xref: /freebsd/bin/pax/cpio.c (revision e32fecd0c2c3ee37c47ee100f169e7eb0282a873)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 1992 Keith Muller.
5  * Copyright (c) 1992, 1993
6  *	The Regents of the University of California.  All rights reserved.
7  *
8  * This code is derived from software contributed to Berkeley by
9  * Keith Muller of the University of California, San Diego.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. Neither the name of the University nor the names of its contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  */
35 
36 #ifndef lint
37 #if 0
38 static char sccsid[] = "@(#)cpio.c	8.1 (Berkeley) 5/31/93";
39 #endif
40 #endif /* not lint */
41 #include <sys/cdefs.h>
42 __FBSDID("$FreeBSD$");
43 
44 #include <sys/types.h>
45 #include <sys/time.h>
46 #include <sys/stat.h>
47 #include <string.h>
48 #include <stdint.h>
49 #include <stdio.h>
50 #include "pax.h"
51 #include "cpio.h"
52 #include "extern.h"
53 
54 static int rd_nm(ARCHD *, int);
55 static int rd_ln_nm(ARCHD *);
56 static int com_rd(ARCHD *);
57 
58 /*
59  * Routines which support the different cpio versions
60  */
61 
62 static int swp_head;		/* binary cpio header byte swap */
63 
64 /*
65  * Routines common to all versions of cpio
66  */
67 
68 /*
69  * cpio_strd()
70  *	Fire up the hard link detection code
71  * Return:
72  *      0 if ok -1 otherwise (the return values of lnk_start())
73  */
74 
75 int
76 cpio_strd(void)
77 {
78 	return(lnk_start());
79 }
80 
81 /*
82  * cpio_trail()
83  *	Called to determine if a header block is a valid trailer. We are
84  *	passed the block, the in_sync flag (which tells us we are in resync
85  *	mode; looking for a valid header), and cnt (which starts at zero)
86  *	which is used to count the number of empty blocks we have seen so far.
87  * Return:
88  *	0 if a valid trailer, -1 if not a valid trailer,
89  */
90 
91 int
92 cpio_trail(ARCHD *arcn)
93 {
94 	/*
95 	 * look for trailer id in file we are about to process
96 	 */
97 	if ((strcmp(arcn->name, TRAILER) == 0) && (arcn->sb.st_size == 0))
98 		return(0);
99 	return(-1);
100 }
101 
102 /*
103  * com_rd()
104  *	operations common to all cpio read functions.
105  * Return:
106  *	0
107  */
108 
109 static int
110 com_rd(ARCHD *arcn)
111 {
112 	arcn->skip = 0;
113 	arcn->pat = NULL;
114 	arcn->org_name = arcn->name;
115 	switch(arcn->sb.st_mode & C_IFMT) {
116 	case C_ISFIFO:
117 		arcn->type = PAX_FIF;
118 		break;
119 	case C_ISDIR:
120 		arcn->type = PAX_DIR;
121 		break;
122 	case C_ISBLK:
123 		arcn->type = PAX_BLK;
124 		break;
125 	case C_ISCHR:
126 		arcn->type = PAX_CHR;
127 		break;
128 	case C_ISLNK:
129 		arcn->type = PAX_SLK;
130 		break;
131 	case C_ISOCK:
132 		arcn->type = PAX_SCK;
133 		break;
134 	case C_ISCTG:
135 	case C_ISREG:
136 	default:
137 		/*
138 		 * we have file data, set up skip (pad is set in the format
139 		 * specific sections)
140 		 */
141 		arcn->sb.st_mode = (arcn->sb.st_mode & 0xfff) | C_ISREG;
142 		arcn->type = PAX_REG;
143 		arcn->skip = arcn->sb.st_size;
144 		break;
145 	}
146 	if (chk_lnk(arcn) < 0)
147 		return(-1);
148 	return(0);
149 }
150 
151 /*
152  * cpio_endwr()
153  *	write the special file with the name trailer in the proper format
154  * Return:
155  *	result of the write of the trailer from the cpio specific write func
156  */
157 
158 int
159 cpio_endwr(void)
160 {
161 	ARCHD last;
162 
163 	/*
164 	 * create a trailer request and call the proper format write function
165 	 */
166 	memset(&last, 0, sizeof(last));
167 	last.nlen = sizeof(TRAILER) - 1;
168 	last.type = PAX_REG;
169 	last.sb.st_nlink = 1;
170 	(void)strcpy(last.name, TRAILER);
171 	return((*frmt->wr)(&last));
172 }
173 
174 /*
175  * rd_nam()
176  *	read in the file name which follows the cpio header
177  * Return:
178  *	0 if ok, -1 otherwise
179  */
180 
181 static int
182 rd_nm(ARCHD *arcn, int nsz)
183 {
184 	/*
185 	 * do not even try bogus values
186 	 */
187 	if ((nsz == 0) || (nsz > (int)sizeof(arcn->name))) {
188 		paxwarn(1, "Cpio file name length %d is out of range", nsz);
189 		return(-1);
190 	}
191 
192 	/*
193 	 * read the name and make sure it is not empty and is \0 terminated
194 	 */
195 	if ((rd_wrbuf(arcn->name,nsz) != nsz) || (arcn->name[nsz-1] != '\0') ||
196 	    (arcn->name[0] == '\0')) {
197 		paxwarn(1, "Cpio file name in header is corrupted");
198 		return(-1);
199 	}
200 	return(0);
201 }
202 
203 /*
204  * rd_ln_nm()
205  *	read in the link name for a file with links. The link name is stored
206  *	like file data (and is NOT \0 terminated!)
