1: 2# NAME: 3# boot-strap 4# 5# SYNOPSIS: 6# boot-strap ["options"] 7# boot-strap --prefix=/opt --install 8# boot-strap --prefix=$HOME --install-host-target -DWITH_PROG_VERSION 9# boot-strap ["options"] op=build 10# boot-strap ["options"] op=install 11# 12# DESCRIPTION: 13# This script is used to configure/build bmake it builds for 14# each host-target in a different subdir to keep the src clean. 15# There is no requirement for an existing make(1). 16# 17# On successful completion if no '--install' flag is given, 18# it echos a command to do installation. 19# 20# The variable "op" defaults to 'all', and is affected by 21# '--install' flag as above. 22# Other values include: 23# 24# configure 25# Just run 'configure' 26# 27# build 28# If 'configure' has not been done, do it, then 29# run the build script, and finally 'test'. 30# 31# install 32# If 'build' has not been done, do it, 'test' then 33# install. 34# 35# clean 36# attempt to clean up 37# 38# test 39# run the unit-tests. Done automatically after 'build' 40# and before 'install'. 41# 42# The above are leveraged by a trivial makefile for the benefit 43# of those that have './configure; make; make install' baked 44# into them. 45# 46# Options: 47# 48# -c "rc" 49# Pick up settings from "rc". 50# We look for '.bmake-boot-strap.rc' before processing 51# options (unless SKIP_RC is set in environment). 52# 53# --share "share_dir" 54# Where to put man pages and mk files. 55# If $prefix ends in $HOST_TARGET, and $prefix/../share 56# exits, the default will be that rather than $prefix/share. 57# 58# --mksrc "mksrc" 59# Indicate where the mk files can be found. 60# Default is $Mydir/mk 61# 62# --install 63# If build and test work, run bmake install. 64# BINDIR=$prefix/bin 65# SHAREDIR=$prefix/share 66# 67# --install-host-target 68# As for '--install' but BINDIR=$prefix/$HOST_TARGET/bin 69# This is useful when $prefix/ is shared by multiple 70# machines. 71# 72# Flags relevant when installing: 73# 74# -DWITHOUT_INSTALL_MK 75# Skip installing mk files. 76# By default they will be installed to $prefix/share/mk 77# 78# -DWITH_PROG_VERSION 79# Install 'bmake' as 'bmake-$MAKE_VERSION' 80# A symlink will be made as 'bmake' unless 81# -DWITHOUT_PROG_LINK is set. 82# 83# Possibly useful configure_args: 84# 85# --without-meta 86# disable use of meta mode. 87# 88# --without-filemon 89# disable use of filemon(9) which is currently only 90# available for NetBSD and FreeBSD. 91# 92# --with-filemon=ktrace 93# on NetBSD or others with fktrace(2), use ktrace 94# version of filemon. 95# 96# --with-filemon="path/to/filemon.h" 97# enables use of filemon(9) by meta mode. 98# 99# --with-machine="machine" 100# set "machine" to override that determined by 101# machine.sh 102# 103# --with-force-machine="machine" 104# force "machine" even if uname(3) provides a value. 