xref: /titanic_41/usr/src/lib/fm/topo/libtopo/common/libtopo.h (revision 0b42f15ac52b077791d4ba079e8c163c592c3fda)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
24  */
25 
26 #ifndef _LIBTOPO_H
27 #define	_LIBTOPO_H
28 
29 #include <sys/nvpair.h>
30 #include <stdio.h>
31 #include <libdevinfo.h>
32 
33 #ifdef __cplusplus
34 extern "C" {
35 #endif
36 
37 #define	TOPO_VERSION	1	/* Library ABI Interface Version */
38 
39 typedef struct topo_hdl topo_hdl_t;
40 typedef struct topo_node tnode_t;
41 typedef struct topo_walk topo_walk_t;
42 typedef int32_t topo_instance_t;
43 typedef uint32_t topo_version_t;
44 
45 typedef struct topo_list {
46 	struct topo_list *l_prev;
47 	struct topo_list *l_next;
48 } topo_list_t;
49 
50 typedef struct topo_faclist {
51 	topo_list_t	tf_list;
52 	tnode_t		*tf_node;
53 } topo_faclist_t;
54 
55 /*
56  * The following functions, error codes and data structures are private
57  * to libtopo snapshot consumers and enumerator modules.
58  */
59 extern topo_hdl_t *topo_open(int, const char *, int *);
60 extern void topo_close(topo_hdl_t *);
61 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *);
62 extern void topo_snap_release(topo_hdl_t *);
63 
64 /*
65  * Snapshot walker support
66  */
67 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *);
68 
69 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t,
70     void *, int *);
71 extern int topo_walk_step(topo_walk_t *, int);
72 extern void topo_walk_fini(topo_walk_t *);
73 extern di_node_t topo_hdl_devinfo(topo_hdl_t *);
74 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *);
75 
76 /*
77  * Walk status returned from walker
78  */
79 #define	TOPO_WALK_ERR		-1
80 #define	TOPO_WALK_NEXT		0
81 #define	TOPO_WALK_TERMINATE	1
82 
83 /*
84  * Types of walks: depth-first (child) or breadth-first (sibling)
85  */
86 #define	TOPO_WALK_CHILD		0x0001
87 #define	TOPO_WALK_SIBLING	0x0002
88 
89 /*
90  * FMRI helper routines
91  */
92 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *);
93 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *);
94 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *);
95 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *);
96 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *);
97 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *);
98 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *);
99 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *);
100 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *);
101 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *);
102 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *);
103 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **,
104     int *);
105 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *);
106 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *);
107 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *);
108 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *,
109     uint32_t, topo_walk_cb_t, void *, int *);
110 
111 /*
112  * Consolidation private utility functions
113  */
114 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *);
115 extern ulong_t topo_fmri_strhash_noauth(topo_hdl_t *, const char *);
116 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *);
117 extern boolean_t topo_fmri_strcmp_noauth(topo_hdl_t *, const char *,
118     const char *);
119 
120 /*
121  * Topo node utilities: callable from topo_walk_step() callback or module
122  * enumeration, topo_mod_enumerate()
123  */
124 extern char *topo_node_name(tnode_t *);
125 extern topo_instance_t topo_node_instance(tnode_t *);
126 extern tnode_t *topo_node_parent(tnode_t *);
127 extern void *topo_node_private(tnode_t *);
128 extern int topo_node_flags(tnode_t *);
129 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *);
130 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *);
131 extern int topo_node_resource(tnode_t *, nvlist_t **, int *);
132 extern int topo_node_label(tnode_t *, char **, int *);
133 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t);
134 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t,
135     nvlist_t *, nvlist_t **, int *);
136 extern boolean_t topo_method_supported(tnode_t *, const char *,
137     topo_version_t);
138 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *,
139     uint32_t, topo_faclist_t *, int *);
140 extern int topo_node_child_walk(topo_hdl_t *, tnode_t *, topo_walk_cb_t,
141     void *, int *);
142 
143 /*
144  * Node flags: denotes type of node
145  */
146 #define	TOPO_NODE_DEFAULT	0
147 #define	TOPO_NODE_FACILITY	1
148 
149 #define	TOPO_FAC_TYPE_SENSOR	"sensor"
150 #define	TOPO_FAC_TYPE_INDICATOR	"indicator"
151 
152 /*
153  * Topo property get functions
154  */
155 extern int topo_prop_get_int32(tnode_t *, const char *, const char *,
156     int32_t *, int *);
157 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *,
158     uint32_t *, int *);
159 extern int topo_prop_get_int64(tnode_t *, const char *, const char *,
160     int64_t *, int *);
161 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *,
162     uint64_t *, int *);
163 extern int topo_prop_get_double(tnode_t *, const char *, const char *,
164     double *, int *);
165 extern int topo_prop_get_string(tnode_t *, const char *, const char *,
166     char **, int *);
167 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *,
168     nvlist_t **, int *);
169 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *,
170     int32_t **, uint_t *, int *);
171 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *,
172     uint32_t **, uint_t *, int *);
173 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *,
174     int64_t **, uint_t *, int *);
