1 /*- 2 * Copyright (c) 1992 Keith Muller. 3 * Copyright (c) 1992, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * Keith Muller of the University of California, San Diego. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 #ifndef lint 35 #if 0 36 static char sccsid[] = "@(#)ftree.c 8.2 (Berkeley) 4/18/94"; 37 #endif 38 #endif /* not lint */ 39 #include <sys/cdefs.h> 40 __FBSDID("$FreeBSD$"); 41 42 #include <sys/types.h> 43 #include <sys/time.h> 44 #include <sys/stat.h> 45 #include <unistd.h> 46 #include <string.h> 47 #include <stdio.h> 48 #include <errno.h> 49 #include <stdlib.h> 50 #include <fts.h> 51 #include "pax.h" 52 #include "ftree.h" 53 #include "extern.h" 54 55 /* 56 * routines to interface with the fts library function. 57 * 58 * file args supplied to pax are stored on a single linked list (of type FTREE) 59 * and given to fts to be processed one at a time. pax "selects" files from 60 * the expansion of each arg into the corresponding file tree (if the arg is a 61 * directory, otherwise the node itself is just passed to pax). The selection 62 * is modified by the -n and -u flags. The user is informed when a specific 63 * file arg does not generate any selected files. -n keeps expanding the file 64 * tree arg until one of its files is selected, then skips to the next file 65 * arg. when the user does not supply the file trees as command line args to 66 * pax, they are read from stdin 67 */ 68 69 static FTS *ftsp = NULL; /* current FTS handle */ 70 static int ftsopts; /* options to be used on fts_open */ 71 static char *farray[2]; /* array for passing each arg to fts */ 72 static FTREE *fthead = NULL; /* head of linked list of file args */ 73 static FTREE *fttail = NULL; /* tail of linked list of file args */ 74 static FTREE *ftcur = NULL; /* current file arg being processed */ 75 static FTSENT *ftent = NULL; /* current file tree entry */ 76 static int ftree_skip; /* when set skip to next file arg */ 77 78 static int ftree_arg(void); 79 80 /* 81 * ftree_start() 82 * initialize the options passed to fts_open() during this run of pax 83 * options are based on the selection of pax options by the user 84 * fts_start() also calls fts_arg() to open the first valid file arg. We 85 * also attempt to reset directory access times when -t (tflag) is set. 86 * Return: 87 * 0 if there is at least one valid file arg to process, -1 otherwise 88 */ 89 90 int 91 ftree_start(void) 92 { 93 /* 94 * Set up the operation mode of fts, open the first file arg. We must 95 * use FTS_NOCHDIR, as the user may have to open multiple archives and 96 * if fts did a chdir off into the boondocks, we may create an archive 97 * volume in a place where the user did not expect to. 98 */ 99 ftsopts = FTS_NOCHDIR; 100 101 /* 102 * optional user flags that effect file traversal 103 * -H command line symlink follow only (half follow) 104 * -L follow symlinks (logical) 105 * -P do not follow symlinks (physical). This is the default. 