1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #pragma ident "%Z%%M% %I% %E% SMI" 27 28 #include <stdlib.h> 29 #include <strings.h> 30 #include <errno.h> 31 #include <unistd.h> 32 #include <limits.h> 33 #include <assert.h> 34 #include <ctype.h> 35 #if defined(sun) 36 #include <alloca.h> 37 #endif 38 #include <dt_impl.h> 39 40 #define DT_MASK_LO 0x00000000FFFFFFFFULL 41 42 /* 43 * We declare this here because (1) we need it and (2) we want to avoid a 44 * dependency on libm in libdtrace. 45 */ 46 static long double 47 dt_fabsl(long double x) 48 { 49 if (x < 0) 50 return (-x); 51 52 return (x); 53 } 54 55 /* 56 * 128-bit arithmetic functions needed to support the stddev() aggregating 57 * action. 58 */ 59 static int 60 dt_gt_128(uint64_t *a, uint64_t *b) 61 { 62 return (a[1] > b[1] || (a[1] == b[1] && a[0] > b[0])); 63 } 64 65 static int 66 dt_ge_128(uint64_t *a, uint64_t *b) 67 { 68 return (a[1] > b[1] || (a[1] == b[1] && a[0] >= b[0])); 69 } 70 71 static int 72 dt_le_128(uint64_t *a, uint64_t *b) 73 { 74 return (a[1] < b[1] || (a[1] == b[1] && a[0] <= b[0])); 75 } 76 77 /* 78 * Shift the 128-bit value in a by b. If b is positive, shift left. 79 * If b is negative, shift right. 80 */ 81 static void 82 dt_shift_128(uint64_t *a, int b) 83 { 84 uint64_t mask; 85 86 if (b == 0) 87 return; 88 89 if (b < 0) { 90 b = -b; 91 if (b >= 64) { 92 a[0] = a[1] >> (b - 64); 93 a[1] = 0; 94 } else { 95 a[0] >>= b; 96 mask = 1LL << (64 - b); 97 mask -= 1; 98 a[0] |= ((a[1] & mask) << (64 - b)); 99 a[1] >>= b; 100 } 101 } else { 102 if (b >= 64) { 103 a[1] = a[0] << (b - 64); 104 a[0] = 0; 105 } else { 106 a[1] <<= b; 107 mask = a[0] >> (64 - b); 108 a[1] |= mask; 109 a[0] <<= b; 110 } 111 } 112 } 113 114 static int 115 dt_nbits_128(uint64_t *a) 116 { 117 int nbits = 0; 118 uint64_t tmp[2]; 119 uint64_t zero[2] = { 0, 0 }; 120 121 tmp[0] = a[0]; 122 tmp[1] = a[1]; 123 124 dt_shift_128(tmp, -1); 125 while (dt_gt_128(tmp, zero)) { 126 dt_shift_128(tmp, -1); 127 nbits++; 128 } 129 130 return (nbits); 131 } 132 133 static void 134 dt_subtract_128(uint64_t *minuend, uint64_t *subtrahend, uint64_t *difference) 135 { 136 uint64_t result[2]; 137 138 result[0] = minuend[0] - subtrahend[0]; 139 result[1] = minuend[1] - subtrahend[1] - 140 (minuend[0] < subtrahend[0] ? 1 : 0); 141 142 difference[0] = result[0]; 143 difference[1] = result[1]; 144 } 145 146 static void 147 dt_add_128(uint64_t *addend1, uint64_t *addend2, uint64_t *sum) 148 { 149 uint64_t result[2]; 150 151 result[0] = addend1[0] + addend2[0]; 152 result[1] = addend1[1] + addend2[1] + 153 (result[0] < addend1[0] || result[0] < addend2[0] ? 1 : 0); 154 155 sum[0] = result[0]; 156 sum[1] = result[1]; 157 } 158 159 /* 160 * The basic idea is to break the 2 64-bit values into 4 32-bit values, 161 * use native multiplication on those, and then re-combine into the 162 * resulting 128-bit value. 163 * 164 * (hi1 << 32 + lo1) * (hi2 << 32 + lo2) = 165 * hi1 * hi2 << 64 + 166 * hi1 * lo2 << 32 + 167 * hi2 * lo1 << 32 + 168 * lo1 * lo2 169 */ 170 static void 171 dt_multiply_128(uint64_t factor1, uint64_t factor2, uint64_t *product) 172 { 173 uint64_t hi1, hi2, lo1, lo2; 174 uint64_t tmp[2]; 175 176 hi1 = factor1 >> 32; 177 hi2 = factor2 >> 32; 178 179 lo1 = factor1 & DT_MASK_LO; 180 lo2 = factor2 & DT_MASK_LO; 181 182 product[0] = lo1 * lo2; 183 product[1] = hi1 * hi2; 184 185 tmp[0] = hi1 * lo2; 186 tmp[1] = 0; 187 dt_shift_128(tmp, 32); 188 dt_add_128(product, tmp, product); 189 190 tmp[0] = hi2 * lo1; 191 tmp[1] = 0; 192 dt_shift_128(tmp, 32); 193 dt_add_128(product, tmp, product); 194 } 195 196 /* 197 * This is long-hand division. 198 * 199 * We initialize subtrahend by shifting divisor left as far as possible. We 200 * loop, comparing subtrahend to dividend: if subtrahend is smaller, we 201 * subtract and set the appropriate bit in the result. We then shift 202 * subtrahend right by one bit for the next comparison. 203 */ 204 static void 205 dt_divide_128(uint64_t *dividend, uint64_t divisor, uint64_t *quotient) 206 { 207 uint64_t result[2] = { 0, 0 }; 208 uint64_t remainder[2]; 209 uint64_t subtrahend[2]; 210 uint64_t divisor_128[2]; 211 uint64_t mask[2] = { 1, 0 }; 212 int log = 0; 213 214 assert(divisor != 0); 215 216 divisor_128[0] = divisor; 217 divisor_128[1] = 0; 218 219 remainder[0] = dividend[0]; 220 remainder[1] = dividend[1]; 221 222 subtrahend[0] = divisor; 223 subtrahend[1] = 0; 224 225 while (divisor > 0) { 226 log++; 227 divisor >>= 1; 228 } 229 230 dt_shift_128(subtrahend, 128 - log); 231 dt_shift_128(mask, 128 - log); 232 233 while (dt_ge_128(remainder, divisor_128)) { 234 if (dt_ge_128(remainder, subtrahend)) { 235 dt_subtract_128(remainder, subtrahend, remainder); 236 result[0] |= mask[0]; 237 result[1] |= mask[1]; 238 } 239 240 dt_shift_128(subtrahend, -1); 241 dt_shift_128(mask, -1); 242 } 243 244 quotient[0] = result[0]; 245 quotient[1] = result[1]; 246 } 247 248 /* 249 * This is the long-hand method of calculating a square root. 250 * The algorithm is as follows: 251 * 252 * 1. Group the digits by 2 from the right. 253 * 2. Over the leftmost group, find the largest single-digit number 254 * whose square is less than that group. 255 * 3. Subtract the result of the previous step (2 or 4, depending) and 256 * bring down the next two-digit group. 257 * 4. For the result R we have so far, find the largest single-digit number 258 * x such that 2 * R * 10 * x + x^2 is less than the result from step 3. 259 * (Note that this is doubling R and performing a decimal left-shift by 1 260 * and searching for the appropriate decimal to fill the one's place.) 261 * The value x is the next digit in the square root. 262 * Repeat steps 3 and 4 until the desired precision is reached. (We're 263 * dealing with integers, so the above is sufficient.) 264 * 265 * In decimal, the square root of 582,734 would be calculated as so: 266 * 267 * __7__6__3 268 * | 58 27 34 269 * -49 (7^2 == 49 => 7 is the first digit in the square root) 270 * -- 271 * 9 27 (Subtract and bring down the next group.) 272 * 146 8 76 (2 * 7 * 10 * 6 + 6^2 == 876 => 6 is the next digit in 273 * ----- the square root) 274 * 51 34 (Subtract and bring down the next group.) 275 * 1523 45 69 (2 * 76 * 10 * 3 + 3^2 == 4569 => 3 is the next digit in 276 * ----- the square root) 277 * 5 65 (remainder) 278 * 279 * The above algorithm applies similarly in binary, but note that the 280 * only possible non-zero value for x in step 4 is 1, so step 4 becomes a 281 * simple decision: is 2 * R * 2 * 1 + 1^2 (aka R << 2 + 1) less than the 282 * preceding difference? 283 * 284 * In binary, the square root of 11011011 would be calculated as so: 285 * 286 * __1__1__1__0 287 * | 11 01 10 11 288 * 01 (0 << 2 + 1 == 1 < 11 => this bit is 1) 289 * -- 290 * 10 01 10 11 291 * 101 1 01 (1 << 2 + 1 == 101 < 1001 => next bit is 1) 292 * ----- 293 * 1 00 10 11 294 * 1101 11 01 (11 << 2 + 1 == 1101 < 10010 => next bit is 1) 295 * ------- 296 * 1 01 11 297 * 11101 1 11 01 (111 << 2 + 1 == 11101 > 10111 => last bit is 0) 298 * 299 */ 300 static uint64_t 301 dt_sqrt_128(uint64_t *square) 302 { 303 uint64_t result[2] = { 0, 0 }; 304 uint64_t diff[2] = { 0, 0 }; 305 uint64_t one[2] = { 1, 0 }; 306 uint64_t next_pair[2]; 307 uint64_t next_try[2]; 308 uint64_t bit_pairs, pair_shift; 309 int i; 310 311 bit_pairs = dt_nbits_128(square) / 2; 312 pair_shift = bit_pairs * 2; 313 314 for (i = 0; i <= bit_pairs; i++) { 315 /* 316 * Bring down the next pair of bits. 317 */ 318 next_pair[0] = square[0]; 319 next_pair[1] = square[1]; 320 dt_shift_128(next_pair, -pair_shift); 321 next_pair[0] &= 0x3; 322 next_pair[1] = 0; 323 324 dt_shift_128(diff, 2); 325 dt_add_128(diff, next_pair, diff); 326 327 /* 328 * next_try = R << 2 + 1 329 */ 330 next_try[0] = result[0]; 331 next_try[1] = result[1]; 332 dt_shift_128(next_try, 2); 333 dt_add_128(next_try, one, next_try); 334 335 if (dt_le_128(next_try, diff)) { 336 dt_subtract_128(diff, next_try, diff); 337 dt_shift_128(result, 1); 338 dt_add_128(result, one, result); 339 } else { 340 dt_shift_128(result, 1); 341 } 342 343 pair_shift -= 2; 344 } 345 346 assert(result[1] == 0); 347 348 return (result[0]); 349 } 350 351 uint64_t 352 dt_stddev(uint64_t *data, uint64_t normal) 353 { 354 uint64_t avg_of_squares[2]; 355 uint64_t square_of_avg[2]; 356 int64_t norm_avg; 357 uint64_t diff[2]; 358 359 /* 360 * The standard approximation for standard deviation is 361 * sqrt(average(x**2) - average(x)**2), i.e. the square root 362 * of the average of the squares minus the square of the average. 