1: 2# NAME: 3# boot-strap 4# 5# SYNOPSIS: 6# boot-strap ["options"] 7# boot-strap --prefix=/opt --install 8# boot-strap --prefix=$HOME --install-host-target -DWITH_PROG_VERSION 9# boot-strap ["options"] op=build 10# boot-strap ["options"] op=install 11# 12# DESCRIPTION: 13# This script is used to configure/build bmake it builds for 14# each host-target in a different subdir to keep the src clean. 15# There is no requirement for an existing make(1). 16# 17# On successful completion if no '--install' flag is given, 18# it echos a command to do installation. 19# 20# The variable "op" defaults to 'all', and is affected by 21# '--install' flag as above. 22# Other values include: 23# 24# configure 25# Just run 'configure' 26# 27# build 28# If 'configure' has not been done, do it, then 29# run the build script, and finally 'test'. 30# 31# install 32# If 'build' has not been done, do it, 'test' then 33# install. 34# 35# clean 36# attempt to clean up 37# 38# test 39# run the unit-tests. Done automatically after 'build' 40# and before 'install'. 41# 42# The above are leveraged by a trivial makefile for the benefit 43# of those that have './configure; make; make install' baked 44# into them. 45# 46# Options: 47# 48# -c "rc" 49# Pick up settings from "rc". 50# We look for '.bmake-boot-strap.rc' before processing 51# options (unless SKIP_RC is set in environment). 52# 53# --share "share_dir" 54# Where to put man pages and mk files. 55# If $prefix ends in $HOST_TARGET, and $prefix/../share 56# exits, the default will be that rather than $prefix/share. 57# 58# --mksrc "mksrc" 59# Indicate where the mk files can be found. 60# Default is $Mydir/mk 61# 62# --install 63# If build and test work, run bmake install. 64# BINDIR=$prefix/bin 65# SHAREDIR=$prefix/share 66# 67# --install-host-target 68# As for '--install' but BINDIR=$prefix/$HOST_TARGET/bin 69# This is useful when $prefix/ is shared by multiple 70# machines. 71# 72# Flags relevant when installing: 73# 74# -DWITHOUT_INSTALL_MK 75# Skip installing mk files. 76# By default they will be installed to $prefix/share/mk 77# 78# -DWITH_PROG_VERSION 79# Install 'bmake' as 'bmake-$MAKE_VERSION' 80# A symlink will be made as 'bmake' unless 81# -DWITHOUT_PROG_LINK is set. 82# 83# Possibly useful configure_args: 84# 85# --without-makefile 86# do not generate 'makefile'. 87# 88# 'makefile' is used to enable the classic 89# './configure; make; make install' dance, but on 90# systems with case insensitive filesystems it can lead 91# to infinite recursion. 92# 93# It is disabled by default on Darwin, and Cygwin. 94# 95# --without-meta 96# disable use of meta mode. 97# 98# Even without filemon(9) meta mode is very useful 99# both for debugging build and improving reliability of 100# update builds. 101# 102# --without-filemon 103# disable use of filemon(9) which is currently only 104# available for NetBSD and FreeBSD. 105# 106# --with-filemon=ktrace 107# on NetBSD or others with fktrace(2), use ktrace 108# version of filemon. 109# 110# --with-filemon="path/to/filemon.h" 111# enables use of filemon(9) by meta mode. 112# 113# --with-machine="machine" 114# set "machine" to override that determined by 115# machine.sh 116# 117# --with-force-machine="machine" 118# force "machine" even if uname(3) provides a value. 