207  * Return:
208  *	0 if ok, -1 otherwise
209  */
210 
211 static int
212 rd_ln_nm(ARCHD *arcn)
213 {
214 	/*
215 	 * check the length specified for bogus values
216 	 */
217 	if ((arcn->sb.st_size == 0) ||
218 	    ((size_t)arcn->sb.st_size >= sizeof(arcn->ln_name))) {
219 		paxwarn(1, "Cpio link name length is invalid: %ju",
220 		    (uintmax_t)arcn->sb.st_size);
221 		return(-1);
222 	}
223 
224 	/*
225 	 * read in the link name and \0 terminate it
226 	 */
227 	if (rd_wrbuf(arcn->ln_name, (int)arcn->sb.st_size) !=
228 	    (int)arcn->sb.st_size) {
229 		paxwarn(1, "Cpio link name read error");
230 		return(-1);
231 	}
232 	arcn->ln_nlen = arcn->sb.st_size;
233 	arcn->ln_name[arcn->ln_nlen] = '\0';
234 
235 	/*
236 	 * watch out for those empty link names
237 	 */
238 	if (arcn->ln_name[0] == '\0') {
239 		paxwarn(1, "Cpio link name is corrupt");
240 		return(-1);
241 	}
242 	return(0);
243 }
244 
245 /*
246  * Routines common to the extended byte oriented cpio format
247  */
248 
249 /*
250  * cpio_id()
251  *      determine if a block given to us is a valid extended byte oriented
252  *	cpio header
253  * Return:
254  *      0 if a valid header, -1 otherwise
255  */
256 
257 int
258 cpio_id(char *blk, int size)
259 {
260 	if ((size < (int)sizeof(HD_CPIO)) ||
261 	    (strncmp(blk, AMAGIC, sizeof(AMAGIC) - 1) != 0))
262 		return(-1);
263 	return(0);
264 }
265 
266 /*
267  * cpio_rd()
268  *	determine if a buffer is a byte oriented extended cpio archive entry.
269  *	convert and store the values in the ARCHD parameter.
270  * Return:
271  *	0 if a valid header, -1 otherwise.
272  */
273 
274 int
275 cpio_rd(ARCHD *arcn, char *buf)
276 {
277 	int nsz;
278 	HD_CPIO *hd;
279 
280 	/*
281 	 * check that this is a valid header, if not return -1
282 	 */
283 	if (cpio_id(buf, sizeof(HD_CPIO)) < 0)
284 		return(-1);
285 	hd = (HD_CPIO *)buf;
286 
287 	/*
288 	 * byte oriented cpio (posix) does not have padding! extract the octal
289 	 * ascii fields from the header
290 	 */
291 	arcn->pad = 0L;
292 	arcn->sb.st_dev = (dev_t)asc_ul(hd->c_dev, sizeof(hd->c_dev), OCT);
293 	arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), OCT);
294 	arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), OCT);
295 	arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), OCT);
296 	arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), OCT);
297 	arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
298 	    OCT);
299 	arcn->sb.st_rdev = (dev_t)asc_ul(hd->c_rdev, sizeof(hd->c_rdev), OCT);
300 	arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime, sizeof(hd->c_mtime),
301 	    OCT);
302 	arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
303 	arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,sizeof(hd->c_filesize),
304 	    OCT);
305 
306 	/*
307 	 * check name size and if valid, read in the name of this entry (name
308 	 * follows header in the archive)
309 	 */
310 	if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),OCT)) < 2)
311 		return(-1);
312 	arcn->nlen = nsz - 1;
313 	if (rd_nm(arcn, nsz) < 0)
314 		return(-1);
315 
316 	if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
317 		/*
318 	 	 * no link name to read for this file
319 	 	 */
320 		arcn->ln_nlen = 0;
321 		arcn->ln_name[0] = '\0';
322 		return(com_rd(arcn));
323 	}
324 
325 	/*
326 	 * check link name size and read in the link name. Link names are
327 	 * stored like file data.
