1# $Id: dirdeps.mk,v 1.67 2016/04/18 21:50:47 sjg Exp $ 2 3# Copyright (c) 2010-2013, Juniper Networks, Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 16# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 17# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 18# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 19# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 20# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 21# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 25# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 27# Much of the complexity here is for supporting cross-building. 28# If a tree does not support that, simply using plain Makefile.depend 29# should provide sufficient clue. 30# Otherwise the recommendation is to use Makefile.depend.${MACHINE} 31# as expected below. 32 33# Note: this file gets multiply included. 34# This is what we do with DIRDEPS 35 36# DIRDEPS: 37# This is a list of directories - relative to SRCTOP, it is 38# normally only of interest to .MAKE.LEVEL 0. 39# In some cases the entry may be qualified with a .<machine> 40# or .<target_spec> suffix (see TARGET_SPEC_VARS below), 41# for example to force building something for the pseudo 42# machines "host" or "common" regardless of current ${MACHINE}. 43# 44# All unqualified entries end up being qualified with .${TARGET_SPEC} 45# and partially qualified (if TARGET_SPEC_VARS has multiple 46# entries) are also expanded to a full .<target_spec>. 47# The _DIRDEP_USE target uses the suffix to set TARGET_SPEC 48# correctly when visiting each entry. 49# 50# The fully qualified directory entries are used to construct a 51# dependency graph that will drive the build later. 52# 53# Also, for each fully qualified directory target, we will search 54# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional 55# dependencies. We use Makefile.depend (default value for 56# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to 57# distinguish them from others. 58# 59# Each Makefile.depend file sets DEP_RELDIR to be the 60# the RELDIR (path relative to SRCTOP) for its directory, and 61# since each Makefile.depend file includes dirdeps.mk, this 62# processing is recursive and results in .MAKE.LEVEL 0 learning the 63# dependencies of the tree wrt the initial directory (_DEP_RELDIR). 64# 65# BUILD_AT_LEVEL0 66# Indicates whether .MAKE.LEVEL 0 builds anything: 67# if "no" sub-makes are used to build everything, 68# if "yes" sub-makes are only used to build for other machines. 69# It is best to use "no", but this can require fixing some 70# makefiles to not do anything at .MAKE.LEVEL 0. 71# 72# TARGET_SPEC_VARS 73# The default value is just MACHINE, and for most environments 74# this is sufficient. The _DIRDEP_USE target actually sets 75# both MACHINE and TARGET_SPEC to the suffix of the current 76# target so that in the general case TARGET_SPEC can be ignored. 77# 78# If more than MACHINE is needed then sys.mk needs to decompose 79# TARGET_SPEC and set the relevant variables accordingly. 80# It is important that MACHINE be included in and actually be 81# the first member of TARGET_SPEC_VARS. This allows other 82# variables to be considered optional, and some of the treatment 83# below relies on MACHINE being the first entry. 84# Note: TARGET_SPEC cannot contain any '.'s so the target 85# triple used by compiler folk won't work (directly anyway). 86# 87# For example: 88# 89# # Always list MACHINE first, 90# # other variables might be optional. 91# TARGET_SPEC_VARS = MACHINE TARGET_OS 92# .if ${TARGET_SPEC:Uno:M*,*} != "" 93# _tspec := ${TARGET_SPEC:S/,/ /g} 94# MACHINE := ${_tspec:[1]} 95# TARGET_OS := ${_tspec:[2]} 96# # etc. 97# # We need to stop that TARGET_SPEC affecting any submakes 98# # and deal with MACHINE=${TARGET_SPEC} in the environment. 99# TARGET_SPEC = 100# # export but do not track 101# .export-env TARGET_SPEC 102# .export ${TARGET_SPEC_VARS} 103# .for v in ${TARGET_SPEC_VARS:O:u} 104# .if empty($v) 105# .undef $v 106# .endif 107# .endfor 108# .endif 109# # make sure we know what TARGET_SPEC is 110# # as we may need it to find Makefile.depend* 111# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 112# 113 114# touch this at your peril 115_DIRDEP_USE_LEVEL?