119# 120# --with-machine_arch="machine_arch" 121# set "machine_arch" to override that determined by 122# machine.sh 123# 124# --with-force_machine_arch="machine_arch" 125# force "machine_arch" to override that determined by 126# machine.sh 127# 128# --with-default-sys-path="syspath" 129# set an explicit default "syspath" which is where bmake 130# will look for sys.mk and friends. 131# 132# AUTHOR: 133# Simon J. Gerraty <sjg@crufty.net> 134 135# RCSid: 136# $Id: boot-strap,v 1.61 2024/03/10 17:51:10 sjg Exp $ 137# 138# @(#) Copyright (c) 2001 Simon J. Gerraty 139# 140# This file is provided in the hope that it will 141# be of use. There is absolutely NO WARRANTY. 142# Permission to copy, redistribute or otherwise 143# use this file is hereby granted provided that 144# the above copyright notice and this notice are 145# left intact. 146# 147# Please send copies of changes and bug-fixes to: 148# sjg@crufty.net 149# 150 151Mydir=`dirname $0` 152. "$Mydir/os.sh" 153case "$Mydir" in 154/*) ;; 155*) Mydir=`cd "$Mydir" && 'pwd'`;; 156esac 157 158Usage() { 159 [ "$1" ] && echo "ERROR: $@" >&2 160 echo "Usage:" >&2 161 echo "$0 [--<configure_arg> ...][<prefix>][--install]" >&2 162 exit 1 163} 164 165Error() { 166 echo "ERROR: $@" >&2 167 exit 1 168} 169 170source_rc() { 171 rc="$1"; shift 172 for d in ${*:-""} 173 do 174 r="${d:+$d/}$rc" 175 [ -f "$r" -a -s "$r" ] || continue 176 echo "NOTE: reading $r" 177 . "$r" 178 break 179 done 180} 181 182cmd_args="$@" 183 184# clear some things from the environment that we care about 185unset MAKEOBJDIR MAKEOBJDIRPREFIX 186# or that might be incompatible 187unset MAKE MAKEFLAGS 188 189# --install[-host-target] will set this 190INSTALL_PREFIX= 191# other things we pass to install step 192INSTALL_ARGS= 193CONFIGURE_ARGS= 194MAKESYSPATH= 195# pick a useful default prefix (for me at least ;-) 196for prefix in /opt/$HOST_TARGET "$HOME/$HOST_TARGET" /usr/pkg /usr/local "" 197do 198 [ -d "${prefix:-.}" ] || continue 199 case "$prefix" in 200 */$HOST_TARGET) 201 p=`dirname $prefix` 202 if [ -d $p/share ]; then 203 INSTALL_BIN=$HOST_TARGET/bin 204 prefix=$p 205 fi 206 ;; 207 esac 208 echo "NOTE: default prefix=$prefix ${INSTALL_BIN:+INSTALL_BIN=$INSTALL_BIN}" 209 break 210done 211srcdir=$Mydir 212mksrc=$Mydir/mk 213objdir= 214quiet=: 215 216${SKIP_RC:+:} source_rc .bmake-boot-strap.rc . "$Mydir/.." "$HOME" 217 218get_optarg() { 219 expr "x$1" : "x[^=]*=\\(.*\\)" 220} 221 222here=`'pwd'` 223if [ $here = $Mydir ]; then 224 # avoid pollution 225 OBJROOT=../ 226fi 227 228op=all 229BMAKE= 230 231while : 232do 233 case "$1" in 234 --) shift; break;; 235 --help) sed -n -e "1d;/RCSid/,\$d" -e '/^#\.