1# 2# $FreeBSD$ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNOGAMES do not go into games subdir 12# -DNOSHARE do not go into share subdir 13# -DNOINFO do not make or install info files 14# -DNOLIBC_R do not build libc_r. 15# -DNO_FORTRAN do not build g77 and related libraries. 16# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 17# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 18# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 19# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 20# -DNO_DOCUPDATE do not update doc in ${MAKE} update 21# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 22# TARGET_ARCH="arch" to crossbuild world to a different arch 23 24# 25# The intended user-driven targets are: 26# buildworld - rebuild *everything*, including glue to help do upgrades 27# installworld- install everything built by "buildworld" 28# update - convenient way to update your source tree (eg: sup/cvs) 29# most - build user commands, no libraries or include files 30# installmost - install user commands, no libraries or include files 31# 32# Standard targets (not defined here) are documented in the makefiles in 33# /usr/share/mk. These include: 34# obj depend all install clean cleandepend cleanobj 35 36# Put initial settings here. 37SUBDIR= 38 39# We must do share/info early so that installation of info `dir' 40# entries works correctly. Do it first since it is less likely to 41# grow dependencies on include and lib than vice versa. 42.if exists(${.CURDIR}/share/info) 43SUBDIR+= share/info 44.endif 45 46.if exists(${.CURDIR}/include) 47SUBDIR+= include 48.endif 49.if exists(${.CURDIR}/lib) 50SUBDIR+= lib 51.endif 52 53.if exists(${.CURDIR}/bin) 54SUBDIR+= bin 55.endif 56.if exists(${.CURDIR}/games) && !defined(NOGAMES) 57SUBDIR+= games 58.endif 59.if exists(${.CURDIR}/gnu) 60SUBDIR+= gnu 61.endif 62.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 63 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 64SUBDIR+= kerberos5 65.endif 66.if exists(${.CURDIR}/libexec) 67SUBDIR+= libexec 68.endif 69.if exists(${.CURDIR}/rescue) && defined(RESCUE) 70SUBDIR+= rescue 71.endif 72.if exists(${.CURDIR}/sbin) 73SUBDIR+= sbin 74.endif 75.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 76SUBDIR+= secure 77.endif 78.if exists(${.CURDIR}/share) && !defined(NOSHARE) 79SUBDIR+= share 80.endif 81.if exists(${.CURDIR}/sys) 82SUBDIR+= sys 83.endif 84.if exists(${.CURDIR}/usr.bin) 85SUBDIR+= usr.bin 86.endif 87.if exists(${.CURDIR}/usr.sbin) 88SUBDIR+= usr.sbin 89.endif 90 91# etc must be last for "distribute" to work 92.if exists(${.CURDIR}/etc) 93SUBDIR+= etc 94.endif 95 96# These are last, since it is nice to at least get the base system 97# rebuilt before you do them. 98.if defined(LOCAL_DIRS) 99.for _DIR in ${LOCAL_DIRS} 100.if exists(${.CURDIR}/${_DIR}) && exists(${.CURDIR}/${_DIR}/Makefile) 101SUBDIR+= ${_DIR} 102.endif 103.endfor 104.endif 105 106.if defined(SUBDIR_OVERRIDE) 107SUBDIR= ${SUBDIR_OVERRIDE} 108.endif 109 110.if defined(NOCLEANDIR) 111CLEANDIR= clean cleandepend 112.else 113CLEANDIR= cleandir 114.endif 115 116CVS?= cvs 117SUP?= /usr/local/bin/cvsup 118SUPFLAGS?= -g -L 2 -P - 119.if defined(SUPHOST) 120SUPFLAGS+= -h ${SUPHOST} 121.endif 122 123MAKEOBJDIRPREFIX?= /usr/obj 124.if !defined(OSRELDATE) 125OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 126 /usr/include/osreldate.h 127.endif 128TARGET_ARCH?= ${MACHINE_ARCH} 129.if ${TARGET_ARCH} == ${MACHINE_ARCH} 130TARGET?= ${MACHINE} 131TARGET_CPUTYPE?=${CPUTYPE} 132.else 133TARGET?= ${TARGET_ARCH} 134TARGET_CPUTYPE?= 135.endif 136.if !empty(TARGET_CPUTYPE) 137_TARGET_CPUTYPE=${TARGET_CPUTYPE} 138.else 139_TARGET_CPUTYPE=dummy 140.endif 141_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 142 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 143.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 144.error CPUTYPE global should be set with ?=. 145.endif 146.if make(buildworld) 147BUILD_ARCH!