= 0 116.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL} 117# only the first instance is interested in all this 118 119# First off, we want to know what ${MACHINE} to build for. 120# This can be complicated if we are using a mixture of ${MACHINE} specific 121# and non-specific Makefile.depend* 122 123.if !target(_DIRDEP_USE) 124 125.if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*/*} != "" 126# This little trick let's us do 127# 128# mk -f dirdeps.mk some/dir.${TARGET_SPEC} 129# 130all: 131${.TARGETS:Nall}: all 132DIRDEPS := ${.TARGETS:M*[/.]*} 133# so that -DNO_DIRDEPS works 134DEP_RELDIR := ${DIRDEPS:[1]:R} 135# this will become DEP_MACHINE below 136TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//} 137.if ${TARGET_MACHINE:N*/*} == "" 138TARGET_MACHINE := ${MACHINE} 139.endif 140# disable DIRDEPS_CACHE as it does not like this trick 141MK_DIRDEPS_CACHE = no 142.endif 143 144# make sure we get the behavior we expect 145.MAKE.SAVE_DOLLARS = no 146 147# do some setup we only need once 148_CURDIR ?= ${.CURDIR} 149_OBJDIR ?= ${.OBJDIR} 150 151now_utc = ${%s:L:gmtime} 152.if !defined(start_utc) 153start_utc := ${now_utc} 154.endif 155 156# make sure these are empty to start with 157_DEP_TARGET_SPEC = 158 159# If TARGET_SPEC_VARS is other than just MACHINE 160# it should be set by sys.mk or similar by now. 161# TARGET_SPEC must not contain any '.'s. 162TARGET_SPEC_VARS ?= MACHINE 163# this is what we started with 164TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 165# this is what we mostly use below 166DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,} 167# make sure we have defaults 168.for v in ${TARGET_SPEC_VARS} 169DEP_$v ?= ${$v} 170.endfor 171 172.if ${TARGET_SPEC_VARS:[#]} > 1 173# Ok, this gets more complex (putting it mildly). 174# In order to stay sane, we need to ensure that all the build_dirs 175# we compute below are fully qualified wrt DEP_TARGET_SPEC. 176# The makefiles may only partially specify (eg. MACHINE only), 177# so we need to construct a set of modifiers to fill in the gaps. 178# jot 10 should output 1 2 3 .. 10 179JOT ?= jot 180_tspec_x := ${${JOT} ${TARGET_SPEC_VARS:[#]}:L:sh} 181# this handles unqualified entries 182M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC}; 183# there needs to be at least one item missing for these to make sense 184.for i in ${_tspec_x:[2..-1]} 185_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,} 186_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,} 187M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i}; 188.endfor 189.else 190# A harmless? default. 191M_dep_qual_fixes = U 192.endif 193 194.if !defined(.MAKE.DEPENDFILE_PREFERENCE) 195# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater? 196# you really want this set by sys.mk or similar 197.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T} 198.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}" 199.if ${TARGET_SPEC} != ${MACHINE} 200.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE} 201.endif 202.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R} 203.endif 204.endif 205 206_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T} 207_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*} 208 209# for machine specific dependfiles we require ${MACHINE} to be at the end 210# also for the sake of sanity we require a common prefix 211.if !defined(.MAKE.DEPENDFILE_PREFIX) 212# knowing .MAKE.DEPENDFILE_PREFIX helps 213.if !empty(_machine_dependfiles) 214.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R} 215.else 216.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T} 217.endif 218.endif 219 220 221# this is how we identify non-machine specific dependfiles 222N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}} 223 224.endif # !target(_DIRDEP_USE) 225 226# if we were included recursively _DEP_TARGET_SPEC should be valid. 