1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1992 Keith Muller. 5 * Copyright (c) 1992, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * Keith Muller of the University of California, San Diego. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36 #include <sys/types.h> 37 #include <sys/time.h> 38 #include <sys/stat.h> 39 #include <string.h> 40 #include <stdint.h> 41 #include <stdio.h> 42 #include "pax.h" 43 #include "cpio.h" 44 #include "extern.h" 45 46 static int rd_nm(ARCHD *, int); 47 static int rd_ln_nm(ARCHD *); 48 static int com_rd(ARCHD *); 49 50 /* 51 * Routines which support the different cpio versions 52 */ 53 54 static int swp_head; /* binary cpio header byte swap */ 55 56 /* 57 * Routines common to all versions of cpio 58 */ 59 60 /* 61 * cpio_strd() 62 * Fire up the hard link detection code 63 * Return: 64 * 0 if ok -1 otherwise (the return values of lnk_start()) 65 */ 66 67 int 68 cpio_strd(void) 69 { 70 return(lnk_start()); 71 } 72 73 /* 74 * cpio_trail() 75 * Called to determine if a header block is a valid trailer. We are 76 * passed the block, the in_sync flag (which tells us we are in resync 77 * mode; looking for a valid header), and cnt (which starts at zero) 78 * which is used to count the number of empty blocks we have seen so far. 79 * Return: 80 * 0 if a valid trailer, -1 if not a valid trailer, 81 */ 82 83 int 84 cpio_trail(ARCHD *arcn) 85 { 86 /* 87 * look for trailer id in file we are about to process 88 */ 89 if ((strcmp(arcn->name, TRAILER) == 0) && (arcn->sb.st_size == 0)) 90 return(0); 91 return(-1); 92 } 93 94 /* 95 * com_rd() 96 * operations common to all cpio read functions. 97 * Return: 98 * 0 99 */ 100 101 static int 102 com_rd(ARCHD *arcn) 103 { 104 arcn->skip = 0; 105 arcn->pat = NULL; 106 arcn->org_name = arcn->name; 107 switch(arcn->sb.st_mode & C_IFMT) { 108 case C_ISFIFO: 109 arcn->type = PAX_FIF; 110 break; 111 case C_ISDIR: 112 arcn->type = PAX_DIR; 113 break; 114 case C_ISBLK: 115 arcn->type = PAX_BLK; 116 break; 117 case C_ISCHR: 118 arcn->type = PAX_CHR; 119 break; 120 case C_ISLNK: 121 arcn->type = PAX_SLK; 122 break; 123 case C_ISOCK: 124 arcn->type = PAX_SCK; 125 break; 126 case C_ISCTG: 127 case C_ISREG: 128 default: 129 /* 130 * we have file data, set up skip (pad is set in the format 131 * specific sections) 132 */ 133 arcn->sb.st_mode = (arcn->sb.st_mode & 0xfff) | C_ISREG; 134 arcn->type = PAX_REG; 135 arcn->skip = arcn->sb.st_size; 136 break; 137 } 138 if (chk_lnk(arcn) < 0) 139 return(-1); 140 return(0); 141 } 142 143 /* 144 * cpio_endwr() 145 * write the special file with the name trailer in the proper format 146 * Return: 147 * result of the write of the trailer from the cpio specific write func 148 */ 149 150 int 151 cpio_endwr(void) 152 { 153 ARCHD last; 154 155 /* 156 * create a trailer request and call the proper format write function 157 */ 158 memset(&last, 0, sizeof(last)); 159 last.nlen = sizeof(TRAILER) - 1; 160 last.type = PAX_REG; 161 last.sb.st_nlink = 1; 162 (void)strcpy(last.name, TRAILER); 163 return((*frmt->wr)(&last)); 164 } 165 166 /* 167 * rd_nam() 168 * read in the file name which follows the cpio header 169 * Return: 170 * 0 if ok, -1 otherwise 171 */ 172 173 static int 174 rd_nm(ARCHD *arcn, int nsz) 175 { 176 /* 177 * do not even try bogus values 178 */ 179 if ((nsz == 0) || (nsz > (int)sizeof(arcn->name))) { 180 paxwarn(1, "Cpio file name length %d is out of range", nsz); 181 return(-1); 182 } 183 184 /* 185 * read the name and make sure it is not empty and is \0 terminated 186 */ 187 if ((rd_wrbuf(arcn->name,nsz) != nsz) || (arcn->name[nsz-1] != '\0') || 188 (arcn->name[0] == '\0')) { 189 paxwarn(1, "Cpio file name in header is corrupted"); 190 return(-1); 191 } 192 return(0); 193 } 194 195 /* 196 * rd_ln_nm() 197 * read in the link name for a file with links. The link name is stored 198 * like file data (and is NOT \0 terminated!) 