1# 2# $FreeBSD$ 3# 4# Make command line options: 5# -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 6# -DNO_CLEAN do not clean at all 7# -DNO_PROFILE do not build profiled libraries 8# -DNO_SHARE do not go into share subdir 9# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 10# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 11# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 12# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 13# -DNO_DOCUPDATE do not update doc in ${MAKE} update 14# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 15# TARGET_ARCH="arch" to crossbuild world to a different arch 16 17# 18# The intended user-driven targets are: 19# buildworld - rebuild *everything*, including glue to help do upgrades 20# installworld- install everything built by "buildworld" 21# update - convenient way to update your source tree (eg: cvsup/cvs) 22# 23# Standard targets (not defined here) are documented in the makefiles in 24# /usr/share/mk. These include: 25# obj depend all install clean cleandepend cleanobj 26 27.include <bsd.own.mk> 28 29# We must do share/info early so that installation of info `dir' 30# entries works correctly. Do it first since it is less likely to 31# grow dependencies on include and lib than vice versa. 32# 33# We must do lib and libexec before bin, because if installworld 34# installs a new /bin/sh, the 'make' command will *immediately* 35# use that new version. And the new (dynamically-linked) /bin/sh 36# will expect to find appropriate libraries in /lib and /libexec. 37# 38# We must do etc last for install/distribute to work. 39# 40SUBDIR= share/info include lib libexec bin 41.if ${MK_GAMES} != "no" 42SUBDIR+=games 43.endif 44SUBDIR+=gnu 45.if ${MK_KERBEROS} != "no" 46SUBDIR+=kerberos5 47.endif 48.if ${MK_RESCUE} != "no" 49SUBDIR+=rescue 50.endif 51SUBDIR+=sbin 52.if ${MK_CRYPT} != "no" 53SUBDIR+=secure 54.endif 55.if !defined(NO_SHARE) 56SUBDIR+=share 57.endif 58SUBDIR+=sys usr.bin usr.sbin etc 59 60# These are last, since it is nice to at least get the base system 61# rebuilt before you do them. 62.for _DIR in ${LOCAL_DIRS} 63.if exists(${.CURDIR}/${_DIR}/Makefile) 64SUBDIR+= ${_DIR} 65.endif 66.endfor 67 68.if defined(SUBDIR_OVERRIDE) 69SUBDIR= ${SUBDIR_OVERRIDE} 70.endif 71 72.if defined(NOCLEAN) 73NO_CLEAN= ${NOCLEAN} 74.endif 75.if defined(NO_CLEANDIR) 76CLEANDIR= clean cleandepend 77.else 78CLEANDIR= cleandir 79.endif 80 81CVS?= cvs 82CVSFLAGS?= -A -P -d -I! 83SUP?= /usr/local/bin/cvsup 84SUPFLAGS?= -g -L 2 -P - 85.if defined(SUPHOST) 86SUPFLAGS+= -h ${SUPHOST} 87.endif 88 89MAKEOBJDIRPREFIX?= /usr/obj 90.if !defined(OSRELDATE) 91.if exists(/usr/include/osreldate.h) 92OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 93 /usr/include/osreldate.h 94.else 95OSRELDATE= 0 96.endif 97.endif 98TARGET_ARCH?= ${MACHINE_ARCH} 99.if ${TARGET_ARCH} == ${MACHINE_ARCH} 100TARGET?= ${MACHINE} 101TARGET_CPUTYPE?=${CPUTYPE} 102.else 103TARGET?= ${TARGET_ARCH} 104TARGET_CPUTYPE?= 105.endif 106.if !empty(TARGET_CPUTYPE) 107_TARGET_CPUTYPE=${TARGET_CPUTYPE} 108.else 109_TARGET_CPUTYPE=dummy 110.endif 111_CPUTYPE!= MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \ 112 -f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE 113.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 114.error CPUTYPE global should be set with ?=. 115.endif 116.if make(buildworld) 117BUILD_ARCH!= uname -p 118.if ${MACHINE_ARCH} != ${BUILD_ARCH} 119.error To cross-build, set TARGET_ARCH. 120.endif 121.endif 122.if ${MACHINE} == ${TARGET} && !defined(CROSS_BUILD_TESTING) 123OBJTREE= ${MAKEOBJDIRPREFIX} 124.else 125OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 126.endif 127WORLDTMP= ${OBJTREE}${.CURDIR}/tmp 128# /usr/games added for fortune which depend on strfile 129BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 130XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 131STRICTTMPPATH= ${BPATH}:${XPATH} 132TMPPATH= ${STRICTTMPPATH}:${PATH} 133 134INSTALLTMP!= /usr/bin/mktemp -d -u -t install 135 136# 137# Building a world goes through the following stages 138# 139# 1. legacy stage [BMAKE] 140# This stage is responsible for creating compatibility 141# shims that are needed by the bootstrap-tools, 142# build-tools and cross-tools stages. 143# 1. bootstrap-tools stage [BMAKE] 144# This stage is responsible for creating programs that 145# are needed for backward compatibility reasons. They 146# are not built as cross-tools. 147# 2. build-tools stage [TMAKE] 148# This stage is responsible for creating the object 149# tree and building any tools that are needed during 150# the build process. 151# 3. cross-tools stage [XMAKE] 152# This stage is responsible for creating any tools that 153# are needed for cross-builds. A cross-compiler is one 154# of them. 155# 4. world stage [WMAKE] 156# This stage actually builds the world. 