175 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *,
176     uint64_t **, uint_t *, int *);
177 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *,
178     char ***, uint_t *, int *);
179 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *,
180     nvlist_t ***, uint_t *, int *);
181 
182 /*
183  * Topo property set functions
184  */
185 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int,
186     int32_t, int *);
187 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int,
188     uint32_t, int *);
189 extern int topo_prop_set_int64(tnode_t *, const char *, const char *,
190     int, int64_t, int *);
191 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *,
192     int, uint64_t, int *);
193 extern int topo_prop_set_double(tnode_t *, const char *, const char *,
194     int, double, int *);
195 extern int topo_prop_set_string(tnode_t *, const char *, const char *,
196     int, const char *, int *);
197 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *,
198     int, const nvlist_t *, int *);
199 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int,
200     int32_t *, uint_t, int *);
201 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *,
202     int, uint32_t *, uint_t, int *);
203 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *,
204     int, int64_t *, uint_t, int *);
205 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *,
206     int, uint64_t *, uint_t, int *);
207 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *,
208     int, const char **, uint_t, int *);
209 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *,
210     int, const nvlist_t **, uint_t, int *);
211 
212 #define	TOPO_PROP_IMMUTABLE	0
213 #define	TOPO_PROP_MUTABLE	0x01
214 #define	TOPO_PROP_NONVOLATILE	0x02
215 
216 /* Protocol property group and property names */
217 #define	TOPO_PGROUP_PROTOCOL	"protocol"	/* Required property group */
218 #define	TOPO_PROP_RESOURCE	"resource"	/* resource FMRI */
219 #define	TOPO_PROP_ASRU		"ASRU"		/* ASRU FMRI */
220 #define	TOPO_PROP_FRU		"FRU"		/* FRU FMRI */
221 #define	TOPO_PROP_MOD		"module"	/* software module FMRI */
222 #define	TOPO_PROP_PKG		"package"	/* software package FMRI */
223 #define	TOPO_PROP_LABEL		"label"		/*  property LABEL */
224 
225 #define	TOPO_METH_FAC_ENUM	"fac_enum"
226 
227 /*
228  * System property group
229  */
230 #define	TOPO_PGROUP_SYSTEM	"system"
231 #define	TOPO_PROP_ISA		"isa"
232 #define	TOPO_PROP_MACHINE	"machine"
233 
234 #define	TOPO_PGROUP_IPMI	"ipmi"
235 
236 /*
237  * These enum definitions are used to define a set of error tags associated with
238  * libtopo error conditions occuring during the adminstration of
239  * properties, invocation of methods and fmri-based queries.  The shell script
240  * mkerror.sh is used to parse this file and create a corresponding topo_error.c
241  * source file.
242  *
243  * If you do something other than add a new error tag here, you may need to
244  * update the mkerror shell script as it is based upon simple regexps.
245  */
246 typedef enum topo_prop_errno {
247     ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */
248     ETOPO_PROP_NOENT,   /* undefined property or property group */
249     ETOPO_PROP_DEFD,    /* static property already defined */
250     ETOPO_PROP_NOMEM,   /* memory limit exceeded during property allocation */
251     ETOPO_PROP_TYPE,    /* invalid property type */
252     ETOPO_PROP_NAME,    /* invalid property name */
253     ETOPO_PROP_NOINHERIT, /* can not inherit property */
254     ETOPO_PROP_NVL,	/* malformed property nvlist */
255     ETOPO_PROP_METHOD,	/* get property method failed */
256     ETOPO_PROP_END	/* end of prop errno list (to ease auto-merge) */
257 } topo_prop_errno_t;
258 
259 typedef enum topo_method_errno {
260     ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */
261     ETOPO_METHOD_INVAL,		/* invalid method registration */
262     ETOPO_METHOD_NOTSUP,	/* method not supported */
263     ETOPO_METHOD_FAIL,		/* method failed */
264     ETOPO_METHOD_VEROLD,	/* app is compiled to use obsolete method */
265     ETOPO_METHOD_VERNEW,	/* app is compiled to use obsolete method */
266     ETOPO_METHOD_NOMEM,		/* memory limit exceeded during method op */
267     ETOPO_METHOD_DEFD,		/* method op already defined */
268     ETOPO_METHOD_END		/* end of method errno list */
269 } topo_method_errno_t;
270 
271 typedef enum topo_fmri_errno {
272     ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */
273     ETOPO_FMRI_NVL,		/* nvlist allocation failure for FMRI */
274     ETOPO_FMRI_VERSION,		/* invalid FMRI scheme version */
275     ETOPO_FMRI_MALFORM,		/* malformed FMRI */
276     ETOPO_FMRI_NOMEM,		/* memory limit exceeded */
277     ETOPO_FMRI_END		/* end of fmri errno list */
278 } topo_fmri_errno_t;
279 
280 typedef enum topo_hdl_errno {
281     ETOPO_HDL_UNKNOWN = 3300,	/* unknown topo handle error */
282     ETOPO_HDL_ABIVER,		/* handle opened with invalid ABI version */
283     ETOPO_HDL_SNAP,		/* snapshot already taken */
284     ETOPO_HDL_INVAL,		/* invalid argument specified */
285     ETOPO_HDL_UUID,		/* uuid already set */
286     ETOPO_HDL_NOMEM,		/* memory limit exceeded */
287     ETOPO_HDL_END		/* end of handle errno list */
288 } topo_hdl_errno_t;
289 
290 extern const char *topo_strerror(int);
291 extern void topo_hdl_strfree(topo_hdl_t *, char *);
292 extern void topo_debug_set(topo_hdl_t *, const char *, const char *);
293 
294 /*
295  * The following functions and data structures to support property
296  * observability are private to the fmtopo command.
297  */
298 
299 /*
300  * Each topology node advertises the name and data stability of each of its
301  * modules and properties. (see attributes(5)).
