1: 2# NAME: 3# boot-strap 4# 5# SYNOPSIS: 6# boot-strap ["options"] 7# boot-strap --prefix=/opt --install 8# boot-strap --prefix=$HOME --install-host-target -DWITH_PROG_VERSION 9# boot-strap ["options"] op=build 10# boot-strap ["options"] op=install 11# 12# DESCRIPTION: 13# This script is used to configure/build bmake it builds for 14# each host-target in a different subdir to keep the src clean. 15# There is no requirement for an existing make(1). 16# 17# On successful completion if no '--install' flag is given, 18# it echos a command to do installation. 19# 20# The variable "op" defaults to 'all', and is affected by 21# '--install' flag as above. 22# Other values include: 23# 24# configure 25# Just run 'configure' 26# 27# build 28# If 'configure' has not been done, do it, then 29# run the build script, and finally 'test'. 30# 31# install 32# If 'build' has not been done, do it, 'test' then 33# install. 34# 35# clean 36# attempt to clean up 37# 38# test 39# run the unit-tests. Done automatically after 'build' 40# and before 'install'. 41# 42# The above are leveraged by a trivial makefile for the benefit 43# of those that have './configure; make; make install' baked 44# into them. 45# 46# Options: 47# 48# -c "rc" 49# Pick up settings from "rc". 50# We look for '.bmake-boot-strap.rc' before processing 51# options (unless SKIP_RC is set in environment). 52# 53# --share "share_dir" 54# Where to put man pages and mk files. 55# If $prefix ends in $HOST_TARGET, and $prefix/../share 56# exits, the default will be that rather than $prefix/share. 57# 58# --mksrc "mksrc" 59# Indicate where the mk files can be found. 60# Default is $Mydir/mk 61# 62# --install 63# If build and test work, run bmake install. 64# BINDIR=$prefix/bin 65# SHAREDIR=$prefix/share 66# 67# --install-host-target 68# As for '--install' but BINDIR=$prefix/$HOST_TARGET/bin 69# This is useful when $prefix/ is shared by multiple 70# machines. 71# 72# Flags relevant when installing: 73# 74# -DWITHOUT_INSTALL_MK 75# Skip installing mk files. 76# By default they will be installed to $prefix/share/mk 77# 78# -DWITH_PROG_VERSION 79# Install 'bmake' as 'bmake-$MAKE_VERSION' 80# A symlink will be made as 'bmake' unless 81# -DWITHOUT_PROG_LINK is set. 82# 83# Possibly useful configure_args: 84# 85# --without-meta 86# disable use of meta mode. 87# 88# --without-filemon 89# disable use of filemon(9) which is currently only 90# available for NetBSD and FreeBSD. 91# 92# --with-filemon="path/to/filemon.h" 93# enables use of filemon(9) by meta mode. 94# 95# --with-machine="machine" 96# set "machine" to override that determined by 97# machine.sh 98# 99# --with-force-machine="machine" 100# force "machine" even if uname(3) provides a value. 101# 102# --with-machine_arch="machine_arch" 103# set "machine_arch" to override that determined by 104# machine.sh 105# 106# --with-default-sys-path="syspath" 107# set an explicit default "syspath" which is where bmake 108# will look for sys.mk and friends. 