= sysctl -n hw.machine_arch 148.if ${MACHINE_ARCH} != ${BUILD_ARCH} 149.error To cross-build, set TARGET_ARCH. 150.endif 151.endif 152.if ${MACHINE} == ${TARGET} 153OBJTREE= ${MAKEOBJDIRPREFIX} 154.else 155OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 156.endif 157WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 158# /usr/games added for fortune which depend on strfile 159BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 160XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 161STRICTTMPPATH= ${BPATH}:${XPATH} 162TMPPATH= ${STRICTTMPPATH}:${PATH} 163 164INSTALLTMP!= /usr/bin/mktemp -d -u -t install 165 166# 167# Building a world goes through the following stages 168# 169# 1. legacy stage [BMAKE] 170# This stage is responsible for creating compatibility 171# shims that are needed by the bootstrap-tools, 172# build-tools and cross-tools stages. 173# 1. bootstrap-tools stage [BMAKE] 174# This stage is responsible for creating programs that 175# are needed for backward compatibility reasons. They 176# are not built as cross-tools. 177# 2. build-tools stage [TMAKE] 178# This stage is responsible for creating the object 179# tree and building any tools that are needed during 180# the build process. 181# 3. cross-tools stage [XMAKE] 182# This stage is responsible for creating any tools that 183# are needed for cross-builds. A cross-compiler is one 184# of them. 185# 4. world stage [WMAKE] 186# This stage actually builds the world. 187# 5. install stage (optional) [IMAKE] 188# This stage installs a previously built world. 189# 190 191BOOTSTRAPPING?= 0 192 193# Common environment for world related stages 194CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 195 MACHINE_ARCH=${TARGET_ARCH} \ 196 MACHINE=${TARGET} \ 197 CPUTYPE=${TARGET_CPUTYPE} \ 198 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 199 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 200 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 201 202# bootstrap-tools stage 203BMAKEENV= DESTDIR= \ 204 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 205 PATH=${BPATH}:${PATH} \ 206 WORLDTMP=${WORLDTMP} \ 207 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 208BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 209 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 210 BOOTSTRAPPING=${OSRELDATE} \ 211 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 212 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 213 214# build-tools stage 215TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 216 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 217 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 218 219# cross-tools stage 220XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 221 222# world stage 223WMAKEENV= ${CROSSENV} \ 224 DESTDIR=${WORLDTMP} \ 225 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 226 PATH=${TMPPATH} 227WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 228 229# install stage 230IMAKEENV= ${CROSSENV} \ 231 PATH=${STRICTTMPPATH}:${INSTALLTMP} 232IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 233 234# kernel stage 235KMAKEENV= ${WMAKEENV} 236 237# 238# buildworld 239# 240# Attempt to rebuild the entire system, with reasonable chance of 241# success, regardless of how old your existing system is. 242# 243_worldtmp: 244.if ${.CURDIR:C/[^,]//g} != "" 245# The m4 build of sendmail files doesn't like it if ',' is used 246# anywhere in the path of it's files. 247 @echo 248 @echo "*** Error: path to source tree contains a comma ','" 249 @echo 250 @false 251.endif 252 @echo 253 @echo "--------------------------------------------------------------" 254 @echo ">>> Rebuilding the temporary build tree" 255 @echo "--------------------------------------------------------------" 256.if !defined(NOCLEAN) 257 rm -rf ${WORLDTMP} 258.else 259 rm -rf ${WORLDTMP}/legacy/usr/include 260 # XXX - These two can depend on any header file. 261 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 262 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 263.endif 264.for _dir in \ 265 usr/bin usr/games usr/include/sys usr/lib \ 266 usr/libexec usr/sbin usr/share/dict \ 267 usr/share/groff_font/devX100 \ 268 usr/share/groff_font/devX100-12 \ 269 usr/share/groff_font/devX75 \ 270 