EPILOGUE} mv ${.TARGET}.new ${.TARGET}; }
614
615.endif
616.endif
617.elif !target(_count_dirdeps)
618# we want to capture the dirdeps count in the cache
619.END: _count_dirdeps
620_count_dirdeps: .NOMETA
621	@{ echo; echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS}'; } >&3
622
623.endif
624.elif !make(dirdeps) && !target(_count_dirdeps)
625beforedirdeps: _count_dirdeps
626_count_dirdeps: .NOMETA
627	@echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS} seconds=`expr ${now_utc} - ${start_utc}`"
628
629.endif
630.endif
631
632.if ${BUILD_DIRDEPS} == "yes"
633
634# the rest is done repeatedly for every Makefile.depend we read.
635# if we are anything but the original dir we care only about the
636# machine type we were included for..
637
638.if ${DEP_RELDIR} == "."
639_this_dir := ${SRCTOP}
640.else
641_this_dir := ${SRCTOP}/${DEP_RELDIR}
642.endif
643
644# on rare occasions, there can be a need for extra help
645_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc
646.-include <${_dep_hack}>
647.-include <${_dep_hack:R}.options>
648
649.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC}
650# this should be all
651_machines := ${DEP_MACHINE}
652.else
653# this is the machine list we actually use below
654_machines := ${_only_machines}
655
656.if defined(HOSTPROG) || ${DEP_MACHINE:Nhost*} == ""
657# we need to build this guy's dependencies for host as well.
658.if ${DEP_MACHINE:Nhost*} == ""
659_machines += ${DEP_MACHINE}
660.else
661_machines += host
662.endif
663.endif
664
665_machines := ${_machines:O:u}
666.endif
667
668.if ${DEP_TARGET_SPEC_VARS:[#]} > 1
669# we need to tweak _machines
670_dm := ${DEP_MACHINE}
671# apply the same filtering that we do when qualifying DIRDEPS.
672# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.'
673# Again we expect that any already qualified machines are fully qualified.
674_machines := ${_machines:M*,*} ${_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:S,^.,,}
675DEP_MACHINE := ${_dm}
676_machines := ${_machines:${M_dep_qual_fixes.${DEP_MACHINE}:U${M_dep_qual_fixes}:ts:}:O:u}
677.endif
678
679# reset each time through
680_build_dirs =
681
682.if ${DEP_RELDIR} == ${_DEP_RELDIR} && ${_CURDIR} != ${SRCTOP}
683# pickup other machines for this dir if necessary
684_build_dirs += ${_machines:@m@${_CURDIR}.$m@}
685.endif
686
687.if ${_debug_reldir}
688.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: nDIRDEPS=${DIRDEPS:[#]}
689.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS=${DIRDEPS:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
690.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}'
691.endif
692
693.if !empty(DIRDEPS)
694# these we reset each time through as they can depend on DEP_MACHINE
695DEP_DIRDEPS_FILTER = \
696	${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \
697	${TARGET_SPEC_VARS:@v@${DIRDEPS_FILTER.${DEP_$v}:U}@} \
698	${DIRDEPS_FILTER:U}
699
700.if empty(DEP_DIRDEPS_FILTER)
701# something harmless
702DEP_DIRDEPS_FILTER = u
703.endif
704
705# this is applied after we have computed build dirs
706# so everything is fully qualified and starts with ${SRCTOP}/
707DEP_DIRDEPS_BUILD_DIR_FILTER = \
708	${DIRDEPS_BUILD_DIR_FILTER.${DEP_TARGET_SPEC}:U} \
709	${TARGET_SPEC_VARS:@v@${DIRDEPS_BUILD_DIR_FILTER.${DEP_$v}:U}@} \
710	${DIRDEPS_BUILD_DIR_FILTER:U}
711
712.if empty(DEP_DIRDEPS_BUILD_DIR_FILTER)
713# something harmless
714DEP_DIRDEPS_BUILD_DIR_FILTER = u
715.endif
716
717# this is what we start with
718__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@}
719
720# some entries may be qualified with .<machine> or .<target_spec>
721# we can tell the unqualified ones easily - because they exist
722__unqual_depdirs := ${__depdirs:@d@${exists($d):?$d:}@}
723__qual_depdirs := ${__depdirs:${__unqual_depdirs:Uno:${M_ListToSkip}}}
724
725.if ${DEP_RELDIR} == ${_DEP_RELDIR}
726# if it was called out - we likely need it.
