1# 2# $FreeBSD$ 3# 4# Make command line options: 5# -DMAKE_KERBEROS5 to build Kerberos5 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNOSECURE do not go into secure subdir 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/sbin) 71SUBDIR+= sbin 72.endif 73.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 74SUBDIR+= secure 75.endif 76.if exists(${.CURDIR}/share) && !defined(NOSHARE) 77SUBDIR+= share 78.endif 79.if exists(${.CURDIR}/sys) 80SUBDIR+= sys 81.endif 82.if exists(${.CURDIR}/usr.bin) 83SUBDIR+= usr.bin 84.endif 85.if exists(${.CURDIR}/usr.sbin) 86SUBDIR+= usr.sbin 87.endif 88 89# etc must be last for "distribute" to work 90.if exists(${.CURDIR}/etc) 91SUBDIR+= etc 92.endif 93 94# These are last, since it is nice to at least get the base system 95# rebuilt before you do them. 96.if defined(LOCAL_DIRS) 97.for _DIR in ${LOCAL_DIRS} 98.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 99SUBDIR+= ${_DIR} 100.endif 101.endfor 102.endif 103 104.if defined(SUBDIR_OVERRIDE) 105SUBDIR= ${SUBDIR_OVERRIDE} 106.endif 107 108.if defined(NOCLEANDIR) 109CLEANDIR= clean cleandepend 110.else 111CLEANDIR= cleandir 112.endif 113 114CVS?= cvs 115SUP?= /usr/local/bin/cvsup 116SUPFLAGS?= -g -L 2 -P - 117.if defined(SUPHOST) 118SUPFLAGS+= -h ${SUPHOST} 119.endif 120 121MAKEOBJDIRPREFIX?= /usr/obj 122OSRELDATE!= sysctl -n kern.osreldate 123TARGET_ARCH?= ${MACHINE_ARCH} 124.if ${TARGET_ARCH} == ${MACHINE_ARCH} 125TARGET?= ${MACHINE} 126TARGET_CPUTYPE?=${CPUTYPE} 127.else 128TARGET?= ${TARGET_ARCH} 129TARGET_CPUTYPE?= 130.endif 131.if !empty(TARGET_CPUTYPE) 132_TARGET_CPUTYPE=${TARGET_CPUTYPE} 133.else 134_TARGET_CPUTYPE=dummy 135.endif 136_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 137 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 138.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 139.error CPUTYPE global should be set with ?=. 140.endif 141.if make(buildworld) 142BUILD_ARCH!= sysctl -n hw.machine_arch 143.if ${MACHINE_ARCH} != ${BUILD_ARCH} 144.error To cross-build, set TARGET_ARCH. 145.endif 146.endif 147.if ${MACHINE} == ${TARGET} 148OBJTREE= ${MAKEOBJDIRPREFIX} 149.else 150OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 151.endif 152WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 153# /usr/games added for fortune which depend on strfile 154STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 155TMPPATH= ${STRICTTMPPATH}:${PATH} 156 157INSTALLTMP!= /usr/bin/mktemp -d -u -t install 158 159# 160# Building a world goes through the following stages 161# 162# 1. bootstrap-tool stage [BMAKE] 163# This stage is responsible for creating programs that 164# are needed for backward compatibility reasons. They 165# are not built as cross-tools. 166# 2. build-tool stage [TMAKE] 167# This stage is responsible for creating the object 168# tree and building any tools that are needed during 169# the build process. 170# 3. cross-tool stage [XMAKE] 171# This stage is responsible for creating any tools that 172# are needed for cross-builds. A cross-compiler is one 173# of them. 174# 4. world stage [WMAKE] 175# This stage actually builds the world. 176# 5. install stage (optional) [IMAKE] 177# This stage installs a previously built world. 178# 179 180# Common environment for world related stages 181CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 182 MACHINE_ARCH=${TARGET_ARCH} \ 183 MACHINE=${TARGET} \ 184 CPUTYPE=${TARGET_CPUTYPE} \ 185 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \ 186 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \ 187 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac 188 189# bootstrap-tool stage 190BMAKEENV= DESTDIR= \ 191 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 192 __MAKE_CONF=${.CURDIR}/tools/build/Makefile.boot \ 193 OLD_MAKE_CONF=${__MAKE_CONF} \ 194 WORLDTMP=${WORLDTMP} 195BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 196 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 197 BOOTSTRAPPING=${OSRELDATE} \ 198 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 199 -DNO_CPU_CFLAGS -DNO_WARNS 200 