109# 110# AUTHOR: 111# Simon J. Gerraty <sjg@crufty.net> 112 113# RCSid: 114# $Id: boot-strap,v 1.49 2016/05/29 00:09:14 sjg Exp $ 115# 116# @(#) Copyright (c) 2001 Simon J. Gerraty 117# 118# This file is provided in the hope that it will 119# be of use. There is absolutely NO WARRANTY. 120# Permission to copy, redistribute or otherwise 121# use this file is hereby granted provided that 122# the above copyright notice and this notice are 123# left intact. 124# 125# Please send copies of changes and bug-fixes to: 126# sjg@crufty.net 127# 128 129Mydir=`dirname $0` 130. "$Mydir/os.sh" 131case "$Mydir" in 132/*) ;; 133*) Mydir=`cd "$Mydir" && 'pwd'`;; 134esac 135 136Usage() { 137 [ "$1" ] && echo "ERROR: $@" >&2 138 echo "Usage:" >&2 139 echo "$0 [--<configure_arg> ...][<prefix>][--install]" >&2 140 exit 1 141} 142 143Error() { 144 echo "ERROR: $@" >&2 145 exit 1 146} 147 148source_rc() { 149 rc="$1"; shift 150 for d in ${*:-""} 151 do 152 r="${d:+$d/}$rc" 153 [ -f "$r" -a -s "$r" ] || continue 154 echo "NOTE: reading $r" 155 . "$r" 156 break 157 done 158} 159 160cmd_args="$@" 161 162# clear some things from the environment that we care about 163unset MAKEOBJDIR MAKEOBJDIRPREFIX 164 165# --install[-host-target] will set this 166INSTALL_PREFIX= 167# other things we pass to install step 168INSTALL_ARGS= 169CONFIGURE_ARGS= 170MAKESYSPATH= 171# pick a useful default prefix (for me at least ;-) 172for prefix in /opt/$HOST_TARGET "$HOME/$HOST_TARGET" /usr/pkg /usr/local "" 173do 174 [ -d "${prefix:-.}" ] || continue 175 case "$prefix" in 176 */$HOST_TARGET) 177 p=`dirname $prefix` 178 if [ -d $p/share ]; then 179 INSTALL_BIN=$HOST_TARGET/bin 180 prefix=$p 181 fi 182 ;; 183 esac 184 echo "NOTE: default prefix=$prefix ${INSTALL_BIN:+INSTALL_BIN=$INSTALL_BIN}" 185 break 186done 187srcdir=$Mydir 188mksrc=$Mydir/mk 189objdir= 190quiet=: 191 192${SKIP_RC:+:} source_rc .bmake-boot-strap.rc . "$Mydir/.." "$HOME" 193 194get_optarg() { 195 expr "x$1" : "x[^=]*=\\(.*\\)" 196} 197 198here=`'pwd'` 199if [ $here = $Mydir ]; then 200 # avoid pollution 201 OBJROOT=../ 202fi 203 204op=all 205BMAKE= 206 207while : 208do 209 case "$1" in 210 --) shift; break;; 211 --help) sed -n -e "1d;/RCSid/,\$d" -e '/^#\.[a-z]/d' -e '/^#/s,^# *,,p' $0; exit 0;; 212 --prefix) prefix="$2"; shift;; 213 --prefix=*) prefix=`get_optarg "$1"`;; 214 --src=*) srcdir=`get_optarg "$1"`;; 215 --with-mksrc=*|--mksrc=*) mksrc=`get_optarg "$1"`;; 216 --share=*) share_dir=`get_optarg "$1"`;; 217 --share) share_dir="$2"; shift;; 218 --with-default-sys-path=*) 219 CONFIGURE_ARGS="$1";; 220 --with-default-sys-path) 221 CONFIGURE_ARGS="$1 $2";; 222 --install) INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix};; 223 --install-host-target) 224 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 225 INSTALL_BIN=$HOST_TARGET/bin;; 226 --install-destdir=*) INSTALL_DESTDIR=`get_optarg "$1"`;; 227 --install-prefix=*) INSTALL_PREFIX=`get_optarg "$1"`;; 228 -DWITH*) INSTALL_ARGS="$INSTALL_ARGS $1";; 229 -s|--src) srcdir="$2"; shift;; 230 -m|--mksrc) mksrc="$2"; shift;; 231 -o|--objdir) objdir="$2"; shift;; 232 -q) quiet=;; 233 -c) source_rc "$2"; shift;; 234 --*) CONFIGURE_ARGS="$CONFIGURE_ARGS $1";; 235 *=*) eval "$1"; export `expr "x$1" : "x\\(.