328 	 */
329 	if (rd_ln_nm(arcn) < 0)
330 		return(-1);
331 
332 	/*
333 	 * we have a valid header (with a link)
334 	 */
335 	return(com_rd(arcn));
336 }
337 
338 /*
339  * cpio_endrd()
340  *      no cleanup needed here, just return size of the trailer (for append)
341  * Return:
342  *      size of trailer header in this format
343  */
344 
345 off_t
346 cpio_endrd(void)
347 {
348 	return((off_t)(sizeof(HD_CPIO) + sizeof(TRAILER)));
349 }
350 
351 /*
352  * cpio_stwr()
353  *	start up the device mapping table
354  * Return:
355  *	0 if ok, -1 otherwise (what dev_start() returns)
356  */
357 
358 int
359 cpio_stwr(void)
360 {
361 	return(dev_start());
362 }
363 
364 /*
365  * cpio_wr()
366  *	copy the data in the ARCHD to buffer in extended byte oriented cpio
367  *	format.
368  * Return
369  *      0 if file has data to be written after the header, 1 if file has NO
370  *	data to write after the header, -1 if archive write failed
371  */
372 
373 int
374 cpio_wr(ARCHD *arcn)
375 {
376 	HD_CPIO *hd;
377 	int nsz;
378 	HD_CPIO hdblk;
379 
380 	/*
381 	 * check and repair truncated device and inode fields in the header
382 	 */
383 	if (map_dev(arcn, (u_long)CPIO_MASK, (u_long)CPIO_MASK) < 0)
384 		return(-1);
385 
386 	arcn->pad = 0L;
387 	nsz = arcn->nlen + 1;
388 	hd = &hdblk;
389 	if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
390 		arcn->sb.st_rdev = 0;
391 
392 	switch(arcn->type) {
393 	case PAX_CTG:
394 	case PAX_REG:
395 	case PAX_HRG:
396 		/*
397 		 * set data size for file data
398 		 */
399 		if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
400 		    sizeof(hd->c_filesize), OCT)) {
401 			paxwarn(1,"File is too large for cpio format %s",
402 			    arcn->org_name);
403 			return(1);
404 		}
405 		break;
406 	case PAX_SLK:
407 		/*
408 		 * set data size to hold link name
409 		 */
410 		if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
411 		    sizeof(hd->c_filesize), OCT))
412 			goto out;
413 		break;
414 	default:
415 		/*
416 		 * all other file types have no file data
417 		 */
418 		if (ul_asc((u_long)0, hd->c_filesize, sizeof(hd->c_filesize),
419 		     OCT))
420 			goto out;
421 		break;
422 	}
423 
424 	/*
425 	 * copy the values to the header using octal ascii
426 	 */
427 	if (ul_asc((u_long)MAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) ||
428 	    ul_asc((u_long)arcn->sb.st_dev, hd->c_dev, sizeof(hd->c_dev),
429 		OCT) ||
430 	    ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
431 		OCT) ||
432 	    ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
433 		OCT) ||
434 	    ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
435 		OCT) ||
436 	    ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
437 		OCT) ||
438 	    ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
439 		 OCT) ||
440 	    ul_asc((u_long)arcn->sb.st_rdev, hd->c_rdev, sizeof(hd->c_rdev),
441 		OCT) ||
442 	    ul_asc((u_long)arcn->sb.st_mtime,hd->c_mtime,sizeof(hd->c_mtime),
443 		OCT) ||
444 	    ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), OCT))
445 		goto out;
446 
447 	/*
448 	 * write the file name to the archive
449 	 */
450 	if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_CPIO)) < 0) ||
451 	    (wr_rdbuf(arcn->name, nsz) < 0)) {
452 		paxwarn(1, "Unable to write cpio header for %s", arcn->org_name);
453 		return(-1);
454 	}
455 
456 	/*
457 	 * if this file has data, we are done. The caller will write the file
458 	 * data, if we are link tell caller we are done, go to next file
459 	 */
460 	if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
461 	    (arcn->type == PAX_HRG))
462 		return(0);
463 	if (arcn->type != PAX_SLK)
464 		return(1);
465 
466 	/*
467 	 * write the link name to the archive, tell the caller to go to the
468 	 * next file as we are done.
469 	 */
470 	if (wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) {
471 		paxwarn(1,"Unable to write cpio link name for %s",arcn->org_name);
472 		return(-1);
473 	}
474 	return(1);
475 
476     out:
477 	/*
478 	 * header field is out of range
479 	 */
480 	paxwarn(1, "Cpio header field is too small to store file %s",
481 	    arcn->org_name);
482 	return(1);
483 }
484 
485 /*
486  * Routines common to the system VR4 version of cpio (with/without file CRC)
487  */
488 
489 /*
490  * vcpio_id()
491  *      determine if a block given to us is a valid system VR4 cpio header
492  *	WITHOUT crc. WATCH it the magic cookies are in OCTAL, the header
493  *	uses HEX
494  * Return:
495  *      0 if a valid header, -1 otherwise
496  */
497 
498 int
499 vcpio_id(char *blk, int size)
500 {
501 	if ((size < (int)sizeof(HD_VCPIO)) ||
502 	    (strncmp(blk, AVMAGIC, sizeof(AVMAGIC) - 1) != 0))
503 		return(-1);
504 	return(0);
505 }
506 
507 /*
508  * crc_id()
509  *      determine if a block given to us is a valid system VR4 cpio header
510  *	WITH crc. WATCH it the magic cookies are in OCTAL the header uses HEX
511  * Return:
512  *      0 if a valid header, -1 otherwise
513  */
514 
515 int
516 crc_id(char *blk, int size)
517 {
518 	if ((size < (int)sizeof(HD_VCPIO)) ||
519 	    (strncmp(blk, AVCMAGIC, (int)sizeof(AVCMAGIC) - 1) != 0))
520 		return(-1);
521 	return(0);
522 }
523 
524 /*
525  * crc_strd()
526  w	set file data CRC calculations. Fire up the hard link detection code
527  * Return:
528  *      0 if ok -1 otherwise (the return values of lnk_start())
529  */
530 
531 int
532 crc_strd(void)
533 {
534 	docrc = 1;
535 	return(lnk_start());
536 }
537 
538 /*
539  * vcpio_rd()
540  *	determine if a buffer is a system VR4 archive entry. (with/without CRC)
541  *	convert and store the values in the ARCHD parameter.