157# 5. install stage (optional) [IMAKE] 158# This stage installs a previously built world. 159# 160 161BOOTSTRAPPING?= 0 162 163# Common environment for world related stages 164CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 165 MACHINE_ARCH=${TARGET_ARCH} \ 166 MACHINE=${TARGET} \ 167 CPUTYPE=${TARGET_CPUTYPE} \ 168 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 169 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 170 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 171 172# bootstrap-tools stage 173BMAKEENV= INSTALL="sh ${.CURDIR}/tools/install.sh" \ 174 PATH=${BPATH}:${PATH} \ 175 WORLDTMP=${WORLDTMP} \ 176 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 177BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 178 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 179 DESTDIR= \ 180 BOOTSTRAPPING=${OSRELDATE} \ 181 -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \ 182 -DWITHOUT_NLS -DNO_PIC -DNO_PROFILE -DNO_SHARED \ 183 -DNO_CPU_CFLAGS -DNO_WARNS 184 185# build-tools stage 186TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 187 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 188 DESTDIR= \ 189 BOOTSTRAPPING=${OSRELDATE} -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS 190 191# cross-tools stage 192XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \ 193 -DWITHOUT_FORTRAN -DWITHOUT_GDB 194 195# world stage 196WMAKEENV= ${CROSSENV} \ 197 _SHLIBDIRPREFIX=${WORLDTMP} \ 198 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 199 PATH=${TMPPATH} 200WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP} 201 202.if ${TARGET_ARCH} == "amd64" 203# 32 bit world 204LIB32TMP= ${OBJTREE}${.CURDIR}/lib32 205 206.if empty(TARGET_CPUTYPE) 207LIB32CPUTYPE= k8 208.else 209LIB32CPUTYPE= ${TARGET_CPUTYPE} 210.endif 211LIB32PREFLAGS= -m32 -march=${LIB32CPUTYPE} -mfancy-math-387 -DCOMPAT_32BIT 212LIB32POSTFLAGS= -I${LIB32TMP}/usr/include \ 213 -L${LIB32TMP}/usr/lib32 \ 214 -B${LIB32TMP}/usr/lib32 215LIB32CC= ${LIB32PREFLAGS} \ 216 ${LIB32POSTFLAGS} 217LIB32CXX= ${LIB32PREFLAGS} -I${LIB32TMP}/usr/include/c++/3.4 \ 218 ${LIB32POSTFLAGS} 219LIB32OBJC= ${LIB32PREFLAGS} -I${LIB32TMP}/usr/include/objc \ 220 ${LIB32POSTFLAGS} 221 222# Yes, the flags are redundant. 223LIB32MAKEENV= MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \ 224 _SHLIBDIRPREFIX=${LIB32TMP} \ 225 MACHINE=i386 \ 226 MACHINE_ARCH=i386 \ 227 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 228 PATH=${TMPPATH} \ 229 CC="${CC} ${LIB32CC}" \ 230 CXX="${CXX} ${LIB32CXX}" \ 231 OBJC="${OBJC} ${LIB32OBJC}" \ 232 LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \ 233 AS="${AS} --32" \ 234 LIBDIR=/usr/lib32 \ 235 SHLIBDIR=/usr/lib32 236 237LIB32MAKE= ${LIB32MAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \ 238 -DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_INFO \ 239 -DWITHOUT_HTML 240LIB32IMAKE= ${LIB32MAKE:NINSTALL=*} -DNO_INCS 241.endif 242 243# install stage 244.if empty(.MAKEFLAGS:M-n) 245IMAKEENV= ${CROSSENV} \ 246 PATH=${STRICTTMPPATH}:${INSTALLTMP} 247.else 248IMAKEENV= ${CROSSENV} \ 249 PATH=${TMPPATH}:${INSTALLTMP} 250.endif 251IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 252 253# kernel stage 254KMAKEENV= ${WMAKEENV} 255KMAKE= ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} 256 257# 258# buildworld 259# 260# Attempt to rebuild the entire system, with reasonable chance of 261# success, regardless of how old your existing system is. 262# 263_worldtmp: 264.if ${.CURDIR:C/[^,]//g} != "" 265# The m4 build of sendmail files doesn't like it if ',' is used 266# anywhere in the path of it's files. 267 @echo 268 @echo "*** Error: path to source tree contains a comma ','" 269 @echo 270 false 271.endif 272 @echo 273 @echo "--------------------------------------------------------------" 274 @echo ">>> Rebuilding the temporary build tree" 275 @echo "--------------------------------------------------------------" 276.if !defined(NO_CLEAN) 277 rm -rf ${WORLDTMP} 278.if ${TARGET_ARCH} == "amd64" 279 rm -rf ${LIB32TMP} 280.endif 281.else 282 rm -rf ${WORLDTMP}/legacy/usr/include 283# XXX - These two can depend on any header file. 284 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 285 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 286.endif 287.for _dir in \ 288 usr/bin usr/games usr/include/c++/3.4 usr/include/sys usr/lib \ 289 usr/libexec usr/sbin usr/share/dict \ 290 usr/share/groff_font/devX100 \ 291 usr/share/groff_font/devX100-12 \ 292 usr/share/groff_font/devX75 \ 293 usr/share/groff_font/devX75-12 \ 294 usr/share/groff_font/devascii \ 295 usr/share/groff_font/devcp1047 \ 296 usr/share/groff_font/devdvi \ 297 usr/share/groff_font/devhtml \ 298 