363 */ 364 dt_divide_128(data + 2, normal, avg_of_squares); 365 dt_divide_128(avg_of_squares, data[0], avg_of_squares); 366 367 norm_avg = (int64_t)data[1] / (int64_t)normal / (int64_t)data[0]; 368 369 if (norm_avg < 0) 370 norm_avg = -norm_avg; 371 372 dt_multiply_128((uint64_t)norm_avg, (uint64_t)norm_avg, square_of_avg); 373 374 dt_subtract_128(avg_of_squares, square_of_avg, diff); 375 376 return (dt_sqrt_128(diff)); 377 } 378 379 static int 380 dt_flowindent(dtrace_hdl_t *dtp, dtrace_probedata_t *data, dtrace_epid_t last, 381 dtrace_bufdesc_t *buf, size_t offs) 382 { 383 dtrace_probedesc_t *pd = data->dtpda_pdesc, *npd; 384 dtrace_eprobedesc_t *epd = data->dtpda_edesc, *nepd; 385 char *p = pd->dtpd_provider, *n = pd->dtpd_name, *sub; 386 dtrace_flowkind_t flow = DTRACEFLOW_NONE; 387 const char *str = NULL; 388 static const char *e_str[2] = { " -> ", " => " }; 389 static const char *r_str[2] = { " <- ", " <= " }; 390 static const char *ent = "entry", *ret = "return"; 391 static int entlen = 0, retlen = 0; 392 dtrace_epid_t next, id = epd->dtepd_epid; 393 int rval; 394 395 if (entlen == 0) { 396 assert(retlen == 0); 397 entlen = strlen(ent); 398 retlen = strlen(ret); 399 } 400 401 /* 402 * If the name of the probe is "entry" or ends with "-entry", we 403 * treat it as an entry; if it is "return" or ends with "-return", 404 * we treat it as a return. (This allows application-provided probes 405 * like "method-entry" or "function-entry" to participate in flow 406 * indentation -- without accidentally misinterpreting popular probe 407 * names like "carpentry", "gentry" or "Coventry".) 408 */ 409 if ((sub = strstr(n, ent)) != NULL && sub[entlen] == '\0' && 410 (sub == n || sub[-1] == '-')) { 411 flow = DTRACEFLOW_ENTRY; 412 str = e_str[strcmp(p, "syscall") == 0]; 413 } else if ((sub = strstr(n, ret)) != NULL && sub[retlen] == '\0' && 414 (sub == n || sub[-1] == '-')) { 415 flow = DTRACEFLOW_RETURN; 416 str = r_str[strcmp(p, "syscall") == 0]; 417 } 418 419 /* 420 * If we're going to indent this, we need to check the ID of our last 421 * call. If we're looking at the same probe ID but a different EPID, 422 * we _don't_ want to indent. (Yes, there are some minor holes in 423 * this scheme -- it's a heuristic.) 424 */ 425 if (flow == DTRACEFLOW_ENTRY) { 426 if ((last != DTRACE_EPIDNONE && id != last && 427 pd->dtpd_id == dtp->dt_pdesc[last]->dtpd_id)) 428 flow = DTRACEFLOW_NONE; 429 } 430 431 /* 432 * If we're going to unindent this, it's more difficult to see if 433 * we don't actually want to unindent it -- we need to look at the 434 * _next_ EPID. 435 */ 436 if (flow == DTRACEFLOW_RETURN) { 437 offs += epd->dtepd_size; 438 439 do { 440 if (offs >= buf->dtbd_size) { 441 /* 442 * We're at the end -- maybe. If the oldest 443 * record is non-zero, we need to wrap. 444 */ 445 if (buf->dtbd_oldest != 0) { 446 offs = 0; 447 } else { 448 goto out; 449 } 450 } 451 452 next = *(uint32_t *)((uintptr_t)buf->dtbd_data + offs); 453 454 if (next == DTRACE_EPIDNONE) 455 offs += sizeof (id); 456 } while (next == DTRACE_EPIDNONE); 457 458 if ((rval = dt_epid_lookup(dtp, next, &nepd, &npd)) != 0) 459 return (rval); 460 461 if (next != id && npd->dtpd_id == pd->dtpd_id) 462 flow = DTRACEFLOW_NONE; 463 } 464 465 out: 466 if (flow == DTRACEFLOW_ENTRY || flow == DTRACEFLOW_RETURN) { 467 data->dtpda_prefix = str; 468 } else { 469 data->dtpda_prefix = "| "; 470 } 471 472 if (flow == DTRACEFLOW_RETURN && data->dtpda_indent > 0) 473 data->dtpda_indent -= 2; 474 475 data->dtpda_flow = flow; 476 477 return (0); 478 } 479 480 static int 481 dt_nullprobe() 482 { 483 return (DTRACE_CONSUME_THIS); 484 } 485 486 static int 487 dt_nullrec() 488 { 489 return (DTRACE_CONSUME_NEXT); 490 } 491 492 int 493 dt_print_quantline(dtrace_hdl_t *dtp, FILE *fp, int64_t val, 494 uint64_t normal, long double total, char positives, char negatives) 495 { 496 long double f; 497 uint_t depth, len = 40; 498 499 const char *ats = "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@"; 500 const char *spaces = " "; 501 502 assert(strlen(ats) == len && strlen(spaces) == len); 503 assert(!(total == 0 && (positives || negatives))); 504 assert(!(val < 0 && !negatives)); 505 assert(!(val > 0 && !positives)); 506 assert(!(val != 0 && total == 0)); 507 508 if (!negatives) { 509 if (positives) { 510 f = (dt_fabsl((long double)val) * len) / total; 511 depth = (uint_t)(f + 0.5); 512 } else { 513 depth = 0; 514 } 515 516 return (dt_printf(dtp, fp, "|%s%s %-9lld\n", ats + len - depth, 517 spaces + depth, (long long)val / normal)); 518 } 519 520 if (!positives) { 521 f = (dt_fabsl((long double)val) * len) / total; 522 depth = (uint_t)(f + 0.5); 523 524 return (dt_printf(dtp, fp, "%s%s| %-9lld\n", spaces + depth, 525 ats + len - depth, (long long)val / normal)); 526 } 527 528 /* 529 * If we're here, we have both positive and negative bucket values. 530 * To express this graphically, we're going to generate both positive 531 * and negative bars separated by a centerline. These bars are half 532 * the size of normal quantize()/lquantize() bars, so we divide the 533 * length in half before calculating the bar length. 534 */ 535 len /= 2; 536 ats = &ats[len]; 537 spaces = &spaces[len]; 538 539 f = (dt_fabsl((long double)val) * len) / total; 540 depth = (uint_t)(f + 0.5); 541 542 if (val <= 0) { 543 return (dt_printf(dtp, fp, "%s%s|%*s %-9lld\n", spaces + depth, 544 ats + len - depth, len, "", (long long)val / normal)); 545 } else { 546 return (dt_printf(dtp, fp, "%20s|%s%s %-9lld\n", "", 547 ats + len - depth, spaces + depth, 548 (long long)val / normal)); 549 } 550 } 551 552 int 553 dt_print_quantize(dtrace_hdl_t *dtp, FILE *fp, const void *addr, 554 size_t size, uint64_t normal) 555 { 556 const int64_t *data = addr; 557 int i, first_bin = 0, last_bin = DTRACE_QUANTIZE_NBUCKETS - 1; 558 long double total = 0; 559 char positives = 0, negatives = 0; 560 561 if (size != DTRACE_QUANTIZE_NBUCKETS * sizeof (uint64_t)) 562 return (dt_set_errno(dtp, EDT_DMISMATCH)); 563 564 while (first_bin < DTRACE_QUANTIZE_NBUCKETS - 1 && data[first_bin] == 0) 565 first_bin++; 566 567 if (first_bin == DTRACE_QUANTIZE_NBUCKETS - 1) { 568 /* 569 * There isn't any data. This is possible if (and only if) 570 * negative increment values have been used. In this case, 571 * we'll print the buckets around 0. 572 */ 573 first_bin = DTRACE_QUANTIZE_ZEROBUCKET - 1; 574 last_bin = DTRACE_QUANTIZE_ZEROBUCKET + 1; 575 } else { 576 if (first_bin > 0) 577 first_bin--; 578 579 while (last_bin > 0 && data[last_bin] == 0) 580 last_bin--; 581 582 if (last_bin < DTRACE_QUANTIZE_NBUCKETS - 1) 583 last_bin++; 584 } 585 586 for (i = first_bin; i <= last_bin; i++) { 587 positives |= (data[i] > 0); 588 negatives |= (data[i] < 0); 589 total += dt_fabsl((long double)data[i]); 590 } 591 592 if (dt_printf(dtp, fp, "\n%16s %41s %-9s\n", "value", 593 "------------- Distribution -------------", "count") < 0) 594 return (-1); 595 596 for (i = first_bin; i <= last_bin; i++) { 597 if (dt_printf(dtp, fp, "%16lld ", 598 (long long)DTRACE_QUANTIZE_BUCKETVAL(i)) < 0) 599 return (-1); 600 601 if (dt_print_quantline(dtp, fp, data[i], normal, total, 602 positives, negatives) < 0) 603 return (-1); 604 } 605 606 return (0); 607 } 608 609 int 610 dt_print_lquantize(dtrace_hdl_t *dtp, FILE *fp, const void *addr, 611 size_t size, uint64_t normal) 612 { 613 const int64_t *data = addr; 614 int i, first_bin, last_bin, base; 615 uint64_t arg; 616 long double total = 0; 617 uint16_t step, levels; 618 char positives = 0, negatives = 0; 619 620 if (size < sizeof (uint64_t)) 621 return (dt_set_errno(dtp, EDT_DMISMATCH)); 622 623 arg = *data++; 624 size -= sizeof (uint64_t); 625 626 base = DTRACE_LQUANTIZE_BASE(arg); 627 step = DTRACE_LQUANTIZE_STEP(arg); 628 levels = DTRACE_LQUANTIZE_LEVELS(arg); 629 630 first_bin = 0; 631 last_bin = levels + 1; 632 633 if (size != sizeof (uint64_t) * (levels + 2)) 634 return (dt_set_errno(dtp, EDT_DMISMATCH)); 635 636 while (first_bin <= levels + 1 && data[first_bin] == 0) 637 first_bin++; 638 639 if (first_bin > levels + 1) { 640 first_bin = 0; 641 last_bin = 2; 642 } else { 643 if (first_bin > 0) 644 first_bin--; 645 646 while (last_bin > 0 && data[last_bin] == 0) 647 last_bin--; 648 649 if (last_bin < levels + 1) 650 last_bin++; 651 } 652 653 for (i = first_bin; i <= last_bin; i++) { 654 positives |= (data[i] > 0); 655 negatives |= (data[i] < 0); 656 total += dt_fabsl((long double)data[i]); 657 } 658 659 if (dt_printf(dtp, fp, "\n%16s %41s %-9s\n", "value", 660 "------------- Distribution -------------", "count") < 0) 661 return (-1); 662 663 for (i = first_bin; i <= last_bin; i++) { 664 char c[32]; 665 int err; 666 667 if (i == 0) { 668 (void) snprintf(c, sizeof (c), "< %d", 669 base / (uint32_t)normal); 670 err = dt_printf(dtp, fp, "%16s ", c); 671 } else if (i == levels + 1) { 672 (void) snprintf(c, sizeof (c), ">= %d", 673 base + (levels * step)); 674 err = dt_printf(dtp, fp, "%16s ", c); 675 } else { 676 err = dt_printf(dtp, fp, "%16d ", 677 base + (i - 1) * step); 678 } 679 680 if (err < 0 || dt_print_quantline(dtp, fp, data[i], normal, 681 total, positives, negatives) < 0) 682 return (-1); 683 } 684 685 return (0); 686 } 687 688 /*ARGSUSED*/ 689 static int 690 dt_print_average(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr, 691 size_t size, uint64_t normal) 692 { 693 /* LINTED - alignment */ 694 int64_t *data = (int64_t *)addr; 695 696 return (dt_printf(dtp, fp, " %16lld", data[0] ? 