1# 2# $FreeBSD$ 3# 4# Make command line options: 5# -DMAKE_KERBEROS5 to build Kerberos5 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNOSECURE do not go into secure subdir 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/sbin) 71SUBDIR+= sbin 72.endif 73.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 74SUBDIR+= secure 75.endif 76.if exists(${.CURDIR}/share) && !defined(NOSHARE) 77SUBDIR+= share 78.endif 79.if exists(${.CURDIR}/sys) 80SUBDIR+= sys 81.endif 82.if exists(${.CURDIR}/usr.bin) 83SUBDIR+= usr.bin 84.endif 85.if exists(${.CURDIR}/usr.sbin) 86SUBDIR+= usr.sbin 87.endif 88 89# etc must be last for "distribute" to work 90.if exists(${.CURDIR}/etc) 91SUBDIR+= etc 92.endif 93 94# These are last, since it is nice to at least get the base system 95# rebuilt before you do them. 96.if defined(LOCAL_DIRS) 97.for _DIR in ${LOCAL_DIRS} 98.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 99SUBDIR+= ${_DIR} 100.endif 101.endfor 102.endif 103 104.if defined(SUBDIR_OVERRIDE) 105SUBDIR= ${SUBDIR_OVERRIDE} 106.endif 107 108.if defined(NOCLEANDIR) 109CLEANDIR= clean cleandepend 110.else 111CLEANDIR= cleandir 112.endif 113 114CVS?= cvs 115SUP?= /usr/local/bin/cvsup 116SUPFLAGS?= -g -L 2 -P - 117.if defined(SUPHOST) 118SUPFLAGS+= -h ${SUPHOST} 119.endif 120 121MAKEOBJDIRPREFIX?= /usr/obj 122OSRELDATE!= sysctl -n kern.osreldate 123TARGET_ARCH?= ${MACHINE_ARCH} 124.if ${TARGET_ARCH} == ${MACHINE_ARCH} 125TARGET?= ${MACHINE} 126TARGET_CPUTYPE?=${CPUTYPE} 127.else 128TARGET?= ${TARGET_ARCH} 129TARGET_CPUTYPE?= 130.endif 131.if !empty(TARGET_CPUTYPE) 132_TARGET_CPUTYPE=${TARGET_CPUTYPE} 133.else 134_TARGET_CPUTYPE=dummy 135.endif 136_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 137 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 138.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 139.error CPUTYPE global should be set with ?=. 140.endif 141.if make(buildworld) 142BUILD_ARCH!= sysctl -n hw.machine_arch 143.if ${MACHINE_ARCH} != ${BUILD_ARCH} 144.error To cross-build, set TARGET_ARCH. 145.endif 146.endif 147.if ${MACHINE} == ${TARGET} 148OBJTREE= ${MAKEOBJDIRPREFIX} 149.else 150OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 151.endif 152WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 153# /usr/games added for fortune which depend on strfile 154STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 155TMPPATH= ${STRICTTMPPATH}:${PATH} 156 157INSTALLTMP!= /usr/bin/mktemp -d -u -t install 158 159# 160# Building a world goes through the following stages 161# 162# 1. bootstrap-tool stage [BMAKE] 163# This stage is responsible for creating programs that 164# are needed for backward compatibility reasons. They 165# are not built as cross-tools. 166# 2. build-tool stage [TMAKE] 167# This stage is responsible for creating the object 168# tree and building any tools that are needed during 169# the build process. 170# 3. cross-tool stage [XMAKE] 171# This stage is responsible for creating any tools that 172# are needed for cross-builds. A cross-compiler is one 173# of them. 174# 4. world stage [WMAKE] 175# This stage actually builds the world. 176# 5. install stage (optional) [IMAKE] 177# This stage installs a previously built world. 178# 179 180# Common environment for world related stages 181CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 182 MACHINE_ARCH=${TARGET_ARCH} \ 183 MACHINE=${TARGET} \ 184 CPUTYPE=${TARGET_CPUTYPE} \ 185 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \ 186 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \ 187 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac 188 189# bootstrap-tool stage 190BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \ 191 DESTDIR= \ 192 INSTALL="sh ${.CURDIR}/tools/install.sh" 193BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 194 BOOTSTRAPPING=${OSRELDATE} \ 195 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 196 -DNO_CPU_CFLAGS -DNO_WERROR 197 198# build-tool stage 199TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 200 DESTDIR= \ 