106 * -X do not cross over mount points 107 * -t preserve access times on files read. 108 * -n select only the first member of a file tree when a match is found 109 * -d do not extract subtrees rooted at a directory arg. 110 */ 111 if (Lflag) 112 ftsopts |= FTS_LOGICAL; 113 else 114 ftsopts |= FTS_PHYSICAL; 115 if (Hflag) 116 # ifdef NET2_FTS 117 paxwarn(0, "The -H flag is not supported on this version"); 118 # else 119 ftsopts |= FTS_COMFOLLOW; 120 # endif 121 if (Xflag) 122 ftsopts |= FTS_XDEV; 123 124 if ((fthead == NULL) && ((farray[0] = malloc(PAXPATHLEN+2)) == NULL)) { 125 paxwarn(1, "Unable to allocate memory for file name buffer"); 126 return(-1); 127 } 128 129 if (ftree_arg() < 0) 130 return(-1); 131 if (tflag && (atdir_start() < 0)) 132 return(-1); 133 return(0); 134 } 135 136 /* 137 * ftree_add() 138 * add the arg to the linked list of files to process. Each will be 139 * processed by fts one at a time 140 * Return: 141 * 0 if added to the linked list, -1 if failed 142 */ 143 144 int 145 ftree_add(char *str, int chflg) 146 { 147 FTREE *ft; 148 int len; 149 150 /* 151 * simple check for bad args 152 */ 153 if ((str == NULL) || (*str == '\0')) { 154 paxwarn(0, "Invalid file name argument"); 155 return(-1); 156 } 157 158 /* 159 * allocate FTREE node and add to the end of the linked list (args are 160 * processed in the same order they were passed to pax). Get rid of any 161 * trailing / the user may pass us. (watch out for / by itself). 162 */ 163 if ((ft = (FTREE *)malloc(sizeof(FTREE))) == NULL) { 164 paxwarn(0, "Unable to allocate memory for filename"); 165 return(-1); 166 } 167 168 if (((len = strlen(str) - 1) > 0) && (str[len] == '/')) 169 str[len] = '\0'; 170 ft->fname = str; 171 ft->refcnt = 0; 172 ft->chflg = chflg; 173 ft->fow = NULL; 174 if (fthead == NULL) { 175 fttail = fthead = ft; 176 return(0); 177 } 178 fttail->fow = ft; 179 fttail = ft; 180 return(0); 181 } 182 183 /* 184 * ftree_sel() 185 * this entry has been selected by pax. bump up reference count and handle 186 * -n and -d processing. 187 */ 188 189 void 190 ftree_sel(ARCHD *arcn) 191 { 192 /* 193 * set reference bit for this pattern. This linked list is only used 194 * when file trees are supplied pax as args. The list is not used when 195 * the trees are read from stdin. 196 */ 197 if (ftcur != NULL) 198 ftcur->refcnt = 1; 199 200 /* 201 * if -n we are done with this arg, force a skip to the next arg when 202 * pax asks for the next file in next_file(). 203 * if -d we tell fts only to match the directory (if the arg is a dir) 204 * and not the entire file tree rooted at that point. 205 */ 206 if (nflag) 207 ftree_skip = 1; 208 209 if (!dflag || (arcn->type != PAX_DIR)) 210 return; 211 212 if (ftent != NULL) 213 (void)fts_set(ftsp, ftent, FTS_SKIP); 214 } 215 216 /* 217 * ftree_notsel() 218 * this entry has not been selected by pax. 219 */ 220 221 void 222 ftree_notsel(void) 223 { 224 if (ftent != NULL) 225 (void)fts_set(ftsp, ftent, FTS_SKIP); 226 } 227 228 /* 229 * ftree_chk() 230 * called at end on pax execution. Prints all those file args that did not 231 * have a selected member (reference count still 0) 232 */ 233 234 void 235 ftree_chk(void) 236 { 237 FTREE *ft; 238 int wban = 0; 239 240 /* 241 * make sure all dir access times were reset. 242 */ 243 if (tflag) 244 atdir_end(); 245 246 /* 247 * walk down list and check reference count. Print out those members 248 * that never had a match 249 */ 250 for (ft = fthead; ft != NULL; ft = ft->fow) { 251 if ((ft->refcnt > 0) || ft->chflg) 252 continue; 253 if (wban == 0) { 254 paxwarn(1,"WARNING! These file names were not selected:"); 255 ++wban; 256 } 257 (void)fprintf(stderr, "%s\n", ft->fname); 258 } 259 } 260 261 /* 262 * ftree_arg() 263 * Get the next file arg for fts to process. Can be from either the linked 264 * list or read from stdin when the user did not them as args to pax. Each 265 * arg is processed until the first successful fts_open(). 