usr/share/groff_font/devX75-12 \ 271 usr/share/groff_font/devascii \ 272 usr/share/groff_font/devcp1047 \ 273 usr/share/groff_font/devdvi \ 274 usr/share/groff_font/devhtml \ 275 usr/share/groff_font/devkoi8-r \ 276 usr/share/groff_font/devlatin1 \ 277 usr/share/groff_font/devlbp \ 278 usr/share/groff_font/devlj4 \ 279 usr/share/groff_font/devps \ 280 usr/share/groff_font/devutf8 \ 281 usr/share/tmac/mdoc usr/share/tmac/mm 282 mkdir -p ${WORLDTMP}/legacy/${_dir} 283.endfor 284.for _dir in \ 285 usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 286 usr/libexec usr/share/misc 287 mkdir -p ${WORLDTMP}/${_dir} 288.endfor 289 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 290 -p ${WORLDTMP}/usr/include 291 ln -sf ${.CURDIR}/sys ${WORLDTMP} 292_legacy: 293 @echo 294 @echo "--------------------------------------------------------------" 295 @echo ">>> stage 1: legacy release compatibility shims" 296 @echo "--------------------------------------------------------------" 297 cd ${.CURDIR}; ${BMAKE} legacy 298_bootstrap-tools: 299 @echo 300 @echo "--------------------------------------------------------------" 301 @echo ">>> stage 1: bootstrap tools" 302 @echo "--------------------------------------------------------------" 303 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 304_cleanobj: 305.if !defined(NOCLEAN) 306 @echo 307 @echo "--------------------------------------------------------------" 308 @echo ">>> stage 2: cleaning up the object tree" 309 @echo "--------------------------------------------------------------" 310 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 311.endif 312_obj: 313 @echo 314 @echo "--------------------------------------------------------------" 315 @echo ">>> stage 2: rebuilding the object tree" 316 @echo "--------------------------------------------------------------" 317 cd ${.CURDIR}; ${WMAKE} par-obj 318_build-tools: 319 @echo 320 @echo "--------------------------------------------------------------" 321 @echo ">>> stage 2: build tools" 322 @echo "--------------------------------------------------------------" 323 cd ${.CURDIR}; ${TMAKE} build-tools 324_cross-tools: 325 @echo 326 @echo "--------------------------------------------------------------" 327 @echo ">>> stage 3: cross tools" 328 @echo "--------------------------------------------------------------" 329 cd ${.CURDIR}; ${XMAKE} cross-tools 330_includes: 331 @echo 332 @echo "--------------------------------------------------------------" 333 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 334 @echo "--------------------------------------------------------------" 335 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 336_libraries: 337 @echo 338 @echo "--------------------------------------------------------------" 339 @echo ">>> stage 4: building libraries" 340 @echo "--------------------------------------------------------------" 341 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 342_depend: 343 @echo 344 @echo "--------------------------------------------------------------" 345 @echo ">>> stage 4: make dependencies" 346 @echo "--------------------------------------------------------------" 347 cd ${.CURDIR}; ${WMAKE} par-depend 348everything: 349 @echo 350 @echo "--------------------------------------------------------------" 351 @echo ">>> stage 4: building everything.." 352 @echo "--------------------------------------------------------------" 353 cd ${.CURDIR}; ${WMAKE} par-all 354 355 356WMAKE_TGTS= 357.if !defined(SUBDIR_OVERRIDE) 358WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 359.endif 360WMAKE_TGTS+= _cleanobj _obj _build-tools 361.if !defined(SUBDIR_OVERRIDE) 362WMAKE_TGTS+= _cross-tools 363.endif 364WMAKE_TGTS+= _includes _libraries _depend everything 365 366buildworld: ${WMAKE_TGTS} 367.ORDER: ${WMAKE_TGTS} 368 369# 370# installcheck 371# 372# Checks to be sure system is ready for installworld 373# 374installcheck: 375.if !defined(NO_SENDMAIL) 376 @if ! `id -u smmsp > /dev/null`; then \ 377 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 378 false; \ 379 fi 380 @if ! `id -g smmsp > /dev/null`; then \ 381 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 382 false; \ 383 fi 384.endif 385.