199 * Return: 200 * 0 if ok, -1 otherwise 201 */ 202 203 static int 204 rd_ln_nm(ARCHD *arcn) 205 { 206 /* 207 * check the length specified for bogus values 208 */ 209 if ((arcn->sb.st_size == 0) || 210 ((size_t)arcn->sb.st_size >= sizeof(arcn->ln_name))) { 211 paxwarn(1, "Cpio link name length is invalid: %ju", 212 (uintmax_t)arcn->sb.st_size); 213 return(-1); 214 } 215 216 /* 217 * read in the link name and \0 terminate it 218 */ 219 if (rd_wrbuf(arcn->ln_name, (int)arcn->sb.st_size) != 220 (int)arcn->sb.st_size) { 221 paxwarn(1, "Cpio link name read error"); 222 return(-1); 223 } 224 arcn->ln_nlen = arcn->sb.st_size; 225 arcn->ln_name[arcn->ln_nlen] = '\0'; 226 227 /* 228 * watch out for those empty link names 229 */ 230 if (arcn->ln_name[0] == '\0') { 231 paxwarn(1, "Cpio link name is corrupt"); 232 return(-1); 233 } 234 return(0); 235 } 236 237 /* 238 * Routines common to the extended byte oriented cpio format 239 */ 240 241 /* 242 * cpio_id() 243 * determine if a block given to us is a valid extended byte oriented 244 * cpio header 245 * Return: 246 * 0 if a valid header, -1 otherwise 247 */ 248 249 int 250 cpio_id(char *blk, int size) 251 { 252 if ((size < (int)sizeof(HD_CPIO)) || 253 (strncmp(blk, AMAGIC, sizeof(AMAGIC) - 1) != 0)) 254 return(-1); 255 return(0); 256 } 257 258 /* 259 * cpio_rd() 260 * determine if a buffer is a byte oriented extended cpio archive entry. 261 * convert and store the values in the ARCHD parameter. 262 * Return: 263 * 0 if a valid header, -1 otherwise. 264 */ 265 266 int 267 cpio_rd(ARCHD *arcn, char *buf) 268 { 269 int nsz; 270 HD_CPIO *hd; 271 272 /* 273 * check that this is a valid header, if not return -1 274 */ 275 if (cpio_id(buf, sizeof(HD_CPIO)) < 0) 276 return(-1); 277 memset(arcn, 0, sizeof *arcn); 278 hd = (HD_CPIO *)buf; 279 280 /* 281 * byte oriented cpio (posix) does not have padding! extract the octal 282 * ascii fields from the header 283 */ 284 arcn->sb.st_dev = (dev_t)asc_ul(hd->c_dev, sizeof(hd->c_dev), OCT); 285 arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), OCT); 286 arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), OCT); 287 arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), OCT); 288 arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), OCT); 289 arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink), 290 OCT); 291 arcn->sb.st_rdev = (dev_t)asc_ul(hd->c_rdev, sizeof(hd->c_rdev), OCT); 292 arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime, sizeof(hd->c_mtime), 293 OCT); 294 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; 295 arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,sizeof(hd->c_filesize), 296 OCT); 297 298 /* 299 * check name size and if valid, read in the name of this entry (name 300 * follows header in the archive) 301 */ 302 if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),OCT)) < 2) 303 return(-1); 304 arcn->nlen = nsz - 1; 305 if (rd_nm(arcn, nsz) < 0) 306 return(-1); 307 308 if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) { 309 /* 310 * no link name to read for this file 311 */ 312 return(com_rd(arcn)); 313 } 314 315 /* 316 * check link name size and read in the link name. Link names are 317 * stored like file data. 318 */ 319 if (rd_ln_nm(arcn) < 0) 320 return(-1); 321 322 /* 323 * we have a valid header (with a link) 324 */ 325 return(com_rd(arcn)); 326 } 327 328 /* 329 * cpio_endrd() 330 * no cleanup needed here, just return size of the trailer (for append) 331 * Return: 332 * size of trailer header in this format 333 */ 334 335 off_t 336 cpio_endrd(void) 337 { 338 return((off_t)(sizeof(HD_CPIO) + sizeof(TRAILER))); 339 } 340 341 /* 342 * cpio_stwr() 343 * start up the device mapping table 344 * Return: 345 * 0 if ok, -1 otherwise (what dev_start() returns) 346 */ 347 348 int 349 cpio_stwr(void) 350 { 351 return(dev_start()); 352 } 353 354 /* 355 * cpio_wr() 356 * copy the data in the ARCHD to buffer in extended byte oriented cpio 357 * format. 