542  * Return:
543  *	0 if a valid header, -1 otherwise.
544  */
545 
546 int
547 vcpio_rd(ARCHD *arcn, char *buf)
548 {
549 	HD_VCPIO *hd;
550 	dev_t devminor;
551 	dev_t devmajor;
552 	int nsz;
553 
554 	/*
555 	 * during the id phase it was determined if we were using CRC, use the
556 	 * proper id routine.
557 	 */
558 	if (docrc) {
559 		if (crc_id(buf, sizeof(HD_VCPIO)) < 0)
560 			return(-1);
561 	} else {
562 		if (vcpio_id(buf, sizeof(HD_VCPIO)) < 0)
563 			return(-1);
564 	}
565 
566 	hd = (HD_VCPIO *)buf;
567 	arcn->pad = 0L;
568 
569 	/*
570 	 * extract the hex ascii fields from the header
571 	 */
572 	arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), HEX);
573 	arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), HEX);
574 	arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), HEX);
575 	arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), HEX);
576 	arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime,sizeof(hd->c_mtime),HEX);
577 	arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
578 	arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,
579 	    sizeof(hd->c_filesize), HEX);
580 	arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
581 	    HEX);
582 	devmajor = (dev_t)asc_ul(hd->c_maj, sizeof(hd->c_maj), HEX);
583 	devminor = (dev_t)asc_ul(hd->c_min, sizeof(hd->c_min), HEX);
584 	arcn->sb.st_dev = TODEV(devmajor, devminor);
585 	devmajor = (dev_t)asc_ul(hd->c_rmaj, sizeof(hd->c_maj), HEX);
586 	devminor = (dev_t)asc_ul(hd->c_rmin, sizeof(hd->c_min), HEX);
587 	arcn->sb.st_rdev = TODEV(devmajor, devminor);
588 	arcn->crc = asc_ul(hd->c_chksum, sizeof(hd->c_chksum), HEX);
589 
590 	/*
591 	 * check the length of the file name, if ok read it in, return -1 if
592 	 * bogus
593 	 */
594 	if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),HEX)) < 2)
595 		return(-1);
596 	arcn->nlen = nsz - 1;
597 	if (rd_nm(arcn, nsz) < 0)
598 		return(-1);
599 
600 	/*
601 	 * skip padding. header + filename is aligned to 4 byte boundaries
602 	 */
603 	if (rd_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)
604 		return(-1);
605 
606 	/*
607 	 * if not a link (or a file with no data), calculate pad size (for
608 	 * padding which follows the file data), clear the link name and return
609 	 */
610 	if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
611 		/*
612 		 * we have a valid header (not a link)
613 		 */
614 		arcn->ln_nlen = 0;
615 		arcn->ln_name[0] = '\0';
616 		arcn->pad = VCPIO_PAD(arcn->sb.st_size);
617 		return(com_rd(arcn));
618 	}
619 
620 	/*
621 	 * read in the link name and skip over the padding
622 	 */
623 	if ((rd_ln_nm(arcn) < 0) ||
624 	    (rd_skip((off_t)(VCPIO_PAD(arcn->sb.st_size))) < 0))
625 		return(-1);
626 
627 	/*
628 	 * we have a valid header (with a link)
629 	 */
630 	return(com_rd(arcn));
631 }
632 
633 /*
634  * vcpio_endrd()
635  *      no cleanup needed here, just return size of the trailer (for append)
636  * Return:
637  *      size of trailer header in this format
638  */
639 
640 off_t
641 vcpio_endrd(void)
642 {
643 	return((off_t)(sizeof(HD_VCPIO) + sizeof(TRAILER) +
644 		(VCPIO_PAD(sizeof(HD_VCPIO) + sizeof(TRAILER)))));
645 }
646 
647 /*
648  * crc_stwr()
649  *	start up the device mapping table, enable crc file calculation
650  * Return:
651  *	0 if ok, -1 otherwise (what dev_start() returns)
652  */
653 
654 int
655 crc_stwr(void)
656 {
657 	docrc = 1;
658 	return(dev_start());
659 }
660 
661 /*
662  * vcpio_wr()
663  *	copy the data in the ARCHD to buffer in system VR4 cpio
664  *	(with/without crc) format.