302  */
303 
304 /*
305  * Topo stability attributes
306  */
307 typedef enum topo_stability {
308 	TOPO_STABILITY_UNKNOWN = 0,	/* private to libtopo */
309 	TOPO_STABILITY_INTERNAL,	/* private to libtopo */
310 	TOPO_STABILITY_PRIVATE,		/* private to Sun */
311 	TOPO_STABILITY_OBSOLETE,	/* scheduled for removal */
312 	TOPO_STABILITY_EXTERNAL,	/* not controlled by Sun */
313 	TOPO_STABILITY_UNSTABLE,	/* new or rapidly changing */
314 	TOPO_STABILITY_EVOLVING,	/* less rapidly changing */
315 	TOPO_STABILITY_STABLE,		/* mature interface from Sun */
316 	TOPO_STABILITY_STANDARD		/* industry standard */
317 } topo_stability_t;
318 
319 #define	TOPO_STABILITY_MAX	TOPO_STABILITY_STANDARD	/* max valid stab */
320 
321 typedef struct topo_pgroup_info {
322 	const char *tpi_name;		/* property group name */
323 	topo_stability_t tpi_namestab;	/* stability of group name */
324 	topo_stability_t tpi_datastab;	/* stability of all property values */
325 	topo_version_t tpi_version;	/* version of pgroup definition */
326 } topo_pgroup_info_t;
327 
328 extern topo_stability_t topo_name2stability(const char *);
329 extern const char *topo_stability2name(topo_stability_t);
330 extern void topo_pgroup_destroy(tnode_t *, const char *);
331 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *);
332 
333 typedef enum {
334 	TOPO_TYPE_INVALID = 0,
335 	TOPO_TYPE_BOOLEAN,	/* boolean */
336 	TOPO_TYPE_INT32,	/* int32_t */
337 	TOPO_TYPE_UINT32,	/* uint32_t */
338 	TOPO_TYPE_INT64,	/* int64_t */
339 	TOPO_TYPE_UINT64,	/* uint64_t */
340 	TOPO_TYPE_STRING,	/* const char* */
341 	TOPO_TYPE_TIME,		/* uint64_t */
342 	TOPO_TYPE_SIZE,		/* uint64_t */
343 	TOPO_TYPE_FMRI,		/* nvlist_t */
344 	TOPO_TYPE_INT32_ARRAY,	/* array of int32_t */
345 	TOPO_TYPE_UINT32_ARRAY,	/* array of uint32_t */
346 	TOPO_TYPE_INT64_ARRAY,	/* array of int64_t */
347 	TOPO_TYPE_UINT64_ARRAY,	/* array of uint64_t */
348 	TOPO_TYPE_STRING_ARRAY,	/* array of const char* */
349 	TOPO_TYPE_FMRI_ARRAY,	/* array of nvlist_t */
350 	TOPO_TYPE_DOUBLE	/* double */
351 } topo_type_t;
352 
353 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err);
354 extern int topo_prop_getprop(tnode_t *, const char *, const char *,
355     nvlist_t *, nvlist_t **, int *);
356 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *);
357 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *,
358     int, nvlist_t *, int *);
359 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *,
360     const char *, nvlist_t *,  nvlist_t **, int *);
361 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *,
362     nvlist_t **, int *);
363 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *,
364     nvlist_t *, int, nvlist_t *, int *);
365 
366 /* Property node NVL names used in topo_prop_getprops */
367 #define	TOPO_PROP_GROUP		"property-group"
368 #define	TOPO_PROP_GROUP_NAME	"property-group-name"
369 #define	TOPO_PROP_GROUP_DSTAB	"property-group-data-stability"
370 #define	TOPO_PROP_GROUP_NSTAB	"property-group-name-stability"
371 #define	TOPO_PROP_GROUP_VERSION	"property-group-version"
372 #define	TOPO_PROP_VAL		"property"
373 #define	TOPO_PROP_VAL_NAME	"property-name"
374 #define	TOPO_PROP_VAL_VAL	"property-value"
375 #define	TOPO_PROP_VAL_TYPE	"property-type"
376 #define	TOPO_PROP_FLAG		"property-flag"
377 
378 /*
379  * ARGS list used in topo property methods
380  */
381 #define	TOPO_PROP_ARGS	"args"
382 #define	TOPO_PROP_PARGS	"private-args"
383 
384 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *);
385 
386 extern void *topo_hdl_alloc(topo_hdl_t *, size_t);
387 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t);
388 extern void topo_hdl_free(topo_hdl_t *, void *, size_t);
389 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t);
390 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **);
391 extern char *topo_hdl_strdup(topo_hdl_t *, const char *);
392 
393 /*
394  * Interfaces for converting sensor/indicator types, units, states, etc to
395  * a string
396  */
397 void topo_sensor_type_name(uint32_t type, char *buf, size_t len);
398 void topo_sensor_units_name(uint8_t type, char *buf, size_t len);
399 void topo_led_type_name(uint8_t type, char *buf, size_t len);
400 void topo_led_state_name(uint8_t type, char *buf, size_t len);
401 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf,
402     size_t len);
403 
404 /*
405  * Defines for standard properties for sensors and indicators
406  */
407 #define	TOPO_PGROUP_FACILITY	"facility"
408 
409 #define	TOPO_SENSOR_READING	"reading"
410 #define	TOPO_SENSOR_STATE	"state"
411 #define	TOPO_SENSOR_CLASS	"sensor-class"
412 #define	TOPO_FACILITY_TYPE	"type"
413 #define	TOPO_SENSOR_UNITS	"units"
414 #define	TOPO_LED_MODE		"mode"
415 
416 /*
417  * Sensor Classes
418  *
419  * The "sensor-class" property in the "facility" propgroup on
420  * facility nodes of type "sensor" should be set to one of these
421  * two values.
422  *
423  * Threshold sensors provide an analog sensor reading via the
424  * "reading" property in the facility propgroup.  They will also
425  * provide one or more discrete states via the "state" property
426  * in the facility propgroup.
427  *
428  * Discrete sensors will not provide an analog reading by will
429  * provide one or more discrete states via the "state" property
430  * in the facility propgroup.