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 386 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 387 @echo "Checking to see if your booted kernel is fresh enough.." 388 ${.OBJDIR}/bin/sh/sh -c \ 389 'echo "Testing installed kernel for new sigaction(2) syscall"' 390 @echo "Seems ok.." 391.endif 392 393# 394# distributeworld 395# 396# Distributes everything compiled by a `buildworld'. 397# 398# installworld 399# 400# Installs everything compiled by a 'buildworld'. 401# 402distributeworld installworld: installcheck 403 mkdir -p ${INSTALLTMP} 404 for prog in [ awk cap_mkdb cat chflags chmod chown \ 405 date echo egrep find grep \ 406 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 407 test true uname wc zic; do \ 408 cp `which $$prog` ${INSTALLTMP}; \ 409 done 410 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 411 rm -rf ${INSTALLTMP} 412 413# 414# reinstall 415# 416# If you have a build server, you can NFS mount the source and obj directories 417# and do a 'make reinstall' on the *client* to install new binaries from the 418# most recent server build. 419# 420reinstall: 421 @echo "--------------------------------------------------------------" 422 @echo ">>> Making hierarchy" 423 @echo "--------------------------------------------------------------" 424 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 425 @echo 426 @echo "--------------------------------------------------------------" 427 @echo ">>> Installing everything.." 428 @echo "--------------------------------------------------------------" 429 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 430.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 431 @echo 432 @echo "--------------------------------------------------------------" 433 @echo ">>> Rebuilding man page indices" 434 @echo "--------------------------------------------------------------" 435 cd ${.CURDIR}/share/man; ${MAKE} makedb 436.endif 437 438redistribute: 439 @echo "--------------------------------------------------------------" 440 @echo ">>> Distributing everything.." 441 @echo "--------------------------------------------------------------" 442 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 443 444# 445# buildkernel and installkernel 446# 447# Which kernels to build and/or install is specified by setting 448# KERNCONF. If not defined a GENERIC kernel is built/installed. 449# Only the existing (depending TARGET) config files are used 450# for building kernels and only the first of these is designated 451# as the one being installed. 452# 453# Note that we have to use TARGET instead of TARGET_ARCH when 454# we're in kernel-land. Since only TARGET_ARCH is (expected) to 455# be set to cross-build, we have to make sure TARGET is set 456# properly. 457 458.if !defined(KERNCONF) && defined(KERNEL) 459KERNCONF= ${KERNEL} 460KERNWARN= yes 461.else 462KERNCONF?= GENERIC 463.endif 464INSTKERNNAME?= kernel 465 466KERNSRCDIR?= ${.CURDIR}/sys 467KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 468KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 469KERNCONFDIR?= ${KRNLCONFDIR} 470 471BUILDKERNELS= 472INSTALLKERNEL= 473.for _kernel in ${KERNCONF} 474.if exists(${KERNCONFDIR}/${_kernel}) 475BUILDKERNELS+= ${_kernel} 476.if empty(INSTALLKERNEL) 477INSTALLKERNEL= ${_kernel} 478.endif 479.endif 480.endfor 481 482# 483# buildkernel 484# 485# Builds all kernels defined by BUILDKERNELS. 486# 487buildkernel: 488.if empty(BUILDKERNELS) 489 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 490 @false 491.endif 492.if defined(KERNWARN) 493 @echo "--------------------------------------------------------------" 494 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 495 @echo "--------------------------------------------------------------" 496 @sleep 3 497.endif 498 @echo 499.for _kernel in ${BUILDKERNELS} 500 @echo "--------------------------------------------------------------" 501 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 502 @echo "--------------------------------------------------------------" 503 @echo "===> ${_kernel}" 504 mkdir -p ${KRNLOBJDIR} 505.if !defined(NO_KERNELCONFIG) 506 cd ${KRNLCONFDIR}; \ 507 PATH=${TMPPATH} \ 508 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 509 ${KERNCONFDIR}/${_kernel} 510.endif 511.