usr/share/groff_font/devkoi8-r \ 299 usr/share/groff_font/devlatin1 \ 300 usr/share/groff_font/devlbp \ 301 usr/share/groff_font/devlj4 \ 302 usr/share/groff_font/devps \ 303 usr/share/groff_font/devutf8 \ 304 usr/share/tmac/mdoc usr/share/tmac/mm 305 mkdir -p ${WORLDTMP}/legacy/${_dir} 306.endfor 307.for _dir in \ 308 lib usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 309 usr/libexec usr/sbin usr/share/misc \ 310 usr/share/snmp/defs usr/share/snmp/mibs 311 mkdir -p ${WORLDTMP}/${_dir} 312.endfor 313 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 314 -p ${WORLDTMP}/usr/include >/dev/null 315 ln -sf ${.CURDIR}/sys ${WORLDTMP} 316.if ${MK_BIND_LIBS} != "no" 317 mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \ 318 -p ${WORLDTMP}/usr/include >/dev/null 319.endif 320_legacy: 321 @echo 322 @echo "--------------------------------------------------------------" 323 @echo ">>> stage 1.1: legacy release compatibility shims" 324 @echo "--------------------------------------------------------------" 325 ${_+_}cd ${.CURDIR}; ${BMAKE} legacy 326_bootstrap-tools: 327 @echo 328 @echo "--------------------------------------------------------------" 329 @echo ">>> stage 1.2: bootstrap tools" 330 @echo "--------------------------------------------------------------" 331 ${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools 332_cleanobj: 333.if !defined(NO_CLEAN) 334 @echo 335 @echo "--------------------------------------------------------------" 336 @echo ">>> stage 2.1: cleaning up the object tree" 337 @echo "--------------------------------------------------------------" 338 ${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 339.if ${TARGET_ARCH} == "amd64" 340 rm -rf ${OBJTREE}/lib32 341.endif 342.endif 343_obj: 344 @echo 345 @echo "--------------------------------------------------------------" 346 @echo ">>> stage 2.2: rebuilding the object tree" 347 @echo "--------------------------------------------------------------" 348 ${_+_}cd ${.CURDIR}; ${WMAKE} par-obj 349_build-tools: 350 @echo 351 @echo "--------------------------------------------------------------" 352 @echo ">>> stage 2.3: build tools" 353 @echo "--------------------------------------------------------------" 354 ${_+_}cd ${.CURDIR}; ${TMAKE} build-tools 355_cross-tools: 356 @echo 357 @echo "--------------------------------------------------------------" 358 @echo ">>> stage 3: cross tools" 359 @echo "--------------------------------------------------------------" 360 ${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools 361_includes: 362 @echo 363 @echo "--------------------------------------------------------------" 364 @echo ">>> stage 4.1: building includes" 365 @echo "--------------------------------------------------------------" 366 ${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 367_libraries: 368 @echo 369 @echo "--------------------------------------------------------------" 370 @echo ">>> stage 4.2: building libraries" 371 @echo "--------------------------------------------------------------" 372 ${_+_}cd ${.CURDIR}; \ 373 ${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \ 374 -DWITHOUT_MAN -DWITHOUT_NLS -DNO_PROFILE libraries 375_depend: 376 @echo 377 @echo "--------------------------------------------------------------" 378 @echo ">>> stage 4.3: make dependencies" 379 @echo "--------------------------------------------------------------" 380 ${_+_}cd ${.CURDIR}; ${WMAKE} par-depend 381everything: 382 @echo 383 @echo "--------------------------------------------------------------" 384 @echo ">>> stage 4.4: building everything" 385 @echo "--------------------------------------------------------------" 386 ${_+_}cd ${.CURDIR}; ${WMAKE} par-all 387.if ${TARGET_ARCH} == "amd64" 388build32: 389 @echo 390 @echo "--------------------------------------------------------------" 391 @echo ">>> stage 5.1: building 32 bit shim libraries" 392 @echo "--------------------------------------------------------------" 393.for _dir in \ 394 lib lib32 usr/bin usr/include usr/lib32 usr/libdata/ldscripts \ 395 usr/libexec usr/sbin usr/share/misc \ 396 usr/share/snmp/defs usr/share/snmp/mibs 397 mkdir -p ${LIB32TMP}/${_dir} 398.endfor 399 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 400 -p ${LIB32TMP}/usr/include >/dev/null 401 mkdir -p ${WORLDTMP} 402 ln -sf ${.CURDIR}/sys ${WORLDTMP} 403.if ${MK_KERBEROS} != "no" 404.for _t in obj depend all 405 cd ${.CURDIR}/kerberos5/tools; \ 406 MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= ${_t} 407.endfor 408.endif 409.for _t in obj includes 410 cd ${.CURDIR}/include; \ 411 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 412 cd ${.CURDIR}/lib; \ 413 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 414 cd ${.CURDIR}/gnu/lib; \ 415 