358 * Return 359 * 0 if file has data to be written after the header, 1 if file has NO 360 * data to write after the header, -1 if archive write failed 361 */ 362 363 int 364 cpio_wr(ARCHD *arcn) 365 { 366 HD_CPIO *hd; 367 int nsz; 368 HD_CPIO hdblk; 369 370 /* 371 * check and repair truncated device and inode fields in the header 372 */ 373 if (map_dev(arcn, (u_long)CPIO_MASK, (u_long)CPIO_MASK) < 0) 374 return(-1); 375 376 arcn->pad = 0L; 377 nsz = arcn->nlen + 1; 378 hd = &hdblk; 379 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) 380 arcn->sb.st_rdev = 0; 381 382 switch(arcn->type) { 383 case PAX_CTG: 384 case PAX_REG: 385 case PAX_HRG: 386 /* 387 * set data size for file data 388 */ 389 if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize, 390 sizeof(hd->c_filesize), OCT)) { 391 paxwarn(1,"File is too large for cpio format %s", 392 arcn->org_name); 393 return(1); 394 } 395 break; 396 case PAX_SLK: 397 /* 398 * set data size to hold link name 399 */ 400 if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize, 401 sizeof(hd->c_filesize), OCT)) 402 goto out; 403 break; 404 default: 405 /* 406 * all other file types have no file data 407 */ 408 if (ul_asc((u_long)0, hd->c_filesize, sizeof(hd->c_filesize), 409 OCT)) 410 goto out; 411 break; 412 } 413 414 /* 415 * copy the values to the header using octal ascii 416 */ 417 if (ul_asc((u_long)MAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) || 418 ul_asc((u_long)arcn->sb.st_dev, hd->c_dev, sizeof(hd->c_dev), 419 OCT) || 420 ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino), 421 OCT) || 422 ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode), 423 OCT) || 424 ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid), 425 OCT) || 426 ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid), 427 OCT) || 428 ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink), 429 OCT) || 430 ul_asc((u_long)arcn->sb.st_rdev, hd->c_rdev, sizeof(hd->c_rdev), 431 OCT) || 432 ul_asc((u_long)arcn->sb.st_mtime,hd->c_mtime,sizeof(hd->c_mtime), 433 OCT) || 434 ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), OCT)) 435 goto out; 436 437 /* 438 * write the file name to the archive 439 */ 440 if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_CPIO)) < 0) || 441 (wr_rdbuf(arcn->name, nsz) < 0)) { 442 paxwarn(1, "Unable to write cpio header for %s", arcn->org_name); 443 return(-1); 444 } 445 446 /* 447 * if this file has data, we are done. The caller will write the file 448 * data, if we are link tell caller we are done, go to next file 449 */ 450 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || 451 (arcn->type == PAX_HRG)) 452 return(0); 453 if (arcn->type != PAX_SLK) 454 return(1); 455 456 /* 457 * write the link name to the archive, tell the caller to go to the 458 * next file as we are done. 459 */ 460 if (wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) { 461 paxwarn(1,"Unable to write cpio link name for %s",arcn->org_name); 462 return(-1); 463 } 464 return(1); 465 466 out: 467 /* 468 * header field is out of range 469 */ 470 paxwarn(1, "Cpio header field is too small to store file %s", 471 arcn->org_name); 472 return(1); 473 } 474 475 /* 476 * Routines common to the system VR4 version of cpio (with/without file CRC) 477 */ 478 479 /* 480 * vcpio_id() 481 * determine if a block given to us is a valid system VR4 cpio header 482 * WITHOUT crc. WATCH it the magic cookies are in OCTAL, the header 483 * uses HEX 484 * Return: 485 * 0 if a valid header, -1 otherwise 486 */ 487 488 int 489 vcpio_id(char *blk, int size) 490 { 491 if ((size < (int)sizeof(HD_VCPIO)) || 492 (strncmp(blk, AVMAGIC, sizeof(AVMAGIC) - 1) != 0)) 493 return(-1); 494 return(0); 495 } 496 497 /* 498 * crc_id() 499 * determine if a block given to us is a valid system VR4 cpio header 500 * WITH crc. WATCH it the magic cookies are in OCTAL the header uses HEX 501 * Return: 502 * 0 if a valid header, -1 otherwise 503 */ 504 505 int 506 crc_id(char *blk, int size) 507 { 508 if ((size < (int)sizeof(HD_VCPIO)) || 509 (strncmp(blk, AVCMAGIC, (int)sizeof(AVCMAGIC) - 1) != 0)) 510 return(-1); 511 return(0); 512 } 513 514 /* 515 * crc_strd() 516 w set file data CRC calculations. Fire up the hard link detection code 517 * Return: 518 * 0 if ok -1 otherwise (the return values of lnk_start()) 519 */ 520 521 int 522 crc_strd(void) 523 { 524 docrc = 1; 525 return(lnk_start()); 526 } 527 528 /* 529 * vcpio_rd() 530 * determine if a buffer is a system VR4 archive entry. (with/without CRC) 531 * convert and store the values in the ARCHD parameter. 532 * Return: 533 * 0 if a valid header, -1 otherwise. 534 */ 535 536 int 537 vcpio_rd(ARCHD *arcn, char *buf) 538 { 539 HD_VCPIO *hd; 540 dev_t devminor; 541 dev_t devmajor; 542 int nsz; 543 544 /* 545 * during the id phase it was determined if we were using CRC, use the 546 * proper id routine. 547 */ 548 if (docrc) { 549 if (crc_id(buf, sizeof(HD_VCPIO)) < 0) 550 return(-1); 551 } else { 552 if (vcpio_id(buf, sizeof(HD_VCPIO)) < 0) 553 return(-1); 554 } 555 556 memset(arcn, 0, sizeof *arcn); 557 hd = (HD_VCPIO *)buf; 558 559 /* 560 * extract the hex ascii fields from the header 561 */ 562 arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), HEX); 563 arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), HEX); 564 arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), HEX); 565 arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), HEX); 566 arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime,sizeof(hd->c_mtime),HEX); 567 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; 568 arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize, 569 sizeof(hd->c_filesize), HEX); 570 arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink), 571 HEX); 572 devmajor = (dev_t)asc_ul(hd->c_maj, sizeof(hd->c_maj), HEX); 573 devminor = (dev_t)asc_ul(hd->c_min, sizeof(hd->c_min), HEX); 574 arcn->sb.st_dev = TODEV(devmajor, devminor); 575 devmajor = (dev_t)asc_ul(hd->c_rmaj, sizeof(hd->c_maj), HEX); 576 devminor = (dev_t)asc_ul(hd->c_rmin, sizeof(hd->c_min), HEX); 577 arcn->sb.st_rdev = TODEV(devmajor, devminor); 578 arcn->crc = asc_ul(hd->c_chksum, sizeof(hd->c_chksum), HEX); 579 580 /* 581 * check the length of the file name, if ok read it in, return -1 if 582 * bogus 583 */ 584 if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),HEX)) < 2) 585 return(-1); 586 arcn->nlen = nsz - 1; 587 if (rd_nm(arcn, nsz) < 0) 588 return(-1); 589 590 /* 591 * skip padding. header + filename is aligned to 4 byte boundaries 592 */ 593 if (rd_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0) 594 return(-1); 595 596 /* 597 * if not a link (or a file with no data), calculate pad size (for 598 * padding which follows the file data), clear the link name and return 599 */ 600 if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) { 601 /* 602 * we have a valid header (not a link) 603 */ 604 arcn->pad = VCPIO_PAD(arcn->sb.st_size); 605 return(com_rd(arcn)); 606 } 607 608 /* 609 * read in the link name and skip over the padding 610 */ 611 if ((rd_ln_nm(arcn) < 0) || 612 (rd_skip((off_t)(VCPIO_PAD(arcn->sb.st_size))) < 0)) 613 return(-1); 614 615 /* 616 * we have a valid header (with a link) 617 */ 618 return(com_rd(arcn)); 619 } 620 621 /* 622 * vcpio_endrd() 623 * no cleanup needed here, just return size of the trailer (for append) 624 * Return: 625 * size of trailer header in this format 626 */ 627 628 off_t 629 vcpio_endrd(void) 630 { 631 return((off_t)(sizeof(HD_VCPIO) + sizeof(TRAILER) + 632 (VCPIO_PAD(sizeof(HD_VCPIO) + sizeof(TRAILER))))); 633 } 634 635 /* 636 * crc_stwr() 637 * start up the device mapping table, enable crc file calculation 638 * Return: 639 * 0 if ok, -1 otherwise (what dev_start() returns) 640 */ 641 642 int 643 crc_stwr(void) 644 { 645 docrc = 1; 646 return(dev_start()); 647 } 648 649 /* 650 * vcpio_wr() 651 * copy the data in the ARCHD to buffer in system VR4 cpio 652 * (with/without crc) format. 653 * Return 654 * 0 if file has data to be written after the header, 1 if file has 655 * NO data to write after the header, -1 if archive write failed 656 */ 657 658 int 659 vcpio_wr(ARCHD *arcn) 660 { 661 HD_VCPIO *hd; 662 unsigned int nsz; 663 HD_VCPIO hdblk; 664 665 /* 666 * check and repair truncated device and inode fields in the cpio 667 * header 668 */ 669 if (map_dev(arcn, (u_long)VCPIO_MASK, (u_long)VCPIO_MASK) < 0) 670 return(-1); 671 nsz = arcn->nlen + 1; 672 hd = &hdblk; 673 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) 674 arcn->sb.st_rdev = 0; 675 676 /* 677 * add the proper magic value depending whether we were asked for 678 * file data crc's, and the crc if needed. 679 */ 680 if (docrc) { 681 if (ul_asc((u_long)VCMAGIC, hd->c_magic, sizeof(hd->c_magic), 682 OCT) || 683 ul_asc((u_long)arcn->crc,hd->c_chksum,sizeof(hd->c_chksum), 684 HEX)) 685 goto out; 686 } else { 687 if (ul_asc((u_long)VMAGIC, hd->c_magic, sizeof(hd->c_magic), 688 OCT) || 689 ul_asc((u_long)0L, hd->c_chksum, sizeof(hd->c_chksum),HEX)) 690 goto out; 691 } 692 693 switch(arcn->type) { 694 case PAX_CTG: 695 case PAX_REG: 696 case PAX_HRG: 697 /* 698 * caller will copy file data to the archive. tell him how 699 * much to pad. 700 */ 701 arcn->pad = VCPIO_PAD(arcn->sb.st_size); 702 if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize, 703 sizeof(hd->c_filesize), HEX)) { 704 paxwarn(1,"File is too large for sv4cpio format %s", 705 arcn->org_name); 706 return(1); 707 } 708 break; 709 case PAX_SLK: 710 /* 711 * no file data for the caller to process, the file data has 712 * the size of the link 713 */ 714 arcn->pad = 0L; 715 if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize, 716 sizeof(hd->c_filesize), HEX)) 717 goto out; 718 break; 719 default: 720 /* 721 * no file data for the caller to process 722 */ 723 arcn->pad = 0L; 724 if (ul_asc((u_long)0L, hd->c_filesize, sizeof(hd->c_filesize), 725 HEX)) 726 goto out; 727 break; 728 } 729 730 /* 731 * set the other fields in the header 732 */ 733 if (ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino), 734 HEX) || 735 ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode), 736 HEX) || 737 ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid), 738 HEX) || 739 ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid), 740 HEX) || 741 ul_asc((u_long)arcn->sb.st_mtime, hd->c_mtime, sizeof(hd->c_mtime), 742 HEX) || 743 ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink), 744 HEX) || 745 ul_asc((u_long)MAJOR(arcn->sb.st_dev),hd->c_maj, sizeof(hd->c_maj), 746 HEX) || 747 ul_asc((u_long)MINOR(arcn->sb.st_dev),hd->c_min, sizeof(hd->c_min), 748 HEX) || 749 ul_asc((u_long)MAJOR(arcn->sb.st_rdev),hd->c_rmaj,sizeof(hd->c_maj), 750 HEX) || 751 ul_asc((u_long)MINOR(arcn->sb.st_rdev),hd->c_rmin,sizeof(hd->c_min), 752 HEX) || 753 ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), HEX)) 754 goto out; 755 756 /* 757 * write the header, the file name and padding as required. 