697 (long long)(data[1] / (int64_t)normal / data[0]) : 0)); 698 } 699 700 /*ARGSUSED*/ 701 static int 702 dt_print_stddev(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr, 703 size_t size, uint64_t normal) 704 { 705 /* LINTED - alignment */ 706 uint64_t *data = (uint64_t *)addr; 707 708 return (dt_printf(dtp, fp, " %16llu", data[0] ? 709 (unsigned long long) dt_stddev(data, normal) : 0)); 710 } 711 712 /*ARGSUSED*/ 713 int 714 dt_print_bytes(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr, 715 size_t nbytes, int width, int quiet, int raw) 716 { 717 /* 718 * If the byte stream is a series of printable characters, followed by 719 * a terminating byte, we print it out as a string. Otherwise, we 720 * assume that it's something else and just print the bytes. 721 */ 722 int i, j, margin = 5; 723 char *c = (char *)addr; 724 725 if (nbytes == 0) 726 return (0); 727 728 if (raw || dtp->dt_options[DTRACEOPT_RAWBYTES] != DTRACEOPT_UNSET) 729 goto raw; 730 731 for (i = 0; i < nbytes; i++) { 732 /* 733 * We define a "printable character" to be one for which 734 * isprint(3C) returns non-zero, isspace(3C) returns non-zero, 735 * or a character which is either backspace or the bell. 736 * Backspace and the bell are regrettably special because 737 * they fail the first two tests -- and yet they are entirely 738 * printable. These are the only two control characters that 739 * have meaning for the terminal and for which isprint(3C) and 740 * isspace(3C) return 0. 741 */ 742 if (isprint(c[i]) || isspace(c[i]) || 743 c[i] == '\b' || c[i] == '\a') 744 continue; 745 746 if (c[i] == '\0' && i > 0) { 747 /* 748 * This looks like it might be a string. Before we 749 * assume that it is indeed a string, check the 750 * remainder of the byte range; if it contains 751 * additional non-nul characters, we'll assume that 752 * it's a binary stream that just happens to look like 753 * a string, and we'll print out the individual bytes. 754 */ 755 for (j = i + 1; j < nbytes; j++) { 756 if (c[j] != '\0') 757 break; 758 } 759 760 if (j != nbytes) 761 break; 762 763 if (quiet) 764 return (dt_printf(dtp, fp, "%s", c)); 765 else 766 return (dt_printf(dtp, fp, " %-*s", width, c)); 767 } 768 769 break; 770 } 771 772 if (i == nbytes) { 773 /* 774 * The byte range is all printable characters, but there is 775 * no trailing nul byte. We'll assume that it's a string and 776 * print it as such. 777 */ 778 char *s = alloca(nbytes + 1); 779 bcopy(c, s, nbytes); 780 s[nbytes] = '\0'; 781 return (dt_printf(dtp, fp, " %-*s", width, s)); 782 } 783 784 raw: 785 if (dt_printf(dtp, fp, "\n%*s ", margin, "") < 0) 786 return (-1); 787 788 for (i = 0; i < 16; i++) 789 if (dt_printf(dtp, fp, " %c", "0123456789abcdef"[i]) < 0) 790 return (-1); 791 792 if (dt_printf(dtp, fp, " 0123456789abcdef\n") < 0) 793 return (-1); 794 795 796 for (i = 0; i < nbytes; i += 16) { 797 if (dt_printf(dtp, fp, "%*s%5x:", margin, "", i) < 0) 798 return (-1); 799 800 for (j = i; j < i + 16 && j < nbytes; j++) { 801 if (dt_printf(dtp, fp, " %02x", (uchar_t)c[j]) < 0) 802 return (-1); 803 } 804 805 while (j++ % 16) { 806 if (dt_printf(dtp, fp, " ") < 0) 807 return (-1); 808 } 809 810 if (dt_printf(dtp, fp, " ") < 0) 811 return (-1); 812 813 for (j = i; j < i + 16 && j < nbytes; j++) { 814 if (dt_printf(dtp, fp, "%c", 815 c[j] < ' ' || c[j] > '~' ? '.' : c[j]) < 0) 816 return (-1); 817 } 818 819 if (dt_printf(dtp, fp, "\n") < 0) 820 return (-1); 821 } 822 823 return (0); 824 } 825 826 int 827 dt_print_stack(dtrace_hdl_t *dtp, FILE *fp, const char *format, 828 caddr_t addr, int depth, int size) 829 { 830 dtrace_syminfo_t dts; 831 GElf_Sym sym; 832 int i, indent; 833 char c[PATH_MAX * 2]; 834 uint64_t pc; 835 836 if (dt_printf(dtp, fp, "\n") < 0) 837 return (-1); 838 839 if (format == NULL) 840 format = "%s"; 841 842 if (dtp->dt_options[DTRACEOPT_STACKINDENT] != DTRACEOPT_UNSET) 843 indent = (int)dtp->dt_options[DTRACEOPT_STACKINDENT]; 844 else 845 indent = _dtrace_stkindent; 846 847 for (i = 0; i < depth; i++) { 848 switch (size) { 849 case sizeof (uint32_t): 850 /* LINTED - alignment */ 851 pc = *((uint32_t *)addr); 852 break; 853 854 case sizeof (uint64_t): 855 /* LINTED - alignment */ 856 pc = *((uint64_t *)addr); 857 break; 858 859 default: 860 return (dt_set_errno(dtp, EDT_BADSTACKPC)); 861 } 862 863 if (pc == 0) 864 break; 865 866 addr += size; 867 868 if (dt_printf(dtp, fp, "%*s", indent, "") < 0) 869 return (-1); 870 871 if (dtrace_lookup_by_addr(dtp, pc, &sym, &dts) == 0) { 872 if (pc > sym.st_value) { 873 (void) snprintf(c, sizeof (c), "%s`%s+0x%llx", 874 dts.dts_object, dts.dts_name, 875 pc - sym.st_value); 876 } else { 877 (void) snprintf(c, sizeof (c), "%s`%s", 878 dts.dts_object, dts.dts_name); 879 } 880 } else { 881 /* 882 * We'll repeat the lookup, but this time we'll specify 883 * a NULL GElf_Sym -- indicating that we're only 884 * interested in the containing module. 885 */ 886 if (dtrace_lookup_by_addr(dtp, pc, NULL, &dts) == 0) { 887 (void) snprintf(c, sizeof (c), "%s`0x%llx", 888 dts.dts_object, pc); 889 } else { 890 (void) snprintf(c, sizeof (c), "0x%llx", pc); 891 } 892 } 893 894 if (dt_printf(dtp, fp, format, c) < 0) 895 return (-1); 896 897 if (dt_printf(dtp, fp, "\n") < 0) 898 return (-1); 899 } 900 901 return (0); 902 } 903 904 int 905 dt_print_ustack(dtrace_hdl_t *dtp, FILE *fp, const char *format, 906 caddr_t addr, uint64_t arg) 907 { 908 /* LINTED - alignment */ 909 uint64_t *pc = (uint64_t *)addr; 910 uint32_t depth = DTRACE_USTACK_NFRAMES(arg); 911 uint32_t strsize = DTRACE_USTACK_STRSIZE(arg); 912 const char *strbase = addr + (depth + 1) * sizeof (uint64_t); 913 const char *str = strsize ? strbase : NULL; 914 int err = 0; 915 916 char name[PATH_MAX], objname[PATH_MAX], c[PATH_MAX * 2]; 917 struct ps_prochandle *P; 918 GElf_Sym sym; 919 int i, indent; 920 pid_t pid; 921 922 if (depth == 0) 923 return (0); 924 925 pid = (pid_t)*pc++; 926 927 if (dt_printf(dtp, fp, "\n") < 0) 928 return (-1); 929 930 if (format == NULL) 931 format = "%s"; 932 933 if (dtp->dt_options[DTRACEOPT_STACKINDENT] != DTRACEOPT_UNSET) 934 indent = (int)dtp->dt_options[DTRACEOPT_STACKINDENT]; 935 else 936 indent = _dtrace_stkindent; 937 938 /* 939 * Ultimately, we need to add an entry point in the library vector for 940 * determining <symbol, offset> from <pid, address>. For now, if 941 * this is a vector open, we just print the raw address or string. 942 */ 943 if (dtp->dt_vector == NULL) 944 P = dt_proc_grab(dtp, pid, PGRAB_RDONLY | PGRAB_FORCE, 0); 945 else 946 P = NULL; 947 948 if (P != NULL) 949 dt_proc_lock(dtp, P); /* lock handle while we perform lookups */ 950 951 for (i = 0; i < depth && pc[i] != 0; i++) { 952 const prmap_t *map; 953 954 if ((err = dt_printf(dtp, fp, "%*s", indent, "")) < 0) 955 break; 956 957 #if defined(sun) 958 if (P != NULL && Plookup_by_addr(P, pc[i], 959 #else 960 if (P != NULL && proc_addr2sym(P, pc[i], 961 #endif 962 name, sizeof (name), &sym) == 0) { 963 #if defined(sun) 964 (void) Pobjname(P, pc[i], objname, sizeof (objname)); 965 #else 966 (void) proc_objname(P, pc[i], objname, sizeof (objname)); 967 #endif 968 969 if (pc[i] > sym.st_value) { 970 (void) snprintf(c, sizeof (c), 971 "%s`%s+0x%llx", dt_basename(objname), name, 972 (u_longlong_t)(pc[i] - sym.st_value)); 973 } else { 974 (void) snprintf(c, sizeof (c), 975 "%s`%s", dt_basename(objname), name); 976 } 977 } else if (str != NULL && str[0] != '\0' && str[0] != '@' && 978 #if defined(sun) 979 (P != NULL && ((map = Paddr_to_map(P, pc[i])) == NULL || 980 (map->pr_mflags & MA_WRITE)))) { 981 #else 982 (P != NULL && ((map = proc_addr2map(P, pc[i])) == NULL))) { 983 #endif 984 /* 985 * If the current string pointer in the string table 986 * does not point to an empty string _and_ the program 987 * counter falls in a writable region, we'll use the 988 * string from the string table instead of the raw 989 * address. This last condition is necessary because 990 * some (broken) ustack helpers will return a string 991 * even for a program counter that they can't 992 * identify. If we have a string for a program 993 * counter that falls in a segment that isn't 994 * writable, we assume that we have fallen into this 995 * case and we refuse to use the string. 996 */ 997 (void) snprintf(c, sizeof (c), "%s", str); 998 } else { 999 #if defined(sun) 1000 if (P != NULL && Pobjname(P, pc[i], objname, 1001 #else 1002 if (P != NULL && proc_objname(P, pc[i], objname, 1003 #endif 1004 sizeof (objname)) != 0) { 1005 (void) snprintf(c, sizeof (c), "%s`0x%llx", 1006 dt_basename(objname), (u_longlong_t)pc[i]); 1007 } else { 1008 (void) snprintf(c, sizeof (c), "0x%llx", 1009 (u_longlong_t)pc[i]); 1010 } 1011 } 1012 1013 if ((err = dt_printf(dtp, fp, format, c)) < 0) 1014 break; 1015 1016 if ((err = dt_printf(dtp, fp, "\n")) < 0) 1017 break; 1018 1019 if (str != NULL && str[0] == '@') { 1020 /* 1021 * If the first character of the string is an "at" sign, 1022 * then the string is inferred to be an annotation -- 1023 * and it is printed out beneath the frame and offset 1024 * with brackets. 