431  */
432 #define	TOPO_SENSOR_CLASS_THRESHOLD	"threshold"
433 #define	TOPO_SENSOR_CLASS_DISCRETE	"discrete"
434 
435 /*
436  * Sensor unit types.  We're using the unit types and corresponding
437  * codes described in the IPMI 2.0 spec as a reference as it seems to be a
438  * reasonably comprehensive list.  This also simplifies the IPMI provider code
439  * since the unit type codes will map exactly to what libtopo uses (so no
440  * conversion necessary).
441  */
442 typedef enum topo_sensor_unit {
443 	TOPO_SENSOR_UNITS_UNSPECIFIED = 0,
444 	TOPO_SENSOR_UNITS_DEGREES_C,
445 	TOPO_SENSOR_UNITS_DEGREES_F,
446 	TOPO_SENSOR_UNITS_DEGREES_K,
447 	TOPO_SENSOR_UNITS_VOLTS,
448 	TOPO_SENSOR_UNITS_AMPS,
449 	TOPO_SENSOR_UNITS_WATTS,
450 	TOPO_SENSOR_UNITS_JOULES,
451 	TOPO_SENSOR_UNITS_COULOMBS,
452 	TOPO_SENSOR_UNITS_VA,
453 	TOPO_SENSOR_UNITS_NITS,
454 	TOPO_SENSOR_UNITS_LUMEN,
455 	TOPO_SENSOR_UNITS_LUX,
456 	TOPO_SENSOR_UNITS_CANDELA,
457 	TOPO_SENSOR_UNITS_KPA,
458 	TOPO_SENSOR_UNITS_PSI,
459 
460 	TOPO_SENSOR_UNITS_NEWTON,
461 	TOPO_SENSOR_UNITS_CFM,
462 	TOPO_SENSOR_UNITS_RPM,
463 	TOPO_SENSOR_UNITS_HZ,
464 	TOPO_SENSOR_UNITS_MICROSEC,
465 	TOPO_SENSOR_UNITS_MILLISEC,
466 	TOPO_SENSOR_UNITS_SECS,
467 	TOPO_SENSOR_UNITS_MIN,
468 	TOPO_SENSOR_UNITS_HOUR,
469 	TOPO_SENSOR_UNITS_DAY,
470 	TOPO_SENSOR_UNITS_WEEK,
471 	TOPO_SENSOR_UNITS_MIL,
472 	TOPO_SENSOR_UNITS_INCHES,
473 	TOPO_SENSOR_UNITS_FEET,
474 	TOPO_SENSOR_UNITS_CUB_INCH,
475 	TOPO_SENSOR_UNITS_CUB_FEET,
476 
477 	TOPO_SENSOR_UNITS_MM,
478 	TOPO_SENSOR_UNITS_CM,
479 	TOPO_SENSOR_UNITS_METERS,
480 	TOPO_SENSOR_UNITS_CUB_CM,
481 	TOPO_SENSOR_UNITS_CUB_METER,
482 	TOPO_SENSOR_UNITS_LITERS,
483 	TOPO_SENSOR_UNITS_FLUID_OUNCE,
484 	TOPO_SENSOR_UNITS_RADIANS,
485 	TOPO_SENSOR_UNITS_STERADIANS,
486 	TOPO_SENSOR_UNITS_REVOLUTIONS,
487 	TOPO_SENSOR_UNITS_CYCLES,
488 	TOPO_SENSOR_UNITS_GRAVITIES,
489 	TOPO_SENSOR_UNITS_OUNCE,
490 	TOPO_SENSOR_UNITS_POUND,
491 	TOPO_SENSOR_UNITS_FOOT_POUND,
492 	TOPO_SENSOR_UNITS_OZ_INCH,
493 
494 	TOPO_SENSOR_UNITS_GAUSS,
495 	TOPO_SENSOR_UNITS_GILBERTS,
496 	TOPO_SENSOR_UNITS_HENRY,
497 	TOPO_SENSOR_UNITS_MILHENRY,
498 	TOPO_SENSOR_UNITS_FARAD,
499 	TOPO_SENSOR_UNITS_MICROFARAD,
500 	TOPO_SENSOR_UNITS_OHMS,
501 	TOPO_SENSOR_UNITS_SIEMENS,
502 	TOPO_SENSOR_UNITS_MOLE,
503 	TOPO_SENSOR_UNITS_BECQUEREL,
504 	TOPO_SENSOR_UNITS_PPM,
505 	TOPO_SENSOR_UNITS_RESERVED1,
506 	TOPO_SENSOR_UNITS_DECIBELS,
507 	TOPO_SENSOR_UNITS_DBA,
508 	TOPO_SENSOR_UNITS_DBC,
509 	TOPO_SENSOR_UNITS_GRAY,
510 
511 	TOPO_SENSOR_UNITS_SIEVERT,
512 	TOPO_SENSOR_UNITS_COLOR_TEMP_K,
513 	TOPO_SENSOR_UNITS_BIT,
514 	TOPO_SENSOR_UNITS_KILOBIT,
515 	TOPO_SENSOR_UNITS_MEGABIT,
516 	TOPO_SENSOR_UNITS_GIGABIT,
517 	TOPO_SENSOR_UNITS_BYTE,
518 	TOPO_SENSOR_UNITS_KILOBYTE,
519 	TOPO_SENSOR_UNITS_MEGABYTE,
520 	TOPO_SENSOR_UNITS_GIGABYTE,
521 	TOPO_SENSOR_UNITS_WORD,
522 	TOPO_SENSOR_UNITS_DWORD,
523 	TOPO_SENSOR_UNITS_QWORD,
524 	TOPO_SENSOR_UNITS_MEMLINE,
525 	TOPO_SENSOR_UNITS_HIT,
526 	TOPO_SENSOR_UNITS_MISS,
527 
528 	TOPO_SENSOR_UNITS_RETRY,
529 	TOPO_SENSOR_UNITS_RESET,
530 	TOPO_SENSOR_UNITS_OVERFLOW,
531 	TOPO_SENSOR_UNITS_UNDERRUN,
532 	TOPO_SENSOR_UNITS_COLLISION,
533 	TOPO_SENSOR_UNITS_PACKETS,
534 	TOPO_SENSOR_UNITS_MESSAGES,
535 	TOPO_SENSOR_UNITS_CHARACTERS,
536 	TOPO_SENSOR_UNITS_ERROR,
537 	TOPO_SENSOR_UNITS_CE,
538 	TOPO_SENSOR_UNITS_UE,
539 	TOPO_SENSOR_UNITS_FATAL_ERROR,
540 	TOPO_SENSOR_UNITS_GRAMS
541 } topo_sensor_unit_t;
542 
543 /*
544  * These defines are used by the topo_method_sensor_failure to indicate
545  * whether the source of a sensor failure is believed to be the result of an
546  * internal failure, external condition or unknown
547  */
548 #define	TOPO_SENSOR_ERRSRC_UNKNOWN	0
549 #define	TOPO_SENSOR_ERRSRC_INTERNAL	1
550 #define	TOPO_SENSOR_ERRSRC_EXTERNAL	2
551 
552 /*
553  * Sensor Types amd the associated sensor-type-specific states
554  *
555  * These are used to decode the type and state properties in the facility
556  * propgroup on facility nodes of type sensor.