266 * Return: 267 * 0 when the next arg is ready to go, -1 if out of file args (or EOF on 268 * stdin). 269 */ 270 271 static int 272 ftree_arg(void) 273 { 274 char *pt; 275 276 /* 277 * close off the current file tree 278 */ 279 if (ftsp != NULL) { 280 (void)fts_close(ftsp); 281 ftsp = NULL; 282 } 283 284 /* 285 * keep looping until we get a valid file tree to process. Stop when we 286 * reach the end of the list (or get an eof on stdin) 287 */ 288 for(;;) { 289 if (fthead == NULL) { 290 /* 291 * the user didn't supply any args, get the file trees 292 * to process from stdin; 293 */ 294 if (fgets(farray[0], PAXPATHLEN+1, stdin) == NULL) 295 return(-1); 296 if ((pt = strchr(farray[0], '\n')) != NULL) 297 *pt = '\0'; 298 } else { 299 /* 300 * the user supplied the file args as arguments to pax 301 */ 302 if (ftcur == NULL) 303 ftcur = fthead; 304 else if ((ftcur = ftcur->fow) == NULL) 305 return(-1); 306 if (ftcur->chflg) { 307 /* First fchdir() back... */ 308 if (fchdir(cwdfd) < 0) { 309 syswarn(1, errno, 310 "Can't fchdir to starting directory"); 311 return(-1); 312 } 313 if (chdir(ftcur->fname) < 0) { 314 syswarn(1, errno, "Can't chdir to %s", 315 ftcur->fname); 316 return(-1); 317 } 318 continue; 319 } else 320 farray[0] = ftcur->fname; 321 } 322 323 /* 324 * Watch it, fts wants the file arg stored in an array of char 325 * ptrs, with the last one a null. We use a two element array 326 * and set farray[0] to point at the buffer with the file name 327 * in it. We cannot pass all the file args to fts at one shot 328 * as we need to keep a handle on which file arg generates what 329 * files (the -n and -d flags need this). If the open is 330 * successful, return a 0. 331 */ 332 if ((ftsp = fts_open(farray, ftsopts, NULL)) != NULL) 333 break; 334 } 335 return(0); 336 } 337 338 /* 339 * next_file() 340 * supplies the next file to process in the supplied archd structure. 341 * Return: 342 * 0 when contents of arcn have been set with the next file, -1 when done. 343 */ 344 345 int 346 next_file(ARCHD *arcn) 347 { 348 int cnt; 349 time_t atime; 350 time_t mtime; 351 352 /* 353 * ftree_sel() might have set the ftree_skip flag if the user has the 354 * -n option and a file was selected from this file arg tree. (-n says 355 * only one member is matched for each pattern) ftree_skip being 1 356 * forces us to go to the next arg now. 357 */ 358 if (ftree_skip) { 359 /* 360 * clear and go to next arg 361 */ 362 ftree_skip = 0; 363 if (ftree_arg() < 0) 364 return(-1); 365 } 366 367 /* 368 * loop until we get a valid file to process 369 */ 370 for(;;) { 371 if ((ftent = fts_read(ftsp)) == NULL) { 372 /* 373 * out of files in this tree, go to next arg, if none 374 * we are done 375 */ 376 if (ftree_arg() < 0) 377 return(-1); 378 continue; 379 } 380 381 /* 382 * handle each type of fts_read() flag 383 */ 384 switch(ftent->fts_info) { 385 case FTS_D: 386 case FTS_DEFAULT: 387 case FTS_F: 388 case FTS_SL: 389 case FTS_SLNONE: 390 /* 391 * these are all ok 392 */ 393 break; 394 case FTS_DP: 395 /* 396 * already saw this directory. If the user wants file 397 * access times reset, we use this to restore the 398 * access time for this directory since this is the 399 * last time we will see it in this file subtree 400 * remember to force the time (this is -t on a read 401 * directory, not a created directory). 