1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1992 Keith Muller. 5 * Copyright (c) 1992, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * Keith Muller of the University of California, San Diego. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36 #if 0 37 #ifndef lint 38 static char const copyright[] = 39 "@(#) Copyright (c) 1992, 1993\n\ 40 The Regents of the University of California. All rights reserved.\n"; 41 #endif /* not lint */ 42 43 #ifndef lint 44 static char sccsid[] = "@(#)pax.c 8.2 (Berkeley) 4/18/94"; 45 #endif /* not lint */ 46 #endif 47 #include <sys/cdefs.h> 48 __FBSDID("$FreeBSD$"); 49 50 #include <sys/types.h> 51 #include <sys/stat.h> 52 #include <sys/time.h> 53 #include <sys/resource.h> 54 #include <err.h> 55 #include <errno.h> 56 #include <fcntl.h> 57 #include <locale.h> 58 #include <paths.h> 59 #include <signal.h> 60 #include <stdio.h> 61 #include <stdlib.h> 62 #include <string.h> 63 #include "pax.h" 64 #include "extern.h" 65 static int gen_init(void); 66 67 /* 68 * PAX main routines, general globals and some simple start up routines 69 */ 70 71 /* 72 * Variables that can be accessed by any routine within pax 73 */ 74 int act = DEFOP; /* read/write/append/copy */ 75 FSUB *frmt = NULL; /* archive format type */ 76 int cflag; /* match all EXCEPT pattern/file */ 77 int cwdfd; /* starting cwd */ 78 int dflag; /* directory member match only */ 79 int iflag; /* interactive file/archive rename */ 80 int kflag; /* do not overwrite existing files */ 81 int lflag; /* use hard links when possible */ 82 int nflag; /* select first archive member match */ 83 int tflag; /* restore access time after read */ 84 int uflag; /* ignore older modification time files */ 85 int vflag; /* produce verbose output */ 86 int Dflag; /* same as uflag except inode change time */ 87 int Hflag; /* follow command line symlinks (write only) */ 88 int Lflag; /* follow symlinks when writing */ 89 int Oflag; /* limit to single volume */ 90 int Xflag; /* archive files with same device id only */ 91 int Yflag; /* same as Dflg except after name mode */ 92 int Zflag; /* same as uflg except after name mode */ 93 int vfpart; /* is partial verbose output in progress */ 94 int patime = 1; /* preserve file access time */ 95 int pmtime = 1; /* preserve file modification times */ 96 int nodirs; /* do not create directories as needed */ 97 int pmode; /* preserve file mode bits */ 98 int pids; /* preserve file uid/gid */ 99 int rmleadslash = 0; /* remove leading '/' from pathnames */ 100 int exit_val; /* exit value */ 101 int docrc; /* check/create file crc */ 102 char *dirptr; /* destination dir in a copy */ 103 const char *argv0; /* root of argv[0] */ 104 sigset_t s_mask; /* signal mask for cleanup critical sect */ 105 FILE *listf; /* file pointer to print file list to */ 106 char *tempfile; /* tempfile to use for mkstemp(3) */ 107 char *tempbase; /* basename of tempfile to use for mkstemp(3) */ 108 109 /* 110 * PAX - Portable Archive Interchange 111 * 112 * A utility to read, write, and write lists of the members of archive 113 * files and copy directory hierarchies. A variety of archive formats 114 * are supported (some are described in POSIX 1003.1 10.1): 115 * 116 * ustar - 10.1.1 extended tar interchange format 117 * cpio - 10.1.2 extended cpio interchange format 118 * tar - old BSD 4.3 tar format 119 * binary cpio - old cpio with binary header format 120 * sysVR4 cpio - with and without CRC 121 * 122 * This version is a superset of IEEE Std 1003.2b-d3 123 * 124 * Summary of Extensions to the IEEE Standard: 125 * 126 * 1 READ ENHANCEMENTS 127 * 1.1 Operations which read archives will continue to operate even when 128 * processing archives which may be damaged, truncated, or fail to meet 129 * format specs in several different ways. Damaged sections of archives 130 * are detected and avoided if possible. Attempts will be made to resync 131 * archive read operations even with badly damaged media. 