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 512 cd ${KRNLOBJDIR}/${_kernel}; \ 513 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 514.endif 515 cd ${KRNLOBJDIR}/${_kernel}; \ 516 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 517 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 518 cd ${KRNLOBJDIR}/${_kernel}; \ 519 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 520# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 521.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 522.for target in obj depend all 523 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 524 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 525 ${MAKE} -DNO_CPU_CFLAGS ${target} 526.endfor 527.endif 528.if !defined(NO_KERNELDEPEND) 529 cd ${KRNLOBJDIR}/${_kernel}; \ 530 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 531.endif 532 cd ${KRNLOBJDIR}/${_kernel}; \ 533 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 534 @echo "--------------------------------------------------------------" 535 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 536 @echo "--------------------------------------------------------------" 537.endfor 538 539# 540# installkernel 541# 542# Install the kernel defined by INSTALLKERNEL 543# 544installkernel reinstallkernel installkernel.debug reinstallkernel.debug: 545.if empty(INSTALLKERNEL) 546 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 547 @false 548.endif 549 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 550 ${CROSSENV} PATH=${TMPPATH} \ 551 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//} 552 553# 554# update 555# 556# Update the source tree, by running sup and/or running cvs to update to the 557# latest copy. 558# 559update: 560.if defined(SUP_UPDATE) 561 @echo "--------------------------------------------------------------" 562 @echo ">>> Running ${SUP}" 563 @echo "--------------------------------------------------------------" 564.if defined(SUPFILE) 565 @${SUP} ${SUPFLAGS} ${SUPFILE} 566.endif 567.if defined(SUPFILE1) 568 @${SUP} ${SUPFLAGS} ${SUPFILE1} 569.endif 570.if defined(SUPFILE2) 571 @${SUP} ${SUPFLAGS} ${SUPFILE2} 572.endif 573.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 574 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 575.endif 576.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 577 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 578.endif 579.endif 580.if defined(CVS_UPDATE) 581 @echo "--------------------------------------------------------------" 582 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 583 @echo "--------------------------------------------------------------" 584 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 585.endif 586 587# 588# most 589# 590# Build most of the user binaries on the existing system libs and includes. 591# 592most: 593 @echo "--------------------------------------------------------------" 594 @echo ">>> Building programs only" 595 @echo "--------------------------------------------------------------" 596.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 597 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 598.endfor 599 600# 601# installmost 602# 603# Install the binaries built by the 'most' target. This does not include 604# libraries or include files. 605# 606installmost: 607 @echo "--------------------------------------------------------------" 608 @echo ">>> Installing programs only" 609 @echo "--------------------------------------------------------------" 610.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 611 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 612.endfor 613 614# 615# ------------------------------------------------------------------------ 616# 617# From here onwards are utility targets used by the 'make world' and 618# related targets. If your 'world' breaks, you may like to try to fix 619# the problem and manually run the following targets to attempt to 620# complete the build. Beware, this is *not* guaranteed to work, you 621# need to have a pretty good grip on the current state of the system 622# to attempt to manually finish it. If in doubt, 'make world' again. 