557  *
558  * Again we're basically using the same defines as for IPMI as it's serves
559  * as a good starting point and simplifies the IPMI provider code.  Of course
560  * other facility providers will need to convert from their native codes
561  * to the topo code when they set the type and state properties.
562  */
563 #define	TOPO_SENSOR_TYPE_RESERVED			0x0000
564 #define	TOPO_SENSOR_TYPE_TEMP				0x0001
565 #define	TOPO_SENSOR_TYPE_VOLTAGE			0x0002
566 #define	TOPO_SENSOR_TYPE_CURRENT			0x0003
567 #define	TOPO_SENSOR_TYPE_FAN				0x0004
568 #define	TOPO_SENSOR_TYPE_PHYSICAL			0x0005
569 
570 #define	TOPO_SENSOR_STATE_PHYSICAL_GENERAL		0x0001
571 #define	TOPO_SENSOR_STATE_PHYSICAL_BAY			0x0002
572 #define	TOPO_SENSOR_STATE_PHYSICAL_CARD			0x0004
573 #define	TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR		0x0008
574 #define	TOPO_SENSOR_STATE_PHYSICAL_LAN			0x0010
575 #define	TOPO_SENSOR_STATE_PHYSICAL_DOCK			0x0020
576 #define	TOPO_SENSOR_STATE_PHYSICAL_FAN			0x0040
577 
578 #define	TOPO_SENSOR_TYPE_PLATFORM			0x0006
579 
580 #define	TOPO_SENSOR_STATE_PLATFORM_SECURE		0x0001
581 #define	TOPO_SENSOR_STATE_PLATFORM_USER_PASS		0x0002
582 #define	TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS		0x0004
583 #define	TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS		0x0008
584 #define	TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS		0x0010
585 #define	TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND		0x0020
586 
587 #define	TOPO_SENSOR_TYPE_PROCESSOR			0x0007
588 
589 #define	TOPO_SENSOR_STATE_PROCESSOR_IERR		0x0001
590 #define	TOPO_SENSOR_STATE_PROCESSOR_THERMAL		0x0002
591 #define	TOPO_SENSOR_STATE_PROCESSOR_FRB1		0x0004
592 #define	TOPO_SENSOR_STATE_PROCESSOR_FRB2		0x0008
593 #define	TOPO_SENSOR_STATE_PROCESSOR_FRB3		0x0010
594 #define	TOPO_SENSOR_STATE_PROCESSOR_CONFIG		0x0020
595 #define	TOPO_SENSOR_STATE_PROCESSOR_SMBIOS		0x0040
596 #define	TOPO_SENSOR_STATE_PROCESSOR_PRESENT		0x0080
597 #define	TOPO_SENSOR_STATE_PROCESSOR_DISABLED		0x0100
598 #define	TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR		0x0200
599 #define	TOPO_SENSOR_STATE_PROCESSOR_THROTTLED		0x0400
600 
601 #define	TOPO_SENSOR_TYPE_POWER_SUPPLY			0x0008
602 
603 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT		0x0001
604 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE		0x0002
605 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL		0x0004
606 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST	0x0008
607 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE	0x0010
608 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES	0x0020
609 #define	TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR	0x0040
610 
611 #define	TOPO_SENSOR_TYPE_POWER_UNIT			0x0009
612 
613 #define	TOPO_SENSOR_STATE_POWER_UNIT_OFF		0x0001
614 #define	TOPO_SENSOR_STATE_POWER_UNIT_CYCLE		0x0002
615 #define	TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN		0x0004
616 #define	TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN	0x0008
617 #define	TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST		0x0010
618 #define	TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE	0x0020
619 #define	TOPO_SENSOR_STATE_POWER_UNIT_FAIL		0x0040
620 #define	TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL		0x0080
621 
622 #define	TOPO_SENSOR_TYPE_COOLING			0x000A
623 #define	TOPO_SENSOR_TYPE_OTHER				0x000B
624 
625 #define	TOPO_SENSOR_TYPE_MEMORY				0x000C
626 
627 #define	TOPO_SENSOR_STATE_MEMORY_CE			0x0001
628 #define	TOPO_SENSOR_STATE_MEMORY_UE			0x0002
629 #define	TOPO_SENSOR_STATE_MEMORY_PARITY			0x0004
630 #define	TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL		0x0008
631 #define	TOPO_SENSOR_STATE_MEMORY_DISABLED		0x0010
632 #define	TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT		0x0020
633 #define	TOPO_SENSOR_STATE_MEMORY_PRESENT		0x0040
634 #define	TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR		0x0080
635 #define	TOPO_SENSOR_STATE_MEMORY_SPARE			0x0100
636 #define	TOPO_SENSOR_STATE_MEMORY_THROTTLED		0x0200
637 #define	TOPO_SENSOR_STATE_MEMORY_OVERTEMP		0x0400
638 
639 #define	TOPO_SENSOR_TYPE_BAY				0x000D
640 
641 #define	TOPO_SENSOR_STATE_BAY_PRESENT			0x0001
642 #define	TOPO_SENSOR_STATE_BAY_FAULT			0x0002
643 #define	TOPO_SENSOR_STATE_BAY_PREDFAIL			0x0004
644 #define	TOPO_SENSOR_STATE_BAY_SPARE			0x0008
645 #define	TOPO_SENSOR_STATE_BAY_CHECK			0x0010
646 #define	TOPO_SENSOR_STATE_BAY_CRITICAL			0x0020
647 #define	TOPO_SENSOR_STATE_BAY_FAILED			0x0040
648 #define	TOPO_SENSOR_STATE_BAY_REBUILDING		0x0080
649 #define	TOPO_SENSOR_STATE_BAY_ABORTED			0x0100
650 
651 #define	TOPO_SENSOR_TYPE_POST_RESIZE			0x000E
652 
653 #define	TOPO_SENSOR_TYPE_FIRMWARE			0x000F
654 
655 #define	TOPO_SENSOR_STATE_FIRMWARE_ERROR		0x0001
656 #define	TOPO_SENSOR_STATE_FIRMWARE_HANG			0x0002
657 #define	TOPO_SENSOR_STATE_FIRMWARE_PROGRESS		0x0004
658 
659 #define	TOPO_SENSOR_TYPE_EVENT_LOG			0x0010
660 
661 #define	TOPO_SENSOR_STATE_EVENT_LOG_CE			0x0001
662 #define	TOPO_SENSOR_STATE_EVENT_LOG_TYPE		0x0002
663 #define	TOPO_SENSOR_STATE_EVENT_LOG_RESET		0x0004
664 #define	TOPO_SENSOR_STATE_EVENT_LOG_ALL			0x0008
665 #define	TOPO_SENSOR_STATE_EVENT_LOG_FULL		0x0010
666 #define	TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL		0x0020
667 
668 #define	TOPO_SENSOR_TYPE_WATCHDOG1			0x0011
669 
670 #define	TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET		0x0001