132 * 1.2 Blocksize requirements are not strictly enforced on archive read. 133 * Tapes which have variable sized records can be read without errors. 134 * 1.3 The user can specify via the non-standard option flag -E if error 135 * resync operation should stop on a media error, try a specified number 136 * of times to correct, or try to correct forever. 137 * 1.4 Sparse files (lseek holes) stored on the archive (but stored with blocks 138 * of all zeros will be restored with holes appropriate for the target 139 * file system 140 * 1.5 The user is notified whenever something is found during archive 141 * read operations which violates spec (but the read will continue). 142 * 1.6 Multiple archive volumes can be read and may span over different 143 * archive devices 144 * 1.7 Rigidly restores all file attributes exactly as they are stored on the 145 * archive. 146 * 1.8 Modification change time ranges can be specified via multiple -T 147 * options. These allow a user to select files whose modification time 148 * lies within a specific time range. 149 * 1.9 Files can be selected based on owner (user name or uid) via one or more 150 * -U options. 151 * 1.10 Files can be selected based on group (group name or gid) via one o 152 * more -G options. 153 * 1.11 File modification time can be checked against existing file after 154 * name modification (-Z) 155 * 156 * 2 WRITE ENHANCEMENTS 157 * 2.1 Write operation will stop instead of allowing a user to create a flawed 158 * flawed archive (due to any problem). 159 * 2.2 Archives written by pax are forced to strictly conform to both the 160 * archive and pax the specific format specifications. 161 * 2.3 Blocking size and format is rigidly enforced on writes. 162 * 2.4 Formats which may exhibit header overflow problems (they have fields 163 * too small for large file systems, such as inode number storage), use 164 * routines designed to repair this problem. These techniques still 165 * conform to both pax and format specifications, but no longer truncate 166 * these fields. This removes any restrictions on using these archive 167 * formats on large file systems. 168 * 2.5 Multiple archive volumes can be written and may span over different 169 * archive devices 170 * 2.6 A archive volume record limit allows the user to specify the number 171 * of bytes stored on an archive volume. When reached the user is 172 * prompted for the next archive volume. This is specified with the 173 * non-standard -B flag. The limit is rounded up to the next blocksize. 174 * 2.7 All archive padding during write use zero filled sections. This makes 175 * it much easier to pull data out of flawed archive during read 176 * operations. 177 * 2.8 Access time reset with the -t applies to all file nodes (including 178 * directories). 179 * 2.9 Symbolic links can be followed with -L (optional in the spec). 180 * 2.10 Modification or inode change time ranges can be specified via 181 * multiple -T options. These allow a user to select files whose 182 * modification or inode change time lies within a specific time range. 183 * 2.11 Files can be selected based on owner (user name or uid) via one or more 184 * -U options. 185 * 2.12 Files can be selected based on group (group name or gid) via one o 186 * more -G options. 