1025 */ 1026 if ((err = dt_printf(dtp, fp, "%*s", indent, "")) < 0) 1027 break; 1028 1029 (void) snprintf(c, sizeof (c), " [ %s ]", &str[1]); 1030 1031 if ((err = dt_printf(dtp, fp, format, c)) < 0) 1032 break; 1033 1034 if ((err = dt_printf(dtp, fp, "\n")) < 0) 1035 break; 1036 } 1037 1038 if (str != NULL) { 1039 str += strlen(str) + 1; 1040 if (str - strbase >= strsize) 1041 str = NULL; 1042 } 1043 } 1044 1045 if (P != NULL) { 1046 dt_proc_unlock(dtp, P); 1047 dt_proc_release(dtp, P); 1048 } 1049 1050 return (err); 1051 } 1052 1053 static int 1054 dt_print_usym(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr, dtrace_actkind_t act) 1055 { 1056 /* LINTED - alignment */ 1057 uint64_t pid = ((uint64_t *)addr)[0]; 1058 /* LINTED - alignment */ 1059 uint64_t pc = ((uint64_t *)addr)[1]; 1060 const char *format = " %-50s"; 1061 char *s; 1062 int n, len = 256; 1063 1064 if (act == DTRACEACT_USYM && dtp->dt_vector == NULL) { 1065 struct ps_prochandle *P; 1066 1067 if ((P = dt_proc_grab(dtp, pid, 1068 PGRAB_RDONLY | PGRAB_FORCE, 0)) != NULL) { 1069 GElf_Sym sym; 1070 1071 dt_proc_lock(dtp, P); 1072 1073 #if defined(sun) 1074 if (Plookup_by_addr(P, pc, NULL, 0, &sym) == 0) 1075 #else 1076 if (proc_addr2sym(P, pc, NULL, 0, &sym) == 0) 1077 #endif 1078 pc = sym.st_value; 1079 1080 dt_proc_unlock(dtp, P); 1081 dt_proc_release(dtp, P); 1082 } 1083 } 1084 1085 do { 1086 n = len; 1087 s = alloca(n); 1088 } while ((len = dtrace_uaddr2str(dtp, pid, pc, s, n)) >= n); 1089 1090 return (dt_printf(dtp, fp, format, s)); 1091 } 1092 1093 int 1094 dt_print_umod(dtrace_hdl_t *dtp, FILE *fp, const char *format, caddr_t addr) 1095 { 1096 /* LINTED - alignment */ 1097 uint64_t pid = ((uint64_t *)addr)[0]; 1098 /* LINTED - alignment */ 1099 uint64_t pc = ((uint64_t *)addr)[1]; 1100 int err = 0; 1101 1102 char objname[PATH_MAX], c[PATH_MAX * 2]; 1103 struct ps_prochandle *P; 1104 1105 if (format == NULL) 1106 format = " %-50s"; 1107 1108 /* 1109 * See the comment in dt_print_ustack() for the rationale for 1110 * printing raw addresses in the vectored case. 1111 */ 1112 if (dtp->dt_vector == NULL) 1113 P = dt_proc_grab(dtp, pid, PGRAB_RDONLY | PGRAB_FORCE, 0); 1114 else 1115 P = NULL; 1116 1117 if (P != NULL) 1118 dt_proc_lock(dtp, P); /* lock handle while we perform lookups */ 1119 1120 #if defined(sun) 1121 if (P != NULL && Pobjname(P, pc, objname, sizeof (objname)) != 0) { 1122 #else 1123 if (P != NULL && proc_objname(P, pc, objname, sizeof (objname)) != 0) { 1124 #endif 1125 (void) snprintf(c, sizeof (c), "%s", dt_basename(objname)); 1126 } else { 1127 (void) snprintf(c, sizeof (c), "0x%llx", (u_longlong_t)pc); 1128 } 1129 1130 err = dt_printf(dtp, fp, format, c); 1131 1132 if (P != NULL) { 1133 dt_proc_unlock(dtp, P); 1134 dt_proc_release(dtp, P); 1135 } 1136 1137 return (err); 1138 } 1139 1140 int 1141 dt_print_memory(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr) 1142 { 1143 int quiet = (dtp->dt_options[DTRACEOPT_QUIET] != DTRACEOPT_UNSET); 1144 size_t nbytes = *((uintptr_t *) addr); 1145 1146 return (dt_print_bytes(dtp, fp, addr + sizeof(uintptr_t), 1147 nbytes, 50, quiet, 1)); 1148 } 1149 1150 typedef struct dt_type_cbdata { 1151 dtrace_hdl_t *dtp; 1152 dtrace_typeinfo_t dtt; 1153 caddr_t addr; 1154 caddr_t addrend; 1155 const char *name; 1156 int f_type; 1157 int indent; 1158 int type_width; 1159 int name_width; 1160 FILE *fp; 1161 } dt_type_cbdata_t; 1162 1163 static int dt_print_type_data(dt_type_cbdata_t *, ctf_id_t); 1164 1165 static int 1166 dt_print_type_member(const char *name, ctf_id_t type, ulong_t off, void *arg) 1167 { 1168 dt_type_cbdata_t cbdata; 1169 dt_type_cbdata_t *cbdatap = arg; 1170 ssize_t ssz; 1171 1172 if ((ssz = ctf_type_size(cbdatap->dtt.dtt_ctfp, type)) <= 0) 1173 return (0); 1174 1175 off /= 8; 1176 1177 cbdata = *cbdatap; 1178 cbdata.name = name; 1179 cbdata.addr += off; 1180 cbdata.addrend = cbdata.addr + ssz; 1181 1182 return (dt_print_type_data(&cbdata, type)); 1183 } 1184 1185 static int 1186 dt_print_type_width(const char *name, ctf_id_t type, ulong_t off, void *arg) 1187 { 1188 char buf[DT_TYPE_NAMELEN]; 1189 char *p; 1190 dt_type_cbdata_t *cbdatap = arg; 1191 size_t sz = strlen(name); 1192 1193 ctf_type_name(cbdatap->dtt.dtt_ctfp, type, buf, sizeof (buf)); 1194 1195 if ((p = strchr(buf, '[')) != NULL) 1196 p[-1] = '\0'; 1197 else 1198 p = ""; 1199 1200 sz += strlen(p); 1201 1202 if (sz > cbdatap->name_width) 1203 cbdatap->name_width = sz; 1204 1205 sz = strlen(buf); 1206 1207 if (sz > cbdatap->type_width) 1208 cbdatap->type_width = sz; 1209 1210 return (0); 1211 } 1212 1213 static int 1214 dt_print_type_data(dt_type_cbdata_t *cbdatap, ctf_id_t type) 1215 { 1216 caddr_t addr = cbdatap->addr; 1217 caddr_t addrend = cbdatap->addrend; 1218 char buf[DT_TYPE_NAMELEN]; 1219 char *p; 1220 int cnt = 0; 1221 uint_t kind = ctf_type_kind(cbdatap->dtt.dtt_ctfp, type); 1222 ssize_t ssz = ctf_type_size(cbdatap->dtt.dtt_ctfp, type); 1223 1224 ctf_type_name(cbdatap->dtt.dtt_ctfp, type, buf, sizeof (buf)); 1225 1226 if ((p = strchr(buf, '[')) != NULL) 1227 p[-1] = '\0'; 1228 else 1229 p = ""; 1230 1231 if (cbdatap->f_type) { 1232 int type_width = roundup(cbdatap->type_width + 1, 4); 1233 int name_width = roundup(cbdatap->name_width + 1, 4); 1234 1235 name_width -= strlen(cbdatap->name); 1236 1237 dt_printf(cbdatap->dtp, cbdatap->fp, "%*s%-*s%s%-*s = ",cbdatap->indent * 4,"",type_width,buf,cbdatap->name,name_width,p); 1238 } 1239 1240 while (addr < addrend) { 1241 dt_type_cbdata_t cbdata; 1242 ctf_arinfo_t arinfo; 1243 ctf_encoding_t cte; 1244 uintptr_t *up; 1245 void *vp = addr; 1246 cbdata = *cbdatap; 1247 cbdata.name = ""; 1248 cbdata.addr = addr; 1249 cbdata.addrend = addr + ssz; 1250 cbdata.f_type = 0; 1251 cbdata.indent++; 1252 cbdata.type_width = 0; 1253 cbdata.name_width = 0; 1254 1255 if (cnt > 0) 1256 dt_printf(cbdatap->dtp, cbdatap->fp, "%*s", cbdatap->indent * 4,""); 1257 1258 switch (kind) { 1259 case CTF_K_INTEGER: 1260 if (ctf_type_encoding(cbdatap->dtt.dtt_ctfp, type, &cte) != 0) 1261 return (-1); 1262 if ((cte.cte_format & CTF_INT_SIGNED) != 0) 1263 switch (cte.cte_bits) { 1264 case 8: 1265 if (isprint(*((char *) vp))) 1266 dt_printf(cbdatap->dtp, cbdatap->fp, "'%c', ", *((char *) vp)); 1267 dt_printf(cbdatap->dtp, cbdatap->fp, "%d (0x%x);\n", *((char *) vp), *((char *) vp)); 1268 break; 1269 case 16: 1270 dt_printf(cbdatap->dtp, cbdatap->fp, "%hd (0x%hx);\n", *((short *) vp), *((u_short *) vp)); 1271 break; 1272 case 32: 1273 dt_printf(cbdatap->dtp, cbdatap->fp, "%d (0x%x);\n", *((int *) vp), *((u_int *) vp)); 1274 break; 1275 case 64: 1276 dt_printf(cbdatap->dtp, cbdatap->fp, "%jd (0x%jx);\n", *((long long *) vp), *((unsigned long long *) vp)); 1277 break; 1278 default: 1279 dt_printf(cbdatap->dtp, cbdatap->fp, "CTF_K_INTEGER: format %x offset %u bits %u\n",cte.cte_format,cte.cte_offset,cte.cte_bits); 1280 break; 1281 } 1282 else 1283 switch (cte.cte_bits) { 1284 case 8: 1285 dt_printf(cbdatap->dtp, cbdatap->fp, "%u (0x%x);\n", *((uint8_t *) vp) & 0xff, *((uint8_t *) vp) & 0xff); 1286 break; 1287 case 16: 1288 dt_printf(cbdatap->dtp, cbdatap->fp, "%hu (0x%hx);\n", *((u_short *) vp), *((u_short *) vp)); 1289 break; 1290 case 32: 1291 dt_printf(cbdatap->dtp, cbdatap->fp, "%u (0x%x);\n", *((u_int *) vp), *((u_int *) vp)); 1292 break; 1293 case 64: 1294 dt_printf(cbdatap->dtp, cbdatap->fp, "%ju (0x%jx);\n", *((unsigned long long *) vp), *((unsigned long long *) vp)); 1295 break; 1296 default: 1297 dt_printf(cbdatap->dtp, cbdatap->fp, "CTF_K_INTEGER: format %x offset %u bits %u\n",cte.cte_format,cte.cte_offset,cte.cte_bits); 1298 break; 1299 } 1300 break; 1301 case CTF_K_FLOAT: 1302 dt_printf(cbdatap->dtp, cbdatap->fp, "CTF_K_FLOAT: format %x offset %u bits %u\n",cte.cte_format,cte.cte_offset,cte.cte_bits); 1303 break; 1304 case CTF_K_POINTER: 1305 dt_printf(cbdatap->dtp, cbdatap->fp, "%p;\n", *((void **) addr)); 1306 break; 1307 case CTF_K_ARRAY: 1308 if (ctf_array_info(cbdatap->dtt.dtt_ctfp, type, &arinfo) != 0) 1309 return (-1); 1310 dt_printf(cbdatap->dtp, cbdatap->fp, "{\n%*s",cbdata.indent * 4,""); 1311 dt_print_type_data(&cbdata, arinfo.ctr_contents); 1312 dt_printf(cbdatap->dtp, cbdatap->fp, "%*s};\n",cbdatap->indent * 4,""); 1313 break; 1314 case CTF_K_FUNCTION: 1315 dt_printf(cbdatap->dtp, cbdatap->fp, "CTF_K_FUNCTION:\n"); 1316 break; 1317 case CTF_K_STRUCT: 1318 cbdata.f_type = 1; 1319 if (ctf_member_iter(cbdatap->dtt.dtt_ctfp, type, 1320 dt_print_type_width, &cbdata) != 0) 1321 return (-1); 1322 dt_printf(cbdatap->dtp, cbdatap->fp, "{\n"); 1323 if (ctf_member_iter(cbdatap->dtt.dtt_ctfp, type, 1324 dt_print_type_member, &cbdata) != 0) 1325 return (-1); 1326 dt_printf(cbdatap->dtp, cbdatap->fp, "%*s};\n",cbdatap->indent * 4,""); 1327 break; 1328 case CTF_K_UNION: 1329 cbdata.f_type = 1; 1330 if (ctf_member_iter(cbdatap->dtt.dtt_ctfp, type, 1331 dt_print_type_width, &cbdata) != 0) 