227.if empty(_DEP_TARGET_SPEC) 228# we may or may not have included a dependfile yet 229.if defined(.INCLUDEDFROMFILE) 230_last_dependfile := ${.INCLUDEDFROMFILE:M${.MAKE.DEPENDFILE_PREFIX}*} 231.else 232_last_dependfile := ${.MAKE.MAKEFILES:M*/${.MAKE.DEPENDFILE_PREFIX}*:[-1]} 233.endif 234.if ${_debug_reldir:U0} 235.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _last_dependfile='${_last_dependfile}' 236.endif 237 238.if empty(_last_dependfile) || ${_last_dependfile:E:${N_notmachine}} == "" 239# this is all we have to work with 240DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}} 241_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC} 242.else 243_DEP_TARGET_SPEC = ${_last_dependfile:${M_dep_qual_fixes:ts:}:E} 244.endif 245.if !empty(_last_dependfile) 246# record that we've read dependfile for this 247_dirdeps_checked.${_CURDIR}.${TARGET_SPEC}: 248.endif 249.endif 250 251# by now _DEP_TARGET_SPEC should be set, parse it. 252.if ${TARGET_SPEC_VARS:[#]} > 1 253# we need to parse DEP_MACHINE may or may not contain more info 254_tspec := ${_DEP_TARGET_SPEC:S/,/ /g} 255.for i in ${_tspec_x} 256DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]} 257.endfor 258.for v in ${TARGET_SPEC_VARS:O:u} 259.if empty(DEP_$v) 260.undef DEP_$v 261.endif 262.endfor 263.else 264DEP_MACHINE := ${_DEP_TARGET_SPEC} 265.endif 266 267# reset each time through 268_build_all_dirs = 269 270# the first time we are included the _DIRDEP_USE target will not be defined 271# we can use this as a clue to do initialization and other one time things. 272.if !target(_DIRDEP_USE) 273# make sure this target exists 274dirdeps: beforedirdeps .WAIT 275beforedirdeps: 276 277# We normally expect to be included by Makefile.depend.* 278# which sets the DEP_* macros below. 279DEP_RELDIR ?= ${RELDIR} 280 281# this can cause lots of output! 282# set to a set of glob expressions that might match RELDIR 283DEBUG_DIRDEPS ?= no 284 285# remember the initial value of DEP_RELDIR - we test for it below. 286_DEP_RELDIR := ${DEP_RELDIR} 287 288.endif 289 290# pickup customizations 291# as below you can use !target(_DIRDEP_USE) to protect things 292# which should only be done once. 293.-include <local.dirdeps.mk> 294 295.if !target(_DIRDEP_USE) 296# things we skip for host tools 297SKIP_HOSTDIR ?= 298 299NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}} 300 301# things we always skip 302# SKIP_DIRDEPS allows for adding entries on command line. 303SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS} 304SKIP_DIR.host += ${SKIP_HOSTDIR} 305 306DEP_SKIP_DIR = ${SKIP_DIR} \ 307 ${SKIP_DIR.${DEP_TARGET_SPEC}:U} \ 308 ${SKIP_DIR.${DEP_MACHINE}:U} \ 309 ${SKIP_DIRDEPS.${DEP_MACHINE}:U} 310 311NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}} 312 313.if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS) 314NO_DIRDEPS = 315.elif defined(WITHOUT_DIRDEPS_BELOW) 316NO_DIRDEPS_BELOW = 317.endif 318 319.if defined(NO_DIRDEPS) 320# confine ourselves to the original dir and below. 321DIRDEPS_FILTER += M${_DEP_RELDIR}* 322.elif defined(NO_DIRDEPS_BELOW) 323DIRDEPS_FILTER += M${_DEP_RELDIR} 324.endif 325 326# this is what we run below 327DIRDEP_MAKE?= ${.MAKE} 328 329# we suppress SUBDIR when visiting the leaves 330# we assume sys.mk will set MACHINE_ARCH 331# you can add extras to DIRDEP_USE_ENV 332# if there is no makefile in the target directory, we skip it. 333_DIRDEP_USE: .USE .MAKE 334 @for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \ 335 test -s ${.TARGET:R}/$$m || continue; \ 336 echo "${TRACER}Checking ${.TARGET:R} for ${.TARGET:E} ..."; \ 337 MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \ 338 TARGET_SPEC=${.TARGET:E} \ 339 MACHINE=${.TARGET:E} \ 340 ${DIRDEP_MAKE} -C ${.TARGET:R} || exit 1; \ 341 break; \ 342 done 343 344.ifdef ALL_MACHINES 345# this is how you limit it to only the machines we have been built for 346# previously. 