105# 106# --with-machine_arch="machine_arch" 107# set "machine_arch" to override that determined by 108# machine.sh 109# 110# --with-force_machine_arch="machine_arch" 111# force "machine_arch" to override that determined by 112# machine.sh 113# 114# --with-default-sys-path="syspath" 115# set an explicit default "syspath" which is where bmake 116# will look for sys.mk and friends. 117# 118# AUTHOR: 119# Simon J. Gerraty <sjg@crufty.net> 120 121# RCSid: 122# $Id: boot-strap,v 1.58 2023/06/27 21:02:19 sjg Exp $ 123# 124# @(#) Copyright (c) 2001 Simon J. Gerraty 125# 126# This file is provided in the hope that it will 127# be of use. There is absolutely NO WARRANTY. 128# Permission to copy, redistribute or otherwise 129# use this file is hereby granted provided that 130# the above copyright notice and this notice are 131# left intact. 132# 133# Please send copies of changes and bug-fixes to: 134# sjg@crufty.net 135# 136 137Mydir=`dirname $0` 138. "$Mydir/os.sh" 139case "$Mydir" in 140/*) ;; 141*) Mydir=`cd "$Mydir" && 'pwd'`;; 142esac 143 144Usage() { 145 [ "$1" ] && echo "ERROR: $@" >&2 146 echo "Usage:" >&2 147 echo "$0 [--<configure_arg> ...][<prefix>][--install]" >&2 148 exit 1 149} 150 151Error() { 152 echo "ERROR: $@" >&2 153 exit 1 154} 155 156source_rc() { 157 rc="$1"; shift 158 for d in ${*:-""} 159 do 160 r="${d:+$d/}$rc" 161 [ -f "$r" -a -s "$r" ] || continue 162 echo "NOTE: reading $r" 163 . "$r" 164 break 165 done 166} 167 168cmd_args="$@" 169 170# clear some things from the environment that we care about 171unset MAKEOBJDIR MAKEOBJDIRPREFIX 172# or that might be incompatible 173unset MAKE MAKEFLAGS 174 175# --install[-host-target] will set this 176INSTALL_PREFIX= 177# other things we pass to install step 178INSTALL_ARGS= 179CONFIGURE_ARGS= 180MAKESYSPATH= 181# pick a useful default prefix (for me at least ;-) 182for prefix in /opt/$HOST_TARGET "$HOME/$HOST_TARGET" /usr/pkg /usr/local "" 183do 184 [ -d "${prefix:-.}" ] || continue 185 case "$prefix" in 186 */$HOST_TARGET) 187 p=`dirname $prefix` 188 if [ -d $p/share ]; then 189 INSTALL_BIN=$HOST_TARGET/bin 190 prefix=$p 191 fi 192 ;; 193 esac 194 echo "NOTE: default prefix=$prefix ${INSTALL_BIN:+INSTALL_BIN=$INSTALL_BIN}" 195 break 196done 197srcdir=$Mydir 198mksrc=$Mydir/mk 199objdir= 200quiet=: 201 202${SKIP_RC:+:} source_rc .bmake-boot-strap.rc . "$Mydir/.." "$HOME" 203 204get_optarg() { 205 expr "x$1" : "x[^=]*=\\(.*\\)" 206} 207 208here=`'pwd'` 209if [ $here = $Mydir ]; then 210 # avoid pollution 211 OBJROOT=../ 212fi 213 214op=all 215BMAKE= 216 217while : 218do 219 case "$1" in 220 --) shift; break;; 221 --help) sed -n -e "1d;/RCSid/,\$d" -e '/^#\.[a-z]/d' -e '/^#/s,^# *,,p' $0; exit 0;; 222 --prefix) prefix="$2"; shift;; 223 --prefix=*) prefix=`get_optarg "$1"`;; 224 --src=*) srcdir=`get_optarg "$1"`;; 225 --with-mksrc=*|--mksrc=*) mksrc=`get_optarg "$1"`;; 226 --share=*) share_dir=`get_optarg "$1"`;; 227 --share) share_dir="$2"; shift;; 228 --with-default-sys-path=*) 229 CONFIGURE_ARGS="$1";; 230 --with-default-sys-path) 231 CONFIGURE_ARGS="$1 $2";; 232 --install) INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix};; 