665  * Return
666  *	0 if file has data to be written after the header, 1 if file has
667  *	NO data to write after the header, -1 if archive write failed
668  */
669 
670 int
671 vcpio_wr(ARCHD *arcn)
672 {
673 	HD_VCPIO *hd;
674 	unsigned int nsz;
675 	HD_VCPIO hdblk;
676 
677 	/*
678 	 * check and repair truncated device and inode fields in the cpio
679 	 * header
680 	 */
681 	if (map_dev(arcn, (u_long)VCPIO_MASK, (u_long)VCPIO_MASK) < 0)
682 		return(-1);
683 	nsz = arcn->nlen + 1;
684 	hd = &hdblk;
685 	if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
686 		arcn->sb.st_rdev = 0;
687 
688 	/*
689 	 * add the proper magic value depending whether we were asked for
690 	 * file data crc's, and the crc if needed.
691 	 */
692 	if (docrc) {
693 		if (ul_asc((u_long)VCMAGIC, hd->c_magic, sizeof(hd->c_magic),
694 	    		OCT) ||
695 		    ul_asc((u_long)arcn->crc,hd->c_chksum,sizeof(hd->c_chksum),
696 	    		HEX))
697 			goto out;
698 	} else {
699 		if (ul_asc((u_long)VMAGIC, hd->c_magic, sizeof(hd->c_magic),
700 	    		OCT) ||
701 		    ul_asc((u_long)0L, hd->c_chksum, sizeof(hd->c_chksum),HEX))
702 			goto out;
703 	}
704 
705 	switch(arcn->type) {
706 	case PAX_CTG:
707 	case PAX_REG:
708 	case PAX_HRG:
709 		/*
710 		 * caller will copy file data to the archive. tell him how
711 		 * much to pad.
712 		 */
713 		arcn->pad = VCPIO_PAD(arcn->sb.st_size);
714 		if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
715 		    sizeof(hd->c_filesize), HEX)) {
716 			paxwarn(1,"File is too large for sv4cpio format %s",
717 			    arcn->org_name);
718 			return(1);
719 		}
720 		break;
721 	case PAX_SLK:
722 		/*
723 		 * no file data for the caller to process, the file data has
724 		 * the size of the link
725 		 */
726 		arcn->pad = 0L;
727 		if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
728 		    sizeof(hd->c_filesize), HEX))
729 			goto out;
730 		break;
731 	default:
732 		/*
733 		 * no file data for the caller to process
734 		 */
735 		arcn->pad = 0L;
736 		if (ul_asc((u_long)0L, hd->c_filesize, sizeof(hd->c_filesize),
737 		    HEX))
738 			goto out;
739 		break;
740 	}
741 
742 	/*
743 	 * set the other fields in the header
744 	 */
745 	if (ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
746 		HEX) ||
747 	    ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
748 		HEX) ||
749 	    ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
750 		HEX) ||
751 	    ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
752     		HEX) ||
753 	    ul_asc((u_long)arcn->sb.st_mtime, hd->c_mtime, sizeof(hd->c_mtime),
754     		HEX) ||
755 	    ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
756     		HEX) ||
757 	    ul_asc((u_long)MAJOR(arcn->sb.st_dev),hd->c_maj, sizeof(hd->c_maj),
758 		HEX) ||
759 	    ul_asc((u_long)MINOR(arcn->sb.st_dev),hd->c_min, sizeof(hd->c_min),
760 		HEX) ||
761 	    ul_asc((u_long)MAJOR(arcn->sb.st_rdev),hd->c_rmaj,sizeof(hd->c_maj),
762 		HEX) ||
763 	    ul_asc((u_long)MINOR(arcn->sb.st_rdev),hd->c_rmin,sizeof(hd->c_min),
764 		HEX) ||
765 	    ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), HEX))
766 		goto out;
767 
768 	/*
769 	 * write the header, the file name and padding as required.
770 	 */
771 	if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_VCPIO)) < 0) ||
772 	    (wr_rdbuf(arcn->name, (int)nsz) < 0)  ||
773 	    (wr_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)) {
774 		paxwarn(1,"Could not write sv4cpio header for %s",arcn->org_name);
775 		return(-1);
776 	}
777 
778 	/*
779 	 * if we have file data, tell the caller we are done, copy the file
780 	 */
781 	if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
782 	    (arcn->type == PAX_HRG))
783 		return(0);
784 
785 	/*
786 	 * if we are not a link, tell the caller we are done, go to next file
787 	 */
788 	if (arcn->type != PAX_SLK)
789 		return(1);
790 
791 	/*
792 	 * write the link name, tell the caller we are done.
