xref: /freebsd/contrib/bmake/for.c (revision 058ac3e8063366dafa634d9107642e12b038bf09)
1 /*	$NetBSD: for.c,v 1.168 2022/06/12 16:09:21 rillig Exp $	*/
2 
3 /*
4  * Copyright (c) 1992, The Regents of the University of California.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. Neither the name of the University nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  */
31 
32 /*
33  * Handling of .for/.endfor loops in a makefile.
34  *
35  * For loops have the form:
36  *
37  *	.for <varname...> in <value...>
38  *	# the body
39  *	.endfor
40  *
41  * When a .for line is parsed, the following lines are copied to the body of
42  * the .for loop, until the corresponding .endfor line is reached.  In this
43  * phase, the body is not yet evaluated.  This also applies to any nested
44  * .for loops.
45  *
46  * After reaching the .endfor, the values from the .for line are grouped
47  * according to the number of variables.  For each such group, the unexpanded
48  * body is scanned for variable expressions, and those that match the
49  * variable names are replaced with expressions of the form ${:U...}.  After
50  * that, the body is treated like a file from an .include directive.
51  *
52  * Interface:
53  *	For_Eval	Evaluate the loop in the passed line.
54  *
55  *	For_Run		Run accumulated loop
56  */
57 
58 #include "make.h"
59 
60 /*	"@(#)for.c	8.1 (Berkeley) 6/6/93"	*/
61 MAKE_RCSID("$NetBSD: for.c,v 1.168 2022/06/12 16:09:21 rillig Exp $");
62 
63 
64 typedef struct ForLoop {
65 	Vector /* of 'char *' */ vars; /* Iteration variables */
66 	SubstringWords items;	/* Substitution items */
67 	Buffer body;		/* Unexpanded body of the loop */
68 	unsigned int nextItem;	/* Where to continue iterating */
69 } ForLoop;
70 
71 
72 static ForLoop *accumFor;	/* Loop being accumulated */
73 
74 
75 static ForLoop *
76 ForLoop_New(void)
77 {
78 	ForLoop *f = bmake_malloc(sizeof *f);
79 
80 	Vector_Init(&f->vars, sizeof(char *));
81 	SubstringWords_Init(&f->items);
82 	Buf_Init(&f->body);
83 	f->nextItem = 0;
84 
85 	return f;
86 }
87 
88 void
89 ForLoop_Free(ForLoop *f)
90 {
91 	while (f->vars.len > 0)
92 		free(*(char **)Vector_Pop(&f->vars));
93 	Vector_Done(&f->vars);
94 
95 	SubstringWords_Free(f->items);
96 	Buf_Done(&f->body);
97 
98 	free(f);
99 }
100 
101 char *
102 ForLoop_Details(ForLoop *f)
103 {
104 	size_t i, n;
105 	const char **vars;
106 	const Substring *items;
107 	Buffer buf;
108 
109 	n = f->vars.len;
110 	vars = f->vars.items;
111 	assert(f->nextItem >= n);
112 	items = f->items.words + f->nextItem - n;
113 
114 	Buf_Init(&buf);
115 	for (i = 0; i < n; i++) {
116 		if (i > 0)
117 			Buf_AddStr(&buf, ", ");
118 		Buf_AddStr(&buf, vars[i]);
119 		Buf_AddStr(&buf, " = ");
120 		Buf_AddBytesBetween(&buf, items[i].start, items[i].end);
121 	}
122 	return Buf_DoneData(&buf);
123 }
124 
125 static bool
126 ForLoop_ParseVarnames(ForLoop *f, const char **pp)
127 {
128 	const char *p = *pp;
129 
130 	for (;;) {
131 		size_t len;
132 
133 		cpp_skip_whitespace(&p);
134 		if (*p == '\0') {
135 			Parse_Error(PARSE_FATAL, "missing `in' in for");
136 			return false;
137 		}
138 
139 		/*
140 		 * XXX: This allows arbitrary variable names;
141 		 * see directive-for.mk.