201# build-tool stage 202TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 203 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 204 BOOTSTRAPPING=${OSRELDATE} -DNO_CPU_CFLAGS -DNO_WARNS 205 206# cross-tool stage 207XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 208 209# world stage 210WMAKEENV= ${CROSSENV} \ 211 DESTDIR=${WORLDTMP} \ 212 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 213 PATH=${TMPPATH} 214WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 215 216# install stage 217IMAKEENV= ${CROSSENV} \ 218 PATH=${STRICTTMPPATH}:${INSTALLTMP} 219IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 220 221# kernel stage 222KMAKEENV= ${WMAKEENV} 223 224USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \ 225 usr/libexec usr/sbin usr/share/misc \ 226 usr/share/dict \ 227 usr/share/groff_font/devX100 \ 228 usr/share/groff_font/devX100-12 \ 229 usr/share/groff_font/devX75 \ 230 usr/share/groff_font/devX75-12 \ 231 usr/share/groff_font/devascii \ 232 usr/share/groff_font/devcp1047 \ 233 usr/share/groff_font/devdvi \ 234 usr/share/groff_font/devhtml \ 235 usr/share/groff_font/devkoi8-r \ 236 usr/share/groff_font/devlatin1 \ 237 usr/share/groff_font/devlbp \ 238 usr/share/groff_font/devlj4 \ 239 usr/share/groff_font/devps \ 240 usr/share/groff_font/devutf8 \ 241 usr/share/tmac/mdoc usr/share/tmac/mm 242 243INCDIRS= arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \ 244 objc openssl protocols readline rpc rpcsvc security ufs 245 246# 247# buildworld 248# 249# Attempt to rebuild the entire system, with reasonable chance of 250# success, regardless of how old your existing system is. 251# 252_worldtmp: 253.if ${.CURDIR:C/[^,]//g} != "" 254# The m4 build of sendmail files doesn't like it if ',' is used 255# anywhere in the path of it's files. 256 @echo 257 @echo "*** Error: path to source tree contains a comma ','" 258 @echo 259 @false 260.endif 261 @echo 262 @echo "--------------------------------------------------------------" 263 @echo ">>> Rebuilding the temporary build tree" 264 @echo "--------------------------------------------------------------" 265.if !defined(NOCLEAN) 266 rm -rf ${WORLDTMP} 267.else 268 # XXX - These two can depend on any header file. 269 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 270 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 271.endif 272.for _dir in ${USRDIRS} 273 mkdir -p ${WORLDTMP}/${_dir} 274.endfor 275.for _dir in ${INCDIRS} 276 mkdir -p ${WORLDTMP}/usr/include/${_dir} 277.endfor 278 ln -sf ${.CURDIR}/sys ${WORLDTMP} 279_bootstrap-tools: 280 @echo 281 @echo "--------------------------------------------------------------" 282 @echo ">>> stage 1: bootstrap tools" 283 @echo "--------------------------------------------------------------" 284 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 285_cleanobj: 286.if !defined(NOCLEAN) 287 @echo 288 @echo "--------------------------------------------------------------" 289 @echo ">>> stage 2: cleaning up the object tree" 290 @echo "--------------------------------------------------------------" 291 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 292.endif 293_obj: 294 @echo 295 @echo "--------------------------------------------------------------" 296 @echo ">>> stage 2: rebuilding the object tree" 297 @echo "--------------------------------------------------------------" 298 cd ${.CURDIR}; ${WMAKE} par-obj 299_build-tools: 300 @echo 301 @echo "--------------------------------------------------------------" 302 @echo ">>> stage 2: build tools" 303 @echo "--------------------------------------------------------------" 304 cd ${.CURDIR}; ${TMAKE} build-tools 305_cross-tools: 306 @echo 307 @echo "--------------------------------------------------------------" 308 @echo ">>> stage 3: cross tools" 309 @echo "--------------------------------------------------------------" 310 cd ${.CURDIR}; ${XMAKE} cross-tools 311_includes: 312 @echo 313 @echo "--------------------------------------------------------------" 314 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 315 @echo "--------------------------------------------------------------" 316 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 317_libraries: 318 @echo 319 @echo "--------------------------------------------------------------" 320 @echo ">>> stage 4: building libraries" 321 @echo "--------------------------------------------------------------" 322 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 323_depend: 324 @echo 325 @echo "--------------------------------------------------------------" 326 @echo ">>> stage 4: make dependencies" 327 @echo "--------------------------------------------------------------" 328 cd ${.CURDIR}; ${WMAKE} par-depend 329everything: 330 @echo 331 @echo "--------------------------------------------------------------" 332 @echo ">>> stage 4: building everything.." 333 @echo "--------------------------------------------------------------" 334 cd ${.CURDIR}; ${WMAKE} par-all 335 336 337WMAKE_TGTS= 338.if !defined(SUBDIR_OVERRIDE) 339WMAKE_TGTS+= _worldtmp _bootstrap-tools 340.endif 341WMAKE_TGTS+= _cleanobj _obj _build-tools 342.if !defined(SUBDIR_OVERRIDE) 343WMAKE_TGTS+= _cross-tools 344.endif 345WMAKE_TGTS+= _includes _libraries _depend everything 346 347buildworld: ${WMAKE_TGTS} 348.ORDER: ${WMAKE_TGTS} 349 350# 351# installcheck 352# 353# Checks to be sure system is ready for installworld 354# 355installcheck: 356.if !defined(NO_SENDMAIL) 357 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 358 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 359 false; \ 360 fi 361 @if ! `grep -q '^smmsp:' /etc/group`; then \ 362 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 363 false; \ 364 fi 365.endif 366.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 367 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 368 @echo "Checking to see if your booted kernel is fresh enough.." 369 ${.OBJDIR}/bin/sh/sh -c \ 370 'echo "Testing installed kernel for new sigaction(2) syscall"' 371 @echo "Seems ok.." 372.endif 373 374# 375# distributeworld 376# 377# Distributes everything compiled by a `buildworld'. 378# 379# installworld 380# 381# Installs everything compiled by a 'buildworld'. 382# 383distributeworld installworld: installcheck 384 mkdir -p ${INSTALLTMP} 385 for prog in [ awk cap_mkdb cat chflags chmod chown \ 386 date echo egrep find grep \ 387 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 388 test true uname wc zic; do \ 389 cp `which $$prog` ${INSTALLTMP}; \ 390 done 391 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 392 rm -rf ${INSTALLTMP} 393 394# 395# reinstall 396# 397# If you have a build server, you can NFS mount the source and obj directories 398# and do a 'make reinstall' on the *client* to install new binaries from the 399# most recent server build. 400# 401reinstall: 402 @echo "--------------------------------------------------------------" 403 @echo ">>> Making hierarchy" 404 @echo "--------------------------------------------------------------" 405 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 406 @echo 407 @echo "--------------------------------------------------------------" 408 @echo ">>> Installing everything.." 409 @echo "--------------------------------------------------------------" 410 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 411.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 412 @echo 413 @echo "--------------------------------------------------------------" 414 @echo ">>> Rebuilding man page indices" 415 @echo "--------------------------------------------------------------" 416 cd ${.CURDIR}/share/man; ${MAKE} makedb 417.endif 418 419redistribute: 420 @echo "--------------------------------------------------------------" 421 @echo ">>> Distributing everything.." 422 @echo "--------------------------------------------------------------" 423 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 424 425# 426# buildkernel and installkernel 427# 428# Which kernels to build and/or install is specified by setting 429# KERNCONF. If not defined a GENERIC kernel is built/installed. 