793 	 */
794 	if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
795 	    (wr_skip((off_t)(VCPIO_PAD(arcn->ln_nlen))) < 0)) {
796 		paxwarn(1,"Could not write sv4cpio link name for %s",
797 		    arcn->org_name);
798 		return(-1);
799 	}
800 	return(1);
801 
802     out:
803 	/*
804 	 * header field is out of range
805 	 */
806 	paxwarn(1,"Sv4cpio header field is too small for file %s",arcn->org_name);
807 	return(1);
808 }
809 
810 /*
811  * Routines common to the old binary header cpio
812  */
813 
814 /*
815  * bcpio_id()
816  *      determine if a block given to us is an old binary cpio header
817  *	(with/without header byte swapping)
818  * Return:
819  *      0 if a valid header, -1 otherwise
820  */
821 
822 int
823 bcpio_id(char *blk, int size)
824 {
825 	if (size < (int)sizeof(HD_BCPIO))
826 		return(-1);
827 
828 	/*
829 	 * check both normal and byte swapped magic cookies
830 	 */
831 	if (((u_short)SHRT_EXT(blk)) == MAGIC)
832 		return(0);
833 	if (((u_short)RSHRT_EXT(blk)) == MAGIC) {
834 		if (!swp_head)
835 			++swp_head;
836 		return(0);
837 	}
838 	return(-1);
839 }
840 
841 /*
842  * bcpio_rd()
843  *	determine if a buffer is an old binary archive entry. (It may have byte
844  *	swapped header) convert and store the values in the ARCHD parameter.
845  *	This is a very old header format and should not really be used.
846  * Return:
847  *	0 if a valid header, -1 otherwise.
848  */
849 
850 int
851 bcpio_rd(ARCHD *arcn, char *buf)
852 {
853 	HD_BCPIO *hd;
854 	int nsz;
855 
856 	/*
857 	 * check the header
858 	 */
859 	if (bcpio_id(buf, sizeof(HD_BCPIO)) < 0)
860 		return(-1);
861 
862 	arcn->pad = 0L;
863 	hd = (HD_BCPIO *)buf;
864 	if (swp_head) {
865 		/*
866 		 * header has swapped bytes on 16 bit boundaries
867 		 */
868 		arcn->sb.st_dev = (dev_t)(RSHRT_EXT(hd->h_dev));
869 		arcn->sb.st_ino = (ino_t)(RSHRT_EXT(hd->h_ino));
870 		arcn->sb.st_mode = (mode_t)(RSHRT_EXT(hd->h_mode));
871 		arcn->sb.st_uid = (uid_t)(RSHRT_EXT(hd->h_uid));
872 		arcn->sb.st_gid = (gid_t)(RSHRT_EXT(hd->h_gid));
873 		arcn->sb.st_nlink = (nlink_t)(RSHRT_EXT(hd->h_nlink));
874 		arcn->sb.st_rdev = (dev_t)(RSHRT_EXT(hd->h_rdev));
875 		arcn->sb.st_mtime = (time_t)(RSHRT_EXT(hd->h_mtime_1));
876 		arcn->sb.st_mtime =  (arcn->sb.st_mtime << 16) |
877 			((time_t)(RSHRT_EXT(hd->h_mtime_2)));
878 		arcn->sb.st_size = (off_t)(RSHRT_EXT(hd->h_filesize_1));
879 		arcn->sb.st_size = (arcn->sb.st_size << 16) |
880 			((off_t)(RSHRT_EXT(hd->h_filesize_2)));
881 		nsz = (int)(RSHRT_EXT(hd->h_namesize));
882 	} else {
883 		arcn->sb.st_dev = (dev_t)(SHRT_EXT(hd->h_dev));
884 		arcn->sb.st_ino = (ino_t)(SHRT_EXT(hd->h_ino));
885 		arcn->sb.st_mode = (mode_t)(SHRT_EXT(hd->h_mode));
886 		arcn->sb.st_uid = (uid_t)(SHRT_EXT(hd->h_uid));
887 		arcn->sb.st_gid = (gid_t)(SHRT_EXT(hd->h_gid));
888 		arcn->sb.st_nlink = (nlink_t)(SHRT_EXT(hd->h_nlink));
889 		arcn->sb.st_rdev = (dev_t)(SHRT_EXT(hd->h_rdev));
890 		arcn->sb.st_mtime = (time_t)(SHRT_EXT(hd->h_mtime_1));
891 		arcn->sb.st_mtime =  (arcn->sb.st_mtime << 16) |
892 			((time_t)(SHRT_EXT(hd->h_mtime_2)));
893 		arcn->sb.st_size = (off_t)(SHRT_EXT(hd->h_filesize_1));
894 		arcn->sb.st_size = (arcn->sb.st_size << 16) |
895 			((off_t)(SHRT_EXT(hd->h_filesize_2)));
896 		nsz = (int)(SHRT_EXT(hd->h_namesize));
897 	}
898 	arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
899 
900 	/*
901 	 * check the file name size, if bogus give up. otherwise read the file
902 	 * name
903 	 */
904 	if (nsz < 2)
905 		return(-1);