623# 624 625# 626# legacy: Build compatibility shims for the next three targets 627# 628legacy: 629.for _tool in tools/build 630 @${ECHODIR} "===> ${_tool}"; \ 631 cd ${.CURDIR}/${_tool}; \ 632 ${MAKE} DIRPRFX=${_tool}/ obj; \ 633 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 634 ${MAKE} DIRPRFX=${_tool}/ depend; \ 635 ${MAKE} DIRPRFX=${_tool}/ all; \ 636 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 637.endfor 638 639# 640# bootstrap-tools: Build tools needed for compatibility 641# 642.if exists(${.CURDIR}/games) && !defined(NOGAMES) 643_strfile= games/fortune/strfile 644.endif 645 646.if !defined(NO_CXX) 647_gperf= gnu/usr.bin/gperf 648.if ${BOOTSTRAPPING} < 500113 649_groff= gnu/usr.bin/groff 650.else 651_groff= gnu/usr.bin/groff/tmac 652.endif 653.endif 654 655.if ${BOOTSTRAPPING} < 450005 || \ 656 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 657_uudecode= usr.bin/uudecode 658.endif 659 660.if ${BOOTSTRAPPING} < 430002 || \ 661 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 662_xargs= usr.bin/xargs 663.endif 664 665.if ${BOOTSTRAPPING} < 430002 || \ 666 ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 667_yacc= usr.bin/yacc 668.endif 669 670.if exists(${.CURDIR}/rescue) && defined(RESCUE) && \ 671 ${BOOTSTRAPPING} < 501100 672_crunchgen= usr.sbin/crunch/crunchgen 673.endif 674 675.if ${BOOTSTRAPPING} < 500019 676_kbdcontrol= usr.sbin/kbdcontrol 677.endif 678 679bootstrap-tools: 680.for _tool in \ 681 ${_strfile} \ 682 ${_gperf} \ 683 ${_groff} \ 684 gnu/usr.bin/texinfo \ 685 usr.bin/colldef \ 686 usr.bin/makewhatis \ 687 usr.bin/rpcgen \ 688 ${_uudecode} \ 689 ${_xargs} \ 690 usr.bin/xinstall \ 691 ${_yacc} \ 692 usr.sbin/config \ 693 ${_crunchgen} \ 694 ${_kbdcontrol} 695 @${ECHODIR} "===> ${_tool}"; \ 696 cd ${.CURDIR}/${_tool}; \ 697 ${MAKE} DIRPRFX=${_tool}/ obj; \ 698 ${MAKE} DIRPRFX=${_tool}/ depend; \ 699 ${MAKE} DIRPRFX=${_tool}/ all; \ 700 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 701.endfor 702 703# 704# build-tools: Build special purpose build tools 705# 706.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 707_aicasm= sys/modules/aic7xxx/aicasm 708.endif 709 710.if exists(${.CURDIR}/share) && !defined(NOSHARE) 711_share= share/syscons/scrnmaps 712.endif 713 714.if !defined(NO_FORTRAN) 715_fortran= gnu/usr.bin/cc/f771 716.endif 717 718.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 719 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 720_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 721 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 722.endif 723 724build-tools: 725.for _tool in \ 726 bin/csh \ 727 bin/sh \ 728 gnu/usr.bin/cc/cc_tools \ 729 ${_fortran} \ 730 ${_libkrb5} \ 731 lib/libncurses \ 732 ${_share} \ 733 ${_aicasm} \ 734 usr.bin/awk \ 735 usr.bin/file \ 736 usr.sbin/sysinstall 737 @${ECHODIR} "===> ${_tool}"; \ 738 cd ${.CURDIR}/${_tool}; \ 739 ${MAKE} DIRPRFX=${_tool}/ obj; \ 740 ${MAKE} DIRPRFX=${_tool}/ build-tools 741.endfor 742 743# 744# cross-tools: Build cross-building tools 745# 746.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 747 ${BOOTSTRAPPING} < 500037 748_elf2aout= usr.bin/elf2aout 749.endif 750 751.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 752_btxld= usr.sbin/btxld 753.endif 754 755.if (exists(${.CURDIR}/rescue) && defined(RESCUE) || \ 756 defined(RELEASEDIR)) && \ 757 (${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 501101) 758_crunchide= usr.sbin/crunch/crunchide 759.endif 760 761.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 762_elf2exe= usr.sbin/elf2exe 763.endif 764 765.