430# Only the existing (depending TARGET) config files are used 431# for building kernels and only the first of these is designated 432# as the one being installed. 433# 434# Note that we have to use TARGET instead of TARGET_ARCH when 435# we're in kernel-land. Since only TARGET_ARCH is (expected) to 436# be set to cross-build, we have to make sure TARGET is set 437# properly. 438 439.if !defined(KERNCONF) && defined(KERNEL) 440KERNCONF= ${KERNEL} 441KERNWARN= yes 442.else 443KERNCONF?= GENERIC 444.endif 445INSTKERNNAME?= kernel 446 447KRNLSRCDIR= ${.CURDIR}/sys 448KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf 449KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 450KERNCONFDIR?= ${KRNLCONFDIR} 451 452BUILDKERNELS= 453INSTALLKERNEL= 454.for _kernel in ${KERNCONF} 455.if exists(${KERNCONFDIR}/${_kernel}) 456BUILDKERNELS+= ${_kernel} 457.if empty(INSTALLKERNEL) 458INSTALLKERNEL= ${_kernel} 459.endif 460.endif 461.endfor 462 463# 464# buildkernel 465# 466# Builds all kernels defined by BUILDKERNELS. 467# 468buildkernel: 469.if empty(BUILDKERNELS) 470 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 471 @false 472.endif 473.if defined(KERNWARN) 474 @echo "--------------------------------------------------------------" 475 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 476 @echo "--------------------------------------------------------------" 477 @sleep 3 478.endif 479 @echo 480.for _kernel in ${BUILDKERNELS} 481 @echo "--------------------------------------------------------------" 482 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 483 @echo "--------------------------------------------------------------" 484 @echo "===> ${_kernel}" 485 mkdir -p ${KRNLOBJDIR} 486.if !defined(NO_KERNELCONFIG) 487 cd ${KRNLCONFDIR}; \ 488 PATH=${TMPPATH} \ 489 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 490 ${KERNCONFDIR}/${_kernel} 491.endif 492.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 493 cd ${KRNLOBJDIR}/${_kernel}; \ 494 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 495.endif 496 cd ${KRNLOBJDIR}/${_kernel}; \ 497 MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \ 498 ${MAKE} -DNO_CPU_CFLAGS -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile 499 cd ${KRNLOBJDIR}/${_kernel}; \ 500 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 501# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 502.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules) 503.for target in obj depend all 504 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 505 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 506 ${MAKE} -DNO_CPU_CFLAGS ${target} 507.endfor 508.endif 509.if !defined(NO_KERNELDEPEND) 510 cd ${KRNLOBJDIR}/${_kernel}; \ 511 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 512.endif 513 cd ${KRNLOBJDIR}/${_kernel}; \ 514 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 515 @echo "--------------------------------------------------------------" 516 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 517 @echo "--------------------------------------------------------------" 518.endfor 519 520# 521# installkernel 522# 523# Install the kernel defined by INSTALLKERNEL 524# 525installkernel reinstallkernel: 526.if empty(INSTALLKERNEL) 527 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 528 @false 529.endif 530 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 531 ${CROSSENV} PATH=${TMPPATH} \ 532 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 533 534# 535# update 536# 537# Update the source tree, by running sup and/or running cvs to update to the 538# latest copy. 539# 540update: 541.if defined(SUP_UPDATE) 542 @echo "--------------------------------------------------------------" 543 @echo ">>> Running ${SUP}" 544 @echo "--------------------------------------------------------------" 545.if defined(SUPFILE) 546 @${SUP} ${SUPFLAGS} ${SUPFILE} 547.endif 548.if defined(SUPFILE1) 549 @${SUP} ${SUPFLAGS} ${SUPFILE1} 550.endif 551.if defined(SUPFILE2) 552 @${SUP} ${SUPFLAGS} ${SUPFILE2} 553.endif 554.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 555 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 556.endif 557.