201 INSTALL="sh ${.CURDIR}/tools/install.sh" 202TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 \ 203 BOOTSTRAPPING=${OSRELDATE} -DNO_CPU_CFLAGS 204 205# cross-tool stage 206XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 207 208# world stage 209WMAKEENV= ${CROSSENV} \ 210 DESTDIR=${WORLDTMP} \ 211 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 212 PATH=${TMPPATH} 213WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 214 215# install stage 216IMAKEENV= ${CROSSENV} \ 217 PATH=${STRICTTMPPATH}:${INSTALLTMP} 218IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 219 220# kernel stage 221KMAKEENV= ${WMAKEENV} 222 223USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \ 224 usr/libexec usr/sbin usr/share/misc \ 225 usr/share/dict \ 226 usr/share/groff_font/devX100 \ 227 usr/share/groff_font/devX100-12 \ 228 usr/share/groff_font/devX75 \ 229 usr/share/groff_font/devX75-12 \ 230 usr/share/groff_font/devascii \ 231 usr/share/groff_font/devcp1047 \ 232 usr/share/groff_font/devdvi \ 233 usr/share/groff_font/devhtml \ 234 usr/share/groff_font/devkoi8-r \ 235 usr/share/groff_font/devlatin1 \ 236 usr/share/groff_font/devlbp \ 237 usr/share/groff_font/devlj4 \ 238 usr/share/groff_font/devps \ 239 usr/share/groff_font/devutf8 \ 240 usr/share/tmac/mdoc usr/share/tmac/mm 241 242INCDIRS= arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \ 243 objc openssl protocols readline rpc rpcsvc security ufs 244 245# 246# buildworld 247# 248# Attempt to rebuild the entire system, with reasonable chance of 249# success, regardless of how old your existing system is. 250# 251_worldtmp: 252.if ${.CURDIR:C/[^,]//g} != "" 253# The m4 build of sendmail files doesn't like it if ',' is used 254# anywhere in the path of it's files. 255 @echo 256 @echo "*** Error: path to source tree contains a comma ','" 257 @echo 258 @false 259.endif 260 @echo 261 @echo "--------------------------------------------------------------" 262 @echo ">>> Rebuilding the temporary build tree" 263 @echo "--------------------------------------------------------------" 264.if !defined(NOCLEAN) 265 rm -rf ${WORLDTMP} 266.else 267 # XXX - These two can depend on any header file. 268 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 269 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 270.endif 271.for _dir in ${USRDIRS} 272 mkdir -p ${WORLDTMP}/${_dir} 273.endfor 274.for _dir in ${INCDIRS} 275 mkdir -p ${WORLDTMP}/usr/include/${_dir} 276.endfor 277 ln -sf ${.CURDIR}/sys ${WORLDTMP} 278_bootstrap-tools: 279 @echo 280 @echo "--------------------------------------------------------------" 281 @echo ">>> stage 1: bootstrap tools" 282 @echo "--------------------------------------------------------------" 283 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 284_cleanobj: 285.if !defined(NOCLEAN) 286 @echo 287 @echo "--------------------------------------------------------------" 288 @echo ">>> stage 2: cleaning up the object tree" 289 @echo "--------------------------------------------------------------" 290 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 291.endif 292_obj: 293 @echo 294 @echo "--------------------------------------------------------------" 295 @echo ">>> stage 2: rebuilding the object tree" 296 @echo "--------------------------------------------------------------" 297 cd ${.CURDIR}; ${WMAKE} par-obj 298_build-tools: 299 @echo 300 @echo "--------------------------------------------------------------" 301 @echo ">>> stage 2: build tools" 302 @echo "--------------------------------------------------------------" 303 cd ${.CURDIR}; ${TMAKE} build-tools 304_cross-tools: 305 @echo 306 @echo "--------------------------------------------------------------" 307 @echo ">>> stage 3: cross tools" 308 @echo "--------------------------------------------------------------" 309 cd ${.CURDIR}; ${XMAKE} cross-tools 310_includes: 311 @echo 312 @echo "--------------------------------------------------------------" 313 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 314 @echo "--------------------------------------------------------------" 315 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 316_libraries: 317 @echo 318 @echo "--------------------------------------------------------------" 319 @echo ">>> stage 4: building libraries" 320 @echo "--------------------------------------------------------------" 321 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 322_depend: 323 @echo 324 @echo "--------------------------------------------------------------" 325 @echo ">>> stage 4: make dependencies" 326 @echo "--------------------------------------------------------------" 327 cd ${.CURDIR}; ${WMAKE} par-depend 328everything: 329 @echo 330 @echo "--------------------------------------------------------------" 331 @echo ">>> stage 4: building everything.." 332 @echo "--------------------------------------------------------------" 333 cd ${.CURDIR}; ${WMAKE} all 334 335 336WMAKE_TGTS= 337.if !defined(SUBDIR_OVERRIDE) 338WMAKE_TGTS+= _worldtmp _bootstrap-tools 339.endif 340WMAKE_TGTS+= _cleanobj _obj _build-tools 341.if !defined(SUBDIR_OVERRIDE) 342WMAKE_TGTS+= _cross-tools 343.endif 344WMAKE_TGTS+= _includes _libraries _depend everything 345 346buildworld: ${WMAKE_TGTS} 347.ORDER: ${WMAKE_TGTS} 348 349# 350# installcheck 351# 352# Checks to be sure system is ready for installworld 353# 354installcheck: 355.if !defined(NO_SENDMAIL) 356 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 357 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 358 false; \ 359 fi 360 @if ! `grep -q '^smmsp:' /etc/group`; then \ 361 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 362 false; \ 363 fi 364.endif 365.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 366 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 367 @echo "Checking to see if your booted kernel is fresh enough.." 368 ${.OBJDIR}/bin/sh/sh -c \ 369 'echo "Testing installed kernel for new sigaction(2) syscall"' 370 @echo "Seems ok.." 371.endif 372 373# 374# distributeworld 375# 376# Distributes everything compiled by a `buildworld'. 377# 378# installworld 379# 380# Installs everything compiled by a 'buildworld'. 381# 382distributeworld installworld: installcheck 383 mkdir -p ${INSTALLTMP} 384 for prog in [ awk cap_mkdb cat chflags chmod chown \ 385 date echo egrep find grep \ 386 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 387 test true uname wc zic; do \ 388 cp `which $$prog` ${INSTALLTMP}; \ 389 done 390 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 391 rm -rf ${INSTALLTMP} 392 393# 394# reinstall 395# 396# If you have a build server, you can NFS mount the source and obj directories 397# and do a 'make reinstall' on the *client* to install new binaries from the 398# most recent server build. 399# 400reinstall: 401 @echo "--------------------------------------------------------------" 402 @echo ">>> Making hierarchy" 403 @echo "--------------------------------------------------------------" 404 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 405 @echo 406 @echo "--------------------------------------------------------------" 407 @echo ">>> Installing everything.." 408 @echo "--------------------------------------------------------------" 409 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 410.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 411 @echo 412 @echo "--------------------------------------------------------------" 413 @echo ">>> Rebuilding man page indices" 414 @echo "--------------------------------------------------------------" 415 cd ${.CURDIR}/share/man; ${MAKE} makedb 416.endif 417 418redistribute: 419 @echo "--------------------------------------------------------------" 420 @echo ">>> Distributing everything.." 421 @echo "--------------------------------------------------------------" 422 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 423 424# 425# buildkernel and installkernel 426# 427# Which kernels to build and/or install is specified by setting 428# KERNCONF. If not defined a GENERIC kernel is built/installed. 