142 		 */
143 		for (len = 1; p[len] != '\0' && !ch_isspace(p[len]); len++)
144 			continue;
145 
146 		if (len == 2 && p[0] == 'i' && p[1] == 'n') {
147 			p += 2;
148 			break;
149 		}
150 
151 		*(char **)Vector_Push(&f->vars) = bmake_strldup(p, len);
152 		p += len;
153 	}
154 
155 	if (f->vars.len == 0) {
156 		Parse_Error(PARSE_FATAL, "no iteration variables in for");
157 		return false;
158 	}
159 
160 	*pp = p;
161 	return true;
162 }
163 
164 static bool
165 ForLoop_ParseItems(ForLoop *f, const char *p)
166 {
167 	char *items;
168 
169 	cpp_skip_whitespace(&p);
170 
171 	if (Var_Subst(p, SCOPE_GLOBAL, VARE_WANTRES, &items) != VPR_OK) {
172 		Parse_Error(PARSE_FATAL, "Error in .for loop items");
173 		return false;
174 	}
175 
176 	f->items = Substring_Words(items, false);
177 	free(items);
178 
179 	if (f->items.len == 1 && Substring_IsEmpty(f->items.words[0]))
180 		f->items.len = 0;	/* .for var in ${:U} */
181 
182 	if (f->items.len % f->vars.len != 0) {
183 		Parse_Error(PARSE_FATAL,
184 		    "Wrong number of words (%u) in .for "
185 		    "substitution list with %u variables",
186 		    (unsigned)f->items.len, (unsigned)f->vars.len);
187 		return false;
188 	}
189 
190 	return true;
191 }
192 
193 static bool
194 IsFor(const char *p)
195 {
196 	return p[0] == 'f' && p[1] == 'o' && p[2] == 'r' && ch_isspace(p[3]);
197 }
198 
199 static bool
200 IsEndfor(const char *p)
201 {
202 	return p[0] == 'e' && strncmp(p, "endfor", 6) == 0 &&
203 	       (p[6] == '\0' || ch_isspace(p[6]));
204 }
205 
206 /*
207  * Evaluate the for loop in the passed line. The line looks like this:
208  *	.for <varname...> in <value...>
209  *
210  * Results:
211  *	0	not a .for directive
212  *	1	found a .for directive
213  *	-1	erroneous .for directive
214  */
215 int
216 For_Eval(const char *line)
217 {
218 	const char *p;
219 	ForLoop *f;
220 
221 	p = line + 1;		/* skip the '.' */
222 	cpp_skip_whitespace(&p);
223 
224 	if (IsFor(p)) {
225 		p += 3;
226 
227 		f = ForLoop_New();
228 		if (!ForLoop_ParseVarnames(f, &p)) {
229 			ForLoop_Free(f);
230 			return -1;
231 		}
232 		if (!ForLoop_ParseItems(f, p))
233 			f->items.len = 0;	/* don't iterate */
234 
235 		accumFor = f;
236 		return 1;
237 	} else if (IsEndfor(p)) {
238 		Parse_Error(PARSE_FATAL, "for-less endfor");
239 		return -1;
240 	} else
241 		return 0;
242 }
243 
244 /*
245  * Add another line to the .for loop that is being built up.
246  * Returns false when the matching .endfor is reached.
247  */
248 bool
249 For_Accum(const char *line, int *forLevel)
250 {
251 	const char *p = line;
252 
253 	if (*p == '.') {
254 		p++;
255 		cpp_skip_whitespace(&p);
256 
257 		if (IsEndfor(p)) {
258 			DEBUG1(FOR, "For: end for %d\n", *forLevel);
259 			if (--*forLevel == 0)
260 				return false;
261 		} else if (IsFor(p)) {
262 			(*forLevel)++;
263 			DEBUG1(FOR, "For: new loop %d\n", *forLevel);
264 		}
265 	}
266 
267 	Buf_AddStr(&accumFor->body, line);
268 	Buf_AddByte(&accumFor->body, '\n');
269 	return true;
270 }
271 
272 /*
273  * When the body of a '.for i' loop is prepared for an iteration, each
274  * occurrence of $i in the body is replaced with ${:U...}, inserting the
275  * value of the item.  If this item contains a '$', it may be the start of a
276  * variable expression.  This expression is copied verbatim, its length is
277  * determined here, in a rather naive way, ignoring escape characters and
278  * funny delimiters in modifiers like ':S}from}to}'.