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 416.if ${MK_CRYPT} != "no" 417 cd ${.CURDIR}/secure/lib; \ 418 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 419.endif 420.if ${MK_KERBEROS} != "no" 421 cd ${.CURDIR}/kerberos5/lib; \ 422 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 423.endif 424.endfor 425.for _dir in usr.sbin/pcvt/keycap usr.bin/lex/lib 426 cd ${.CURDIR}/${_dir}; \ 427 ${LIB32MAKE} DESTDIR=${LIB32TMP} obj 428.endfor 429.for _dir in lib/libncurses lib/libmagic 430 cd ${.CURDIR}/${_dir}; \ 431 MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} DESTDIR= build-tools 432.endfor 433 cd ${.CURDIR}; \ 434 ${LIB32MAKE} -f Makefile.inc1 DESTDIR=${LIB32TMP} libraries 435.for _t in obj depend all 436 cd ${.CURDIR}/libexec/rtld-elf; \ 437 PROG=ld-elf32.so.1 ${LIB32MAKE} DESTDIR=${LIB32TMP} ${_t} 438.endfor 439 440distribute32 install32: 441.if make(distribute32) 442 mkdir -p ${DISTDIR}/${DISTRIBUTION}/usr/lib32 # XXX add to mtree 443.else 444 mkdir -p ${DESTDIR}/usr/lib32 # XXX add to mtree 445.endif 446 cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} 447 cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} 448.if ${MK_CRYPT} != "no" 449 cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//} 450.endif 451 cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//} 452.endif 453 454 455WMAKE_TGTS= 456.if !defined(SUBDIR_OVERRIDE) 457WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 458.endif 459WMAKE_TGTS+= _cleanobj _obj _build-tools 460.if !defined(SUBDIR_OVERRIDE) 461WMAKE_TGTS+= _cross-tools 462.endif 463WMAKE_TGTS+= _includes _libraries _depend everything 464.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32) 465WMAKE_TGTS+= build32 466.endif 467 468buildworld: ${WMAKE_TGTS} 469.ORDER: ${WMAKE_TGTS} 470 471buildenv: 472 @echo Entering world for ${TARGET_ARCH}:${TARGET} 473 @cd ${.CURDIR} && env ${WMAKEENV} sh || true 474 475TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32} 476toolchain: ${TOOLCHAIN_TGTS} 477kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries} 478 479# 480# installcheck 481# 482# Checks to be sure system is ready for installworld/installkernel. 483# 484installcheck: 485 486# 487# Require DESTDIR to be set if installing for a different architecture. 488# 489.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE} 490.if !make(distributeworld) 491installcheck: installcheck_DESTDIR 492installcheck_DESTDIR: 493.if !defined(DESTDIR) || empty(DESTDIR) 494 @echo "ERROR: Please set DESTDIR!"; \ 495 false 496.endif 497.endif 498.endif 499 500# 501# Check for missing UIDs/GIDs. 502# 503CHECK_UIDS= 504CHECK_GIDS= audit 505.if ${MK_SENDMAIL} != "no" 506CHECK_UIDS+= smmsp 507CHECK_GIDS+= smmsp 508.endif 509.if ${MK_PF} != "no" 510CHECK_UIDS+= proxy 511CHECK_GIDS+= proxy authpf 512.endif 513installcheck: installcheck_UGID 514installcheck_UGID: 515.for uid in ${CHECK_UIDS} 516 @if ! `id -u ${uid} >/dev/null 2>&1`; then \ 517 echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \ 518 false; \ 519 fi 520.endfor 521.for gid in ${CHECK_GIDS} 522 @if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \ 523 echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \ 524 false; \ 525 fi 526.endfor 527 528# 529# distributeworld 530# 531# Distributes everything compiled by a `buildworld'. 532# 533# installworld 534# 535# Installs everything compiled by a 'buildworld'. 536# 537distributeworld installworld: installcheck 538 mkdir -p ${INSTALLTMP} 539 for prog in [ awk cap_mkdb cat chflags chmod chown \ 540 date echo egrep find grep install-info \ 541 ln lockf make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 542 test true uname wc zic; do \ 543 cp `which $$prog` ${INSTALLTMP}; \ 544 done 545 ${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 546 rm -rf ${INSTALLTMP} 547 548# 549# reinstall 550# 551# If you have a build server, you can NFS mount the source and obj directories 552# and do a 'make reinstall' on the *client* to install new binaries from the 553# most recent server build. 554# 555reinstall: 556 @echo "--------------------------------------------------------------" 557 @echo ">>> Making hierarchy" 558 @echo "--------------------------------------------------------------" 559 ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 560 @echo 561 @echo "--------------------------------------------------------------" 562 @echo ">>> Installing everything" 563 @echo "--------------------------------------------------------------" 564 ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 565.