429# Only the existing (depending TARGET) config files are used 430# for building kernels and only the first of these is designated 431# as the one being installed. 432# 433# Note that we have to use TARGET instead of TARGET_ARCH when 434# we're in kernel-land. Since only TARGET_ARCH is (expected) to 435# be set to cross-build, we have to make sure TARGET is set 436# properly. 437 438.if !defined(KERNCONF) && defined(KERNEL) 439KERNCONF= ${KERNEL} 440KERNWARN= yes 441.else 442KERNCONF?= GENERIC 443.endif 444INSTKERNNAME?= kernel 445 446KRNLSRCDIR= ${.CURDIR}/sys 447KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 448KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 449KERNCONFDIR?= ${KRNLCONFDIR} 450 451BUILDKERNELS= 452INSTALLKERNEL= 453.for _kernel in ${KERNCONF} 454.if exists(${KERNCONFDIR}/${_kernel}) 455BUILDKERNELS+= ${_kernel} 456.if empty(INSTALLKERNEL) 457INSTALLKERNEL= ${_kernel} 458.endif 459.endif 460.endfor 461 462# 463# buildkernel 464# 465# Builds all kernels defined by BUILDKERNELS. 466# 467buildkernel: 468.if empty(BUILDKERNELS) 469 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 470 @false 471.endif 472.if defined(KERNWARN) 473 @echo "--------------------------------------------------------------" 474 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 475 @echo "--------------------------------------------------------------" 476 @sleep 3 477.endif 478 @echo 479.for _kernel in ${BUILDKERNELS} 480 @echo "--------------------------------------------------------------" 481 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 482 @echo "--------------------------------------------------------------" 483 @echo "===> ${_kernel}" 484 mkdir -p ${KRNLOBJDIR} 485.if !defined(NO_KERNELCONFIG) 486 cd ${KRNLCONFDIR}; \ 487 PATH=${TMPPATH} \ 488 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 489 ${KERNCONFDIR}/${_kernel} 490.endif 491.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 492 cd ${KRNLOBJDIR}/${_kernel}; \ 493 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 494.endif 495 cd ${KRNLOBJDIR}/${_kernel}; \ 496 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \ 497 ${MAKE} -DNO_CPU_CFLAGS -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile 498 cd ${KRNLOBJDIR}/${_kernel}; \ 499 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 500# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 501.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 502.for target in obj depend all 503 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 504 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 505 ${MAKE} -DNO_CPU_CFLAGS ${target} 506.endfor 507.endif 508.if !defined(NO_KERNELDEPEND) 509 cd ${KRNLOBJDIR}/${_kernel}; \ 510 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 511.endif 512 cd ${KRNLOBJDIR}/${_kernel}; \ 513 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 514 @echo "--------------------------------------------------------------" 515 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 516 @echo "--------------------------------------------------------------" 517.endfor 518 519# 520# installkernel 521# 522# Install the kernel defined by INSTALLKERNEL 523# 524installkernel reinstallkernel: 525.if empty(INSTALLKERNEL) 526 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 527 @false 528.endif 529 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 530 ${CROSSENV} PATH=${TMPPATH} \ 531 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 532 533# 534# update 535# 536# Update the source tree, by running sup and/or running cvs to update to the 537# latest copy. 538# 539update: 540.if defined(SUP_UPDATE) 541 @echo "--------------------------------------------------------------" 542 @echo ">>> Running ${SUP}" 543 @echo "--------------------------------------------------------------" 544.if defined(SUPFILE) 545 @${SUP} ${SUPFLAGS} ${SUPFILE} 546.endif 547.if defined(SUPFILE1) 548 @${SUP} ${SUPFLAGS} ${SUPFILE1} 549.endif 550.if defined(SUPFILE2) 551 @${SUP} ${SUPFLAGS} ${SUPFILE2} 552.endif 553.