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 766 defined(RELEASEDIR) 767_kgzip= usr.sbin/kgzip 768.endif 769 770cross-tools: 771.for _tool in \ 772 gnu/usr.bin/binutils \ 773 gnu/usr.bin/cc \ 774 ${_elf2aout} \ 775 usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \ 776 ${_btxld} \ 777 ${_crunchide} \ 778 ${_elf2exe} \ 779 ${_kgzip} 780 @${ECHODIR} "===> ${_tool}"; \ 781 cd ${.CURDIR}/${_tool}; \ 782 ${MAKE} DIRPRFX=${_tool}/ obj; \ 783 ${MAKE} DIRPRFX=${_tool}/ depend; \ 784 ${MAKE} DIRPRFX=${_tool}/ all; \ 785 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 786.endfor 787 788# 789# hierarchy - ensure that all the needed directories are present 790# 791hierarchy: 792 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 793 794# 795# libraries - build all libraries, and install them under ${DESTDIR}. 796# 797# The list of libraries with dependents (${_prebuild_libs}) and their 798# interdependencies (__L) are built automatically by the 799# ${.CURDIR}/tools/make_libdeps.sh script. 800# 801libraries: 802 cd ${.CURDIR}; \ 803 ${MAKE} -f Makefile.inc1 _startup_libs; \ 804 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 805 ${MAKE} -f Makefile.inc1 _generic_libs; 806 807# These dependencies are not automatically generated: 808# 809# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 810# shared libraries for ELF. 811# 812# lib/libc (libc_pic.a) must be built before lib/libpthread. 813# 814_startup_libs= gnu/lib/csu gnu/lib/libgcc 815.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 816_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 817.else 818_startup_libs+= lib/csu/${MACHINE_ARCH} 819.endif 820 821_prebuild_libs= 822_generic_libs= gnu/lib 823 824.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 825 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 826_prebuild_libs+= kerberos5/lib/libasn1 827_prebuild_libs+= kerberos5/lib/libgssapi 828_prebuild_libs+= kerberos5/lib/libkrb5 829_prebuild_libs+= kerberos5/lib/libroken 830_generic_libs+= kerberos5/lib 831.endif 832 833.if !defined(NOLIBPTHREAD) 834_prebuild_libs+= lib/libc 835.endif 836_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 837 lib/libkvm lib/libmd \ 838 lib/libncurses lib/libopie lib/libpam lib/libradius \ 839 lib/librpcsvc \ 840 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 841 lib/libz lib/msun 842 843lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 844lib/libypclnt__L: lib/librpcsvc__L 845 846_generic_libs+= lib 847 848.if !defined(NOCRYPT) 849.if !defined(NO_OPENSSL) 850_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 851.if !defined(NO_OPENSSH) 852_prebuild_libs+= secure/lib/libssh 853secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 854.endif 855.endif 856_generic_libs+= secure/lib 857.endif 858 859_generic_libs+= usr.bin/lex/lib 860 861.if ${MACHINE_ARCH} == "i386" 862_generic_libs+= usr.sbin/pcvt/keycap 863.endif 864 865.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 866${_lib}__L: .PHONY 867.if exists(${.CURDIR}/${_lib}) 868 @${ECHODIR} "===> ${_lib}"; \ 869 cd ${.CURDIR}/${_lib}; \ 870 ${MAKE} DIRPRFX=${_lib}/ depend; \ 871 ${MAKE} DIRPRFX=${_lib}/ all; \ 872 ${MAKE} DIRPRFX=${_lib}/ install 873.endif 874.endfor 875 876# libpam is special: we need to build static PAM modules before 877# static PAM library, and dynamic PAM library before dynamic PAM 878# modules. 879lib/libpam__L: .PHONY 880 @${ECHODIR} "===> lib/libpam"; \ 881 cd ${.CURDIR}/lib/libpam; \ 882 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 883 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 884 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 885 886_startup_libs: ${_startup_libs:S/$/__L/} 887_prebuild_libs: ${_prebuild_libs:S/$/__L/} 888_generic_libs: ${_generic_libs:S/$/__L/} 889 890.for __target in all clean cleandepend cleandir depend includes obj 891.for entry in ${SUBDIR} 892${entry}.${__target}__D: .PHONY 893 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 894 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 895 edir=${entry}.${MACHINE_ARCH}; \ 896 cd ${.CURDIR}/$${edir}; \ 897 else \ 898 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 899 edir=${entry}; \ 900 cd ${.CURDIR}/$${edir}; \ 901 fi; \ 902 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 903.endfor 904par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 905.endfor 906 907.include <bsd.subdir.mk> 908