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32) 566 ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32 567.endif 568 569redistribute: 570 @echo "--------------------------------------------------------------" 571 @echo ">>> Distributing everything" 572 @echo "--------------------------------------------------------------" 573 ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 574.if ${TARGET_ARCH} == "amd64" && !defined(NO_LIB32) 575 ${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 DISTRIBUTION=lib32 576.endif 577 578distrib-dirs distribution: 579 cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET} 580 581# 582# buildkernel and installkernel 583# 584# Which kernels to build and/or install is specified by setting 585# KERNCONF. If not defined a GENERIC kernel is built/installed. 586# Only the existing (depending TARGET) config files are used 587# for building kernels and only the first of these is designated 588# as the one being installed. 589# 590# Note that we have to use TARGET instead of TARGET_ARCH when 591# we're in kernel-land. Since only TARGET_ARCH is (expected) to 592# be set to cross-build, we have to make sure TARGET is set 593# properly. 594 595.if !defined(KERNCONF) && defined(KERNEL) 596KERNCONF= ${KERNEL} 597KERNWARN= 598.else 599KERNCONF?= GENERIC 600.endif 601INSTKERNNAME?= kernel 602 603KERNSRCDIR?= ${.CURDIR}/sys 604KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 605KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 606KERNCONFDIR?= ${KRNLCONFDIR} 607 608BUILDKERNELS= 609INSTALLKERNEL= 610.for _kernel in ${KERNCONF} 611.if exists(${KERNCONFDIR}/${_kernel}) 612BUILDKERNELS+= ${_kernel} 613.if empty(INSTALLKERNEL) 614INSTALLKERNEL= ${_kernel} 615.endif 616.endif 617.endfor 618 619# 620# buildkernel 621# 622# Builds all kernels defined by BUILDKERNELS. 623# 624buildkernel: 625.if empty(BUILDKERNELS) 626 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \ 627 false 628.endif 629.if defined(KERNWARN) 630 @echo "--------------------------------------------------------------" 631 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 632 @echo "--------------------------------------------------------------" 633 @sleep 3 634.endif 635 @echo 636.for _kernel in ${BUILDKERNELS} 637 @echo "--------------------------------------------------------------" 638 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 639 @echo "--------------------------------------------------------------" 640 @echo "===> ${_kernel}" 641 mkdir -p ${KRNLOBJDIR} 642.if !defined(NO_KERNELCONFIG) 643 @echo 644 @echo "--------------------------------------------------------------" 645 @echo ">>> stage 1: configuring the kernel" 646 @echo "--------------------------------------------------------------" 647 cd ${KRNLCONFDIR}; \ 648 PATH=${TMPPATH} \ 649 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 650 ${KERNCONFDIR}/${_kernel} 651.endif 652.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN) 653 @echo 654 @echo "--------------------------------------------------------------" 655 @echo ">>> stage 2.1: cleaning up the object tree" 656 @echo "--------------------------------------------------------------" 657 cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR} 658.endif 659 @echo 660 @echo "--------------------------------------------------------------" 661 @echo ">>> stage 2.2: rebuilding the object tree" 662 @echo "--------------------------------------------------------------" 663 cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj 664 @echo 665 @echo "--------------------------------------------------------------" 666 @echo ">>> stage 2.3: build tools" 667 @echo "--------------------------------------------------------------" 668 cd ${KRNLOBJDIR}/${_kernel}; \ 669 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 670 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 671# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 672.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 673.for target in obj depend all 674 cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \ 675 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 676 ${MAKE} -DNO_CPU_CFLAGS ${target} 677.endfor 678.endif 679.if !defined(NO_KERNELDEPEND) 680 @echo 681 @echo "--------------------------------------------------------------" 682 @echo ">>> stage 3.1: making dependencies" 683 @echo "--------------------------------------------------------------" 684 cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ 685.endif 686 @echo 687 @echo "--------------------------------------------------------------" 688 @echo ">>> stage 3.2: building everything" 689 @echo "--------------------------------------------------------------" 690 cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ 691 @echo "--------------------------------------------------------------" 692 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 693 @echo "--------------------------------------------------------------" 694.endfor 695 696# 