671 #define	TOPO_SENSOR_STATE_WATCHDOG_OS_RESET		0x0002
672 #define	TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN		0x0004
673 #define	TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN		0x0008
674 #define	TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE		0x0010
675 #define	TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG		0x0020
676 #define	TOPO_SENSOR_STATE_WATCHDOG_EXPIRED		0x0040
677 #define	TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT	0x0080
678 
679 #define	TOPO_SENSOR_TYPE_SYSTEM				0x0012
680 
681 #define	TOPO_SENSOR_STATE_SYSTEM_RECONF			0x0001
682 #define	TOPO_SENSOR_STATE_SYSTEM_BOOT			0x0002
683 #define	TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE	0x0004
684 #define	TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED	0x0008
685 #define	TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION		0x0010
686 #define	TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC	0x0020
687 
688 #define	TOPO_SENSOR_TYPE_CRITICAL			0x0013
689 
690 #define	TOPO_SENSOR_STATE_CRITICAL_EXT_NMI		0x0001
691 #define	TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT		0x0002
692 #define	TOPO_SENSOR_STATE_CRITICAL_IO_NMI		0x0004
693 #define	TOPO_SENSOR_STATE_CRITICAL_SW_NMI		0x0008
694 #define	TOPO_SENSOR_STATE_CRITICAL_PCI_PERR		0x0010
695 #define	TOPO_SENSOR_STATE_CRITICAL_PCI_SERR		0x0020
696 #define	TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE	0x0040
697 #define	TOPO_SENSOR_STATE_CRITICAL_BUS_CE		0x0080
698 #define	TOPO_SENSOR_STATE_CRITICAL_BUS_UE		0x0100
699 #define	TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI		0x0200
700 #define	TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR	0x0400
701 #define	TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED		0x0800
702 
703 #define	TOPO_SENSOR_TYPE_BUTTON				0x0014
704 
705 #define	TOPO_SENSOR_STATE_BUTTON_PWR			0x0001
706 #define	TOPO_SENSOR_STATE_BUTTON_SLEEP			0x0002
707 #define	TOPO_SENSOR_STATE_BUTTON_RESET			0x0004
708 #define	TOPO_SENSOR_STATE_BUTTON_FRU_LATCH		0x0008
709 #define	TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE		0x0010
710 
711 #define	TOPO_SENSOR_TYPE_MODULE				0x0015
712 #define	TOPO_SENSOR_TYPE_MICROCONTROLLER		0x0016
713 #define	TOPO_SENSOR_TYPE_CARD				0x0017
714 #define	TOPO_SENSOR_TYPE_CHASSIS			0x0018
715 
716 #define	TOPO_SENSOR_TYPE_CHIPSET			0x0019
717 
718 #define	TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL		0x0001
719 
720 #define	TOPO_SENSOR_TYPE_FRU				0x001A
721 
722 #define	TOPO_SENSOR_TYPE_CABLE				0x001B
723 
724 #define	TOPO_SENSOR_STATE_CABLE_CONNECTED		0x0001
725 #define	TOPO_SENSOR_STATE_CABLE_CONFIG_ERR		0x0002
726 
727 #define	TOPO_SENSOR_TYPE_TERMINATOR			0x001C
728 
729 #define	TOPO_SENSOR_TYPE_BOOT_STATE			0x001D
730 
731 #define	TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP	0x0001
732 #define	TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET	0x0002
733 #define	TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET	0x0004
734 #define	TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT		0x0008
735 #define	TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT		0x0010
736 #define	TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET	0x0020
737 #define	TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET	0x0040
738 #define	TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART	0x0080
739 
740 #define	TOPO_SENSOR_TYPE_BOOT_ERROR			0x001E
741 
742 #define	TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA		0x0001
743 #define	TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK	0x0002
744 #define	TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER	0x0004
745 #define	TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT	0x0008
746 #define	TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT	0x0010
747 
748 #define	TOPO_SENSOR_TYPE_BOOT_OS			0x001F
749 
750 #define	TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE	0x0001
751 #define	TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE	0x0002
752 #define	TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE	0x0004
753 #define	TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE	0x0008
754 #define	TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE	0x0010
755 #define	TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE	0x0020
756 #define	TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE	0x0040
757 
758 #define	TOPO_SENSOR_TYPE_OS_SHUTDOWN			0x0020
759 
760 #define	TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING		0x0001
761 #define	TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH		0x0002
762 #define	TOPO_SENSOR_STATE_OS_STOP_GRACEFUL		0x0004
763 #define	TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL		0x0008
764 #define	TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF		0x0010
765 #define	TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC		0x0020
766 
767 #define	TOPO_SENSOR_TYPE_SLOT				0x0021
768 
769 #define	TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED		0x0001
770 #define	TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED	0x0002
771 #define	TOPO_SENSOR_STATE_SLOT_CONNECTED		0x0004
772 #define	TOPO_SENSOR_STATE_SLOT_INSTALL_READY		0x0008
773 #define	TOPO_SENSOR_STATE_SLOT_REMOVE_READY		0x0010
774 #define	TOPO_SENSOR_STATE_SLOT_PWR_OFF			0x0020