402 */ 403 # ifdef NET2_FTS 404 if (!tflag || (get_atdir(ftent->fts_statb.st_dev, 405 ftent->fts_statb.st_ino, &mtime, &atime) < 0)) 406 # else 407 if (!tflag || (get_atdir(ftent->fts_statp->st_dev, 408 ftent->fts_statp->st_ino, &mtime, &atime) < 0)) 409 # endif 410 continue; 411 set_ftime(ftent->fts_path, mtime, atime, 1); 412 continue; 413 case FTS_DC: 414 /* 415 * fts claims a file system cycle 416 */ 417 paxwarn(1,"File system cycle found at %s",ftent->fts_path); 418 continue; 419 case FTS_DNR: 420 # ifdef NET2_FTS 421 syswarn(1, errno, 422 # else 423 syswarn(1, ftent->fts_errno, 424 # endif 425 "Unable to read directory %s", ftent->fts_path); 426 continue; 427 case FTS_ERR: 428 # ifdef NET2_FTS 429 syswarn(1, errno, 430 # else 431 syswarn(1, ftent->fts_errno, 432 # endif 433 "File system traversal error"); 434 continue; 435 case FTS_NS: 436 case FTS_NSOK: 437 # ifdef NET2_FTS 438 syswarn(1, errno, 439 # else 440 syswarn(1, ftent->fts_errno, 441 # endif 442 "Unable to access %s", ftent->fts_path); 443 continue; 444 } 445 446 /* 447 * ok got a file tree node to process. copy info into arcn 448 * structure (initialize as required) 449 */ 450 arcn->skip = 0; 451 arcn->pad = 0; 452 arcn->ln_nlen = 0; 453 arcn->ln_name[0] = '\0'; 454 # ifdef NET2_FTS 455 arcn->sb = ftent->fts_statb; 456 # else 457 arcn->sb = *(ftent->fts_statp); 458 # endif 459 460 /* 461 * file type based set up and copy into the arcn struct 462 * SIDE NOTE: 463 * we try to reset the access time on all files and directories 464 * we may read when the -t flag is specified. files are reset 465 * when we close them after copying. we reset the directories 466 * when we are done with their file tree (we also clean up at 467 * end in case we cut short a file tree traversal). However 468 * there is no way to reset access times on symlinks. 469 */ 470 switch(S_IFMT & arcn->sb.st_mode) { 471 case S_IFDIR: 472 arcn->type = PAX_DIR; 473 if (!tflag) 474 break; 475 add_atdir(ftent->fts_path, arcn->sb.st_dev, 476 arcn->sb.st_ino, arcn->sb.st_mtime, 477 arcn->sb.st_atime); 478 break; 479 case S_IFCHR: 480 arcn->type = PAX_CHR; 481 break; 482 case S_IFBLK: 483 arcn->type = PAX_BLK; 484 break; 485 case S_IFREG: 486 /* 487 * only regular files with have data to store on the 488 * archive. all others will store a zero length skip. 489 * the skip field is used by pax for actual data it has 490 * to read (or skip over). 491 */ 492 arcn->type = PAX_REG; 493 arcn->skip = arcn->sb.st_size; 494 break; 495 case S_IFLNK: 496 arcn->type = PAX_SLK; 497 /* 498 * have to read the symlink path from the file 499 */ 500 if ((cnt = readlink(ftent->fts_path, arcn->ln_name, 501 PAXPATHLEN - 1)) < 0) { 502 syswarn(1, errno, "Unable to read symlink %s", 503 ftent->fts_path); 504 continue; 505 } 506 /* 507 * set link name length, watch out readlink does not 508 * always NUL terminate the link path 509 */ 510 arcn->ln_name[cnt] = '\0'; 511 arcn->ln_nlen = cnt; 512 break; 513 case S_IFSOCK: 514 /* 515 * under BSD storing a socket is senseless but we will 516 * let the format specific write function make the 517 * decision of what to do with it. 518 */ 519 arcn->type = PAX_SCK; 520 break; 521 case S_IFIFO: 522 arcn->type = PAX_FIF; 523 break; 524 } 525 break; 526 } 527 528 /* 529 * copy file name, set file name length 530 */ 531 arcn->nlen = l_strncpy(arcn->name, ftent->fts_path, sizeof(arcn->name) - 1); 532 arcn->name[arcn->nlen] = '\0'; 533 arcn->org_name = ftent->fts_path; 534 return(0); 535 } 536