187 * 2.13 Symlinks which appear on the command line can be followed (without 188 * following other symlinks; -H flag) 189 * 190 * 3 COPY ENHANCEMENTS 191 * 3.1 Sparse files (lseek holes) can be copied without expanding the holes 192 * into zero filled blocks. The file copy is created with holes which are 193 * appropriate for the target file system 194 * 3.2 Access time as well as modification time on copied file trees can be 195 * preserved with the appropriate -p options. 196 * 3.3 Access time reset with the -t applies to all file nodes (including 197 * directories). 198 * 3.4 Symbolic links can be followed with -L (optional in the spec). 199 * 3.5 Modification or inode change time ranges can be specified via 200 * multiple -T options. These allow a user to select files whose 201 * modification or inode change time lies within a specific time range. 202 * 3.6 Files can be selected based on owner (user name or uid) via one or more 203 * -U options. 204 * 3.7 Files can be selected based on group (group name or gid) via one o 205 * more -G options. 206 * 3.8 Symlinks which appear on the command line can be followed (without 207 * following other symlinks; -H flag) 208 * 3.9 File inode change time can be checked against existing file before 209 * name modification (-D) 210 * 3.10 File inode change time can be checked against existing file after 211 * name modification (-Y) 212 * 3.11 File modification time can be checked against existing file after 213 * name modification (-Z) 214 * 215 * 4 GENERAL ENHANCEMENTS 216 * 4.1 Internal structure is designed to isolate format dependent and 217 * independent functions. Formats are selected via a format driver table. 218 * This encourages the addition of new archive formats by only having to 219 * write those routines which id, read and write the archive header. 220 */ 221 222 /* 223 * main() 224 * parse options, set up and operate as specified by the user. 225 * any operational flaw will set exit_val to non-zero 226 * Return: 0 if ok, 1 otherwise 227 */ 228 229 int 230 main(int argc, char *argv[]) 231 { 232 const char *tmpdir; 233 size_t tdlen; 234 235 (void) setlocale(LC_ALL, ""); 236 listf = stderr; 237 /* 238 * Keep a reference to cwd, so we can always come back home. 239 */ 240 cwdfd = open(".", O_RDONLY); 241 if (cwdfd < 0) { 242 syswarn(0, errno, "Can't open current working directory."); 243 return(exit_val); 244 } 245 246 /* 247 * Where should we put temporary files? 248 */ 249 if ((tmpdir = getenv("TMPDIR")) == NULL || *tmpdir == '\0') 250 tmpdir = _PATH_TMP; 251 tdlen = strlen(tmpdir); 252 while(tdlen > 0 && tmpdir[tdlen - 1] == '/') 253 tdlen--; 254 tempfile = malloc(tdlen + 1 + sizeof(_TFILE_BASE)); 255 if (tempfile == NULL) { 256 paxwarn(1, "Cannot allocate memory for temp file name."); 257 return(exit_val); 258 } 259 if (tdlen) 260 memcpy(tempfile, tmpdir, tdlen); 261 tempbase = tempfile + tdlen; 262 *tempbase++ = '/'; 263 264 /* 265 * parse options, determine operational mode, general init 266 */ 267 options(argc, argv); 268 if ((gen_init() < 0) || (tty_init() < 0)) 269 return(exit_val); 270 271 /* 272 * select a primary operation mode 273 */ 274 switch(act) { 275 case EXTRACT: 276 extract(); 277 break; 278 case ARCHIVE: 279 archive(); 280 break; 281 case APPND: 282 if (gzip_program != NULL) 283 err(1, "can not gzip while appending"); 284 append(); 285 break; 286 case COPY: 287 copy(); 288 break; 289 default: 290 case LIST: 291 list(); 292 break; 293 } 294 return(exit_val); 295 } 296 297 /* 298 * sig_cleanup() 299 * when interrupted we try to do whatever delayed processing we can. 300 * This is not critical, but we really ought to limit our damage when we 301 * are aborted by the user. 302 * Return: 303 * never.... 