727__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} \
728	${DPADD:U.:M${HOST_OBJTOP32:Uno}/*:S,${HOST_OBJTOP32:Uno}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host32,:N.*:@d@${SRCTOP}/$d@}
729__qual_depdirs += ${__hostdpadd}
730.endif
731
732.if ${_debug_reldir}
733.info DEP_DIRDEPS_FILTER=${DEP_DIRDEPS_FILTER:ts:}
734.info DEP_DIRDEPS_BUILD_DIR_FILTER=${DEP_DIRDEPS_BUILD_DIR_FILTER:ts:}
735.info depdirs=${__depdirs:S,^${SRCTOP}/,,:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
736.info qualified=${__qual_depdirs:S,^${SRCTOP}/,,:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
737.info unqualified=${__unqual_depdirs:S,^${SRCTOP}/,,:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
738.endif
739
740# _build_dirs is what we will feed to _DIRDEP_USE
741_build_dirs += \
742	${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \
743	${__qual_depdirs:N*.host} \
744	${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \
745	${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@}
746
747# qualify everything now
748.if ${_debug_reldir}
749.info _build_dirs=${_build_dirs:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
750.endif
751# make sure we do not mess with qualifying "host" entries
752_build_dirs := ${_build_dirs:M*.host*:${M_dep_qual_fixes.host:ts:}} \
753	${_build_dirs:N*.host*:${M_dep_qual_fixes:ts:}}
754# some filters can only be applied now
755_build_dirs := ${_build_dirs:${DEP_DIRDEPS_BUILD_DIR_FILTER:ts:}:O:u}
756.if ${_debug_reldir}
757.info _build_dirs=${_build_dirs:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
758.endif
759
760.endif				# empty DIRDEPS
761
762_build_all_dirs += ${_build_dirs} ${_build_xtra_dirs}
763_build_all_dirs := ${_build_all_dirs:O:u}
764
765# we prefer DIRDEPS_EXPORT_VARS
766.if empty(DIRDEPS_EXPORT_VARS) && !empty(DEP_EXPORT_VARS)
767DIRDEPS_EXPORT_VARS = ${DEP_EXPORT_VARS}
768.endif
769
770# Normally if doing make -V something,
771# we do not want to waste time chasing DIRDEPS
772# but if we want to count the number of Makefile.depend* read, we do.
773.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS:U}} == ""
774.if !empty(_build_all_dirs)
775.if ${BUILD_DIRDEPS_CACHE} == "yes"
776# we use _cache_script to minimize the number of times we fork the shell
777_cache_script = echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}';
778# guard against _new_dirdeps being too big for a single command line
779_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@:S,^${SRCTOP}/,,}
780_cache_xtra_deps := ${_build_xtra_dirs:S,^${SRCTOP}/,,}
781.if !empty(DIRDEPS_EXPORT_VARS)
782# Discouraged, but there are always exceptions.
783# Handle it here rather than explain how.