279  */
280 static size_t
281 ExprLen(const char *s, const char *e)
282 {
283 	char expr_open, expr_close;
284 	int depth;
285 	const char *p;
286 
287 	if (s == e)
288 		return 0;	/* just escape the '$' */
289 
290 	expr_open = s[0];
291 	if (expr_open == '(')
292 		expr_close = ')';
293 	else if (expr_open == '{')
294 		expr_close = '}';
295 	else
296 		return 1;	/* Single char variable */
297 
298 	depth = 1;
299 	for (p = s + 1; p != e; p++) {
300 		if (*p == expr_open)
301 			depth++;
302 		else if (*p == expr_close && --depth == 0)
303 			return (size_t)(p + 1 - s);
304 	}
305 
306 	/* Expression end not found, escape the $ */
307 	return 0;
308 }
309 
310 /*
311  * The .for loop substitutes the items as ${:U<value>...}, which means
312  * that characters that break this syntax must be backslash-escaped.
313  */
314 static bool
315 NeedsEscapes(Substring value, char endc)
316 {
317 	const char *p;
318 
319 	for (p = value.start; p != value.end; p++) {
320 		if (*p == ':' || *p == '$' || *p == '\\' || *p == endc ||
321 		    *p == '\n')
322 			return true;
323 	}
324 	return false;
325 }
326 
327 /*
328  * While expanding the body of a .for loop, write the item in the ${:U...}
329  * expression, escaping characters as needed.  The result is later unescaped
330  * by ApplyModifier_Defined.
331  */
332 static void
333 AddEscaped(Buffer *cmds, Substring item, char endc)
334 {
335 	const char *p;
336 	char ch;
337 
338 	if (!NeedsEscapes(item, endc)) {
339 		Buf_AddBytesBetween(cmds, item.start, item.end);
340 		return;
341 	}
342 
343 	for (p = item.start; p != item.end;) {
344 		ch = *p;
345 		if (ch == '$') {
346 			size_t len = ExprLen(p + 1, item.end);
347 			if (len != 0) {
348 				/*
349 				 * XXX: Should a '\' be added here?
350 				 * See directive-for-escape.mk, ExprLen.
351 				 */
352 				Buf_AddBytes(cmds, p, 1 + len);
353 				p += 1 + len;
354 				continue;
355 			}
356 			Buf_AddByte(cmds, '\\');
357 		} else if (ch == ':' || ch == '\\' || ch == endc)
358 			Buf_AddByte(cmds, '\\');
359 		else if (ch == '\n') {
360 			Parse_Error(PARSE_FATAL, "newline in .for value");
361 			ch = ' ';	/* prevent newline injection */
362 		}
363 		Buf_AddByte(cmds, ch);
364 		p++;
365 	}
366 }
367 
368 /*
369  * When expanding the body of a .for loop, replace the variable name of an
370  * expression like ${i} or ${i:...} or $(i) or $(i:...) with ":Uvalue".
371  */
372 static void
373 ForLoop_SubstVarLong(ForLoop *f, unsigned int firstItem, Buffer *body,
374 		     const char **pp, char endc, const char **inout_mark)
375 {
376 	size_t i;
377 	const char *start = *pp;
378 	const char **vars = Vector_Get(&f->vars, 0);
379 
380 	for (i = 0; i < f->vars.len; i++) {
381 		const char *p = start;
382 
383 		if (!cpp_skip_string(&p, vars[i]))
384 			continue;
385 		/* XXX: why test for backslash here? */
386 		if (*p != ':' && *p != endc && *p != '\\')
387 			continue;
388 
389 		/*
390 		 * Found a variable match.  Skip over the variable name and
391 		 * instead add ':U<value>' to the current body.