697# installkernel, etc. 698# 699# Install the kernel defined by INSTALLKERNEL 700# 701installkernel installkernel.debug \ 702reinstallkernel reinstallkernel.debug: installcheck 703.if empty(INSTALLKERNEL) 704 @echo "ERROR: No kernel \"${KERNCONF}\" to install."; \ 705 false 706.endif 707 @echo "--------------------------------------------------------------" 708 @echo ">>> Installing kernel" 709 @echo "--------------------------------------------------------------" 710 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 711 ${CROSSENV} PATH=${TMPPATH} \ 712 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 713 714# 715# update 716# 717# Update the source tree, by running cvsup and/or running cvs to update to the 718# latest copy. 719# 720update: 721.if defined(SUP_UPDATE) 722 @echo "--------------------------------------------------------------" 723 @echo ">>> Running ${SUP}" 724 @echo "--------------------------------------------------------------" 725.if defined(SUPFILE) 726 @${SUP} ${SUPFLAGS} ${SUPFILE} 727.endif 728.if defined(SUPFILE1) 729 @${SUP} ${SUPFLAGS} ${SUPFILE1} 730.endif 731.if defined(SUPFILE2) 732 @${SUP} ${SUPFLAGS} ${SUPFILE2} 733.endif 734.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 735 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 736.endif 737.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 738 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 739.endif 740.endif 741.if defined(CVS_UPDATE) 742 @echo "--------------------------------------------------------------" 743 @echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT} 744 @echo "--------------------------------------------------------------" 745 cd ${.CURDIR}; ${CVS} -R -q update ${CVSFLAGS} 746.endif 747 748# 749# ------------------------------------------------------------------------ 750# 751# From here onwards are utility targets used by the 'make world' and 752# related targets. If your 'world' breaks, you may like to try to fix 753# the problem and manually run the following targets to attempt to 754# complete the build. Beware, this is *not* guaranteed to work, you 755# need to have a pretty good grip on the current state of the system 756# to attempt to manually finish it. If in doubt, 'make world' again. 757# 758 759# 760# legacy: Build compatibility shims for the next three targets 761# 762legacy: 763.if ${BOOTSTRAPPING} < 503000 764 @echo "ERROR: Source upgrades from versions prior to 5.3 not supported."; \ 765 false 766.endif 767.for _tool in tools/build 768 ${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \ 769 cd ${.CURDIR}/${_tool}; \ 770 ${MAKE} DIRPRFX=${_tool}/ obj; \ 771 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 772 ${MAKE} DIRPRFX=${_tool}/ depend; \ 773 ${MAKE} DIRPRFX=${_tool}/ all; \ 774 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 775.endfor 776 777# 778# bootstrap-tools: Build tools needed for compatibility 779# 780.if ${MK_GAMES} != "no" 781_strfile= games/fortune/strfile 782.endif 783 784.if ${MK_CXX} != "no" 785_gperf= gnu/usr.bin/gperf 786.if ${BOOTSTRAPPING} < 700004 787_groff= gnu/usr.bin/groff 788.else 789_groff= gnu/usr.bin/groff/tmac 790.endif 791.endif 792 793.if ${BOOTSTRAPPING} < 600029 794_texinfo= gnu/usr.bin/texinfo 795.endif 796 797.if ${BOOTSTRAPPING} < 600015 798_cap_mkdb= usr.bin/cap_mkdb 799.endif 800 801.if ${BOOTSTRAPPING} < 600018 802_colldef= usr.bin/colldef 803.endif 804 805.if ${BOOTSTRAPPING} < 600017 806_gencat= usr.bin/gencat 807.endif 808 809.if ${BOOTSTRAPPING} < 600016 810_mklocale= usr.bin/mklocale 811.endif 812 813.if ${MK_RESCUE} != "no" && \ 814 ${BOOTSTRAPPING} < 600008 815_crunchgen= usr.sbin/crunch/crunchgen 816.endif 817 818.if ${BOOTSTRAPPING} < 600020 819_pwd_mkdb= usr.sbin/pwd_mkdb 820.endif 821 822.if ${BOOTSTRAPPING} < 700014 823_gensnmptree= usr.sbin/bsnmpd/gensnmptree 824.endif 825 826bootstrap-tools: 827.for _tool in \ 828 ${_strfile} \ 829 ${_gperf} \ 830 ${_groff} \ 831 ${_texinfo} \ 832 ${_cap_mkdb} \ 833 ${_colldef} \ 834 ${_gencat} \ 835 usr.bin/lorder \ 836 usr.bin/makewhatis \ 837 ${_mklocale} \ 838 usr.bin/rpcgen \ 839 usr.bin/xinstall \ 840 usr.sbin/config \ 841 ${_gensnmptree} \ 842 ${_crunchgen} \ 843 ${_pwd_mkdb} 844 ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \ 845 cd ${.CURDIR}/${_tool}; \ 846 ${MAKE} DIRPRFX=${_tool}/ obj; \ 847 ${MAKE} DIRPRFX=${_tool}/ depend; \ 848 ${MAKE} DIRPRFX=${_tool}/ all; \ 849 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 850.endfor 851 852# 853# build-tools: Build special purpose build tools 854# 855.