775 #define	TOPO_SENSOR_STATE_SLOT_REMOVED			0x0040
776 #define	TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED	0x0080
777 #define	TOPO_SENSOR_STATE_SLOT_DISABLED			0x0100
778 #define	TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE		0x0200
779 
780 #define	TOPO_SENSOR_TYPE_ACPI				0x0022
781 
782 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0		0x0001
783 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S1		0x0002
784 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S2		0x0004
785 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S3		0x0008
786 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S4		0x0010
787 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF	0x0020
788 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF	0x0040
789 #define	TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF	0x0080
790 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP	0x0100
791 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP		0x0200
792 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE	0x0400
793 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON		0x0800
794 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF	0x1000
795 #define	TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN		0x2000
796 
797 #define	TOPO_SENSOR_TYPE_WATCHDOG2			0x0023
798 
799 #define	TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED		0x0001
800 #define	TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET		0x0002
801 #define	TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN		0x0004
802 #define	TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE		0x0008
803 #define	TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1		0x0010
804 #define	TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2		0x0020
805 #define	TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3		0x0040
806 #define	TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4		0x0080
807 #define	TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT		0x0100
808 
809 #define	TOPO_SENSOR_TYPE_ALERT				0x0024
810 
811 #define	TOPO_SENSOR_STATE_ALERT_PLAT_PAGE		0x0001
812 #define	TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT		0x0002
813 #define	TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP		0x0004
814 #define	TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP		0x0008
815 
816 #define	TOPO_SENSOR_TYPE_PRESENCE			0x0025
817 
818 #define	TOPO_SENSOR_STATE_PRESENCE_PRESENT		0x0001
819 #define	TOPO_SENSOR_STATE_PRESENCE_ABSENT		0x0002
820 #define	TOPO_SENSOR_STATE_PRESENCE_DISABLED		0x0004
821 
822 #define	TOPO_SENSOR_TYPE_ASIC				0x0026
823 
824 #define	TOPO_SENSOR_TYPE_LAN				0x0027
825 
826 #define	TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST		0x0001
827 #define	TOPO_SENSOR_STATE_LAN_HEARTBEAT			0x0002
828 
829 #define	TOPO_SENSOR_TYPE_HEALTH				0x0028
830 
831 #define	TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED	0x0001
832 #define	TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED	0x0002
833 #define	TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE		0x0004
834 #define	TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL		0x0008
835 #define	TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE		0x0010
836 #define	TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE		0x0020
837 
838 #define	TOPO_SENSOR_TYPE_BATTERY			0x0029
839 
840 #define	TOPO_SENSOR_STATE_BATTERY_LOW			0x0001
841 #define	TOPO_SENSOR_STATE_BATTERY_FAILED		0x0002
842 #define	TOPO_SENSOR_STATE_BATTERY_PRESENCE		0x0004
843 
844 #define	TOPO_SENSOR_TYPE_AUDIT				0x002A
845 
846 #define	TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED	0x0001
847 #define	TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED	0x0002
848 
849 #define	TOPO_SENSOR_TYPE_VERSION			0x002B
850 
851 #define	TOPO_SENSOR_STATE_VERSION_HW_CHANGE		0x0001
852 #define	TOPO_SENSOR_STATE_VERSION_SW_CHANGE		0x0002
853 #define	TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE	0x0004
854 #define	TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE	0x0008
855 #define	TOPO_SENSOR_STATE_VERSION_HW_INVAL		0x0010
856 #define	TOPO_SENSOR_STATE_VERSION_SW_INVAL		0x0020
857 #define	TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS	0x0040
858 #define	TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS	0x0080
859 
860 #define	TOPO_SENSOR_TYPE_FRU_STATE			0x002C
861 
862 #define	TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED	0x0001
863 #define	TOPO_SENSOR_STATE_FRU_STATE_INACTIVE		0x0002
864 #define	TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ		0x0004
865 #define	TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS	0x0008
866 #define	TOPO_SENSOR_STATE_FRU_STATE_ACTIVE		0x0010
867 #define	TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ		0x0020
868 #define	TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS	0x0040
869 #define	TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST		0x0080
870 
871 /*
872  * We simplify the IPMI sensor type code defines by combining the generic
873  * and sensor-specific codes into a single range.  Because there's overlap
874  * between the two ranges we offset the generic type codes by 0x0100
875  * which allows ample room in the hole for future expansion of the table to
876  * accomodate either additions to the IPMI spec or to support new sensor types
877  * for alternate provider modules.