758 */ 759 if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_VCPIO)) < 0) || 760 (wr_rdbuf(arcn->name, (int)nsz) < 0) || 761 (wr_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)) { 762 paxwarn(1,"Could not write sv4cpio header for %s",arcn->org_name); 763 return(-1); 764 } 765 766 /* 767 * if we have file data, tell the caller we are done, copy the file 768 */ 769 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || 770 (arcn->type == PAX_HRG)) 771 return(0); 772 773 /* 774 * if we are not a link, tell the caller we are done, go to next file 775 */ 776 if (arcn->type != PAX_SLK) 777 return(1); 778 779 /* 780 * write the link name, tell the caller we are done. 781 */ 782 if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) || 783 (wr_skip((off_t)(VCPIO_PAD(arcn->ln_nlen))) < 0)) { 784 paxwarn(1,"Could not write sv4cpio link name for %s", 785 arcn->org_name); 786 return(-1); 787 } 788 return(1); 789 790 out: 791 /* 792 * header field is out of range 793 */ 794 paxwarn(1,"Sv4cpio header field is too small for file %s",arcn->org_name); 795 return(1); 796 } 797 798 /* 799 * Routines common to the old binary header cpio 800 */ 801 802 /* 803 * bcpio_id() 804 * determine if a block given to us is an old binary cpio header 805 * (with/without header byte swapping) 806 * Return: 807 * 0 if a valid header, -1 otherwise 808 */ 809 810 int 811 bcpio_id(char *blk, int size) 812 { 813 if (size < (int)sizeof(HD_BCPIO)) 814 return(-1); 815 816 /* 817 * check both normal and byte swapped magic cookies 818 */ 819 if (((u_short)SHRT_EXT(blk)) == MAGIC) 820 return(0); 821 if (((u_short)RSHRT_EXT(blk)) == MAGIC) { 822 if (!swp_head) 823 ++swp_head; 824 return(0); 825 } 826 return(-1); 827 } 828 829 /* 830 * bcpio_rd() 831 * determine if a buffer is an old binary archive entry. (It may have byte 832 * swapped header) convert and store the values in the ARCHD parameter. 833 * This is a very old header format and should not really be used. 834 * Return: 835 * 0 if a valid header, -1 otherwise. 836 */ 837 838 int 839 bcpio_rd(ARCHD *arcn, char *buf) 840 { 841 HD_BCPIO *hd; 842 int nsz; 843 844 /* 845 * check the header 846 */ 847 if (bcpio_id(buf, sizeof(HD_BCPIO)) < 0) 848 return(-1); 849 850 memset(arcn, 0, sizeof *arcn); 851 hd = (HD_BCPIO *)buf; 852 if (swp_head) { 853 /* 854 * header has swapped bytes on 16 bit boundaries 855 */ 856 arcn->sb.st_dev = (dev_t)(RSHRT_EXT(hd->h_dev)); 857 arcn->sb.st_ino = (ino_t)(RSHRT_EXT(hd->h_ino)); 858 arcn->sb.st_mode = (mode_t)(RSHRT_EXT(hd->h_mode)); 859 arcn->sb.st_uid = (uid_t)(RSHRT_EXT(hd->h_uid)); 860 arcn->sb.st_gid = (gid_t)(RSHRT_EXT(hd->h_gid)); 861 arcn->sb.st_nlink = (nlink_t)(RSHRT_EXT(hd->h_nlink)); 862 arcn->sb.st_rdev = (dev_t)(RSHRT_EXT(hd->h_rdev)); 863 arcn->sb.st_mtime = (time_t)(RSHRT_EXT(hd->h_mtime_1)); 864 arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) | 865 ((time_t)(RSHRT_EXT(hd->h_mtime_2))); 866 arcn->sb.st_size = (off_t)(RSHRT_EXT(hd->h_filesize_1)); 867 arcn->sb.st_size = (arcn->sb.st_size << 16) | 868 ((off_t)(RSHRT_EXT(hd->h_filesize_2))); 869 nsz = (int)(RSHRT_EXT(hd->h_namesize)); 870 } else { 871 arcn->sb.st_dev = (dev_t)(SHRT_EXT(hd->h_dev)); 872 arcn->sb.st_ino = (ino_t)(SHRT_EXT(hd->h_ino)); 873 arcn->sb.st_mode = (mode_t)(SHRT_EXT(hd->h_mode)); 874 arcn->sb.st_uid = (uid_t)(SHRT_EXT(hd->h_uid)); 875 arcn->sb.st_gid = (gid_t)(SHRT_EXT(hd->h_gid)); 876 arcn->sb.st_nlink = (nlink_t)(SHRT_EXT(hd->h_nlink)); 877 arcn->sb.st_rdev = (dev_t)(SHRT_EXT(hd->h_rdev)); 878 arcn->sb.st_mtime = (time_t)(SHRT_EXT(hd->h_mtime_1)); 879 arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) | 880 ((time_t)(SHRT_EXT(hd->h_mtime_2))); 881 arcn->sb.st_size = (off_t)(SHRT_EXT(hd->h_filesize_1)); 882 arcn->sb.st_size = (arcn->sb.st_size << 16) | 883 ((off_t)(SHRT_EXT(hd->h_filesize_2))); 884 nsz = (int)(SHRT_EXT(hd->h_namesize)); 885 } 886 arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; 887 888 /* 889 * check the file name size, if bogus give up. otherwise read the file 890 * name 891 */ 892 if (nsz < 2) 893 return(-1); 894 arcn->nlen = nsz - 1; 895 if (rd_nm(arcn, nsz) < 0) 896 return(-1); 897 898 /* 899 * header + file name are aligned to 2 byte boundaries, skip if needed 900 */ 901 if (rd_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0) 902 return(-1); 903 904 /* 905 * if not a link (or a file with no data), calculate pad size (for 906 * padding which follows the file data), clear the link name and return 907 */ 908 if (((arcn->sb.st_mode & C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)){ 909 /* 910 * we have a valid header (not a link) 911 */ 912 arcn->pad = BCPIO_PAD(arcn->sb.st_size); 913 return(com_rd(arcn)); 914 } 915 916 if ((rd_ln_nm(arcn) < 0) || 917 (rd_skip((off_t)(BCPIO_PAD(arcn->sb.st_size))) < 0)) 918 return(-1); 919 920 /* 921 * we have a valid header (with a link) 922 */ 923 return(com_rd(arcn)); 924 } 925 926 /* 927 * bcpio_endrd() 928 * no cleanup needed here, just return size of the trailer (for append) 929 * Return: 930 * size of trailer header in this format 931 */ 932 933 off_t 934 bcpio_endrd(void) 935 { 936 return((off_t)(sizeof(HD_BCPIO) + sizeof(TRAILER) + 937 (BCPIO_PAD(sizeof(HD_BCPIO) + sizeof(TRAILER))))); 938 } 939 940 /* 941 * bcpio_wr() 942 * copy the data in the ARCHD to buffer in old binary cpio format 943 * There is a real chance of field overflow with this critter. So we 944 * always check that the conversion is ok. nobody in their right mind 945 * should write an archive in this format... 946 * Return 947 * 0 if file has data to be written after the header, 1 if file has NO 948 * data to write after the header, -1 if archive write failed 949 */ 950 951 int 952 bcpio_wr(ARCHD *arcn) 953 { 954 HD_BCPIO *hd; 955 int nsz; 956 HD_BCPIO hdblk; 957 off_t t_offt; 958 int t_int; 959 time_t t_timet; 960 961 /* 962 * check and repair truncated device and inode fields in the cpio 963 * header 964 */ 965 if (map_dev(arcn, (u_long)BCPIO_MASK, (u_long)BCPIO_MASK) < 0) 966 return(-1); 967 968 if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) 969 arcn->sb.st_rdev = 0; 970 hd = &hdblk; 971 972 switch(arcn->type) { 973 case PAX_CTG: 974 case PAX_REG: 975 case PAX_HRG: 976 /* 977 * caller will copy file data to the archive. tell him how 978 * much to pad. 979 */ 980 arcn->pad = BCPIO_PAD(arcn->sb.st_size); 981 hd->h_filesize_1[0] = CHR_WR_0(arcn->sb.st_size); 982 hd->h_filesize_1[1] = CHR_WR_1(arcn->sb.st_size); 983 hd->h_filesize_2[0] = CHR_WR_2(arcn->sb.st_size); 984 hd->h_filesize_2[1] = CHR_WR_3(arcn->sb.st_size); 985 t_offt = (off_t)(SHRT_EXT(hd->h_filesize_1)); 986 t_offt = (t_offt<<16) | ((off_t)(SHRT_EXT(hd->h_filesize_2))); 987 if (arcn->sb.st_size != t_offt) { 988 paxwarn(1,"File is too large for bcpio format %s", 989 arcn->org_name); 990 return(1); 991 } 992 break; 993 case PAX_SLK: 994 /* 995 * no file data for the caller to process, the file data has 996 * the size of the link 997 */ 998 arcn->pad = 0L; 999 hd->h_filesize_1[0] = CHR_WR_0(arcn->ln_nlen); 