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 856_aicasm= sys/modules/aic7xxx/aicasm 857.endif 858 859.if !defined(NO_SHARE) 860_share= share/syscons/scrnmaps 861.endif 862 863.if ${MK_KERBEROS} != "no" 864_kerberos5_tools= kerberos5/tools 865.endif 866 867.if ${MK_RESCUE} != "no" 868_rescue= rescue/rescue 869.endif 870 871build-tools: 872.for _tool in \ 873 bin/csh \ 874 bin/sh \ 875 ${_rescue} \ 876 lib/libncurses \ 877 ${_share} \ 878 ${_aicasm} \ 879 usr.bin/awk \ 880 lib/libmagic \ 881 usr.sbin/sysinstall 882 ${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \ 883 cd ${.CURDIR}/${_tool}; \ 884 ${MAKE} DIRPRFX=${_tool}/ obj; \ 885 ${MAKE} DIRPRFX=${_tool}/ build-tools 886.endfor 887.for _tool in \ 888 gnu/usr.bin/cc/cc_tools \ 889 ${_kerberos5_tools} 890 ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \ 891 cd ${.CURDIR}/${_tool}; \ 892 ${MAKE} DIRPRFX=${_tool}/ obj; \ 893 ${MAKE} DIRPRFX=${_tool}/ depend; \ 894 ${MAKE} DIRPRFX=${_tool}/ all 895.endfor 896 897# 898# cross-tools: Build cross-building tools 899# 900.if ${TARGET_ARCH} != ${MACHINE_ARCH} 901.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386" 902_btxld= usr.sbin/btxld 903.endif 904.if ${MK_RESCUE} != "no" || defined(RELEASEDIR) 905_crunchide= usr.sbin/crunch/crunchide 906.endif 907.if ${TARGET_ARCH} == "alpha" 908_elf2exe= usr.sbin/elf2exe 909.endif 910.if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR) 911_kgzip= usr.sbin/kgzip 912.endif 913.endif 914 915cross-tools: 916.for _tool in \ 917 gnu/usr.bin/binutils \ 918 gnu/usr.bin/cc \ 919 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 920 ${_btxld} \ 921 ${_crunchide} \ 922 ${_elf2exe} \ 923 ${_kgzip} 924 ${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \ 925 cd ${.CURDIR}/${_tool}; \ 926 ${MAKE} DIRPRFX=${_tool}/ obj; \ 927 ${MAKE} DIRPRFX=${_tool}/ depend; \ 928 ${MAKE} DIRPRFX=${_tool}/ all; \ 929 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 930.endfor 931 932# 933# hierarchy - ensure that all the needed directories are present 934# 935hierarchy: 936 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 937 938# 939# libraries - build all libraries, and install them under ${DESTDIR}. 940# 941# The list of libraries with dependents (${_prebuild_libs}) and their 942# interdependencies (__L) are built automatically by the 943# ${.CURDIR}/tools/make_libdeps.sh script. 944# 945libraries: 946 cd ${.CURDIR}; \ 947 ${MAKE} -f Makefile.inc1 _startup_libs; \ 948 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 949 ${MAKE} -f Makefile.inc1 _generic_libs; 950 951# These dependencies are not automatically generated: 952# 953# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 954# shared libraries for ELF. 955# 956_startup_libs= gnu/lib/csu gnu/lib/libgcc 957.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 958_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 959.else 960_startup_libs+= lib/csu/${MACHINE_ARCH} 961.endif 962 963_prebuild_libs= 964 965_generic_libs= gnu/lib 966 967.if ${MK_KERBEROS} != "no" 968_prebuild_libs+= kerberos5/lib/libasn1 969_prebuild_libs+= kerberos5/lib/libkrb5 970_prebuild_libs+= kerberos5/lib/libroken 971_generic_libs+= kerberos5/lib 972.endif 973 974_prebuild_libs+= lib/libbz2 lib/libcom_err lib/libcrypt lib/libexpat \ 975 lib/libipx lib/libkiconv lib/libkvm lib/libmd \ 976 lib/libncurses lib/libnetgraph lib/libopie lib/libpam \ 977 lib/libradius \ 978 lib/libsbuf lib/libtacplus lib/libutil \ 979 lib/libz lib/msun lib/libgssapi 980 981lib/libopie__L lib/libtacplus__L: lib/libmd__L 982 983_generic_libs+= lib 984 985.if ${MK_CRYPT} != "no" 986.if ${MK_OPENSSL} != "no" 987_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 988lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L 989.if ${MK_OPENSSH} != "no" 990_prebuild_libs+= secure/lib/libssh 991secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L 992.if ${MK_KERBEROS} != "no" 993secure/lib/libssh__L: lib/libgssapi__L 994.endif 995.endif 996.endif 997_generic_libs+= secure/lib 998.endif 999 1000.if ${MK_OPENSSL} == "no" 1001lib/libradius__L: lib/libmd__L 1002.endif 1003 1004.if ${MK_NIS} != "no" 1005_prebuild_libs+= lib/libypclnt 1006.endif 1007 1008_generic_libs+= usr.bin/lex/lib 1009 1010.if ${MACHINE} == "i386" 1011_generic_libs+= usr.sbin/pcvt/keycap 1012.endif 1013 1014.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 1015${_lib}__L: .PHONY 1016.if exists(${.CURDIR}/${_lib}) 1017 ${_+_}@${ECHODIR} "===> ${_lib} (depend,all,install)"; \ 1018 cd ${.CURDIR}/${_lib}; \ 1019 ${MAKE} DIRPRFX=${_lib}/ depend; \ 1020 ${MAKE} DIRPRFX=${_lib}/ all; \ 1021 ${MAKE} DIRPRFX=${_lib}/ install 1022.endif 1023.endfor 1024 1025# libpam is special: we need to build static PAM modules before 1026# static PAM library, and dynamic PAM library before dynamic PAM 1027# modules. 