1.\" Copyright (c) 1980, 1990, 1993 2.\" The Regents of the University of California. All rights reserved. 3.\" 4.\" This code is derived from software contributed to Berkeley by 5.\" the Institute of Electrical and Electronics Engineers, Inc. 6.\" 7.\" Redistribution and use in source and binary forms, with or without 8.\" modification, are permitted provided that the following conditions 9.\" are met: 10.\" 1. Redistributions of source code must retain the above copyright 11.\" notice, this list of conditions and the following disclaimer. 12.\" 2. Redistributions in binary form must reproduce the above copyright 13.\" notice, this list of conditions and the following disclaimer in the 14.\" documentation and/or other materials provided with the distribution. 15.\" 3. All advertising materials mentioning features or use of this software 16.\" must display the following acknowledgement: 17.\" This product includes software developed by the University of 18.\" California, Berkeley and its contributors. 19.\" 4. Neither the name of the University nor the names of its contributors 20.\" may be used to endorse or promote products derived from this software 21.\" without specific prior written permission. 22.\" 23.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33.\" SUCH DAMAGE. 34.\" 35.\" @(#)date.1 8.3 (Berkeley) 4/28/95 36.\" $FreeBSD$ 37.\" 38.Dd November 17, 1993 39.Dt DATE 1 40.Os 41.Sh NAME 42.Nm date 43.Nd display or set date and time 44.Sh SYNOPSIS 45.Nm 46.Op Fl jnu 47.Op Fl d Ar dst 48.Op Fl r Ar seconds 49.Op Fl t Ar minutes_west 50.Oo 51.Fl v 52.Sm off 53.Op Cm + | - Xo 54.Ar val Op Ar ymwdHMS 55.Xc 56.Sm on 57.Oc 58.Ar ...\& 59.Oo 60.Fl f 61.Ar fmt date | 62.Sm off 63.Oo Oo Oo Oo Oo 64.Ar cc Oc 65.Ar yy Oc 66.Ar mm Oc 67.Ar dd Oc 68.Ar HH Oc 69.Ar MM Op Ar .ss 70.Sm on 71.Oc 72.Op Cm + Ns Ar format 73.Sh DESCRIPTION 74When invoked without arguments, the 75.Nm 76utility displays the current date and time. 77Otherwise, depending on the options specified, 78.Nm 79will set the date and time or print it in a user-defined way. 80.Pp 81Only the superuser may set the date, 82and if the system securelevel (see 83.Xr securelevel 8 ) 84is greater than 1, 85the time may not be changed by more than 1 second. 86.Pp 87The options are as follows: 88.Bl -tag -width Ds 89.It Fl d Ar dst 90Set the kernel's value for daylight saving time. 91If 92.Ar dst 93is non-zero, future calls 94to 95.Xr gettimeofday 2 96will return a non-zero for 97.Fa tz_dsttime . 98.It Fl f 99Use 100.Ar fmt 101as the format string to parse the 102.Ar date 103provided rather than using the default 104.Sm off 105.Oo Oo Oo Oo Oo 106.Ar cc Oc 107.Ar yy Oc 108.Ar mm Oc 109.Ar dd Oc 110.Ar HH 111.Oc Ar MM Op Ar .ss 112.Sm on 113format. 114Parsing is done using 115.Xr strptime 3 . 116.It Fl j 117Do not try to set the date. 118This allows you to use the 119.Fl f 120flag in addition to the 121.Cm + 122option to convert one date format to another. 123.It Fl n 124By default, if the 125.Xr timed 8 126daemon is running, 127.Nm 128sets the time on all of the machines in the local group. 129The 130.Fl n 131option suppresses this behavior and causes the time to be set only on the 132current machine. 133.It Fl r Ar seconds 134Print the date and time represented by 135.Ar seconds , 136where 137.Ar seconds 138is the number of seconds since the Epoch 139(00:00:00 UTC, January 1, 1970; 140see 141.Xr time 3 ) , 142and can be specified in decimal, octal, or hex. 143.It Fl t Ar minutes_west 144Set the system's value for minutes west of 145.Tn GMT . 