[a-z]/d' -e '/^#/s,^# *,,p' $0; exit 0;; 236 --prefix) prefix="$2"; shift;; 237 --prefix=*) prefix=`get_optarg "$1"`;; 238 --src=*) srcdir=`get_optarg "$1"`;; 239 --with-mksrc=*|--mksrc=*) mksrc=`get_optarg "$1"`;; 240 --share=*) share_dir=`get_optarg "$1"`;; 241 --share) share_dir="$2"; shift;; 242 --with-default-sys-path=*) 243 CONFIGURE_ARGS="$1";; 244 --with-default-sys-path) 245 CONFIGURE_ARGS="$1 $2";; 246 --install) INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix};; 247 --install-host-target) 248 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 249 INSTALL_BIN=$HOST_TARGET/bin;; 250 --install-destdir=*) INSTALL_DESTDIR=`get_optarg "$1"`;; 251 --install-prefix=*) INSTALL_PREFIX=`get_optarg "$1"`;; 252 -DWITH*) INSTALL_ARGS="$INSTALL_ARGS $1";; 253 -s|--src) srcdir="$2"; shift;; 254 -m|--mksrc) mksrc="$2"; shift;; 255 -o|--objdir) objdir="$2"; shift;; 256 -q) quiet=;; 257 -c) source_rc "$2"; shift;; 258 --*) CONFIGURE_ARGS="$CONFIGURE_ARGS $1";; 259 *=*) eval "$1"; export `expr "x$1" : "x\\(.[^=]*\\)=.*"`;; 260 *) break;; 261 esac 262 shift 263done 264 265AddConfigure() { 266 case " $CONFIGURE_ARGS " in 267 *" $1"*) ;; 268 *) CONFIGURE_ARGS="$CONFIGURE_ARGS $1$2";; 269 esac 270} 271 272GetDir() { 273 match="$1" 274 shift 275 fmatch="$1" 276 shift 277 for dir in $* 278 do 279 [ -d "$dir" ] || continue 280 case "/$dir/" in 281 *$match*) ;; 282 *) continue;; 283 esac 284 case "$fmatch" in 285 .) ;; 286 *) [ -s $dir/$fmatch ] || continue;; 287 esac 288 case "$dir/" in 289 *./*) cd "$dir" && 'pwd';; 290 /*) echo $dir;; 291 *) cd "$dir" && 'pwd';; 292 esac 293 break 294 done 295} 296 297FindHereOrAbove() { 298 ( 299 _t=-s 300 while : 301 do 302 case "$1" in 303 -C) cd "$2"; shift; shift;; 304 -?) _t=$1; shift;; 305 *) break;; 306 esac 307 done 308 case "$1" in 309 /*) # we shouldn't be here 310 [ $_t "$1" ] && echo "$1" 311 return 312 ;; 313 .../*) want=`echo "$1" | sed 's,^.../*,,'`;; 314 *) want="$1";; 315 esac 316 here=`'pwd'` 317 while : 318 do 319 if [ $_t "./$want" ]; then 320 echo "$here/$want" 321 return 322 fi 323 cd .. 324 here=`'pwd'` 325 case "$here" in 326 /) return;; 327 esac 328 done 329 ) 330} 331 332# is $1 newer than $2 ... 333is_newer() { 334 case `'ls' -1td "$@" 2> /dev/null | head -1` in 335 $1) return 0;; 336 esac 337 return 1 338} 339 340# is $1 missing from $2 (or PATH) ? 341no_path() { 342 eval "__p=\$${2:-PATH}" 343 case ":$__p:" in *:"$1":*) return 1;; *) return 0;; esac 344} 345 346# if $1 exists and is not in path, append it 347add_path () { 348 case "$1" in 349 -?) t=$1; shift;; 350 *) t=-d;; 351 esac 352 case "$2,$1" in 353 MAKESYSPATH,.../*) ;; 354 *) [ $t ${1:-.} ] || return;; 355 esac 356 no_path $* && eval ${2:-PATH}="$__p${__p:+:}$1" 357} 358 359 360srcdir=`GetDir /bmake make-bootstrap.sh.in "$srcdir" "$2" "$Mydir" ./bmake* "$Mydir"/../bmake*` 361[ -d "${srcdir:-/dev/null}" ] || Usage 362case "$mksrc" in 363none|-) # we ignore this now 364 mksrc=$Mydir/mk 365 ;; 366.../*) # find here or above 367 mksrc=`FindHereOrAbove -C "$Mydir" -s "$mksrc/sys.mk"` 368 # that found a file 369 mksrc=`dirname $mksrc` 370 ;; 371*) # guess we want mksrc... 