304 */ 305 306 void 307 sig_cleanup(int which_sig) 308 { 309 /* 310 * restore modes and times for any dirs we may have created 311 * or any dirs we may have read. Set vflag and vfpart so the user 312 * will clearly see the message on a line by itself. 313 */ 314 vflag = vfpart = 1; 315 if (which_sig == SIGXCPU) 316 paxwarn(0, "Cpu time limit reached, cleaning up."); 317 else 318 paxwarn(0, "Signal caught, cleaning up."); 319 320 ar_close(); 321 proc_dir(); 322 if (tflag) 323 atdir_end(); 324 exit(1); 325 } 326 327 /* 328 * gen_init() 329 * general setup routines. Not all are required, but they really help 330 * when dealing with a medium to large sized archives. 331 */ 332 333 static int 334 gen_init(void) 335 { 336 struct rlimit reslimit; 337 struct sigaction n_hand; 338 struct sigaction o_hand; 339 340 /* 341 * Really needed to handle large archives. We can run out of memory for 342 * internal tables really fast when we have a whole lot of files... 343 */ 344 if (getrlimit(RLIMIT_DATA , &reslimit) == 0){ 345 reslimit.rlim_cur = reslimit.rlim_max; 346 (void)setrlimit(RLIMIT_DATA , &reslimit); 347 } 348 349 /* 350 * should file size limits be waived? if the os limits us, this is 351 * needed if we want to write a large archive 352 */ 353 if (getrlimit(RLIMIT_FSIZE , &reslimit) == 0){ 354 reslimit.rlim_cur = reslimit.rlim_max; 355 (void)setrlimit(RLIMIT_FSIZE , &reslimit); 356 } 357 358 /* 359 * increase the size the stack can grow to 360 */ 361 if (getrlimit(RLIMIT_STACK , &reslimit) == 0){ 362 reslimit.rlim_cur = reslimit.rlim_max; 363 (void)setrlimit(RLIMIT_STACK , &reslimit); 364 } 365 366 /* 367 * not really needed, but doesn't hurt 368 */ 369 if (getrlimit(RLIMIT_RSS , &reslimit) == 0){ 370 reslimit.rlim_cur = reslimit.rlim_max; 371 (void)setrlimit(RLIMIT_RSS , &reslimit); 372 } 373 374 /* 375 * signal handling to reset stored directory times and modes. Since 376 * we deal with broken pipes via failed writes we ignore it. We also 377 * deal with any file size limit thorough failed writes. Cpu time 378 * limits are caught and a cleanup is forced. 379 */ 380 if ((sigemptyset(&s_mask) < 0) || (sigaddset(&s_mask, SIGTERM) < 0) || 381 (sigaddset(&s_mask,SIGINT) < 0)||(sigaddset(&s_mask,SIGHUP) < 0) || 382 (sigaddset(&s_mask,SIGPIPE) < 0)||(sigaddset(&s_mask,SIGQUIT)<0) || 383 (sigaddset(&s_mask,SIGXCPU) < 0)||(sigaddset(&s_mask,SIGXFSZ)<0)) { 384 paxwarn(1, "Unable to set up signal mask"); 385 return(-1); 386 } 387 memset(&n_hand, 0, sizeof n_hand); 388 n_hand.sa_mask = s_mask; 389 n_hand.sa_flags = 0; 390 n_hand.sa_handler = sig_cleanup; 391 392 if ((sigaction(SIGHUP, &n_hand, &o_hand) < 0) && 393 (o_hand.sa_handler == SIG_IGN) && 394 (sigaction(SIGHUP, &o_hand, &o_hand) < 0)) 395 goto out; 396 397 if ((sigaction(SIGTERM, &n_hand, &o_hand) < 0) && 398 (o_hand.sa_handler == SIG_IGN) && 399 (sigaction(SIGTERM, &o_hand, &o_hand) < 0)) 400 goto out; 401 402 if ((sigaction(SIGINT, &n_hand, &o_hand) < 0) && 403 (o_hand.sa_handler == SIG_IGN) && 404 (sigaction(SIGINT, &o_hand, &o_hand) < 0)) 405 goto out; 406 407 if ((sigaction(SIGQUIT, &n_hand, &o_hand) < 0) && 408 (o_hand.sa_handler == SIG_IGN) && 409 (sigaction(SIGQUIT, &o_hand, &o_hand) < 0)) 410 goto out; 411 412 if ((sigaction(SIGXCPU, &n_hand, &o_hand) < 0) && 413 (o_hand.sa_handler == SIG_IGN) && 414 (sigaction(SIGXCPU, &o_hand, &o_hand) < 0)) 415 goto out; 416 417 n_hand.sa_handler = SIG_IGN; 418 if ((sigaction(SIGPIPE, &n_hand, &o_hand) < 0) || 419 (sigaction(SIGXFSZ, &n_hand, &o_hand) < 0)) 420 goto out; 421 return(0); 422 423 out: 424 syswarn(1, errno, "Unable to set up signal handler"); 425 return(-1); 426 } 427