1000 hd->h_filesize_1[1] = CHR_WR_1(arcn->ln_nlen); 1001 hd->h_filesize_2[0] = CHR_WR_2(arcn->ln_nlen); 1002 hd->h_filesize_2[1] = CHR_WR_3(arcn->ln_nlen); 1003 t_int = (int)(SHRT_EXT(hd->h_filesize_1)); 1004 t_int = (t_int << 16) | ((int)(SHRT_EXT(hd->h_filesize_2))); 1005 if (arcn->ln_nlen != t_int) 1006 goto out; 1007 break; 1008 default: 1009 /* 1010 * no file data for the caller to process 1011 */ 1012 arcn->pad = 0L; 1013 hd->h_filesize_1[0] = (char)0; 1014 hd->h_filesize_1[1] = (char)0; 1015 hd->h_filesize_2[0] = (char)0; 1016 hd->h_filesize_2[1] = (char)0; 1017 break; 1018 } 1019 1020 /* 1021 * build up the rest of the fields 1022 */ 1023 hd->h_magic[0] = CHR_WR_2(MAGIC); 1024 hd->h_magic[1] = CHR_WR_3(MAGIC); 1025 hd->h_dev[0] = CHR_WR_2(arcn->sb.st_dev); 1026 hd->h_dev[1] = CHR_WR_3(arcn->sb.st_dev); 1027 if (arcn->sb.st_dev != (dev_t)(SHRT_EXT(hd->h_dev))) 1028 goto out; 1029 hd->h_ino[0] = CHR_WR_2(arcn->sb.st_ino); 1030 hd->h_ino[1] = CHR_WR_3(arcn->sb.st_ino); 1031 if (arcn->sb.st_ino != (ino_t)(SHRT_EXT(hd->h_ino))) 1032 goto out; 1033 hd->h_mode[0] = CHR_WR_2(arcn->sb.st_mode); 1034 hd->h_mode[1] = CHR_WR_3(arcn->sb.st_mode); 1035 if (arcn->sb.st_mode != (mode_t)(SHRT_EXT(hd->h_mode))) 1036 goto out; 1037 hd->h_uid[0] = CHR_WR_2(arcn->sb.st_uid); 1038 hd->h_uid[1] = CHR_WR_3(arcn->sb.st_uid); 1039 if (arcn->sb.st_uid != (uid_t)(SHRT_EXT(hd->h_uid))) 1040 goto out; 1041 hd->h_gid[0] = CHR_WR_2(arcn->sb.st_gid); 1042 hd->h_gid[1] = CHR_WR_3(arcn->sb.st_gid); 1043 if (arcn->sb.st_gid != (gid_t)(SHRT_EXT(hd->h_gid))) 1044 goto out; 1045 hd->h_nlink[0] = CHR_WR_2(arcn->sb.st_nlink); 1046 hd->h_nlink[1] = CHR_WR_3(arcn->sb.st_nlink); 1047 if (arcn->sb.st_nlink != (nlink_t)(SHRT_EXT(hd->h_nlink))) 1048 goto out; 1049 hd->h_rdev[0] = CHR_WR_2(arcn->sb.st_rdev); 1050 hd->h_rdev[1] = CHR_WR_3(arcn->sb.st_rdev); 1051 if (arcn->sb.st_rdev != (dev_t)(SHRT_EXT(hd->h_rdev))) 1052 goto out; 1053 hd->h_mtime_1[0] = CHR_WR_0(arcn->sb.st_mtime); 1054 hd->h_mtime_1[1] = CHR_WR_1(arcn->sb.st_mtime); 1055 hd->h_mtime_2[0] = CHR_WR_2(arcn->sb.st_mtime); 1056 hd->h_mtime_2[1] = CHR_WR_3(arcn->sb.st_mtime); 1057 t_timet = (time_t)(SHRT_EXT(hd->h_mtime_1)); 1058 t_timet = (t_timet << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2))); 1059 if (arcn->sb.st_mtime != t_timet) 1060 goto out; 1061 nsz = arcn->nlen + 1; 1062 hd->h_namesize[0] = CHR_WR_2(nsz); 1063 hd->h_namesize[1] = CHR_WR_3(nsz); 1064 if (nsz != (int)(SHRT_EXT(hd->h_namesize))) 1065 goto out; 1066 1067 /* 1068 * write the header, the file name and padding as required. 1069 */ 1070 if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_BCPIO)) < 0) || 1071 (wr_rdbuf(arcn->name, nsz) < 0) || 1072 (wr_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)) { 1073 paxwarn(1, "Could not write bcpio header for %s", arcn->org_name); 1074 return(-1); 1075 } 1076 1077 /* 1078 * if we have file data, tell the caller we are done 1079 */ 1080 if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || 1081 (arcn->type == PAX_HRG)) 1082 return(0); 1083 1084 /* 1085 * if we are not a link, tell the caller we are done, go to next file 1086 */ 1087 if (arcn->type != PAX_SLK) 1088 return(1); 1089 1090 /* 1091 * write the link name, tell the caller we are done. 1092 */ 1093 if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) || 1094 (wr_skip((off_t)(BCPIO_PAD(arcn->ln_nlen))) < 0)) { 1095 paxwarn(1,"Could not write bcpio link name for %s",arcn->org_name); 1096 return(-1); 1097 } 1098 return(1); 1099 1100 out: 1101 /* 1102 * header field is out of range 1103 */ 1104 paxwarn(1,"Bcpio header field is too small for file %s", arcn->org_name); 1105 return(1); 1106 } 1107