1332 return (-1); 1333 dt_printf(cbdatap->dtp, cbdatap->fp, "{\n"); 1334 if (ctf_member_iter(cbdatap->dtt.dtt_ctfp, type, 1335 dt_print_type_member, &cbdata) != 0) 1336 return (-1); 1337 dt_printf(cbdatap->dtp, cbdatap->fp, "%*s};\n",cbdatap->indent * 4,""); 1338 break; 1339 case CTF_K_ENUM: 1340 dt_printf(cbdatap->dtp, cbdatap->fp, "%s;\n", ctf_enum_name(cbdatap->dtt.dtt_ctfp, type, *((int *) vp))); 1341 break; 1342 case CTF_K_TYPEDEF: 1343 dt_print_type_data(&cbdata, ctf_type_reference(cbdatap->dtt.dtt_ctfp,type)); 1344 break; 1345 case CTF_K_VOLATILE: 1346 if (cbdatap->f_type) 1347 dt_printf(cbdatap->dtp, cbdatap->fp, "volatile "); 1348 dt_print_type_data(&cbdata, ctf_type_reference(cbdatap->dtt.dtt_ctfp,type)); 1349 break; 1350 case CTF_K_CONST: 1351 if (cbdatap->f_type) 1352 dt_printf(cbdatap->dtp, cbdatap->fp, "const "); 1353 dt_print_type_data(&cbdata, ctf_type_reference(cbdatap->dtt.dtt_ctfp,type)); 1354 break; 1355 case CTF_K_RESTRICT: 1356 if (cbdatap->f_type) 1357 dt_printf(cbdatap->dtp, cbdatap->fp, "restrict "); 1358 dt_print_type_data(&cbdata, ctf_type_reference(cbdatap->dtt.dtt_ctfp,type)); 1359 break; 1360 default: 1361 break; 1362 } 1363 1364 addr += ssz; 1365 cnt++; 1366 } 1367 1368 return (0); 1369 } 1370 1371 static int 1372 dt_print_type(dtrace_hdl_t *dtp, FILE *fp, caddr_t addr) 1373 { 1374 caddr_t addrend; 1375 char *p; 1376 dtrace_typeinfo_t dtt; 1377 dt_type_cbdata_t cbdata; 1378 int num = 0; 1379 int quiet = (dtp->dt_options[DTRACEOPT_QUIET] != DTRACEOPT_UNSET); 1380 ssize_t ssz; 1381 1382 if (!quiet) 1383 dt_printf(dtp, fp, "\n"); 1384 1385 /* Get the total number of bytes of data buffered. */ 1386 size_t nbytes = *((uintptr_t *) addr); 1387 addr += sizeof(uintptr_t); 1388 1389 /* 1390 * Get the size of the type so that we can check that it matches 1391 * the CTF data we look up and so that we can figure out how many 1392 * type elements are buffered. 1393 */ 1394 size_t typs = *((uintptr_t *) addr); 1395 addr += sizeof(uintptr_t); 1396 1397 /* 1398 * Point to the type string in the buffer. Get it's string 1399 * length and round it up to become the offset to the start 1400 * of the buffered type data which we would like to be aligned 1401 * for easy access. 1402 */ 1403 char *strp = (char *) addr; 1404 int offset = roundup(strlen(strp) + 1, sizeof(uintptr_t)); 1405 1406 /* 1407 * The type string might have a format such as 'int [20]'. 1408 * Check if there is an array dimension present. 1409 */ 1410 if ((p = strchr(strp, '[')) != NULL) { 1411 /* Strip off the array dimension. */ 1412 *p++ = '\0'; 1413 1414 for (; *p != '\0' && *p != ']'; p++) 1415 num = num * 10 + *p - '0'; 1416 } else 1417 /* No array dimension, so default. */ 1418 num = 1; 1419 1420 /* Lookup the CTF type from the type string. */ 1421 if (dtrace_lookup_by_type(dtp, DTRACE_OBJ_EVERY, strp, &dtt) < 0) 1422 return (-1); 1423 1424 /* Offset the buffer address to the start of the data... */ 1425 addr += offset; 1426 1427 ssz = ctf_type_size(dtt.dtt_ctfp, dtt.dtt_type); 1428 1429 if (typs != ssz) { 1430 printf("Expected type size from buffer (%lu) to match type size looked up now (%ld)\n", (u_long) typs, (long) ssz); 1431 return (-1); 1432 } 1433 1434 cbdata.dtp = dtp; 1435 cbdata.dtt = dtt; 1436 cbdata.name = ""; 1437 cbdata.addr = addr; 1438 cbdata.addrend = addr + nbytes; 1439 cbdata.indent = 1; 1440 cbdata.f_type = 1; 1441 cbdata.type_width = 0; 1442 cbdata.name_width = 0; 1443 cbdata.fp = fp; 1444 1445 return (dt_print_type_data(&cbdata, dtt.dtt_type)); 1446 } 1447 1448 static int 1449 dt_print_sym(dtrace_hdl_t *dtp, FILE *fp, const char *format, caddr_t addr) 1450 { 1451 /* LINTED - alignment */ 1452 uint64_t pc = *((uint64_t *)addr); 1453 dtrace_syminfo_t dts; 1454 GElf_Sym sym; 1455 char c[PATH_MAX * 2]; 1456 1457 if (format == NULL) 1458 format = " %-50s"; 1459 1460 if (dtrace_lookup_by_addr(dtp, pc, &sym, &dts) == 0) { 1461 (void) snprintf(c, sizeof (c), "%s`%s", 1462 dts.dts_object, dts.dts_name); 1463 } else { 1464 /* 1465 * We'll repeat the lookup, but this time we'll specify a 1466 * NULL GElf_Sym -- indicating that we're only interested in 1467 * the containing module. 1468 */ 1469 if (dtrace_lookup_by_addr(dtp, pc, NULL, &dts) == 0) { 1470 (void) snprintf(c, sizeof (c), "%s`0x%llx", 1471 dts.dts_object, (u_longlong_t)pc); 1472 } else { 1473 (void) snprintf(c, sizeof (c), "0x%llx", 1474 (u_longlong_t)pc); 1475 } 1476 } 1477 1478 if (dt_printf(dtp, fp, format, c) < 0) 1479 return (-1); 1480 1481 return (0); 1482 } 1483 1484 int 1485 dt_print_mod(dtrace_hdl_t *dtp, FILE *fp, const char *format, caddr_t addr) 1486 { 1487 /* LINTED - alignment */ 1488 uint64_t pc = *((uint64_t *)addr); 1489 dtrace_syminfo_t dts; 1490 char c[PATH_MAX * 2]; 1491 1492 if (format == NULL) 1493 format = " %-50s"; 1494 1495 if (dtrace_lookup_by_addr(dtp, pc, NULL, &dts) == 0) { 1496 (void) snprintf(c, sizeof (c), "%s", dts.dts_object); 1497 } else { 1498 (void) snprintf(c, sizeof (c), "0x%llx", (u_longlong_t)pc); 1499 } 1500 1501 if (dt_printf(dtp, fp, format, c) < 0) 1502 return (-1); 1503 1504 return (0); 1505 } 1506 1507 typedef struct dt_normal { 1508 dtrace_aggvarid_t dtnd_id; 1509 uint64_t dtnd_normal; 1510 } dt_normal_t; 1511 1512 static int 1513 dt_normalize_agg(const dtrace_aggdata_t *aggdata, void *arg) 1514 { 1515 dt_normal_t *normal = arg; 1516 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1517 dtrace_aggvarid_t id = normal->dtnd_id; 1518 1519 if (agg->dtagd_nrecs == 0) 1520 return (DTRACE_AGGWALK_NEXT); 1521 1522 if (agg->dtagd_varid != id) 1523 return (DTRACE_AGGWALK_NEXT); 1524 1525 ((dtrace_aggdata_t *)aggdata)->dtada_normal = normal->dtnd_normal; 1526 return (DTRACE_AGGWALK_NORMALIZE); 1527 } 1528 1529 static int 1530 dt_normalize(dtrace_hdl_t *dtp, caddr_t base, dtrace_recdesc_t *rec) 1531 { 1532 dt_normal_t normal; 1533 caddr_t addr; 1534 1535 /* 1536 * We (should) have two records: the aggregation ID followed by the 1537 * normalization value. 1538 */ 1539 addr = base + rec->dtrd_offset; 1540 1541 if (rec->dtrd_size != sizeof (dtrace_aggvarid_t)) 1542 return (dt_set_errno(dtp, EDT_BADNORMAL)); 1543 1544 /* LINTED - alignment */ 1545 normal.dtnd_id = *((dtrace_aggvarid_t *)addr); 1546 rec++; 1547 1548 if (rec->dtrd_action != DTRACEACT_LIBACT) 1549 return (dt_set_errno(dtp, EDT_BADNORMAL)); 1550 1551 if (rec->dtrd_arg != DT_ACT_NORMALIZE) 1552 return (dt_set_errno(dtp, EDT_BADNORMAL)); 1553 1554 addr = base + rec->dtrd_offset; 1555 1556 switch (rec->dtrd_size) { 1557 case sizeof (uint64_t): 1558 /* LINTED - alignment */ 1559 normal.dtnd_normal = *((uint64_t *)addr); 1560 break; 1561 case sizeof (uint32_t): 1562 /* LINTED - alignment */ 1563 normal.dtnd_normal = *((uint32_t *)addr); 1564 break; 1565 case sizeof (uint16_t): 1566 /* LINTED - alignment */ 1567 normal.dtnd_normal = *((uint16_t *)addr); 1568 break; 1569 case sizeof (uint8_t): 1570 normal.dtnd_normal = *((uint8_t *)addr); 1571 break; 1572 default: 1573 return (dt_set_errno(dtp, EDT_BADNORMAL)); 1574 } 1575 1576 (void) dtrace_aggregate_walk(dtp, dt_normalize_agg, &normal); 1577 1578 return (0); 1579 } 1580 1581 static int 1582 dt_denormalize_agg(const dtrace_aggdata_t *aggdata, void *arg) 1583 { 1584 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1585 dtrace_aggvarid_t id = *((dtrace_aggvarid_t *)arg); 1586 1587 if (agg->dtagd_nrecs == 0) 1588 return (DTRACE_AGGWALK_NEXT); 1589 1590 if (agg->dtagd_varid != id) 1591 return (DTRACE_AGGWALK_NEXT); 1592 1593 return (DTRACE_AGGWALK_DENORMALIZE); 1594 } 1595 1596 static int 1597 dt_clear_agg(const dtrace_aggdata_t *aggdata, void *arg) 1598 { 1599 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1600 dtrace_aggvarid_t id = *((dtrace_aggvarid_t *)arg); 1601 1602 if (agg->dtagd_nrecs == 0) 1603 return (DTRACE_AGGWALK_NEXT); 1604 1605 if (agg->dtagd_varid != id) 1606 return (DTRACE_AGGWALK_NEXT); 1607 1608 return (DTRACE_AGGWALK_CLEAR); 1609 } 1610 1611 typedef struct dt_trunc { 1612 dtrace_aggvarid_t dttd_id; 1613 uint64_t dttd_remaining; 1614 } dt_trunc_t; 1615 1616 static int 1617 dt_trunc_agg(const dtrace_aggdata_t *aggdata, void *arg) 1618 { 1619 dt_trunc_t *trunc = arg; 1620 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1621 dtrace_aggvarid_t id = trunc->dttd_id; 1622 1623 if (agg->dtagd_nrecs == 0) 1624 return (DTRACE_AGGWALK_NEXT); 1625 1626 if (agg->dtagd_varid != id) 1627 return (DTRACE_AGGWALK_NEXT); 1628 1629 if (trunc->dttd_remaining == 0) 1630 return (DTRACE_AGGWALK_REMOVE); 1631 1632 trunc->dttd_remaining--; 1633 return (DTRACE_AGGWALK_NEXT); 1634 } 1635 1636 static int 1637 dt_trunc(dtrace_hdl_t *dtp, caddr_t base, dtrace_recdesc_t *rec) 1638 { 1639 dt_trunc_t trunc; 1640 caddr_t addr; 1641 int64_t remaining; 1642 int (*func)(dtrace_hdl_t *, dtrace_aggregate_f *, void *); 1643 1644 /* 1645 * We (should) have two records: the aggregation ID followed by the 1646 * number of aggregation entries after which the aggregation is to be 1647 * truncated. 