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 554 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 555.endif 556.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 557 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 558.endif 559.endif 560.if defined(CVS_UPDATE) 561 @echo "--------------------------------------------------------------" 562 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 563 @echo "--------------------------------------------------------------" 564 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 565.endif 566 567# 568# most 569# 570# Build most of the user binaries on the existing system libs and includes. 571# 572most: 573 @echo "--------------------------------------------------------------" 574 @echo ">>> Building programs only" 575 @echo "--------------------------------------------------------------" 576.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 577 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 578.endfor 579 580# 581# installmost 582# 583# Install the binaries built by the 'most' target. This does not include 584# libraries or include files. 585# 586installmost: 587 @echo "--------------------------------------------------------------" 588 @echo ">>> Installing programs only" 589 @echo "--------------------------------------------------------------" 590.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 591 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 592.endfor 593 594# 595# ------------------------------------------------------------------------ 596# 597# From here onwards are utility targets used by the 'make world' and 598# related targets. If your 'world' breaks, you may like to try to fix 599# the problem and manually run the following targets to attempt to 600# complete the build. Beware, this is *not* guaranteed to work, you 601# need to have a pretty good grip on the current state of the system 602# to attempt to manually finish it. If in doubt, 'make world' again. 603# 604 605# 606# bootstrap-tools: Build tools needed for compatibility 607# 608.if exists(${.CURDIR}/games) && !defined(NOGAMES) 609_strfile= games/fortune/strfile 610.endif 611 612bootstrap-tools: 613.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \ 614 usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \ 615 usr.bin/xargs usr.bin/xinstall \ 616 usr.sbin/config usr.sbin/kbdcontrol \ 617 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo 618 ${ECHODIR} "===> ${_tool}"; \ 619 cd ${.CURDIR}/${_tool}; \ 620 ${MAKE} DIRPRFX=${_tool}/ obj; \ 621 ${MAKE} DIRPRFX=${_tool}/ depend; \ 622 ${MAKE} DIRPRFX=${_tool}/ all; \ 623 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 624.endfor 625 626# 627# build-tools: Build special purpose build tools 628# 629.if defined(MODULES_WITH_WORLD) && exists(${KRNLSRCDIR}/modules) 630_aicasm= sys/modules/aic7xxx/aicasm 631.endif 632 633.if exists(${.CURDIR}/share) && !defined(NOSHARE) 634_share= share/syscons/scrnmaps 635.endif 636 637.if !defined(NO_FORTRAN) 638_fortran= gnu/usr.bin/cc/f771 639.endif 640 641.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 642 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 643_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 644 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 645.endif 646 647build-tools: 648.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 649 ${_libkrb5} lib/libncurses ${_share} \ 650 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 651 ${ECHODIR} "===> ${_tool}"; \ 652 cd ${.CURDIR}/${_tool}; \ 653 ${MAKE} DIRPRFX=${_tool}/ obj; \ 654 ${MAKE} DIRPRFX=${_tool}/ build-tools 655.endfor 656 657# 658# cross-tools: Build cross-building tools 659# 660.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha" 661_elf2exe= usr.sbin/elf2exe 662.endif 663 664.if ${TARGET_ARCH} == "i386" 665_btxld= usr.sbin/btxld 666_kgzip= usr.sbin/kgzip 667.endif 668 669.if ${TARGET_ARCH} == "sparc64" 670_elf2aout= usr.bin/elf2aout 671.endif 672 673_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 674 675cross-tools: 676.