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 558 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 559.endif 560.endif 561.if defined(CVS_UPDATE) 562 @echo "--------------------------------------------------------------" 563 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 564 @echo "--------------------------------------------------------------" 565 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 566.endif 567 568# 569# most 570# 571# Build most of the user binaries on the existing system libs and includes. 572# 573most: 574 @echo "--------------------------------------------------------------" 575 @echo ">>> Building programs only" 576 @echo "--------------------------------------------------------------" 577.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 578 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 579.endfor 580 581# 582# installmost 583# 584# Install the binaries built by the 'most' target. This does not include 585# libraries or include files. 586# 587installmost: 588 @echo "--------------------------------------------------------------" 589 @echo ">>> Installing programs only" 590 @echo "--------------------------------------------------------------" 591.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 592 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 593.endfor 594 595# 596# ------------------------------------------------------------------------ 597# 598# From here onwards are utility targets used by the 'make world' and 599# related targets. If your 'world' breaks, you may like to try to fix 600# the problem and manually run the following targets to attempt to 601# complete the build. Beware, this is *not* guaranteed to work, you 602# need to have a pretty good grip on the current state of the system 603# to attempt to manually finish it. If in doubt, 'make world' again. 604# 605 606# 607# bootstrap-tools: Build tools needed for compatibility 608# 609.if exists(${.CURDIR}/games) && !defined(NOGAMES) 610_strfile= games/fortune/strfile 611.endif 612 613bootstrap-tools: 614.for _tool in tools/build ${_strfile} usr.bin/yacc usr.bin/colldef \ 615 usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \ 616 usr.bin/xargs usr.bin/xinstall \ 617 usr.sbin/config usr.sbin/kbdcontrol \ 618 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo 619 @${ECHODIR} "===> ${_tool}"; \ 620 cd ${.CURDIR}/${_tool}; \ 621 ${MAKE} DIRPRFX=${_tool}/ obj; \ 622 ${MAKE} DIRPRFX=${_tool}/ depend; \ 623 ${MAKE} DIRPRFX=${_tool}/ all; \ 624 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 625.endfor 626 627# 628# build-tools: Build special purpose build tools 629# 630.if defined(MODULES_WITH_WORLD) && exists(${KRNLSRCDIR}/modules) 631_aicasm= sys/modules/aic7xxx/aicasm 632.endif 633 634.if exists(${.CURDIR}/share) && !defined(NOSHARE) 635_share= share/syscons/scrnmaps 636.endif 637 638.if !defined(NO_FORTRAN) 639_fortran= gnu/usr.bin/cc/f771 640.endif 641 642.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 643 !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 644_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 645 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 646.endif 647 648build-tools: 649.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 650 ${_libkrb5} lib/libncurses ${_share} \ 651 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 652 @${ECHODIR} "===> ${_tool}"; \ 653 cd ${.CURDIR}/${_tool}; \ 654 ${MAKE} DIRPRFX=${_tool}/ obj; \ 655 ${MAKE} DIRPRFX=${_tool}/ build-tools 656.endfor 657 658# 659# cross-tools: Build cross-building tools 660# 661.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 662_elf2exe= usr.sbin/elf2exe 663.endif 664 665.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 666_btxld= usr.sbin/btxld 667.if defined(RELEASEDIR) 668_kgzip= usr.sbin/kgzip 669.endif 670.endif 671 672.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} 673_elf2aout= usr.bin/elf2aout 674.endif 675 676.if defined(RELEASEDIR) 677_crunchide= usr.sbin/crunch/crunchide 678.endif 679 680_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 681 682cross-tools: 683.