1648 */ 1649 addr = base + rec->dtrd_offset; 1650 1651 if (rec->dtrd_size != sizeof (dtrace_aggvarid_t)) 1652 return (dt_set_errno(dtp, EDT_BADTRUNC)); 1653 1654 /* LINTED - alignment */ 1655 trunc.dttd_id = *((dtrace_aggvarid_t *)addr); 1656 rec++; 1657 1658 if (rec->dtrd_action != DTRACEACT_LIBACT) 1659 return (dt_set_errno(dtp, EDT_BADTRUNC)); 1660 1661 if (rec->dtrd_arg != DT_ACT_TRUNC) 1662 return (dt_set_errno(dtp, EDT_BADTRUNC)); 1663 1664 addr = base + rec->dtrd_offset; 1665 1666 switch (rec->dtrd_size) { 1667 case sizeof (uint64_t): 1668 /* LINTED - alignment */ 1669 remaining = *((int64_t *)addr); 1670 break; 1671 case sizeof (uint32_t): 1672 /* LINTED - alignment */ 1673 remaining = *((int32_t *)addr); 1674 break; 1675 case sizeof (uint16_t): 1676 /* LINTED - alignment */ 1677 remaining = *((int16_t *)addr); 1678 break; 1679 case sizeof (uint8_t): 1680 remaining = *((int8_t *)addr); 1681 break; 1682 default: 1683 return (dt_set_errno(dtp, EDT_BADNORMAL)); 1684 } 1685 1686 if (remaining < 0) { 1687 func = dtrace_aggregate_walk_valsorted; 1688 remaining = -remaining; 1689 } else { 1690 func = dtrace_aggregate_walk_valrevsorted; 1691 } 1692 1693 assert(remaining >= 0); 1694 trunc.dttd_remaining = remaining; 1695 1696 (void) func(dtp, dt_trunc_agg, &trunc); 1697 1698 return (0); 1699 } 1700 1701 static int 1702 dt_print_datum(dtrace_hdl_t *dtp, FILE *fp, dtrace_recdesc_t *rec, 1703 caddr_t addr, size_t size, uint64_t normal) 1704 { 1705 int err; 1706 dtrace_actkind_t act = rec->dtrd_action; 1707 1708 switch (act) { 1709 case DTRACEACT_STACK: 1710 return (dt_print_stack(dtp, fp, NULL, addr, 1711 rec->dtrd_arg, rec->dtrd_size / rec->dtrd_arg)); 1712 1713 case DTRACEACT_USTACK: 1714 case DTRACEACT_JSTACK: 1715 return (dt_print_ustack(dtp, fp, NULL, addr, rec->dtrd_arg)); 1716 1717 case DTRACEACT_USYM: 1718 case DTRACEACT_UADDR: 1719 return (dt_print_usym(dtp, fp, addr, act)); 1720 1721 case DTRACEACT_UMOD: 1722 return (dt_print_umod(dtp, fp, NULL, addr)); 1723 1724 case DTRACEACT_SYM: 1725 return (dt_print_sym(dtp, fp, NULL, addr)); 1726 1727 case DTRACEACT_MOD: 1728 return (dt_print_mod(dtp, fp, NULL, addr)); 1729 1730 case DTRACEAGG_QUANTIZE: 1731 return (dt_print_quantize(dtp, fp, addr, size, normal)); 1732 1733 case DTRACEAGG_LQUANTIZE: 1734 return (dt_print_lquantize(dtp, fp, addr, size, normal)); 1735 1736 case DTRACEAGG_AVG: 1737 return (dt_print_average(dtp, fp, addr, size, normal)); 1738 1739 case DTRACEAGG_STDDEV: 1740 return (dt_print_stddev(dtp, fp, addr, size, normal)); 1741 1742 default: 1743 break; 1744 } 1745 1746 switch (size) { 1747 case sizeof (uint64_t): 1748 err = dt_printf(dtp, fp, " %16lld", 1749 /* LINTED - alignment */ 1750 (long long)*((uint64_t *)addr) / normal); 1751 break; 1752 case sizeof (uint32_t): 1753 /* LINTED - alignment */ 1754 err = dt_printf(dtp, fp, " %8d", *((uint32_t *)addr) / 1755 (uint32_t)normal); 1756 break; 1757 case sizeof (uint16_t): 1758 /* LINTED - alignment */ 1759 err = dt_printf(dtp, fp, " %5d", *((uint16_t *)addr) / 1760 (uint32_t)normal); 1761 break; 1762 case sizeof (uint8_t): 1763 err = dt_printf(dtp, fp, " %3d", *((uint8_t *)addr) / 1764 (uint32_t)normal); 1765 break; 1766 default: 1767 err = dt_print_bytes(dtp, fp, addr, size, 50, 0, 0); 1768 break; 1769 } 1770 1771 return (err); 1772 } 1773 1774 int 1775 dt_print_aggs(const dtrace_aggdata_t **aggsdata, int naggvars, void *arg) 1776 { 1777 int i, aggact = 0; 1778 dt_print_aggdata_t *pd = arg; 1779 const dtrace_aggdata_t *aggdata = aggsdata[0]; 1780 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1781 FILE *fp = pd->dtpa_fp; 1782 dtrace_hdl_t *dtp = pd->dtpa_dtp; 1783 dtrace_recdesc_t *rec; 1784 dtrace_actkind_t act; 1785 caddr_t addr; 1786 size_t size; 1787 1788 /* 1789 * Iterate over each record description in the key, printing the traced 1790 * data, skipping the first datum (the tuple member created by the 1791 * compiler). 1792 */ 1793 for (i = 1; i < agg->dtagd_nrecs; i++) { 1794 rec = &agg->dtagd_rec[i]; 1795 act = rec->dtrd_action; 1796 addr = aggdata->dtada_data + rec->dtrd_offset; 1797 size = rec->dtrd_size; 1798 1799 if (DTRACEACT_ISAGG(act)) { 1800 aggact = i; 1801 break; 1802 } 1803 1804 if (dt_print_datum(dtp, fp, rec, addr, size, 1) < 0) 1805 return (-1); 1806 1807 if (dt_buffered_flush(dtp, NULL, rec, aggdata, 1808 DTRACE_BUFDATA_AGGKEY) < 0) 1809 return (-1); 1810 } 1811 1812 assert(aggact != 0); 1813 1814 for (i = (naggvars == 1 ? 0 : 1); i < naggvars; i++) { 1815 uint64_t normal; 1816 1817 aggdata = aggsdata[i]; 1818 agg = aggdata->dtada_desc; 1819 rec = &agg->dtagd_rec[aggact]; 1820 act = rec->dtrd_action; 1821 addr = aggdata->dtada_data + rec->dtrd_offset; 1822 size = rec->dtrd_size; 1823 1824 assert(DTRACEACT_ISAGG(act)); 1825 normal = aggdata->dtada_normal; 1826 1827 if (dt_print_datum(dtp, fp, rec, addr, size, normal) < 0) 1828 return (-1); 1829 1830 if (dt_buffered_flush(dtp, NULL, rec, aggdata, 1831 DTRACE_BUFDATA_AGGVAL) < 0) 1832 return (-1); 1833 1834 if (!pd->dtpa_allunprint) 1835 agg->dtagd_flags |= DTRACE_AGD_PRINTED; 1836 } 1837 1838 if (dt_printf(dtp, fp, "\n") < 0) 1839 return (-1); 1840 1841 if (dt_buffered_flush(dtp, NULL, NULL, aggdata, 1842 DTRACE_BUFDATA_AGGFORMAT | DTRACE_BUFDATA_AGGLAST) < 0) 1843 return (-1); 1844 1845 return (0); 1846 } 1847 1848 int 1849 dt_print_agg(const dtrace_aggdata_t *aggdata, void *arg) 1850 { 1851 dt_print_aggdata_t *pd = arg; 1852 dtrace_aggdesc_t *agg = aggdata->dtada_desc; 1853 dtrace_aggvarid_t aggvarid = pd->dtpa_id; 1854 1855 if (pd->dtpa_allunprint) { 1856 if (agg->dtagd_flags & DTRACE_AGD_PRINTED) 1857 return (0); 1858 } else { 1859 /* 1860 * If we're not printing all unprinted aggregations, then the 1861 * aggregation variable ID denotes a specific aggregation 1862 * variable that we should print -- skip any other aggregations 1863 * that we encounter. 1864 */ 1865 if (agg->dtagd_nrecs == 0) 1866 return (0); 1867 1868 if (aggvarid != agg->dtagd_varid) 1869 return (0); 1870 } 1871 1872 return (dt_print_aggs(&aggdata, 1, arg)); 1873 } 1874 1875 int 1876 dt_setopt(dtrace_hdl_t *dtp, const dtrace_probedata_t *data, 1877 const char *option, const char *value) 1878 { 1879 int len, rval; 1880 char *msg; 1881 const char *errstr; 1882 dtrace_setoptdata_t optdata; 1883 1884 bzero(&optdata, sizeof (optdata)); 1885 (void) dtrace_getopt(dtp, option, &optdata.dtsda_oldval); 1886 1887 if (dtrace_setopt(dtp, option, value) == 0) { 1888 (void) dtrace_getopt(dtp, option, &optdata.dtsda_newval); 1889 optdata.dtsda_probe = data; 1890 optdata.dtsda_option = option; 1891 optdata.dtsda_handle = dtp; 1892 1893 if ((rval = dt_handle_setopt(dtp, &optdata)) != 0) 1894 return (rval); 1895 1896 return (0); 1897 } 1898 1899 errstr = dtrace_errmsg(dtp, dtrace_errno(dtp)); 1900 len = strlen(option) + strlen(value) + strlen(errstr) + 80; 1901 msg = alloca(len); 1902 1903 (void) snprintf(msg, len, "couldn't set option \"%s\" to \"%s\": %s\n", 1904 option, value, errstr); 1905 1906 if ((rval = dt_handle_liberr(dtp, data, msg)) == 0) 1907 return (0); 1908 1909 return (rval); 1910 } 1911 1912 static int 1913 dt_consume_cpu(dtrace_hdl_t *dtp, FILE *fp, int cpu, dtrace_bufdesc_t *buf, 1914 dtrace_consume_probe_f *efunc, dtrace_consume_rec_f *rfunc, void *arg) 1915 { 1916 dtrace_epid_t id; 1917 size_t offs, start = buf->dtbd_oldest, end = buf->dtbd_size; 1918 int flow = (dtp->dt_options[DTRACEOPT_FLOWINDENT] != DTRACEOPT_UNSET); 1919 int quiet = (dtp->dt_options[DTRACEOPT_QUIET] != DTRACEOPT_UNSET); 1920 int rval, i, n; 1921 dtrace_epid_t last = DTRACE_EPIDNONE; 1922 dtrace_probedata_t data; 1923 uint64_t drops; 1924 caddr_t addr; 1925 1926 bzero(&data, sizeof (data)); 1927 data.dtpda_handle = dtp; 1928 data.dtpda_cpu = cpu; 1929 1930 again: 1931 for (offs = start; offs < end; ) { 1932 dtrace_eprobedesc_t *epd; 1933 1934 /* 1935 * We're guaranteed to have an ID. 1936 */ 1937 id = *(uint32_t *)((uintptr_t)buf->dtbd_data + offs); 1938 1939 if (id == DTRACE_EPIDNONE) { 1940 /* 1941 * This is filler to assure proper alignment of the 1942 * next record; we simply ignore it. 1943 */ 1944 offs += sizeof (id); 1945 continue; 1946 } 1947 1948 if ((rval = dt_epid_lookup(dtp, id, &data.dtpda_edesc, 1949 &data.dtpda_pdesc)) != 0) 1950 return (rval); 1951 1952 epd = data.dtpda_edesc; 1953 data.dtpda_data = buf->dtbd_data + offs; 1954 1955 if (data.dtpda_edesc->dtepd_uarg != DT_ECB_DEFAULT) { 1956 rval = dt_handle(dtp, &data); 1957 1958 if (rval == DTRACE_CONSUME_NEXT) 1959 goto nextepid; 1960 1961 if (rval == DTRACE_CONSUME_ERROR) 1962 return (-1); 1963 } 1964 1965 if (flow) 1966 (void) dt_flowindent(dtp, &data, last, buf, offs); 1967 1968 rval = (*efunc)(&data, arg); 1969 1970 if (flow) { 1971 if (data.dtpda_flow == DTRACEFLOW_ENTRY) 1972 data.dtpda_indent += 2; 1973 } 1974 1975 if (rval == DTRACE_CONSUME_NEXT) 1976 goto nextepid; 1977 1978 if (rval == DTRACE_CONSUME_ABORT) 1979 return (dt_set_errno(dtp, EDT_DIRABORT)); 1980 1981 if (rval != DTRACE_CONSUME_THIS) 1982 return (dt_set_errno(dtp, EDT_BADRVAL)); 1983 