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 677 gnu/usr.bin/binutils usr.sbin/crunch/crunchide \ 678 gnu/usr.bin/cc ${_xlint} ${_kgzip} 679 ${ECHODIR} "===> ${_tool}"; \ 680 cd ${.CURDIR}/${_tool}; \ 681 ${MAKE} DIRPRFX=${_tool}/ obj; \ 682 ${MAKE} DIRPRFX=${_tool}/ depend; \ 683 ${MAKE} DIRPRFX=${_tool}/ all; \ 684 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 685.endfor 686 687# 688# hierarchy - ensure that all the needed directories are present 689# 690hierarchy: 691 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 692 693# 694# libraries - build all libraries, and install them under ${DESTDIR}. 695# 696# The list of libraries with dependents (${_prebuild_libs}) and their 697# interdependencies (__L) are built automatically by the 698# ${.CURDIR}/tools/make_libdeps.sh script. 699# 700libraries: 701 cd ${.CURDIR}; \ 702 ${MAKE} -f Makefile.inc1 _startup_libs; \ 703 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 704 ${MAKE} -f Makefile.inc1 _generic_libs; 705 706# These dependencies are not automatically generated: 707# 708# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 709# shared libraries for ELF. 710# 711_startup_libs= gnu/lib/csu gnu/lib/libgcc 712.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 713_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 714.else 715_startup_libs+= lib/csu/${MACHINE_ARCH} 716.endif 717 718_prebuild_libs= 719 720_generic_libs= gnu/lib 721 722.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 723_prebuild_libs+= kerberos5/lib/libasn1 724_prebuild_libs+= kerberos5/lib/libgssapi 725_prebuild_libs+= kerberos5/lib/libkrb5 726_prebuild_libs+= kerberos5/lib/libroken 727_generic_libs+= kerberos5/lib 728.endif 729 730_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 731 lib/libncurses lib/libopie lib/libpam lib/libradius \ 732 lib/librpcsvc \ 733 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 734 lib/libz lib/msun 735 736lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 737lib/libypclnt__L: lib/librpcsvc__L 738 739_generic_libs+= lib 740 741.if !defined(NOCRYPT) && !defined(NOSECURE) 742.if !defined(NO_OPENSSL) 743_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 744.if !defined(NO_OPENSSH) 745_prebuild_libs+= secure/lib/libssh 746secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 747.endif 748.endif 749_generic_libs+= secure/lib 750.endif 751 752_generic_libs+= usr.bin/lex/lib 753 754.if ${MACHINE_ARCH} == "i386" 755_generic_libs+= usr.sbin/pcvt/keycap 756.endif 757 758.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 759${_lib}__L: .PHONY 760.if exists(${.CURDIR}/${_lib}) 761 ${ECHODIR} "===> ${_lib}"; \ 762 cd ${.CURDIR}/${_lib}; \ 763 ${MAKE} DIRPRFX=${_lib}/ depend; \ 764 ${MAKE} DIRPRFX=${_lib}/ all; \ 765 ${MAKE} DIRPRFX=${_lib}/ install 766.endif 767.endfor 768 769# libpam is special: we need to build static PAM modules before 770# static PAM library, and dynamic PAM library before dynamic PAM 771# modules. 772lib/libpam__L: .PHONY 773 ${ECHODIR} "===> lib/libpam"; \ 774 cd ${.CURDIR}/lib/libpam; \ 775 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 776 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 777 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 778 779_startup_libs: ${_startup_libs:S/$/__L/} 780_prebuild_libs: ${_prebuild_libs:S/$/__L/} 781_generic_libs: ${_generic_libs:S/$/__L/} 782 783.for __target in clean cleandepend cleandir depend includes obj 784.for entry in ${SUBDIR} 785${entry}.${__target}__D: .PHONY 786 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 787 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 788 edir=${entry}.${MACHINE_ARCH}; \ 789 cd ${.CURDIR}/$${edir}; \ 790 else \ 791 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 792 edir=${entry}; \ 793 cd ${.CURDIR}/$${edir}; \ 794 fi; \ 795 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 796.endfor 797par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 798.endfor 799 800.include <bsd.subdir.mk> 801