146.Ar minutes_west 147specifies the number of minutes returned in 148.Fa tz_minuteswest 149by future calls to 150.Xr gettimeofday 2 . 151.It Fl u 152Display or set the date in 153.Tn UTC 154(Coordinated Universal) time. 155.It Fl v 156Adjust (i.e., take the current date and display the result of the 157adjustment; not actually set the date) the second, minute, hour, month 158day, week day, month or year according to 159.Ar val . 160If 161.Ar val 162is preceded with a plus or minus sign, 163the date is adjusted forwards or backwards according to the remaining string, 164otherwise the relevant part of the date is set. 165The date can be adjusted as many times as required using these flags. 166Flags are processed in the order given. 167.Pp 168When setting values 169.Pq rather than adjusting them , 170seconds are in the range 0-59, minutes are in the range 0-59, hours are 171in the range 1-12, month days are in the range 1-31, week days are in the 172range 0-6 173.Pq Sun-Sat , 174months are in the range 1-12 175.Pq Jan-Dec 176and years are in the range 80-38 or 1980-2038. 177.Pp 178If 179.Ar val 180is numeric, one of either 181.Ar y , 182.Ar m , 183.Ar w , 184.Ar d , 185.Ar H , 186.Ar M 187or 188.Ar S 189must be used to specify which part of the date is to be adjusted. 190.Pp 191The week day or month may be specified using a name rather than a 192number. 193If a name is used with the plus 194.Pq or minus 195sign, the date will be put forwards 196.Pq or backwards 197to the next 198.Pq previous 199date that matches the given week day or month. 200This will not adjust the date, 201if the given week day or month is the same as the current one. 202.Pp 203When a date is adjusted to a specific value or in units greater than hours, 204daylight savings time considerations are ignored. 205Adjustments in units of hours or less honor daylight saving time. 206So, assuming the current date is March 26, 0:30 and that the DST adjustment 207means that the clock goes forward at 01:00 to 02:00, using 208.Fl v No +1H 209will adjust the date to March 26, 2:30. 210Likewise, if the date is October 29, 0:30 and the DST adjustment means that 211the clock goes back at 02:00 to 01:00, using 212.Fl v No +3H 213will be necessary to reach October 29, 2:30. 214.Pp 215When the date is adjusted to a specific value that doesn't actually exist 216.Po 217for example March 26, 1:30 BST 2000 in the Europe/London timezone 218.Pc , 219the date will be silently adjusted forwards in units of one hour until it 220reaches a valid time. 221When the date is adjusted to a specific value that occurs twice 222.Pq for example October 29, 1:30 2000 , 223the resulting timezone will be set so that the date matches the earlier of 224the two times. 225.Pp 226Refer to the examples below for further details. 227.El 228.Pp 229An operand with a leading plus 230.Pq Sq + 231sign signals a user-defined format string 232which specifies the format in which to display the date and time. 233The format string may contain any of the conversion specifications 234described in the 235.Xr strftime 3 236manual page, as well as any arbitrary text. 237A newline 238.Pq Ql \en 239character is always output after the characters specified by 240the format string. 241The format string for the default display is 242.Dq +%+ . 