Home
last modified time | relevance | path

Searched refs:DTR (Results 1 – 13 of 13) sorted by relevance

/titanic_44/usr/src/uts/i86pc/boot/
H A Dboot_serial.h52 #define DTR 0x01 macro
H A Dboot_console.c384 uchar_t mcr = DTR | RTS; in serial_adjust_prop()
/titanic_44/usr/src/uts/sun4/sys/
H A Dsudev.h126 #define DTR 0x01 /* Data Terminal Ready */ macro
/titanic_44/usr/src/uts/i86pc/ml/
H A Dcpr_wakecode.s60 #define DTR 0x01 /* Data Terminal Ready */ macro
504 D16 movb $_CONST(RTS|DTR), %al / data term ready & req to send
525 D16 movb $_CONST(RTS|DTR), %al / data term ready & req to send
/titanic_44/usr/src/uts/sun4/io/
H A Dsu_driver.c626 OUTB(MCR, (DTR | RTS| OUT2)); in asyattach()
1011 OUTB(MCR, mcr|DTR); in asyopen()
1485 OUTB(MCR, DTR|RTS|OUT2); in asy_program()
2155 OUTB(MCR, (val & ~DTR)); in async_softint()
3640 if (mcr_r & DTR) in asytodm()
3678 b |= DTR; in dmtoasy()
/titanic_44/usr/src/uts/common/sys/
H A Dasy.h123 #define DTR 0x01 /* Data Terminal Ready */ macro
/titanic_44/usr/src/uts/common/io/
H A Dasy.c892 asy->asy_mcr |= RTS|DTR; /* do use RTS/DTR after open */ in asyattach()
1418 DTR | RTS | ASY_LOOP | OUT1 | OUT2); in asy_identify_chip()
1635 mcr|(asy->asy_mcr&DTR)); in asyopen()
1640 unit, mcr|(asy->asy_mcr&DTR), in asyopen()
2755 asy->asy_ioaddr + MCR, (val & ~DTR)); in async_softint()
4310 if (mcr_r & DTR) in asytodm()
4351 b |= DTR; in dmtoasy()
/titanic_44/usr/src/cmd/lp/model/
H A Dstandard623 # send if the printer drops DTR. An example of the former is the
627 # AT&T 455, which momentarily drops DTR when it gets the
H A Dtsol_standard640 # send if the printer drops DTR. An example of the former is the
644 # AT&T 455, which momentarily drops DTR when it gets the
H A Dtsol_standard_foomatic666 # send if the printer drops DTR. An example of the former is the
670 # AT&T 455, which momentarily drops DTR when it gets the
/titanic_44/usr/src/cmd/terminfo/
H A Dtermcap.src6131 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6137 # set ADM-12+ for DTR handshaking from supervisor setup.
6610 # S2 10 DTR status (pin 20)
6652 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
6823 # 3 Open, 4 Closed: DTR on when terminal is on
6824 # 3 Closed, 4 Open: DTR is connected to RTS
7088 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding:\
7239 # 10 X DTR Disconnected
7240 # X DTR connected
8047 # DTR handshaking, you can use even greater speeds.
[all …]
H A Dterminfo.src6929 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6935 # set ADM-12+ for DTR handshaking from supervisor setup.
7432 # S2 10 DTR status (pin 20)
7476 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7650 # 3 Open, 4 Closed: DTR on when terminal is on
7651 # 3 Closed, 4 Open: DTR is connected to RTS
7925 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8082 # 10 X DTR Disconnected
8083 # X DTR connected
9001 # DTR handshaking, you can use even greater speeds.
[all …]
/titanic_44/usr/src/data/hwdata/
H A Dpci.ids31594 # 8 port 16550 compatible UART, PMC format, RS-232 IO, RTS, CTS, DTR, DSR supported