1984 for (i = 0; i < epd->dtepd_nrecs; i++) { 1985 dtrace_recdesc_t *rec = &epd->dtepd_rec[i]; 1986 dtrace_actkind_t act = rec->dtrd_action; 1987 1988 data.dtpda_data = buf->dtbd_data + offs + 1989 rec->dtrd_offset; 1990 addr = data.dtpda_data; 1991 1992 if (act == DTRACEACT_LIBACT) { 1993 uint64_t arg = rec->dtrd_arg; 1994 dtrace_aggvarid_t id; 1995 1996 switch (arg) { 1997 case DT_ACT_CLEAR: 1998 /* LINTED - alignment */ 1999 id = *((dtrace_aggvarid_t *)addr); 2000 (void) dtrace_aggregate_walk(dtp, 2001 dt_clear_agg, &id); 2002 continue; 2003 2004 case DT_ACT_DENORMALIZE: 2005 /* LINTED - alignment */ 2006 id = *((dtrace_aggvarid_t *)addr); 2007 (void) dtrace_aggregate_walk(dtp, 2008 dt_denormalize_agg, &id); 2009 continue; 2010 2011 case DT_ACT_FTRUNCATE: 2012 if (fp == NULL) 2013 continue; 2014 2015 (void) fflush(fp); 2016 (void) ftruncate(fileno(fp), 0); 2017 (void) fseeko(fp, 0, SEEK_SET); 2018 continue; 2019 2020 case DT_ACT_NORMALIZE: 2021 if (i == epd->dtepd_nrecs - 1) 2022 return (dt_set_errno(dtp, 2023 EDT_BADNORMAL)); 2024 2025 if (dt_normalize(dtp, 2026 buf->dtbd_data + offs, rec) != 0) 2027 return (-1); 2028 2029 i++; 2030 continue; 2031 2032 case DT_ACT_SETOPT: { 2033 uint64_t *opts = dtp->dt_options; 2034 dtrace_recdesc_t *valrec; 2035 uint32_t valsize; 2036 caddr_t val; 2037 int rv; 2038 2039 if (i == epd->dtepd_nrecs - 1) { 2040 return (dt_set_errno(dtp, 2041 EDT_BADSETOPT)); 2042 } 2043 2044 valrec = &epd->dtepd_rec[++i]; 2045 valsize = valrec->dtrd_size; 2046 2047 if (valrec->dtrd_action != act || 2048 valrec->dtrd_arg != arg) { 2049 return (dt_set_errno(dtp, 2050 EDT_BADSETOPT)); 2051 } 2052 2053 if (valsize > sizeof (uint64_t)) { 2054 val = buf->dtbd_data + offs + 2055 valrec->dtrd_offset; 2056 } else { 2057 val = "1"; 2058 } 2059 2060 rv = dt_setopt(dtp, &data, addr, val); 2061 2062 if (rv != 0) 2063 return (-1); 2064 2065 flow = (opts[DTRACEOPT_FLOWINDENT] != 2066 DTRACEOPT_UNSET); 2067 quiet = (opts[DTRACEOPT_QUIET] != 2068 DTRACEOPT_UNSET); 2069 2070 continue; 2071 } 2072 2073 case DT_ACT_TRUNC: 2074 if (i == epd->dtepd_nrecs - 1) 2075 return (dt_set_errno(dtp, 2076 EDT_BADTRUNC)); 2077 2078 if (dt_trunc(dtp, 2079 buf->dtbd_data + offs, rec) != 0) 2080 return (-1); 2081 2082 i++; 2083 continue; 2084 2085 default: 2086 continue; 2087 } 2088 } 2089 2090 rval = (*rfunc)(&data, rec, arg); 2091 2092 if (rval == DTRACE_CONSUME_NEXT) 2093 continue; 2094 2095 if (rval == DTRACE_CONSUME_ABORT) 2096 return (dt_set_errno(dtp, EDT_DIRABORT)); 2097 2098 if (rval != DTRACE_CONSUME_THIS) 2099 return (dt_set_errno(dtp, EDT_BADRVAL)); 2100 2101 if (act == DTRACEACT_STACK) { 2102 int depth = rec->dtrd_arg; 2103 2104 if (dt_print_stack(dtp, fp, NULL, addr, depth, 2105 rec->dtrd_size / depth) < 0) 2106 return (-1); 2107 goto nextrec; 2108 } 2109 2110 if (act == DTRACEACT_USTACK || 2111 act == DTRACEACT_JSTACK) { 2112 if (dt_print_ustack(dtp, fp, NULL, 2113 addr, rec->dtrd_arg) < 0) 2114 return (-1); 2115 goto nextrec; 2116 } 2117 2118 if (act == DTRACEACT_SYM) { 2119 if (dt_print_sym(dtp, fp, NULL, addr) < 0) 2120 return (-1); 2121 goto nextrec; 2122 } 2123 2124 if (act == DTRACEACT_MOD) { 2125 if (dt_print_mod(dtp, fp, NULL, addr) < 0) 2126 return (-1); 2127 goto nextrec; 2128 } 2129 2130 if (act == DTRACEACT_USYM || act == DTRACEACT_UADDR) { 2131 if (dt_print_usym(dtp, fp, addr, act) < 0) 2132 return (-1); 2133 goto nextrec; 2134 } 2135 2136 if (act == DTRACEACT_UMOD) { 2137 if (dt_print_umod(dtp, fp, NULL, addr) < 0) 2138 return (-1); 2139 goto nextrec; 2140 } 2141 2142 if (act == DTRACEACT_PRINTM) { 2143 if (dt_print_memory(dtp, fp, addr) < 0) 2144 return (-1); 2145 goto nextrec; 2146 } 2147 2148 if (act == DTRACEACT_PRINTT) { 2149 if (dt_print_type(dtp, fp, addr) < 0) 2150 return (-1); 2151 goto nextrec; 2152 } 2153 2154 if (DTRACEACT_ISPRINTFLIKE(act)) { 2155 void *fmtdata; 2156 int (*func)(dtrace_hdl_t *, FILE *, void *, 2157 const dtrace_probedata_t *, 2158 const dtrace_recdesc_t *, uint_t, 2159 const void *buf, size_t); 2160 2161 if ((fmtdata = dt_format_lookup(dtp, 2162 rec->dtrd_format)) == NULL) 2163 goto nofmt; 2164 2165 switch (act) { 2166 case DTRACEACT_PRINTF: 2167 func = dtrace_fprintf; 2168 break; 2169 case DTRACEACT_PRINTA: 2170 func = dtrace_fprinta; 2171 break; 2172 case DTRACEACT_SYSTEM: 2173 func = dtrace_system; 2174 break; 2175 case DTRACEACT_FREOPEN: 2176 func = dtrace_freopen; 2177 break; 2178 } 2179 2180 n = (*func)(dtp, fp, fmtdata, &data, 2181 rec, epd->dtepd_nrecs - i, 2182 (uchar_t *)buf->dtbd_data + offs, 2183 buf->dtbd_size - offs); 2184 2185 if (n < 0) 2186 return (-1); /* errno is set for us */ 2187 2188 if (n > 0) 2189 i += n - 1; 2190 goto nextrec; 2191 } 2192 2193 nofmt: 2194 if (act == DTRACEACT_PRINTA) { 2195 dt_print_aggdata_t pd; 2196 dtrace_aggvarid_t *aggvars; 2197 int j, naggvars = 0; 2198 size_t size = ((epd->dtepd_nrecs - i) * 2199 sizeof (dtrace_aggvarid_t)); 2200 2201 if ((aggvars = dt_alloc(dtp, size)) == NULL) 2202 return (-1); 2203 2204 /* 2205 * This might be a printa() with multiple 2206 * aggregation variables. We need to scan 2207 * forward through the records until we find 2208 * a record from a different statement. 2209 */ 2210 for (j = i; j < epd->dtepd_nrecs; j++) { 2211 dtrace_recdesc_t *nrec; 2212 caddr_t naddr; 2213 2214 nrec = &epd->dtepd_rec[j]; 2215 2216 if (nrec->dtrd_uarg != rec->dtrd_uarg) 2217 break; 2218 2219 if (nrec->dtrd_action != act) { 2220 return (dt_set_errno(dtp, 2221 EDT_BADAGG)); 2222 } 2223 2224 naddr = buf->dtbd_data + offs + 2225 nrec->dtrd_offset; 2226 2227 aggvars[naggvars++] = 2228 /* LINTED - alignment */ 2229 *((dtrace_aggvarid_t *)naddr); 2230 } 2231 2232 i = j - 1; 2233 bzero(&pd, sizeof (pd)); 2234 pd.dtpa_dtp = dtp; 2235 pd.dtpa_fp = fp; 2236 2237 assert(naggvars >= 1); 2238 2239 if (naggvars == 1) { 2240 pd.dtpa_id = aggvars[0]; 2241 dt_free(dtp, aggvars); 2242 2243 if (dt_printf(dtp, fp, "\n") < 0 || 2244 dtrace_aggregate_walk_sorted(dtp, 2245 dt_print_agg, &pd) < 0) 2246 return (-1); 2247 goto nextrec; 2248 } 2249 2250 if (dt_printf(dtp, fp, "\n") < 0 || 2251 dtrace_aggregate_walk_joined(dtp, aggvars, 2252 naggvars, dt_print_aggs, &pd) < 0) { 2253 dt_free(dtp, aggvars); 2254 return (-1); 2255 } 2256 2257 dt_free(dtp, aggvars); 2258 goto nextrec; 2259 } 2260 2261 switch (rec->dtrd_size) { 2262 case sizeof (uint64_t): 2263 n = dt_printf(dtp, fp, 2264 quiet ? "%lld" : " %16lld", 2265 /* LINTED - alignment */ 2266 *((unsigned long long *)addr)); 2267 break; 2268 case sizeof (uint32_t): 2269 n = dt_printf(dtp, fp, quiet ? "%d" : " %8d", 2270 /* LINTED - alignment */ 2271 *((uint32_t *)addr)); 2272 break; 2273 case sizeof (uint16_t): 2274 n = dt_printf(dtp, fp, quiet ? "%d" : " %5d", 2275 /* LINTED - alignment */ 2276 *((uint16_t *)addr)); 2277 break; 2278 case sizeof (uint8_t): 2279 n = dt_printf(dtp, fp, quiet ? "%d" : " %3d", 2280 *((uint8_t *)addr)); 2281 break; 2282 default: 2283 n = dt_print_bytes(dtp, fp, addr, 2284 rec->dtrd_size, 33, quiet, 0); 2285 break; 2286 } 2287 2288 if (n < 0) 2289 return (-1); /* errno is set for us */ 2290 2291 nextrec: 2292 if (dt_buffered_flush(dtp, &data, rec, NULL, 0) < 0) 2293 return (-1); /* errno is set for us */ 2294 } 2295 2296 /* 2297 * Call the record callback with a NULL record to indicate 2298 * that we're done processing this EPID. 2299 */ 2300 rval = (*rfunc)(&data, NULL, arg); 2301 nextepid: 2302 offs += epd->dtepd_size; 2303 last = id; 2304 } 2305 2306 if (buf->dtbd_oldest != 0 && start == buf->dtbd_oldest) { 2307 end = buf->dtbd_oldest; 2308 start = 0; 2309 goto again; 2310 } 2311 2312 if ((drops = buf->dtbd_drops) == 0) 2313 return (0); 2314 2315 /* 2316 * Explicitly zero the drops to prevent us from processing them again. 2317 */ 2318 buf->dtbd_drops = 0; 2319 2320 return (dt_handle_cpudrop(dtp, cpu, DTRACEDROP_PRINCIPAL, drops)); 2321 } 2322 2323 typedef struct dt_begin { 2324 dtrace_consume_probe_f *dtbgn_probefunc; 2325 dtrace_consume_rec_f *dtbgn_recfunc; 2326 void *dtbgn_arg; 2327 dtrace_handle_err_f *dtbgn_errhdlr; 2328 void *dtbgn_errarg; 2329 int dtbgn_beginonly; 2330 } dt_begin_t; 2331 2332 static int 2333 dt_consume_begin_probe(const dtrace_probedata_t *data, void *arg) 2334 { 2335 dt_begin_t *begin = (dt_begin_t *)arg; 2336 dtrace_probedesc_t *pd = data->dtpda_pdesc; 2337 2338 int r1 = (strcmp(pd->dtpd_provider, "dtrace") == 0); 2339 int r2 = (strcmp(pd->dtpd_name, "BEGIN") == 0); 2340 2341 if (begin->dtbgn_beginonly) { 2342 if (!(r1 && r2)) 2343 return (DTRACE_CONSUME_NEXT); 2344 } else { 2345 if (r1 && r2) 2346 return (DTRACE_CONSUME_NEXT); 2347 } 2348 2349 /* 2350 * We have a record that we're interested in. Now call the underlying 2351 * probe function... 