784_cache_xvars := echo; ${DIRDEPS_EXPORT_VARS:@v@echo '$v = ${$v}';@} echo '.export ${DIRDEPS_EXPORT_VARS}'; echo;
785_cache_script += ${_cache_xvars}
786.endif
787.else
788# this makes it all happen
789dirdeps: ${_build_all_dirs}
790.endif
791${_build_all_dirs}:	_DIRDEP_USE
792
793.if ${_debug_reldir}
794.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs:S,^${SRCTOP}/,,:${DEBUG_DIRDEPS_LIST_FILTER:U:N/:ts:}}
795.endif
796
797# this builds the dependency graph
798.for m in ${_machines}
799.if ${BUILD_DIRDEPS_CACHE} == "yes" && !empty(_build_dirs)
800_cache_deps =
801_cache_script += echo; echo 'DIRDEPS.${_this_dir}.$m = \';
802.endif
803# it would be nice to do :N${.TARGET}
804.if !empty(__qual_depdirs)
805.for q in ${__qual_depdirs:M*.host*:${M_dep_qual_fixes.host:ts:}:E:O:u:N$m} \
806	${__qual_depdirs:N*.host*:${M_dep_qual_fixes:ts:}:E:O:u:N$m}
807.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != ""
808.info ${DEP_RELDIR}.$m: q=$q graph: ${_build_dirs:M*.$q:S,^${SRCTOP}/,,}
809.endif
810.if ${BUILD_DIRDEPS_CACHE} == "yes"
811_cache_deps += ${_build_dirs:M*.$q:S,^${SRCTOP}/,,}
812.else
813${_this_dir}.$m: ${_build_dirs:M*.$q}
814.endif
815.endfor
816.endif
817.if ${_debug_reldir}
818.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,}
819.endif
820.if ${BUILD_DIRDEPS_CACHE} == "yes"
821.if !empty(_build_dirs)
822_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,}
823# anything in _{build,env}_xtra_dirs is hooked to dirdeps: only
824.if ${MAKE_VERSION} < 20240105
825.if !empty(_cache_deps)
826.export _cache_deps
827_cache_script += for x in $$_cache_deps; do echo "	_{SRCTOP}/$$x \\"; done;
828.endif
829.export _cache_xtra_deps _new_dirdeps
830x!= echo; { echo; ${_cache_script} echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \
831	echo; echo 'dirdeps: ${_this_dir}.$m \'; \
832	for x in $$_cache_xtra_deps; do echo "	_{SRCTOP}/$$x \\"; done; \
833	echo; for x in $$_new_dirdeps; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3
834.else
835# we do not have the same limits on command lines
836.if !empty(_cache_deps)
837_cache_script += for x in ${_cache_deps}; do echo "	_{SRCTOP}/$$x \\"; done;
838.endif
839x!= echo; { echo; ${_cache_script} echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \
840	echo; echo 'dirdeps: ${_this_dir}.$m \'; \
841	for x in ${_cache_xtra_deps}; do echo "	_{SRCTOP}/$$x \\"; done; \
842	echo; for x in ${_new_dirdeps}; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3
843.endif
844.endif
845.else
846${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m}
847.endif
848.endfor
849
850.endif
851
852.if !empty(DIRDEPS_EXPORT_VARS)
853.if ${BUILD_DIRDEPS_CACHE} == "no"
854.export ${DIRDEPS_EXPORT_VARS}
855.endif
856# Reset these, we are done with them for this iteration.
857DIRDEPS_EXPORT_VARS =
858DEP_EXPORT_VARS =
859.endif
860
861# Now find more dependencies - and recurse.
862.for d in ${_build_all_dirs}
863.if !target(_dirdeps_checked.$d)
864# once only
865_dirdeps_checked.$d:
866_dr := ${d:S,^${SRCTOP}/,,}
867.if ${_debug_search}
868.info checking ${_dr}
869.endif
870# Note: _build_all_dirs is fully qualifed so d:R is always the directory
871.if exists(${d:R})
872# we pass _DEP_TARGET_SPEC to tell the next step what we want
873_DEP_TARGET_SPEC := ${d:E}
874# some makefiles may still look at this
875_DEP_MACHINE := ${d:E:C/,.*//}
876DEP_MACHINE := ${_DEP_MACHINE}
877# set these too in case Makefile.depend* uses them
878.if ${DEP_TARGET_SPEC_VARS:[#]} > 1
879_dtspec := ${_DEP_TARGET_SPEC:S/,/ /g}
880.for i in ${_tspec_x}
881DEP_${DEP_TARGET_SPEC_VARS:[$i]} := ${_dtspec:[$i]}
882.endfor
883.endif
884# Warning: there is an assumption here that MACHINE is always
885# the first entry in TARGET_SPEC_VARS.
886# If TARGET_SPEC and MACHINE are insufficient, you have a problem.