906 	arcn->nlen = nsz - 1;
907 	if (rd_nm(arcn, nsz) < 0)
908 		return(-1);
909 
910 	/*
911 	 * header + file name are aligned to 2 byte boundaries, skip if needed
912 	 */
913 	if (rd_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)
914 		return(-1);
915 
916 	/*
917 	 * if not a link (or a file with no data), calculate pad size (for
918 	 * padding which follows the file data), clear the link name and return
919 	 */
920 	if (((arcn->sb.st_mode & C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)){
921 		/*
922 		 * we have a valid header (not a link)
923 		 */
924 		arcn->ln_nlen = 0;
925 		arcn->ln_name[0] = '\0';
926 		arcn->pad = BCPIO_PAD(arcn->sb.st_size);
927 		return(com_rd(arcn));
928 	}
929 
930 	if ((rd_ln_nm(arcn) < 0) ||
931 	    (rd_skip((off_t)(BCPIO_PAD(arcn->sb.st_size))) < 0))
932 		return(-1);
933 
934 	/*
935 	 * we have a valid header (with a link)
936 	 */
937 	return(com_rd(arcn));
938 }
939 
940 /*
941  * bcpio_endrd()
942  *      no cleanup needed here, just return size of the trailer (for append)
943  * Return:
944  *      size of trailer header in this format
945  */
946 
947 off_t
948 bcpio_endrd(void)
949 {
950 	return((off_t)(sizeof(HD_BCPIO) + sizeof(TRAILER) +
951 		(BCPIO_PAD(sizeof(HD_BCPIO) + sizeof(TRAILER)))));
952 }
953 
954 /*
955  * bcpio_wr()
956  *	copy the data in the ARCHD to buffer in old binary cpio format
957  *	There is a real chance of field overflow with this critter. So we
958  *	always check that the conversion is ok. nobody in their right mind
959  *	should write an archive in this format...
960  * Return
961  *      0 if file has data to be written after the header, 1 if file has NO
962  *	data to write after the header, -1 if archive write failed
963  */
964 
965 int
966 bcpio_wr(ARCHD *arcn)
967 {
968 	HD_BCPIO *hd;
969 	int nsz;
970 	HD_BCPIO hdblk;
971 	off_t t_offt;
972 	int t_int;
973 	time_t t_timet;
974 
975 	/*
976 	 * check and repair truncated device and inode fields in the cpio
977 	 * header
978 	 */
979 	if (map_dev(arcn, (u_long)BCPIO_MASK, (u_long)BCPIO_MASK) < 0)
980 		return(-1);
981 
982 	if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
983 		arcn->sb.st_rdev = 0;
984 	hd = &hdblk;
985 
986 	switch(arcn->type) {
987 	case PAX_CTG:
988 	case PAX_REG:
989 	case PAX_HRG:
990 		/*
991 		 * caller will copy file data to the archive. tell him how
992 		 * much to pad.
993 		 */
994 		arcn->pad = BCPIO_PAD(arcn->sb.st_size);
995 		hd->h_filesize_1[0] = CHR_WR_0(arcn->sb.st_size);
996 		hd->h_filesize_1[1] = CHR_WR_1(arcn->sb.st_size);
997 		hd->h_filesize_2[0] = CHR_WR_2(arcn->sb.st_size);
998 		hd->h_filesize_2[1] = CHR_WR_3(arcn->sb.st_size);
999 		t_offt = (off_t)(SHRT_EXT(hd->h_filesize_1));
1000 		t_offt = (t_offt<<16) | ((off_t)(SHRT_EXT(hd->h_filesize_2)));
1001 		if (arcn->sb.st_size != t_offt) {
1002 			paxwarn(1,"File is too large for bcpio format %s",
1003 			    arcn->org_name);
1004 			return(1);
1005 		}
1006 		break;
1007 	case PAX_SLK:
1008 		/*
1009 		 * no file data for the caller to process, the file data has
1010 		 * the size of the link
1011 		 */
1012 		arcn->pad = 0L;
1013 		hd->h_filesize_1[0] = CHR_WR_0(arcn->ln_nlen);
1014 		hd->h_filesize_1[1] = CHR_WR_1(arcn->ln_nlen);
1015 		hd->h_filesize_2[0] = CHR_WR_2(arcn->ln_nlen);
1016 		hd->h_filesize_2[1] = CHR_WR_3(arcn->ln_nlen);
1017 		t_int = (int)(SHRT_EXT(hd->h_filesize_1));
1018 		t_int = (t_int << 16) | ((int)(SHRT_EXT(hd->h_filesize_2)));
1019 		if (arcn->ln_nlen != t_int)
1020 			goto out;