2352 */ 2353 return (begin->dtbgn_probefunc(data, begin->dtbgn_arg)); 2354 } 2355 2356 static int 2357 dt_consume_begin_record(const dtrace_probedata_t *data, 2358 const dtrace_recdesc_t *rec, void *arg) 2359 { 2360 dt_begin_t *begin = (dt_begin_t *)arg; 2361 2362 return (begin->dtbgn_recfunc(data, rec, begin->dtbgn_arg)); 2363 } 2364 2365 static int 2366 dt_consume_begin_error(const dtrace_errdata_t *data, void *arg) 2367 { 2368 dt_begin_t *begin = (dt_begin_t *)arg; 2369 dtrace_probedesc_t *pd = data->dteda_pdesc; 2370 2371 int r1 = (strcmp(pd->dtpd_provider, "dtrace") == 0); 2372 int r2 = (strcmp(pd->dtpd_name, "BEGIN") == 0); 2373 2374 if (begin->dtbgn_beginonly) { 2375 if (!(r1 && r2)) 2376 return (DTRACE_HANDLE_OK); 2377 } else { 2378 if (r1 && r2) 2379 return (DTRACE_HANDLE_OK); 2380 } 2381 2382 return (begin->dtbgn_errhdlr(data, begin->dtbgn_errarg)); 2383 } 2384 2385 static int 2386 dt_consume_begin(dtrace_hdl_t *dtp, FILE *fp, dtrace_bufdesc_t *buf, 2387 dtrace_consume_probe_f *pf, dtrace_consume_rec_f *rf, void *arg) 2388 { 2389 /* 2390 * There's this idea that the BEGIN probe should be processed before 2391 * everything else, and that the END probe should be processed after 2392 * anything else. In the common case, this is pretty easy to deal 2393 * with. However, a situation may arise where the BEGIN enabling and 2394 * END enabling are on the same CPU, and some enabling in the middle 2395 * occurred on a different CPU. To deal with this (blech!) we need to 2396 * consume the BEGIN buffer up until the end of the BEGIN probe, and 2397 * then set it aside. We will then process every other CPU, and then 2398 * we'll return to the BEGIN CPU and process the rest of the data 2399 * (which will inevitably include the END probe, if any). Making this 2400 * even more complicated (!) is the library's ERROR enabling. Because 2401 * this enabling is processed before we even get into the consume call 2402 * back, any ERROR firing would result in the library's ERROR enabling 2403 * being processed twice -- once in our first pass (for BEGIN probes), 2404 * and again in our second pass (for everything but BEGIN probes). To 2405 * deal with this, we interpose on the ERROR handler to assure that we 2406 * only process ERROR enablings induced by BEGIN enablings in the 2407 * first pass, and that we only process ERROR enablings _not_ induced 2408 * by BEGIN enablings in the second pass. 2409 */ 2410 dt_begin_t begin; 2411 processorid_t cpu = dtp->dt_beganon; 2412 dtrace_bufdesc_t nbuf; 2413 #if !defined(sun) 2414 dtrace_bufdesc_t *pbuf; 2415 #endif 2416 int rval, i; 2417 static int max_ncpus; 2418 dtrace_optval_t size; 2419 2420 dtp->dt_beganon = -1; 2421 2422 #if defined(sun) 2423 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, buf) == -1) { 2424 #else 2425 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, &buf) == -1) { 2426 #endif 2427 /* 2428 * We really don't expect this to fail, but it is at least 2429 * technically possible for this to fail with ENOENT. In this 2430 * case, we just drive on... 2431 */ 2432 if (errno == ENOENT) 2433 return (0); 2434 2435 return (dt_set_errno(dtp, errno)); 2436 } 2437 2438 if (!dtp->dt_stopped || buf->dtbd_cpu != dtp->dt_endedon) { 2439 /* 2440 * This is the simple case. We're either not stopped, or if 2441 * we are, we actually processed any END probes on another 2442 * CPU. We can simply consume this buffer and return. 2443 */ 2444 return (dt_consume_cpu(dtp, fp, cpu, buf, pf, rf, arg)); 2445 } 2446 2447 begin.dtbgn_probefunc = pf; 2448 begin.dtbgn_recfunc = rf; 2449 begin.dtbgn_arg = arg; 2450 begin.dtbgn_beginonly = 1; 2451 2452 /* 2453 * We need to interpose on the ERROR handler to be sure that we 2454 * only process ERRORs induced by BEGIN. 2455 */ 2456 begin.dtbgn_errhdlr = dtp->dt_errhdlr; 2457 begin.dtbgn_errarg = dtp->dt_errarg; 2458 dtp->dt_errhdlr = dt_consume_begin_error; 2459 dtp->dt_errarg = &begin; 2460 2461 rval = dt_consume_cpu(dtp, fp, cpu, buf, dt_consume_begin_probe, 2462 dt_consume_begin_record, &begin); 2463 2464 dtp->dt_errhdlr = begin.dtbgn_errhdlr; 2465 dtp->dt_errarg = begin.dtbgn_errarg; 2466 2467 if (rval != 0) 2468 return (rval); 2469 2470 /* 2471 * Now allocate a new buffer. We'll use this to deal with every other 2472 * CPU. 2473 */ 2474 bzero(&nbuf, sizeof (dtrace_bufdesc_t)); 2475 (void) dtrace_getopt(dtp, "bufsize", &size); 2476 if ((nbuf.dtbd_data = malloc(size)) == NULL) 2477 return (dt_set_errno(dtp, EDT_NOMEM)); 2478 2479 if (max_ncpus == 0) 2480 max_ncpus = dt_sysconf(dtp, _SC_CPUID_MAX) + 1; 2481 2482 for (i = 0; i < max_ncpus; i++) { 2483 nbuf.dtbd_cpu = i; 2484 2485 if (i == cpu) 2486 continue; 2487 2488 #if defined(sun) 2489 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, &nbuf) == -1) { 2490 #else 2491 pbuf = &nbuf; 2492 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, &pbuf) == -1) { 2493 #endif 2494 /* 2495 * If we failed with ENOENT, it may be because the 2496 * CPU was unconfigured -- this is okay. Any other 2497 * error, however, is unexpected. 2498 */ 2499 if (errno == ENOENT) 2500 continue; 2501 2502 free(nbuf.dtbd_data); 2503 2504 return (dt_set_errno(dtp, errno)); 2505 } 2506 2507 if ((rval = dt_consume_cpu(dtp, fp, 2508 i, &nbuf, pf, rf, arg)) != 0) { 2509 free(nbuf.dtbd_data); 2510 return (rval); 2511 } 2512 } 2513 2514 free(nbuf.dtbd_data); 2515 2516 /* 2517 * Okay -- we're done with the other buffers. Now we want to 2518 * reconsume the first buffer -- but this time we're looking for 2519 * everything _but_ BEGIN. And of course, in order to only consume 2520 * those ERRORs _not_ associated with BEGIN, we need to reinstall our 2521 * ERROR interposition function... 2522 */ 2523 begin.dtbgn_beginonly = 0; 2524 2525 assert(begin.dtbgn_errhdlr == dtp->dt_errhdlr); 2526 assert(begin.dtbgn_errarg == dtp->dt_errarg); 2527 dtp->dt_errhdlr = dt_consume_begin_error; 2528 dtp->dt_errarg = &begin; 2529 2530 rval = dt_consume_cpu(dtp, fp, cpu, buf, dt_consume_begin_probe, 2531 dt_consume_begin_record, &begin); 2532 2533 dtp->dt_errhdlr = begin.dtbgn_errhdlr; 2534 dtp->dt_errarg = begin.dtbgn_errarg; 2535 2536 return (rval); 2537 } 2538 2539 int 2540 dtrace_consume(dtrace_hdl_t *dtp, FILE *fp, 2541 dtrace_consume_probe_f *pf, dtrace_consume_rec_f *rf, void *arg) 2542 { 2543 dtrace_bufdesc_t *buf = &dtp->dt_buf; 2544 dtrace_optval_t size; 2545 static int max_ncpus; 2546 int i, rval; 2547 dtrace_optval_t interval = dtp->dt_options[DTRACEOPT_SWITCHRATE]; 2548 hrtime_t now = gethrtime(); 2549 2550 if (dtp->dt_lastswitch != 0) { 2551 if (now - dtp->dt_lastswitch < interval) 2552 return (0); 2553 2554 dtp->dt_lastswitch += interval; 2555 } else { 2556 dtp->dt_lastswitch = now; 2557 } 2558 2559 if (!dtp->dt_active) 2560 return (dt_set_errno(dtp, EINVAL)); 2561 2562 if (max_ncpus == 0) 2563 max_ncpus = dt_sysconf(dtp, _SC_CPUID_MAX) + 1; 2564 2565 if (pf == NULL) 2566 pf = (dtrace_consume_probe_f *)dt_nullprobe; 2567 2568 if (rf == NULL) 2569 rf = (dtrace_consume_rec_f *)dt_nullrec; 2570 2571 if (buf->dtbd_data == NULL) { 2572 (void) dtrace_getopt(dtp, "bufsize", &size); 2573 if ((buf->dtbd_data = malloc(size)) == NULL) 2574 return (dt_set_errno(dtp, EDT_NOMEM)); 2575 2576 buf->dtbd_size = size; 2577 } 2578 2579 /* 2580 * If we have just begun, we want to first process the CPU that 2581 * executed the BEGIN probe (if any). 2582 */ 2583 if (dtp->dt_active && dtp->dt_beganon != -1) { 2584 buf->dtbd_cpu = dtp->dt_beganon; 2585 if ((rval = dt_consume_begin(dtp, fp, buf, pf, rf, arg)) != 0) 2586 return (rval); 2587 } 2588 2589 for (i = 0; i < max_ncpus; i++) { 2590 buf->dtbd_cpu = i; 2591 2592 /* 2593 * If we have stopped, we want to process the CPU on which the 2594 * END probe was processed only _after_ we have processed 2595 * everything else. 2596 */ 2597 if (dtp->dt_stopped && (i == dtp->dt_endedon)) 2598 continue; 2599 2600 #if defined(sun) 2601 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, buf) == -1) { 2602 #else 2603 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, &buf) == -1) { 2604 #endif 2605 /* 2606 * If we failed with ENOENT, it may be because the 2607 * CPU was unconfigured -- this is okay. Any other 2608 * error, however, is unexpected. 2609 */ 2610 if (errno == ENOENT) 2611 continue; 2612 2613 return (dt_set_errno(dtp, errno)); 2614 } 2615 2616 if ((rval = dt_consume_cpu(dtp, fp, i, buf, pf, rf, arg)) != 0) 2617 return (rval); 2618 } 2619 2620 if (!dtp->dt_stopped) 2621 return (0); 2622 2623 buf->dtbd_cpu = dtp->dt_endedon; 2624 2625 #if defined(sun) 2626 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, buf) == -1) { 2627 #else 2628 if (dt_ioctl(dtp, DTRACEIOC_BUFSNAP, &buf) == -1) { 2629 #endif 2630 /* 2631 * This _really_ shouldn't fail, but it is strictly speaking 2632 * possible for this to return ENOENT if the CPU that called 2633 * the END enabling somehow managed to become unconfigured. 2634 * It's unclear how the user can possibly expect anything 2635 * rational to happen in this case -- the state has been thrown 2636 * out along with the unconfigured CPU -- so we'll just drive 2637 * on... 2638 */ 2639 if (errno == ENOENT) 2640 return (0); 2641 2642 return (dt_set_errno(dtp, errno)); 2643 } 2644 2645 return (dt_consume_cpu(dtp, fp, dtp->dt_endedon, buf, pf, rf, arg)); 2646 } 2647