878  */
879 #define	TOPO_SENSOR_TYPE_THRESHOLD_STATE		0x0101
880 
881 #define	TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT		0x0001
882 #define	TOPO_SENSOR_STATE_THRESH_LOWER_CRIT		0x0002
883 #define	TOPO_SENSOR_STATE_THRESH_LOWER_NONREC		0x0004
884 #define	TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT		0x0008
885 #define	TOPO_SENSOR_STATE_THRESH_UPPER_CRIT		0x0010
886 #define	TOPO_SENSOR_STATE_THRESH_UPPER_NONREC		0x0020
887 
888 #define	TOPO_SENSOR_TYPE_GENERIC_USAGE			0x0102
889 
890 #define	TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE		0x0001
891 #define	TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE		0x0002
892 #define	TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY		0x0004
893 
894 #define	TOPO_SENSOR_TYPE_GENERIC_STATE			0x0103
895 
896 #define	TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED	0x0001
897 #define	TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED	0x0002
898 
899 #define	TOPO_SENSOR_TYPE_GENERIC_PREDFAIL		0x0104
900 
901 #define	TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED	0x0001
902 #define	TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED	0x0002
903 
904 #define	TOPO_SENSOR_TYPE_GENERIC_LIMIT			0x0105
905 
906 #define	TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED	0x0001
907 #define	TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED	0x0002
908 
909 #define	TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE		0x0106
910 
911 #define	TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET	0x0001
912 #define	TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS	0x0002
913 
914 #define	TOPO_SENSOR_TYPE_SEVERITY			0x0107
915 
916 #define	TOPO_SENSOR_STATE_SEVERITY_OK			0x0001
917 #define	TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH	0x0002
918 #define	TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH	0x0004
919 #define	TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH	0x0008
920 #define	TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW	0x0010
921 #define	TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW	0x0020
922 #define	TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW	0x0020
923 #define	TOPO_SENSOR_STATE_SEVERITY_MONITOR		0x0040
924 #define	TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL	0x0080
925 
926 #define	TOPO_SENSOR_TYPE_GENERIC_PRESENCE		0x0108
927 
928 #define	TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED	0x0001
929 #define	TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED	0x0002
930 
931 #define	TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY		0x0109
932 
933 #define	TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED	0x0001
934 #define	TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED	0x0002
935 
936 #define	TOPO_SENSOR_TYPE_GENERIC_STATUS			0x010A
937 
938 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING	0x0001
939 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST	0x0002
940 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF	0x0004
941 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE		0x0008
942 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE	0x0010
943 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY	0x0020
944 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED	0x0040
945 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE	0x0080
946 #define	TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR	0x0100
947 
948 #define	TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY		0x010B
949 
950 /*
951  * ACPI power state
952  */
953 #define	TOPO_SENSOR_TYPE_GENERIC_ACPI			0x010C
954 
955 #define	TOPO_SENSOR_STATE_GENERIC_ACPI_D0		0x0001
956 #define	TOPO_SENSOR_STATE_GENERIC_ACPI_D1		0x0002
957 #define	TOPO_SENSOR_STATE_GENERIC_ACPI_D2		0x0004
958 #define	TOPO_SENSOR_STATE_GENERIC_ACPI_D3		0x0008
959 
960 /*
961  * These sensor types don't exist in the IPMI spec, but allow consumers to
962  * associate discrete sensors with component failure.  The 'ok' sensor is the
963  * inverse of the 'failure' sensor.  Note that the values intentionally mimic
964  * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors
965  * but just change the type to get semantically meaningful behavior.
966  */
967 #define	TOPO_SENSOR_TYPE_GENERIC_FAILURE		0x010D
968 
969 #define	TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED	0x0001
970 #define	TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV		0x0002
971 #define	TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL		0x0004
972 
973 #define	TOPO_SENSOR_TYPE_GENERIC_OK			0x010E
974 
975 #define	TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED		0x0001
976 #define	TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED		0x0002
977 
978 /*
979  * Indicator modes and types
980  */
981 typedef enum topo_led_state {
982 	TOPO_LED_STATE_OFF = 0,
983 	TOPO_LED_STATE_ON
984 } topo_led_state_t;
985 
986 #define	TOPO_FAC_TYPE_ANY	0xFFFFFFFF
987 
988 /*
989  * This list is limited to the set of LED's that we're likely to manage through
990  * FMA.  Thus is does not include things like power or activity LED's
991  */
992 typedef enum topo_led_type {
993 	TOPO_LED_TYPE_SERVICE = 0,
994 	TOPO_LED_TYPE_LOCATE,
995 	TOPO_LED_TYPE_OK2RM,
996 	TOPO_LED_TYPE_PRESENT
997 } topo_led_type_t;
998 
999 
1000 #ifdef __cplusplus
1001 }
1002 #endif
1003 
1004 #endif /* _LIBTOPO_H */
1005