[^=]*\\)=.*"`;; 236 *) break;; 237 esac 238 shift 239done 240 241AddConfigure() { 242 case " $CONFIGURE_ARGS " in 243 *" $1"*) ;; 244 *) CONFIGURE_ARGS="$CONFIGURE_ARGS $1$2";; 245 esac 246} 247 248GetDir() { 249 match="$1" 250 shift 251 fmatch="$1" 252 shift 253 for dir in $* 254 do 255 [ -d "$dir" ] || continue 256 case "/$dir/" in 257 *$match*) ;; 258 *) continue;; 259 esac 260 case "$fmatch" in 261 .) ;; 262 *) [ -s $dir/$fmatch ] || continue;; 263 esac 264 case "$dir/" in 265 *./*) cd "$dir" && 'pwd';; 266 /*) echo $dir;; 267 *) cd "$dir" && 'pwd';; 268 esac 269 break 270 done 271} 272 273FindHereOrAbove() { 274 ( 275 _t=-s 276 while : 277 do 278 case "$1" in 279 -C) cd "$2"; shift; shift;; 280 -?) _t=$1; shift;; 281 *) break;; 282 esac 283 done 284 case "$1" in 285 /*) # we shouldn't be here 286 [ $_t "$1" ] && echo "$1" 287 return 288 ;; 289 .../*) want=`echo "$1" | sed 's,^.../*,,'`;; 290 *) want="$1";; 291 esac 292 here=`'pwd'` 293 while : 294 do 295 if [ $_t "./$want" ]; then 296 echo "$here/$want" 297 return 298 fi 299 cd .. 300 here=`'pwd'` 301 case "$here" in 302 /) return;; 303 esac 304 done 305 ) 306} 307 308# is $1 missing from $2 (or PATH) ? 309no_path() { 310 eval "__p=\$${2:-PATH}" 311 case ":$__p:" in *:"$1":*) return 1;; *) return 0;; esac 312} 313 314# if $1 exists and is not in path, append it 315add_path () { 316 case "$1" in 317 -?) t=$1; shift;; 318 *) t=-d;; 319 esac 320 case "$2,$1" in 321 MAKESYSPATH,.../*) ;; 322 *) [ $t ${1:-.} ] || return;; 323 esac 324 no_path $* && eval ${2:-PATH}="$__p${__p:+:}$1" 325} 326 327 328srcdir=`GetDir /bmake make-bootstrap.sh.in "$srcdir" "$2" "$Mydir" ./bmake* "$Mydir"/../bmake*` 329[ -d "${srcdir:-/dev/null}" ] || Usage 330case "$mksrc" in 331none|-) # we ignore this now 332 mksrc=$Mydir/mk 333 ;; 334.../*) # find here or above 335 mksrc=`FindHereOrAbove -C "$Mydir" -s "$mksrc/sys.mk"` 336 # that found a file 337 mksrc=`dirname $mksrc` 338 ;; 339*) # guess we want mksrc... 340 mksrc=`GetDir /mk sys.mk "$mksrc" "$3" ./mk* "$srcdir"/mk* "$srcdir"/../mk*` 341 [ -d "${mksrc:-/dev/null}" ] || Usage "Use '-m none' to build without mksrc" 342 ;; 343esac 344 345# Ok, get to work... 346objdir="${objdir:-$OBJROOT$HOST_TARGET}" 347[ -d "$objdir" ] || mkdir -p "$objdir" 348[ -d "$objdir" ] || mkdir "$objdir" 349cd "$objdir" || exit 1 350# make it absolute 351objdir=`'pwd'` 352 353ShareDir() { 354 case "/$1" in 355 /) [ -d /share ] || return;; 356 */$HOST_TARGET) 357 if [ -d "$1/../share" ]; then 358 echo `dirname "$1"`/share 359 return 360 fi 361 ;; 362 esac 363 echo $1/share 364} 365 366# make it easy to force prefix to use $HOST_TARGET 367: looking at "$prefix" 