392 		 */
393 		Buf_AddBytesBetween(body, *inout_mark, start);
394 		Buf_AddStr(body, ":U");
395 		AddEscaped(body, f->items.words[firstItem + i], endc);
396 
397 		*inout_mark = p;
398 		*pp = p;
399 		return;
400 	}
401 }
402 
403 /*
404  * When expanding the body of a .for loop, replace single-character
405  * variable expressions like $i with their ${:U...} expansion.
406  */
407 static void
408 ForLoop_SubstVarShort(ForLoop *f, unsigned int firstItem, Buffer *body,
409 		      const char *p, const char **inout_mark)
410 {
411 	const char ch = *p;
412 	const char **vars;
413 	size_t i;
414 
415 	/* Skip $$ and stupid ones. */
416 	if (ch == '}' || ch == ')' || ch == ':' || ch == '$')
417 		return;
418 
419 	vars = Vector_Get(&f->vars, 0);
420 	for (i = 0; i < f->vars.len; i++) {
421 		const char *varname = vars[i];
422 		if (varname[0] == ch && varname[1] == '\0')
423 			goto found;
424 	}
425 	return;
426 
427 found:
428 	Buf_AddBytesBetween(body, *inout_mark, p);
429 	*inout_mark = p + 1;
430 
431 	/* Replace $<ch> with ${:U<value>} */
432 	Buf_AddStr(body, "{:U");
433 	AddEscaped(body, f->items.words[firstItem + i], '}');
434 	Buf_AddByte(body, '}');
435 }
436 
437 /*
438  * Compute the body for the current iteration by copying the unexpanded body,
439  * replacing the expressions for the iteration variables on the way.
440  *
441  * Using variable expressions ensures that the .for loop can't generate
442  * syntax, and that the later parsing will still see a variable.
443  * This code assumes that the variable with the empty name will never be
444  * defined, see unit-tests/varname-empty.mk for more details.
445  *
446  * The detection of substitutions of the loop control variables is naive.
447  * Many of the modifiers use '\$' instead of '$$' to escape '$', so it is
448  * possible to contrive a makefile where an unwanted substitution happens.
449  */
450 static void
451 ForLoop_SubstBody(ForLoop *f, unsigned int firstItem, Buffer *body)
452 {
453 	const char *p, *end;
454 	const char *mark;	/* where the last substitution left off */
455 
456 	Buf_Clear(body);
457 
458 	mark = f->body.data;
459 	end = f->body.data + f->body.len;
460 	for (p = mark; (p = strchr(p, '$')) != NULL;) {
461 		if (p[1] == '{' || p[1] == '(') {
462 			char endc = p[1] == '{' ? '}' : ')';
463 			p += 2;
464 			ForLoop_SubstVarLong(f, firstItem, body,
465 			    &p, endc, &mark);
466 		} else if (p[1] != '\0') {
467 			ForLoop_SubstVarShort(f, firstItem, body,
468 			    p + 1, &mark);
469 			p += 2;
470 		} else
471 			break;
472 	}
473 
474 	Buf_AddBytesBetween(body, mark, end);
475 }
476 
477 /*
478  * Compute the body for the current iteration by copying the unexpanded body,
479  * replacing the expressions for the iteration variables on the way.
480  */
481 bool
482 For_NextIteration(ForLoop *f, Buffer *body)
483 {
484 	if (f->nextItem == f->items.len)
485 		return false;
486 
487 	f->nextItem += (unsigned int)f->vars.len;
488 	ForLoop_SubstBody(f, f->nextItem - (unsigned int)f->vars.len, body);
489 	DEBUG1(FOR, "For: loop body:\n%s", body->data);
490 	return true;
491 }
492 
493 /* Run the .for loop, imitating the actions of an include file. */
494 void
495 For_Run(unsigned headLineno, unsigned bodyReadLines)
496 {
497 	Buffer buf;
498 	ForLoop *f = accumFor;
499 	accumFor = NULL;
500 
501 	if (f->items.len > 0) {
502 		Buf_Init(&buf);
503 		Parse_PushInput(NULL, headLineno, bodyReadLines, buf, f);
504 	} else
505 		ForLoop_Free(f);
506 }
507