347.if empty(ONLY_MACHINE_LIST) 348.if !empty(ALL_MACHINE_LIST) 349# ALL_MACHINE_LIST is the list of all legal machines - ignore anything else 350_machine_list != cd ${_CURDIR} && 'ls' -1 ${ALL_MACHINE_LIST:O:u:@m@${.MAKE.DEPENDFILE:T:R}.$m@} 2> /dev/null; echo 351.else 352_machine_list != 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}.* 2> /dev/null; echo 353.endif 354_only_machines := ${_machine_list:${NIgnoreFiles:UN*.bak}:E:O:u} 355.else 356_only_machines := ${ONLY_MACHINE_LIST} 357.endif 358 359.if empty(_only_machines) 360# we must be boot-strapping 361_only_machines := ${TARGET_MACHINE:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}} 362.endif 363 364.else # ! ALL_MACHINES 365# if ONLY_MACHINE_LIST is set, we are limited to that 366# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST 367# otherwise DEP_MACHINE is it - so DEP_MACHINE will match. 368_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}} 369.endif 370 371.if !empty(NOT_MACHINE_LIST) 372_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}} 373.endif 374 375# make sure we have a starting place? 376DIRDEPS ?= ${RELDIR} 377.endif # target 378 379# if repeatedly building the same target, 380# we can avoid the overhead of re-computing the tree dependencies. 381MK_DIRDEPS_CACHE ?= no 382BUILD_DIRDEPS_CACHE ?= no 383BUILD_DIRDEPS ?= yes 384 385.if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW) 386.if ${MK_DIRDEPS_CACHE} == "yes" 387# this is where we will cache all our work 388DIRDEPS_CACHE?= ${_OBJDIR}/dirdeps.cache${.TARGETS:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.} 389 390# just ensure this exists 391build-dirdeps: 392 393M_oneperline = @x@\\${.newline} $$x@ 394 395.if ${BUILD_DIRDEPS_CACHE} == "no" 396.if !target(dirdeps-cached) 397# we do this via sub-make 398BUILD_DIRDEPS = no 399 400dirdeps: dirdeps-cached 401dirdeps-cached: ${DIRDEPS_CACHE} .MAKE 402 @echo "${TRACER}Using ${DIRDEPS_CACHE}" 403 @MAKELEVEL=${.MAKE.LEVEL} ${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \ 404 dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no 405 406# these should generally do 407BUILD_DIRDEPS_MAKEFILE ?= ${MAKEFILE} 408BUILD_DIRDEPS_TARGETS ?= ${.TARGETS} 409 410# we need the .meta file to ensure we update if 411# any of the Makefile.depend* changed. 412# We do not want to compare the command line though. 413${DIRDEPS_CACHE}: .META .NOMETA_CMP 414 +@{ echo '# Autogenerated - do NOT edit!'; echo; \ 415 echo 'BUILD_DIRDEPS=no'; echo; \ 416 echo '.include <dirdeps.mk>'; \ 417 } > ${.TARGET}.new 418 +@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \ 419 DIRDEPS="${DIRDEPS}" \ 420 MAKEFLAGS= ${.MAKE} -C ${_CURDIR} -f ${BUILD_DIRDEPS_MAKEFILE} \ 421 ${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \ 422 .MAKE.DEPENDFILE=.none \ 423 ${.MAKEFLAGS:tW:S,-D ,-D,g:tw:M*WITH*} \ 424 3>&1 1>&2 | sed 's,${SRCTOP},$${SRCTOP},g' >> ${.TARGET}.new && \ 425 mv ${.TARGET}.new ${.TARGET} 426 427.endif 428.elif !target(_count_dirdeps) 429# we want to capture the dirdeps count in the cache 430.END: _count_dirdeps 431_count_dirdeps: .NOMETA 432 @echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]}' >&3 433 434.endif 435.elif !make(dirdeps) && !target(_count_dirdeps) 436beforedirdeps: _count_dirdeps 437_count_dirdeps: .NOMETA 438 @echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} seconds=`expr ${now_utc} - ${start_utc}`" 439 440.endif 441.endif 442 443.if ${BUILD_DIRDEPS} == "yes" 444.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != "" 445_debug_reldir = 1 446.else 447_debug_reldir = 0 448.endif 449.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend:L:M$x}@} != "" 450_debug_search = 1 451.else 452_debug_search = 0 453.endif 454 455# the rest is done repeatedly for every Makefile.depend we read. 456# if we are anything but the original dir we care only about the 457# machine type we were included for.. 458 459.if ${DEP_RELDIR} == "." 460_this_dir := ${SRCTOP} 461.else 462_this_dir := ${SRCTOP}/${DEP_RELDIR} 463.endif 464 465# on rare occasions, there can be a need for extra help 466_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc 467.