372 mksrc=`GetDir /mk sys.mk "$mksrc" "$3" ./mk* "$srcdir"/mk* "$srcdir"/../mk*` 373 [ -d "${mksrc:-/dev/null}" ] || Usage "Use '-m none' to build without mksrc" 374 ;; 375esac 376 377# Ok, get to work... 378objdir="${objdir:-$OBJROOT$HOST_TARGET}" 379[ -d "$objdir" ] || mkdir -p "$objdir" 380[ -d "$objdir" ] || mkdir "$objdir" 381cd "$objdir" || exit 1 382# make it absolute 383objdir=`'pwd'` 384 385ShareDir() { 386 case "/$1" in 387 /) [ -d /share ] || return;; 388 */$HOST_TARGET) 389 if [ -d "$1/../share" ]; then 390 echo `dirname "$1"`/share 391 return 392 fi 393 ;; 394 esac 395 echo $1/share 396} 397 398# make it easy to force prefix to use $HOST_TARGET 399: looking at "$prefix" 400case "$prefix" in 401*/host?target) prefix=`echo "$prefix" | sed "s,host.target,${HOST_TARGET},"`;; 402esac 403 404share_dir="${share_dir:-`ShareDir $prefix`}" 405 406AddConfigure --prefix= "$prefix" 407case "$CONFIGURE_ARGS" in 408*--with-*-sys-path*) ;; # skip 409*) [ "$share_dir" ] && AddConfigure --with-default-sys-path= "$share_dir/mk";; 410esac 411if [ "$mksrc" ]; then 412 AddConfigure --with-mksrc= "$mksrc" 413 # not all cc's support this 414 CFLAGS_MF= CFLAGS_MD= 415 export CFLAGS_MF CFLAGS_MD 416fi 417 418# this makes it easy to run the bmake we just built 419# the :tA dance is needed because 'pwd' and even /bin/pwd 420# may not give the same result as realpath(). 421Bmake() { 422 ( 423 cd $Mydir && 424 MAKESYSPATH=$mksrc SRCTOP=$Mydir OBJTOP=$objdir \ 425 MAKEOBJDIR='${.CURDIR:S,${SRCTOP:tA},${OBJTOP:tA},}' \ 426 ${BMAKE:-$objdir/bmake} -f $Mydir/Makefile "$@" 427 ) 428} 429 430op_configure() { 431 $srcdir/configure $CONFIGURE_ARGS || exit 1 432} 433 434op_build() { 435 [ -s make-bootstrap.sh ] || op_configure 436 chmod 755 make-bootstrap.sh || exit 1 437 ./make-bootstrap.sh || exit 1 438 case "$op" in 439 build) rm -f tested; op_test;; 440 esac 441} 442 443op_test() { 444 [ -x bmake ] || op_build 445 case "$op" in 446 test) ;; 447 *) is_newer bmake tested || return;; 448 esac 449 Bmake test TEST_MAKE=$objdir/bmake "$@" || exit 1 450 touch tested 451} 452 453op_clean() { 454 if [ -x bmake ]; then 455 ln bmake bmake$$ 456 BMAKE=$objdir/bmake$$ Bmake clean 457 rm -f bmake$$ 458 elif [ $objdir != $srcdir ]; then 459 rm -rf * 460 fi 461} 462 463op_install() { 464 op_test 465 case "$INSTALL_PREFIX,$INSTALL_BIN,$prefix" in 466 ,$HOST_TARGET/bin,*/$HOST_TARGET) 467 INSTALL_PREFIX=`dirname $prefix` 468 ;; 469 esac 470 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 471 Bmake install prefix=$INSTALL_PREFIX BINDIR=$INSTALL_PREFIX/${INSTALL_BIN:-bin} ${INSTALL_DESTDIR:+DESTDIR=$INSTALL_DESTDIR} $INSTALL_ARGS || exit 1 472} 473 474op_all() { 475 rm -f make-bootstrap.sh bmake *.o 476 if [ -n "$INSTALL_PREFIX" ]; then 477 op_install 478 else 479 op_test 480 MAKE_VERSION=`sed -n '/^_MAKE_VERSION/ { s,.*= *,,;p; }' $srcdir/Makefile` 481 cat << EOM 482You can install by running: 483 484$0 $cmd_args op=install 485 486Use --install-prefix=/something to install somewhere other than $prefix 487Use --install-destdir=/somewhere to set DESTDIR during install 488Use --install-host-target to use INSTALL_BIN=$HOST_TARGET/bin 489Use -DWITH_PROG_VERSION to install as bmake-$MAKE_VERSION 490Use -DWITHOUT_PROG_LINK to suppress bmake -> bmake-$MAKE_VERSION symlink 491Use -DWITHOUT_INSTALL_MK to skip installing files to $prefix/share/mk 492EOM 493 fi 494 cat << EOM 495 496Note: bmake.cat1 contains ANSI escape sequences. 497You may need the -r or -R option to more/less to view it correctly. 498 499EOM 500} 501 502op_$op "$@" 503exit 0 504