1.\"- 2.\" Copyright (c) 1989, 1990, 1993 3.\" The Regents of the University of California. All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. Neither the name of the University nor the names of its contributors 14.\" may be used to endorse or promote products derived from this software 15.\" without specific prior written permission. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 18.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 21.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27.\" SUCH DAMAGE. 28.\" 29.\" @(#)df.1 8.3 (Berkeley) 5/8/95 30.\" $FreeBSD$ 31.\" 32.Dd March 11, 2022 33.Dt DF 1 34.Os 35.Sh NAME 36.Nm df 37.Nd display free disk space 38.Sh SYNOPSIS 39.Nm 40.Op Fl -libxo 41.Op Fl b | g | H | h | k | m | P 42.Op Fl acilnT 43.Op Fl \&, 44.Op Fl t Ar type 45.Op Ar file | filesystem ... 46.Sh DESCRIPTION 47The 48.Nm 49utility 50displays statistics about the amount of free disk space on the specified 51mounted 52.Ar file system 53or on the file system of which 54.Ar file 55is a part. 56By default block counts are displayed with an assumed block size of 57512 bytes. 58If neither a file or a file system operand is specified, 59statistics for all mounted file systems are displayed 60(subject to the 61.Fl t 62option below). 63.Pp 64The following options are available: 65.Bl -tag -width indent 66.It Fl -libxo 67Generate output via 68.Xr libxo 3 69in a selection of different human and machine readable formats. 70See 71.Xr xo_parse_args 3 72for details on command line arguments. 73.It Fl a 74Show all mount points, including those that were mounted with the 75.Dv MNT_IGNORE 76flag. 77This is implied for file systems specified on the command line. 78.It Fl b 79Explicitly use 512 byte blocks, overriding any 80.Ev BLOCKSIZE 81specification from the environment. 82This is the same as the 83.Fl P 84option. 85The 86.Fl k 87option overrides this option. 88.It Fl c 89Display a grand total. 90.It Fl g 91Use 1073741824 byte (1 Gibibyte) blocks rather than the default. 92This overrides any 93.Ev BLOCKSIZE 94specification from the environment. 95.It Fl h 96.Dq Human-readable 97output. 98Use unit suffixes: Byte, Kibibyte, Mebibyte, Gibibyte, Tebibyte and 99Pebibyte (based on powers of 1024) in order to reduce the number of 100digits to four or fewer. 101.It Fl H , Fl Fl si 102Same as 103.Fl h 104but based on powers of 1000. 105.It Fl i 106Include statistics on the number of free and used inodes. 107In conjunction with the 108.Fl h 109or 110.Fl H 111options, the number of inodes is scaled by powers of 1000. 112In case the filesystem has no inodes then 113.Sq - 114is displayed instead of the usage percentage. 115.It Fl k 116Use 1024 byte (1 Kibibyte) blocks rather than the default. 117This overrides the 118.Fl P 119option and any 120.Ev BLOCKSIZE 121specification from the environment. 122.It Fl l 123Select locally-mounted file system for display. 124If used in combination with the 125.Fl t Ar type 126option, file system types will be added or excluded acccording to the 127parameters of that option. 128.It Fl m 129Use 1048576 byte (1 Mebibyte) blocks rather than the default. 130This overrides any 131.Ev BLOCKSIZE 132specification from the environment. 133.It Fl n 134Print out the previously obtained statistics from the file systems. 135This option should be used if it is possible that one or more 136file systems are in a state such that they will not be able to provide 137statistics without a long delay. 138When this option is specified, 139.Nm 140will not request new statistics from the file systems, but will respond 141with the possibly stale statistics that were previously obtained. 142.It Fl P 143Explicitly use 512 byte blocks, overriding any 144.Ev BLOCKSIZE 145specification from the environment. 146This is the same as the 147.Fl b 148option. 149The 150.Fl k 151option overrides this option. 152.It Fl t Ar type 153Select file systems to display. 