-include <${_dep_hack}> 468 469.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC} 470# this should be all 471_machines := ${DEP_MACHINE} 472.else 473# this is the machine list we actually use below 474_machines := ${_only_machines} 475 476.if defined(HOSTPROG) || ${DEP_MACHINE} == "host" 477# we need to build this guy's dependencies for host as well. 478_machines += host 479.endif 480 481_machines := ${_machines:O:u} 482.endif 483 484.if ${TARGET_SPEC_VARS:[#]} > 1 485# we need to tweak _machines 486_dm := ${DEP_MACHINE} 487# apply the same filtering that we do when qualifying DIRDEPS. 488# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.' 489_machines := ${_machines:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} 490DEP_MACHINE := ${_dm} 491.endif 492 493# reset each time through 494_build_dirs = 495 496.if ${DEP_RELDIR} == ${_DEP_RELDIR} 497# pickup other machines for this dir if necessary 498.if ${BUILD_AT_LEVEL0:Uyes} == "no" 499_build_dirs += ${_machines:@m@${_CURDIR}.$m@} 500.else 501_build_dirs += ${_machines:N${DEP_TARGET_SPEC}:@m@${_CURDIR}.$m@} 502.if ${DEP_TARGET_SPEC} == ${TARGET_SPEC} 503# pickup local dependencies now 504.if ${MAKE_VERSION} < 20160220 505.-include <.depend> 506.else 507.dinclude <.depend> 508.endif 509.endif 510.endif 511.endif 512 513.if ${_debug_reldir} 514.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}' 515.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}' 516.endif 517 518.if !empty(DIRDEPS) 519# these we reset each time through as they can depend on DEP_MACHINE 520DEP_DIRDEPS_FILTER = \ 521 ${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \ 522 ${DIRDEPS_FILTER.${DEP_MACHINE}:U} \ 523 ${DIRDEPS_FILTER:U} 524.if empty(DEP_DIRDEPS_FILTER) 525# something harmless 526DEP_DIRDEPS_FILTER = U 527.endif 528 529# this is what we start with 530__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@} 531 532# some entries may be qualified with .<machine> 533# the :M*/*/*.* just tries to limit the dirs we check to likely ones. 534# the ${d:E:M*/*} ensures we don't consider junos/usr.sbin/mgd 535__qual_depdirs := ${__depdirs:M*/*/*.*:@d@${exists($d):?:${"${d:E:M*/*}":?:${exists(${d:R}):?$d:}}}@} 536__unqual_depdirs := ${__depdirs:${__qual_depdirs:Uno:${M_ListToSkip}}} 537 538.if ${DEP_RELDIR} == ${_DEP_RELDIR} 539# if it was called out - we likely need it. 540__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} 541__qual_depdirs += ${__hostdpadd} 542.endif 543 544.if ${_debug_reldir} 545.info depdirs=${__depdirs} 546.info qualified=${__qual_depdirs} 547.info unqualified=${__unqual_depdirs} 548.endif 549 550# _build_dirs is what we will feed to _DIRDEP_USE 551_build_dirs += \ 552 ${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \ 553 ${__qual_depdirs:N*.host} \ 554 ${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \ 555 ${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@} 556 557# qualify everything now 558_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u} 559 560_build_all_dirs += ${_build_dirs} 561_build_all_dirs := ${_build_all_dirs:O:u} 562 563.endif # empty DIRDEPS 564 565# Normally if doing make -V something, 566# we do not want to waste time chasing DIRDEPS 567# but if we want to count the number of Makefile.depend* read, we do. 568.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS}} == "" 569.if !empty(_build_all_dirs) 570.if ${BUILD_DIRDEPS_CACHE} == "yes" 571x!= { echo; echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}'; \ 572 echo 'dirdeps: ${_build_all_dirs:${M_oneperline}}'; echo; } >&3; echo 573x!= { ${_build_all_dirs:@x@${target($x):?:echo '$x: _DIRDEP_USE';}@} echo; } >&3; echo 574.else 575# this makes it all happen 576dirdeps: ${_build_all_dirs} 577.endif 578${_build_all_dirs}: _DIRDEP_USE 579 580.if ${_debug_reldir} 581.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs} 582.endif 583 584# this builds the dependency graph 585.for m in ${_machines} 586# it would be nice to do :N${.TARGET} 587.if !empty(__qual_depdirs) 588.