368case "$prefix" in 369*/host?target) prefix=`echo "$prefix" | sed "s,host.target,${HOST_TARGET},"`;; 370esac 371 372share_dir="${share_dir:-`ShareDir $prefix`}" 373 374AddConfigure --prefix= "$prefix" 375case "$CONFIGURE_ARGS" in 376*--with-*-sys-path*) ;; # skip 377*) [ "$share_dir" ] && AddConfigure --with-default-sys-path= "$share_dir/mk";; 378esac 379if [ "$mksrc" ]; then 380 AddConfigure --with-mksrc= "$mksrc" 381 # not all cc's support this 382 CFLAGS_MF= CFLAGS_MD= 383 export CFLAGS_MF CFLAGS_MD 384fi 385 386# this makes it easy to run the bmake we just built 387# the :tA dance is needed because 'pwd' and even /bin/pwd 388# may not give the same result as realpath(). 389Bmake() { 390 ( 391 cd $Mydir && 392 MAKESYSPATH=$mksrc SRCTOP=$Mydir OBJTOP=$objdir \ 393 MAKEOBJDIR='${.CURDIR:S,${SRCTOP:tA},${OBJTOP:tA},}' \ 394 ${BMAKE:-$objdir/bmake} -f $Mydir/Makefile "$@" 395 ) 396} 397 398# there is actually a shell where type is not a builtin 399# if type is missing, which(1) had better exists! 400if (type cat) > /dev/null 2>&1; then 401which() { 402 type "$@" | sed 's,[()],,g;s,^[^/][^/]*,,;q' 403} 404fi 405# make sure test below uses the same diff that configure did 406TOOL_DIFF=`which diff` 407export TOOL_DIFF 408 409op_configure() { 410 $srcdir/configure $CONFIGURE_ARGS || exit 1 411} 412 413op_build() { 414 [ -s make-bootstrap.sh ] || op_configure 415 chmod 755 make-bootstrap.sh || exit 1 416 ./make-bootstrap.sh || exit 1 417 case "$op" in 418 build) op_test;; 419 esac 420} 421 422op_test() { 423 [ -x bmake ] || op_build 424 Bmake test || exit 1 425} 426 427op_clean() { 428 if [ -x bmake ]; then 429 ln bmake bmake$$ 430 BMAKE=$objdir/bmake$$ Bmake clean 431 rm -f bmake$$ 432 elif [ $objdir != $srcdir ]; then 433 rm -rf * 434 fi 435} 436 437op_install() { 438 op_test 439 case "$INSTALL_PREFIX,$INSTALL_BIN,$prefix" in 440 ,$HOST_TARGET/bin,*/$HOST_TARGET) 441 INSTALL_PREFIX=`dirname $prefix` 442 ;; 443 esac 444 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 445 Bmake install prefix=$INSTALL_PREFIX BINDIR=$INSTALL_PREFIX/${INSTALL_BIN:-bin} ${INSTALL_DESTDIR:+DESTDIR=$INSTALL_DESTDIR} $INSTALL_ARGS || exit 1 446} 447 448op_all() { 449 rm -f make-bootstrap.sh bmake *.o 450 if [ -n "$INSTALL_PREFIX" ]; then 451 op_install 452 else 453 op_test 454 MAKE_VERSION=`sed -n '/^_MAKE_VERSION/ { s,.*= *,,;p; }' $srcdir/Makefile` 455 echo You can install by running: 456 echo 457 echo $0 $cmd_args op=install 458 echo 459 echo "Use --install-prefix=/something to install somewhere other than $prefix" 460 echo "Use --install-destdir=/somewhere to set DESTDIR during install" 461 echo "Use --install-host-target to use INSTALL_BIN=$HOST_TARGET/bin" 462 echo "Use -DWITH_PROG_VERSION to install as bmake-$MAKE_VERSION" 463 echo "Use -DWITHOUT_PROG_LINK to suppress bmake -> bmake-$MAKE_VERSION symlink" 464 echo "Use -DWITHOUT_INSTALL_MK to skip installing files to $prefix/share/mk" 465 fi 466} 467 468op_$op 469exit 0 470