1021 		break;
1022 	default:
1023 		/*
1024 		 * no file data for the caller to process
1025 		 */
1026 		arcn->pad = 0L;
1027 		hd->h_filesize_1[0] = (char)0;
1028 		hd->h_filesize_1[1] = (char)0;
1029 		hd->h_filesize_2[0] = (char)0;
1030 		hd->h_filesize_2[1] = (char)0;
1031 		break;
1032 	}
1033 
1034 	/*
1035 	 * build up the rest of the fields
1036 	 */
1037 	hd->h_magic[0] = CHR_WR_2(MAGIC);
1038 	hd->h_magic[1] = CHR_WR_3(MAGIC);
1039 	hd->h_dev[0] = CHR_WR_2(arcn->sb.st_dev);
1040 	hd->h_dev[1] = CHR_WR_3(arcn->sb.st_dev);
1041 	if (arcn->sb.st_dev != (dev_t)(SHRT_EXT(hd->h_dev)))
1042 		goto out;
1043 	hd->h_ino[0] = CHR_WR_2(arcn->sb.st_ino);
1044 	hd->h_ino[1] = CHR_WR_3(arcn->sb.st_ino);
1045 	if (arcn->sb.st_ino != (ino_t)(SHRT_EXT(hd->h_ino)))
1046 		goto out;
1047 	hd->h_mode[0] = CHR_WR_2(arcn->sb.st_mode);
1048 	hd->h_mode[1] = CHR_WR_3(arcn->sb.st_mode);
1049 	if (arcn->sb.st_mode != (mode_t)(SHRT_EXT(hd->h_mode)))
1050 		goto out;
1051 	hd->h_uid[0] = CHR_WR_2(arcn->sb.st_uid);
1052 	hd->h_uid[1] = CHR_WR_3(arcn->sb.st_uid);
1053 	if (arcn->sb.st_uid != (uid_t)(SHRT_EXT(hd->h_uid)))
1054 		goto out;
1055 	hd->h_gid[0] = CHR_WR_2(arcn->sb.st_gid);
1056 	hd->h_gid[1] = CHR_WR_3(arcn->sb.st_gid);
1057 	if (arcn->sb.st_gid != (gid_t)(SHRT_EXT(hd->h_gid)))
1058 		goto out;
1059 	hd->h_nlink[0] = CHR_WR_2(arcn->sb.st_nlink);
1060 	hd->h_nlink[1] = CHR_WR_3(arcn->sb.st_nlink);
1061 	if (arcn->sb.st_nlink != (nlink_t)(SHRT_EXT(hd->h_nlink)))
1062 		goto out;
1063 	hd->h_rdev[0] = CHR_WR_2(arcn->sb.st_rdev);
1064 	hd->h_rdev[1] = CHR_WR_3(arcn->sb.st_rdev);
1065 	if (arcn->sb.st_rdev != (dev_t)(SHRT_EXT(hd->h_rdev)))
1066 		goto out;
1067 	hd->h_mtime_1[0] = CHR_WR_0(arcn->sb.st_mtime);
1068 	hd->h_mtime_1[1] = CHR_WR_1(arcn->sb.st_mtime);
1069 	hd->h_mtime_2[0] = CHR_WR_2(arcn->sb.st_mtime);
1070 	hd->h_mtime_2[1] = CHR_WR_3(arcn->sb.st_mtime);
1071 	t_timet = (time_t)(SHRT_EXT(hd->h_mtime_1));
1072 	t_timet =  (t_timet << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2)));
1073 	if (arcn->sb.st_mtime != t_timet)
1074 		goto out;
1075 	nsz = arcn->nlen + 1;
1076 	hd->h_namesize[0] = CHR_WR_2(nsz);
1077 	hd->h_namesize[1] = CHR_WR_3(nsz);
1078 	if (nsz != (int)(SHRT_EXT(hd->h_namesize)))
1079 		goto out;
1080 
1081 	/*
1082 	 * write the header, the file name and padding as required.
1083 	 */
1084 	if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_BCPIO)) < 0) ||
1085 	    (wr_rdbuf(arcn->name, nsz) < 0) ||
1086 	    (wr_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)) {
1087 		paxwarn(1, "Could not write bcpio header for %s", arcn->org_name);
1088 		return(-1);
1089 	}
1090 
1091 	/*
1092 	 * if we have file data, tell the caller we are done
1093 	 */
1094 	if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
1095 	    (arcn->type == PAX_HRG))
1096 		return(0);
1097 
1098 	/*
1099 	 * if we are not a link, tell the caller we are done, go to next file
1100 	 */
1101 	if (arcn->type != PAX_SLK)
1102 		return(1);
1103 
1104 	/*
1105 	 * write the link name, tell the caller we are done.
1106 	 */
1107 	if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
1108 	    (wr_skip((off_t)(BCPIO_PAD(arcn->ln_nlen))) < 0)) {
1109 		paxwarn(1,"Could not write bcpio link name for %s",arcn->org_name);
1110 		return(-1);
1111 	}
1112 	return(1);
1113 
1114     out:
1115 	/*
1116 	 * header field is out of range
1117 	 */
1118 	paxwarn(1,"Bcpio header field is too small for file %s", arcn->org_name);
1119 	return(1);
1120 }
1121