1028lib/libpam__L: .PHONY 1029 ${_+_}@${ECHODIR} "===> lib/libpam (depend,all,install)"; \ 1030 cd ${.CURDIR}/lib/libpam; \ 1031 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 1032 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 1033 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 1034 1035_startup_libs: ${_startup_libs:S/$/__L/} 1036_prebuild_libs: ${_prebuild_libs:S/$/__L/} 1037_generic_libs: ${_generic_libs:S/$/__L/} 1038 1039.for __target in all clean cleandepend cleandir depend includes obj 1040.for entry in ${SUBDIR} 1041${entry}.${__target}__D: .PHONY 1042 ${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 1043 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \ 1044 edir=${entry}.${MACHINE_ARCH}; \ 1045 cd ${.CURDIR}/$${edir}; \ 1046 else \ 1047 ${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \ 1048 edir=${entry}; \ 1049 cd ${.CURDIR}/$${edir}; \ 1050 fi; \ 1051 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 1052.endfor 1053par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 1054.endfor 1055 1056.include <bsd.subdir.mk> 1057 1058.if make(delete-old) || make(delete-old-libs) || make(check-old) 1059 1060# 1061# check for / delete old files section 1062# 1063 1064.include "ObsoleteFiles.inc" 1065 1066OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \ 1067else you can not start such an application. Consult UPDATING for more \ 1068information regarding how to cope with the removal/revision bump of a \ 1069specific library." 1070 1071.if !defined(BATCH_DELETE_OLD_FILES) 1072RM_I=-i 1073.else 1074RM_I=-v 1075.endif 1076 1077delete-old-files: 1078 @echo ">>> Removing old files (only deletes safe to delete libs)" 1079.for file in ${OLD_FILES} 1080# Ask for every old file if the user really wants to remove it. 1081# It's annoying, but better safe than sorry. 1082 @if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then \ 1083 rm ${RM_I} "${DESTDIR}/${file}" || true; \ 1084 if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then\ 1085 echo "Removing schg flag on ${DESTDIR}/${file}"; \ 1086 chflags noschg "${DESTDIR}/${file}"; \ 1087 rm ${RM_I} "${DESTDIR}/${file}"; \ 1088 fi; \ 1089 fi 1090.endfor 1091# Remove catpages without corresponding manpages. 1092 @3<&0; \ 1093 find ${DESTDIR}/usr/share/man/cat* ! -type d | \ 1094 sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \ 1095 while read catpage; do \ 1096 read manpage; \ 1097 if [ ! -e "$${manpage}" ]; then \ 1098 rm ${RM_I} $${catpage} <&3 ; \ 1099 fi; \ 1100 done 1101 @echo ">>> Old files removed" 1102 1103check-old-files: 1104 @echo ">>> Checking for old files" 1105.for file in ${OLD_FILES} 1106 @if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then \ 1107 echo "${DESTDIR}/${file}"; \ 1108 fi 1109.endfor 1110# Check for catpages without corresponding manpages. 1111 @find ${DESTDIR}/usr/share/man/cat* ! -type d | \ 1112 sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \ 1113 while read catpage; do \ 1114 read manpage; \ 1115 if [ ! -e "$${manpage}" ]; then \ 1116 echo $${catpage} ; \ 1117 fi; \ 1118 done 1119 1120delete-old-libs: 1121 @echo ">>> Removing old libraries" 1122 @echo "${OLD_LIBS_MESSAGE}" | fmt 1123.for file in ${OLD_LIBS} 1124 @if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then \ 1125 rm ${RM_I} "${DESTDIR}/${file}" || true; \ 1126 if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then\ 1127 echo "Removing schg flag on ${DESTDIR}/${file}"; \ 1128 chflags noschg "${DESTDIR}/${file}"; \ 1129 rm ${RM_I} "${DESTDIR}/${file}"; \ 1130 fi; \ 1131 fi 1132.endfor 1133 @echo ">>> Old libraries removed" 1134 1135check-old-libs: 1136 @echo ">>> Checking for old libraries" 1137.for file in ${OLD_LIBS} 1138 @if [ -f "${DESTDIR}/${file}" -o -L "${DESTDIR}/${file}" ]; then \ 1139 echo "${DESTDIR}/${file}"; \ 1140 fi 1141.endfor 1142 1143delete-old-dirs: 1144 @echo ">>> Removing old directories" 1145.for dir in ${OLD_DIRS} 1146# Don't fail if an old directory isn't empty. 1147 @if [ -d "${DESTDIR}/${dir}" ]; then \ 1148 rmdir -v "${DESTDIR}/${dir}" || true; \ 1149 else \ 1150 if [ -L "${DESTDIR}/${dir}" ]; then \ 1151 echo "${DESTDIR}/${dir} is a link, please remove everything manually."; \ 1152 fi; \ 1153 fi 1154.endfor 1155 @echo ">>> Old directories removed" 1156 1157check-old-dirs: 1158 @echo ">>> Checking for old directories" 1159.for dir in ${OLD_DIRS} 1160 @if [ -d "${DESTDIR}/${dir}" ]; then \ 1161 echo "${DESTDIR}/${dir}"; \ 1162 else \ 1163 if [ -L "${DESTDIR}/${dir}" ]; then \ 1164 echo "${DESTDIR}/${dir} is a link, please remove everything manually."; \ 1165 fi; \ 1166 fi 1167.endfor 1168 1169delete-old: delete-old-files delete-old-dirs 1170 @echo "To remove old libraries run '${MAKE} delete-old-libs'." 1171 1172check-old: check-old-files check-old-libs check-old-dirs 1173 @echo "To remove old files and directories run '${MAKE} delete-old'." 1174 @echo "To remove old libraries run '${MAKE} delete-old-libs'." 1175 1176.endif 1177 1178