154More than one type may be specified in a comma separated list. 155The list of file system types can be prefixed with 156.Dq no 157to specify the file system types for which action should 158.Em not 159be taken. 160If used in combination with the 161.Fl l 162option, the parameters of this option will modify the list of 163locally-mounted file systems selected by the 164.Fl l 165option. 166For example, the 167.Nm 168command: 169.Bd -literal -offset indent 170df -t nonfs,nullfs 171.Ed 172.Pp 173lists all file systems except those of type NFS and NULLFS. 174The 175.Xr lsvfs 1 176command can be used to find out the types of file systems 177that are available on the system. 178.It Fl T 179Include file system type. 180.It Fl , 181(Comma) Print sizes grouped and separated by thousands using the 182non-monetary separator returned by 183.Xr localeconv 3 , 184typically a comma or period. 185If no locale is set, or the locale does not have a non-monetary separator, this 186option has no effect. 187.El 188.Sh ENVIRONMENT 189.Bl -tag -width BLOCKSIZE 190.It Ev BLOCKSIZE 191Specifies the units in which to report block counts. 192This uses 193.Xr getbsize 3 , 194which allows units of bytes or numbers scaled with the letters 195.Em k 196(for multiples of 1024 bytes), 197.Em m 198(for multiples of 1048576 bytes) or 199.Em g 200(for gibibytes). 201The allowed range is 512 bytes to 1 GB. 202If the value is outside, it will be set to the appropriate limit. 203.El 204.Sh EXAMPLES 205Show human readable free disk space for all mount points including file system 206type: 207.Bd -literal -offset indent 208$ df -ahT 209Filesystem Type Size Used Avail Capacity Mounted on 210/dev/ada1p2 ufs 213G 152G 44G 78% / 211devfs devfs 1.0K 1.0K 0B 100% /dev 212/dev/ada0p1 ufs 1.8T 168G 1.5T 10% /data 213linsysfs linsysfs 4.0K 4.0K 0B 100% /compat/linux/sys 214/dev/da0 msdosfs 7.6G 424M 7.2G 5% /mnt/usb 215.Ed 216.Pp 217Show previously collected data including inode statistics except for devfs or 218linsysfs file systems. 219Note that the 220.Dq no 221prefix affects all the file systems in the list and the 222.Fl t 223option can be specified only once: 224.Bd -literal -offset indent 225$ df -i -n -t nodevfs,linsysfs 226Filesystem 1K-blocks Used Avail Capacity iused ifree %iused 227Mounted on 228/dev/ada1p2 223235736 159618992 45757888 78% 1657590 27234568 6% / 229/dev/ada0p1 1892163184 176319420 1564470712 10% 1319710 243300576 1% 230/data 231/dev/da0 7989888 433664 7556224 5% 0 0 100% 232/mnt/usb 233.Ed 234.Pp 235Show human readable information for the file system containing the file 236.Pa /etc/rc.conf : 237.Bd -literal -offset indent 238$ df -h /etc/rc.conf 239Filesystem Size Used Avail Capacity Mounted on 240/dev/ada1p2 213G 152G 44G 78% / 241.Ed 242.Pp 243Same as above but specifying some file system: 244.Bd -literal -offset indent 245$ df -h /dev/ada1p2 246Filesystem Size Used Avail Capacity Mounted on 247/dev/ada1p2 213G 152G 44G 78% / 248.Ed 249.Sh SEE ALSO 250.Xr lsvfs 1 , 251.Xr quota 1 , 252.Xr fstatfs 2 , 253.Xr getfsstat 2 , 254.Xr statfs 2 , 255.Xr getbsize 3 , 256.Xr getmntinfo 3 , 257.Xr libxo 3 , 258.Xr localeconv 3 , 259.Xr xo_parse_args 3 , 260.Xr fstab 5 , 261.Xr mount 8 , 262.Xr pstat 8 , 263.Xr quot 8 , 264.Xr swapinfo 8 265.Sh STANDARDS 266With the exception of most options, 267the 268.Nm 269utility conforms to 270.St -p1003.1-2004 , 271which defines only the 272.Fl k , P 273and 274.Fl t 275options. 276.Sh HISTORY 277A 278.Nm 279command appeared in 280.At v1 . 281.Sh BUGS 282The 283.Fl n 284flag is ignored if a file or file system is specified. 285Also, if a mount 286point is not accessible by the user, it is possible that the file system 287information could be stale. 288.Pp 289The 290.Fl b 291and 292.Fl P 293options are identical. 294The former comes from the BSD tradition, and the latter is required 295for 296.St -p1003.1-2004 297conformity. 298