887_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:C;${MACHINE}((,.+)?)$;${d:E:C/,.*//}\1;:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]}
888.if !empty(_m)
889# M_dep_qual_fixes isn't geared to Makefile.depend
890_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes.${d:E}:U${M_dep_qual_fixes}:ts:}}
891# set this "just in case"
892# we can skip :tA since we computed the path above
893DEP_RELDIR := ${_m:H:S,^${SRCTOP}/,,}
894# and reset this
895DIRDEPS =
896.if ${_debug_search} || ${_debug_reldir}
897.info Loading ${_m:S,${SRCTOP}/,,} for ${_dr}
898.endif
899.include <${_m}>
900.else
901# set these as if we found Makefile.depend*
902DEP_RELDIR := ${_dr:R}
903DIRDEPS =
904.if ${_debug_reldir}
905.info loading local.dirdeps-missing.mk for ${_dr}
906.endif
907.-include <local.dirdeps-missing.mk>
908.endif
909.endif
910.endif
911.endfor
912
913.endif				# -V
914.endif				# BUILD_DIRDEPS
915
916.elif ${.MAKE.LEVEL} > 42
917.error You should have stopped recursing by now.
918.else
919# we are building something
920DEP_RELDIR := ${RELDIR}
921_DEP_RELDIR := ${RELDIR}
922# Since we are/should be included by .MAKE.DEPENDFILE
923# This is a final opportunity to add/hook global rules.
924.-include <local.dirdeps-build.mk>
925
926# skip _reldir_{finish,failed} if not included from Makefile.depend*
927# or not in meta mode
928.if !defined(WITHOUT_META_STATS) && ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" && ${.MAKE.MODE:Mmeta} != ""
929
930meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \
931	created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}}
932
933.if !target(_reldir_finish)
934.END: _reldir_finish
935_reldir_finish: .NOMETA
936	@echo "${TRACER}Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}"
937.endif
938
939.if !target(_reldir_failed)
940.ERROR: _reldir_failed
941_reldir_failed: .NOMETA
942	@echo "${TRACER}Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}"
943.endif
944
945.endif
946
947# pickup local dependencies
948.if ${MAKE_VERSION} < 20160220
949.-include <.depend>
950.else
951.dinclude <.depend>
952.endif
953.endif
954
955# bootstrapping new dependencies made easy?
956.if !target(bootstrap-empty)
957.if !target(bootstrap) && (make(bootstrap) || \
958	make(bootstrap-this) || \
959	make(bootstrap-recurse) || \
960	make(bootstrap-empty))
961
962# if we are bootstrapping create the default
963_want = ${.CURDIR}/${.MAKE.DEPENDFILE_DEFAULT:T}
964
965.if exists(${_want})
966# stop here
967${.TARGETS:Mboot*}:
968.elif !make(bootstrap-empty)
969# find a Makefile.depend to use as _src
970_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo
971.if empty(_src)
972.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty
973.endif
974
975_src?= ${.MAKE.DEPENDFILE}
976
977.MAKE.DEPENDFILE_BOOTSTRAP_SED+= -e 's/${_src:E:C/,.*//}/${MACHINE}/g'
978
979# just create Makefile.depend* for this dir
980bootstrap-this:	.NOTMAIN
981	@echo Bootstrapping ${RELDIR}/${_want:T} from ${_src:T}; \
982	echo You need to build ${RELDIR} to correctly populate it.
983.if ${_src:T} != ${.MAKE.DEPENDFILE_PREFIX:T}
984	(cd ${.CURDIR} && sed ${.MAKE.DEPENDFILE_BOOTSTRAP_SED} ${_src} > ${_want:T})
985.else
986	cp ${.CURDIR}/${_src:T} ${_want}
987.endif
988
989# create Makefile.depend* for this dir and its dependencies
990bootstrap: bootstrap-recurse
991bootstrap-recurse: bootstrap-this
992
993_mf := ${.PARSEFILE}
994bootstrap-recurse:	.NOTMAIN .MAKE
995	@cd ${SRCTOP} && \
996	for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \
997		test -d $$d || d=$${d%.*}; \
998		test -d $$d || continue; \
999		echo "Checking $$d for bootstrap ..."; \
1000		(cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \
1001	done
1002
1003.endif
1004
1005# create an empty Makefile.depend* to get the ball rolling.
1006bootstrap-empty: .NOTMAIN .NOMETA
1007	@echo Creating empty ${RELDIR}/${_want:T}; \
1008	echo You need to build ${RELDIR} to correctly populate it.
1009	@{ echo DIRDEPS=; echo ".include <dirdeps.mk>"; } > ${_want}
1010
1011.endif
1012.endif
1013