243.Pp 244If an operand does not have a leading plus sign, it is interpreted as 245a value for setting the system's notion of the current date and time. 246The canonical representation for setting the date and time is: 247.Pp 248.Bl -tag -width Ds -compact -offset indent 249.It Ar cc 250Century 251.Pq either 19 or 20 252prepended to the abbreviated year. 253.It Ar yy 254Year in abbreviated form 255.Pq e.g. 89 for 1989, 06 for 2006 . 256.It Ar mm 257Numeric month, a number from 1 to 12. 258.It Ar dd 259Day, a number from 1 to 31. 260.It Ar HH 261Hour, a number from 0 to 23. 262.It Ar MM 263Minutes, a number from 0 to 59. 264.It Ar ss 265Seconds, a number from 0 to 61 266.Pq 59 plus a maximum of two leap seconds . 267.El 268.Pp 269Everything but the minutes is optional. 270.Pp 271Time changes for Daylight Saving Time, standard time, leap seconds, 272and leap years are handled automatically. 273.Sh EXAMPLES 274The command: 275.Bd -literal -offset indent 276date "+DATE: %Y-%m-%d%nTIME: %H:%M:%S" 277.Ed 278.Pp 279will display: 280.Bd -literal -offset indent 281DATE: 1987-11-21 282TIME: 13:36:16 283.Ed 284.Pp 285In the Europe/London timezone, the command: 286.Bd -literal -offset indent 287date -v1m -v+1y 288.Ed 289.Pp 290will display: 291.Bd -literal -offset indent 292Sun Jan 4 04:15:24 GMT 1998 293.Ed 294.Pp 295where it is currently Mon Aug 4 04:15:24 BST 1997. 296.Pp 297The command: 298.Bd -literal -offset indent 299date -v1d -v3m -v0y -v-1d 300.Ed 301.Pp 302will display the last day of February in the year 2000: 303.Bd -literal -offset indent 304Tue Feb 29 03:18:00 GMT 2000 305.Ed 306.Pp 307The command: 308.Bd -literal -offset indent 309date -v1d -v+1m -v-1d -v-fri 310.Ed 311.Pp 312will display the last Friday of the month: 313.Bd -literal -offset indent 314Fri Aug 29 04:31:11 BST 1997 315.Ed 316.Pp 317where it is currently Mon Aug 4 04:31:11 BST 1997. 318.Pp 319The command: 320.Bd -literal -offset indent 321date 8506131627 322.Ed 323.Pp 324sets the date to 325.Dq Li "June 13, 1985, 4:27 PM" . 326.Pp 327The command: 328.Bd -literal -offset indent 329date 1432 330.Ed 331.Pp 332sets the time to 333.Li "2:32 PM" , 334without modifying the date. 335.Sh ENVIRONMENT 336The following environment variables affect the execution of 337.Nm : 338.Bl -tag -width Ds 339.It Ev TZ 340The timezone to use when displaying dates. 341The normal format is a pathname relative to 342.Pa /usr/share/zoneinfo . 343For example, the command 344.Dq TZ=America/Los_Angeles date 345displays the current time in California. 346See 347.Xr environ 7 348for more information. 349.El 350.Sh FILES 351.Bl -tag -width /var/log/messages -compact 352.It Pa /var/log/wtmp 353record of date resets and time changes 354.It Pa /var/log/messages 355record of the user setting the time 356.El 357.Sh SEE ALSO 358.Xr gettimeofday 2 , 359.Xr strftime 3 , 360.Xr strptime 3 , 361.Xr utmp 5 , 362.Xr timed 8 363.Rs 364.%T "TSP: The Time Synchronization Protocol for UNIX 4.3BSD" 365.%A R. Gusella 366.%A S. Zatti 367.Re 368.Sh DIAGNOSTICS 369The 370.Nm 371utility exits 0 on success, 1 if unable to set the date, and 2 372if able to set the local date, but unable to set it globally. 373.Pp 374Occasionally, when 375.Xr timed 8 376synchronizes the time on many hosts, the setting of a new time value may 377require more than a few seconds. 378On these occasions, 379.Nm 380prints: 381.Ql Network time being set . 382The message 383.Ql Communication error with timed 384occurs when the communication 385between 386.Nm 387and 388.Xr timed 8 389fails. 390.Sh STANDARDS 391The 392.Nm 393utility is expected to be compatible with 394.St -p1003.2 . 395.Sh HISTORY 396A 397.Nm 398command appeared in 399.At v1 . 400