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 684 gnu/usr.bin/binutils ${_crunchide} \ 685 gnu/usr.bin/cc ${_xlint} ${_kgzip} 686 @${ECHODIR} "===> ${_tool}"; \ 687 cd ${.CURDIR}/${_tool}; \ 688 ${MAKE} DIRPRFX=${_tool}/ obj; \ 689 ${MAKE} DIRPRFX=${_tool}/ depend; \ 690 ${MAKE} DIRPRFX=${_tool}/ all; \ 691 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 692.endfor 693 694# 695# hierarchy - ensure that all the needed directories are present 696# 697hierarchy: 698 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 699 700# 701# libraries - build all libraries, and install them under ${DESTDIR}. 702# 703# The list of libraries with dependents (${_prebuild_libs}) and their 704# interdependencies (__L) are built automatically by the 705# ${.CURDIR}/tools/make_libdeps.sh script. 706# 707libraries: 708 cd ${.CURDIR}; \ 709 ${MAKE} -f Makefile.inc1 _startup_libs; \ 710 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 711 ${MAKE} -f Makefile.inc1 _generic_libs; 712 713# These dependencies are not automatically generated: 714# 715# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 716# shared libraries for ELF. 717# 718_startup_libs= gnu/lib/csu gnu/lib/libgcc 719.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 720_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 721.else 722_startup_libs+= lib/csu/${MACHINE_ARCH} 723.endif 724 725_prebuild_libs= 726 727_generic_libs= gnu/lib 728 729.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5) 730_prebuild_libs+= kerberos5/lib/libasn1 731_prebuild_libs+= kerberos5/lib/libgssapi 732_prebuild_libs+= kerberos5/lib/libkrb5 733_prebuild_libs+= kerberos5/lib/libroken 734_generic_libs+= kerberos5/lib 735.endif 736 737_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 738 lib/libncurses lib/libopie lib/libpam lib/libradius \ 739 lib/librpcsvc \ 740 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 741 lib/libz lib/msun 742 743lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 744lib/libypclnt__L: lib/librpcsvc__L 745 746_generic_libs+= lib 747 748.if !defined(NOCRYPT) && !defined(NOSECURE) 749.if !defined(NO_OPENSSL) 750_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 751.if !defined(NO_OPENSSH) 752_prebuild_libs+= secure/lib/libssh 753secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 754.endif 755.endif 756_generic_libs+= secure/lib 757.endif 758 759_generic_libs+= usr.bin/lex/lib 760 761.if ${MACHINE_ARCH} == "i386" 762_generic_libs+= usr.sbin/pcvt/keycap 763.endif 764 765.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 766${_lib}__L: .PHONY 767.if exists(${.CURDIR}/${_lib}) 768 @${ECHODIR} "===> ${_lib}"; \ 769 cd ${.CURDIR}/${_lib}; \ 770 ${MAKE} DIRPRFX=${_lib}/ depend; \ 771 ${MAKE} DIRPRFX=${_lib}/ all; \ 772 ${MAKE} DIRPRFX=${_lib}/ install 773.endif 774.endfor 775 776# libpam is special: we need to build static PAM modules before 777# static PAM library, and dynamic PAM library before dynamic PAM 778# modules. 779lib/libpam__L: .PHONY 780 @${ECHODIR} "===> lib/libpam"; \ 781 cd ${.CURDIR}/lib/libpam; \ 782 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 783 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 784 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 785 786_startup_libs: ${_startup_libs:S/$/__L/} 787_prebuild_libs: ${_prebuild_libs:S/$/__L/} 788_generic_libs: ${_generic_libs:S/$/__L/} 789 790.for __target in all clean cleandepend cleandir depend includes obj 791.for entry in ${SUBDIR} 792${entry}.${__target}__D: .PHONY 793 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 794 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 795 edir=${entry}.${MACHINE_ARCH}; \ 796 cd ${.CURDIR}/$${edir}; \ 797 else \ 798 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 799 edir=${entry}; \ 800 cd ${.CURDIR}/$${edir}; \ 801 fi; \ 802 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 803.endfor 804par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 805.endfor 806 807.include <bsd.subdir.mk> 808