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m} 589.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != "" 590.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q} 591.endif 592.if ${BUILD_DIRDEPS_CACHE} == "yes" 593x!= { echo; echo '${_this_dir}.$m: ${_build_dirs:M*.$q:${M_oneperline}}'; echo; } >&3; echo 594.else 595${_this_dir}.$m: ${_build_dirs:M*.$q} 596.endif 597.endfor 598.endif 599.if ${_debug_reldir} 600.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m} 601.endif 602.if ${BUILD_DIRDEPS_CACHE} == "yes" 603x!= { echo; echo '${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m:${M_oneperline}}'; echo; } >&3; echo 604.else 605${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} 606.endif 607.endfor 608 609.endif 610 611# Now find more dependencies - and recurse. 612.for d in ${_build_all_dirs} 613.if !target(_dirdeps_checked.$d) 614# once only 615_dirdeps_checked.$d: 616.if ${_debug_search} 617.info checking $d 618.endif 619# Note: _build_all_dirs is fully qualifed so d:R is always the directory 620.if exists(${d:R}) 621# Warning: there is an assumption here that MACHINE is always 622# the first entry in TARGET_SPEC_VARS. 623# If TARGET_SPEC and MACHINE are insufficient, you have a problem. 624_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:S;${MACHINE};${d:E:C/,.*//};:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]} 625.if !empty(_m) 626# M_dep_qual_fixes isn't geared to Makefile.depend 627_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}} 628.if ${_debug_search} 629.info Looking for ${_qm} 630.endif 631# we pass _DEP_TARGET_SPEC to tell the next step what we want 632_DEP_TARGET_SPEC := ${d:E} 633# some makefiles may still look at this 634_DEP_MACHINE := ${d:E:C/,.*//} 635# set this "just in case" 636# we can skip :tA since we computed the path above 637DEP_RELDIR := ${_m:H:S,${SRCTOP}/,,} 638# and reset this 639DIRDEPS = 640.if ${_debug_reldir} && ${_qm} != ${_m} 641.info loading ${_m} for ${d:E} 642.endif 643.include <${_m}> 644.endif 645.endif 646.endif 647.endfor 648 649.endif # -V 650.endif # BUILD_DIRDEPS 651 652.elif ${.MAKE.LEVEL} > 42 653.error You should have stopped recursing by now. 654.else 655# we are building something 656DEP_RELDIR := ${RELDIR} 657_DEP_RELDIR := ${RELDIR} 658# pickup local dependencies 659.if ${MAKE_VERSION} < 20160220 660.-include <.depend> 661.else 662.dinclude <.depend> 663.endif 664.endif 665 666# bootstrapping new dependencies made easy? 667.if !target(bootstrap) && (make(bootstrap) || \ 668 make(bootstrap-this) || \ 669 make(bootstrap-recurse) || \ 670 make(bootstrap-empty)) 671 672.if exists(${.CURDIR}/${.MAKE.DEPENDFILE:T}) 673# stop here 674${.TARGETS:Mboot*}: 675.elif !make(bootstrap-empty) 676# find a Makefile.depend to use as _src 677_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo 678.if empty(_src) 679.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty 680.endif 681 682_src?= ${.MAKE.DEPENDFILE:T} 683 684# just create Makefile.depend* for this dir 685bootstrap-this: .NOTMAIN 686 @echo Bootstrapping ${RELDIR}/${.MAKE.DEPENDFILE:T} from ${_src:T} 687 (cd ${.CURDIR} && sed 's,${_src:E},${MACHINE},g' ${_src} > ${.MAKE.DEPENDFILE:T}) 688 689# create Makefile.depend* for this dir and its dependencies 690bootstrap: bootstrap-recurse 691bootstrap-recurse: bootstrap-this 692 693_mf := ${.PARSEFILE} 694bootstrap-recurse: .NOTMAIN .MAKE 695 @cd ${SRCTOP} && \ 696 for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \ 697 test -d $$d || d=$${d%.*}; \ 698 test -d $$d || continue; \ 699 echo "Checking $$d for bootstrap ..."; \ 700 (cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \ 701 done 702 703.endif 704 705# create an empty Makefile.depend* to get the ball rolling. 706bootstrap-empty: .NOTMAIN .NOMETA 707 @echo Creating empty ${RELDIR}/${.MAKE.DEPENDFILE:T}; \ 708 echo You need to build ${RELDIR} to correctly populate it. 709 @{ echo DIRDEPS=; echo ".include <dirdeps.mk>"; } > ${.CURDIR}/${.MAKE.DEPENDFILE:T} 710 711.endif 712