233 --install-host-target) 234 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 235 INSTALL_BIN=$HOST_TARGET/bin;; 236 --install-destdir=*) INSTALL_DESTDIR=`get_optarg "$1"`;; 237 --install-prefix=*) INSTALL_PREFIX=`get_optarg "$1"`;; 238 -DWITH*) INSTALL_ARGS="$INSTALL_ARGS $1";; 239 -s|--src) srcdir="$2"; shift;; 240 -m|--mksrc) mksrc="$2"; shift;; 241 -o|--objdir) objdir="$2"; shift;; 242 -q) quiet=;; 243 -c) source_rc "$2"; shift;; 244 --*) CONFIGURE_ARGS="$CONFIGURE_ARGS $1";; 245 *=*) eval "$1"; export `expr "x$1" : "x\\(.[^=]*\\)=.*"`;; 246 *) break;; 247 esac 248 shift 249done 250 251AddConfigure() { 252 case " $CONFIGURE_ARGS " in 253 *" $1"*) ;; 254 *) CONFIGURE_ARGS="$CONFIGURE_ARGS $1$2";; 255 esac 256} 257 258GetDir() { 259 match="$1" 260 shift 261 fmatch="$1" 262 shift 263 for dir in $* 264 do 265 [ -d "$dir" ] || continue 266 case "/$dir/" in 267 *$match*) ;; 268 *) continue;; 269 esac 270 case "$fmatch" in 271 .) ;; 272 *) [ -s $dir/$fmatch ] || continue;; 273 esac 274 case "$dir/" in 275 *./*) cd "$dir" && 'pwd';; 276 /*) echo $dir;; 277 *) cd "$dir" && 'pwd';; 278 esac 279 break 280 done 281} 282 283FindHereOrAbove() { 284 ( 285 _t=-s 286 while : 287 do 288 case "$1" in 289 -C) cd "$2"; shift; shift;; 290 -?) _t=$1; shift;; 291 *) break;; 292 esac 293 done 294 case "$1" in 295 /*) # we shouldn't be here 296 [ $_t "$1" ] && echo "$1" 297 return 298 ;; 299 .../*) want=`echo "$1" | sed 's,^.../*,,'`;; 300 *) want="$1";; 301 esac 302 here=`'pwd'` 303 while : 304 do 305 if [ $_t "./$want" ]; then 306 echo "$here/$want" 307 return 308 fi 309 cd .. 310 here=`'pwd'` 311 case "$here" in 312 /) return;; 313 esac 314 done 315 ) 316} 317 318# is $1 missing from $2 (or PATH) ? 319no_path() { 320 eval "__p=\$${2:-PATH}" 321 case ":$__p:" in *:"$1":*) return 1;; *) return 0;; esac 322} 323 324# if $1 exists and is not in path, append it 325add_path () { 326 case "$1" in 327 -?) t=$1; shift;; 328 *) t=-d;; 329 esac 330 case "$2,$1" in 331 MAKESYSPATH,.../*) ;; 332 *) [ $t ${1:-.} ] || return;; 333 esac 334 no_path $* && eval ${2:-PATH}="$__p${__p:+:}$1" 335} 336 337 338srcdir=`GetDir /bmake make-bootstrap.sh.in "$srcdir" "$2" "$Mydir" ./bmake* "$Mydir"/../bmake*` 339[ -d "${srcdir:-/dev/null}" ] || Usage 340case "$mksrc" in 341none|-) # we ignore this now 342 mksrc=$Mydir/mk 343 ;; 344.../*) # find here or above 345 mksrc=`FindHereOrAbove -C "$Mydir" -s "$mksrc/sys.mk"` 346 # that found a file 347 mksrc=`dirname $mksrc` 348 ;; 349*) # guess we want mksrc... 350 mksrc=`GetDir /mk sys.mk "$mksrc" "$3" ./mk* "$srcdir"/mk* "$srcdir"/../mk*` 351 [ -d "${mksrc:-/dev/null}" ] || Usage "Use '-m none' to build without mksrc" 352 ;; 353esac 354 355# Ok, get to work... 356objdir="${objdir:-$OBJROOT$HOST_TARGET}" 357[ -d "$objdir" ] || mkdir -p "$objdir" 358[ -d "$objdir" ] || mkdir "$objdir" 359cd "$objdir" || exit 1 360# make it absolute 361objdir=`'pwd'` 362 363ShareDir() { 364 case "/$1" in 365 /) [ -d /share ] || return;; 366 */$HOST_TARGET) 367 if [ -d "$1/../share" ]; then 368 echo `dirname "$1"`/share 369 return 370 fi 371 ;; 372 esac 373 echo $1/share 374} 375 376# make it easy to force prefix to use $HOST_TARGET 377: looking at "$prefix" 378case "$prefix" in 379*/host?target) prefix=`echo "$prefix" | sed "s,host.target,${HOST_TARGET},"`;; 380esac 381 382share_dir="${share_dir:-`ShareDir $prefix`}" 383 384AddConfigure --prefix= "$prefix" 385case "$CONFIGURE_ARGS" in 386*--with-*-sys-path*) ;; # skip 387*) [ "$share_dir" ] && AddConfigure --with-default-sys-path= "$share_dir/mk";; 388esac 389if [ "$mksrc" ]; then 390 AddConfigure --with-mksrc= "$mksrc" 391 # not all cc's support this 392 CFLAGS_MF= CFLAGS_MD= 393 export CFLAGS_MF CFLAGS_MD 394fi 395 396# this makes it easy to run the bmake we just built 397# the :tA dance is needed because 'pwd' and even /bin/pwd 398# may not give the same result as realpath(). 399Bmake() { 400 ( 401 cd $Mydir && 402 MAKESYSPATH=$mksrc SRCTOP=$Mydir OBJTOP=$objdir \ 403 MAKEOBJDIR='${.CURDIR:S,${SRCTOP:tA},${OBJTOP:tA},}' \ 404 ${BMAKE:-$objdir/bmake} -f $Mydir/Makefile "$@" 405 ) 406} 407 408op_configure() { 409 $srcdir/configure $CONFIGURE_ARGS || exit 1 410} 411 412op_build() { 413 [ -s make-bootstrap.sh ] || op_configure 414 chmod 755 make-bootstrap.sh || exit 1 415 ./make-bootstrap.sh || exit 1 416 case "$op" in 417 build) op_test;; 418 esac 419} 420 421op_test() { 422 [ -x bmake ] || op_build 423 Bmake test TEST_MAKE=$objdir/bmake "$@" || exit 1 424} 425 426op_clean() { 427 if [ -x bmake ]; then 428 ln bmake bmake$$ 429 BMAKE=$objdir/bmake$$ Bmake clean 430 rm -f bmake$$ 431 elif [ $objdir != $srcdir ]; then 432 rm -rf * 433 fi 434} 435 436op_install() { 437 op_test 438 case "$INSTALL_PREFIX,$INSTALL_BIN,$prefix" in 439 ,$HOST_TARGET/bin,*/$HOST_TARGET) 440 INSTALL_PREFIX=`dirname $prefix` 441 ;; 442 esac 443 INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} 444 Bmake install prefix=$INSTALL_PREFIX BINDIR=$INSTALL_PREFIX/${INSTALL_BIN:-bin} ${INSTALL_DESTDIR:+DESTDIR=$INSTALL_DESTDIR} $INSTALL_ARGS || exit 1 445} 446 447op_all() { 448 rm -f make-bootstrap.sh bmake *.o 449 if [ -n "$INSTALL_PREFIX" ]; then 450 op_install 451 else 452 op_test 453 MAKE_VERSION=`sed -n '/^_MAKE_VERSION/ { s,.*= *,,;p; }' $srcdir/Makefile` 454 cat << EOM 455You can install by running: 456 457$0 $cmd_args op=install 458 459Use --install-prefix=/something to install somewhere other than $prefix 460Use --install-destdir=/somewhere to set DESTDIR during install 461Use --install-host-target to use INSTALL_BIN=$HOST_TARGET/bin 462Use -DWITH_PROG_VERSION to install as bmake-$MAKE_VERSION 463Use -DWITHOUT_PROG_LINK to suppress bmake -> bmake-$MAKE_VERSION symlink 464Use -DWITHOUT_INSTALL_MK to skip installing files to $prefix/share/mk 465EOM 466 fi 467 cat << EOM 468 469Note: bmake.cat1 contains ANSI escape sequences. 470You may need the -r or -R option to more/less to view it correctly. 471 472EOM 473} 474 475op_$op "$@" 476exit 0 477