| /linux/drivers/net/ethernet/freescale/fman/ |
| H A D | fman_port.c | 430 u16 port_speed; member
844 if (port->port_speed == 10000) in verify_size_of_fifo()
871 if (port->port_speed == 10000) in verify_size_of_fifo()
1222 BMI_DEQUEUE_PIPELINE_DEPTH(port->port_type, port->port_speed); in set_dflt_cfg()
1270 port->port_speed); in set_tx_dflt_cfg()
1306 port->port_speed = port->dts_params.speed; in fman_port_config()
1340 port->port_speed) * FMAN_BMI_FIFO_UNITS; in fman_port_config()
1346 port->port_type, port->port_speed); in fman_port_config()
1349 port->port_type, port->port_speed); in fman_port_config()
1352 port->port_type, port->port_speed); in fman_port_config()
[all …]
|
| /linux/drivers/net/dsa/sja1105/ |
| H A D | sja1105_spi.c | 592 .port_speed = {
624 .port_speed = {
657 .port_speed = {
690 .port_speed = {
725 .port_speed = {
761 .port_speed = {
800 .port_speed = {
851 .port_speed = {
902 .port_speed = {
953 .port_speed = {
|
| H A D | sja1105_clocking.c | 349 if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { in sja1105_cgu_rgmii_tx_clk_config()
600 if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { in sja1105_rgmii_clocking_setup()
603 } else if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) { in sja1105_rgmii_clocking_setup()
606 } else if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) { in sja1105_rgmii_clocking_setup()
609 } else if (speed == priv->info->port_speed[SJA1105_SPEED_AUTO]) { in sja1105_rgmii_clocking_setup()
|
| /linux/drivers/scsi/be2iscsi/ |
| H A D | be_iscsi.c | 723 switch (phba->port_speed) { in beiscsi_get_port_speed()
725 ihost->port_speed = ISCSI_PORT_SPEED_10MBPS; in beiscsi_get_port_speed()
728 ihost->port_speed = ISCSI_PORT_SPEED_100MBPS; in beiscsi_get_port_speed()
731 ihost->port_speed = ISCSI_PORT_SPEED_1GBPS; in beiscsi_get_port_speed()
734 ihost->port_speed = ISCSI_PORT_SPEED_10GBPS; in beiscsi_get_port_speed()
737 ihost->port_speed = ISCSI_PORT_SPEED_25GBPS; in beiscsi_get_port_speed()
740 ihost->port_speed = ISCSI_PORT_SPEED_40GBPS; in beiscsi_get_port_speed()
743 ihost->port_speed = ISCSI_PORT_SPEED_UNKNOWN; in beiscsi_get_port_speed()
|
| H A D | be_main.h | 363 u8 port_speed; member
|
| H A D | be_cmds.c | 369 phba->port_speed = evt->port_speed; in beiscsi_process_async_link()
|
| H A D | be_cmds.h | 171 u8 port_speed; member
|
| /linux/drivers/net/ethernet/mellanox/mlxsw/ |
| H A D | spectrum_ptp.c | 908 enum mlxsw_reg_qpsc_port_speed port_speed; member
922 .port_speed = MLXSW_REG_QPSC_PORT_SPEED_100M,
933 .port_speed = MLXSW_REG_QPSC_PORT_SPEED_1G,
944 .port_speed = MLXSW_REG_QPSC_PORT_SPEED_10G,
955 .port_speed = MLXSW_REG_QPSC_PORT_SPEED_25G,
976 mlxsw_reg_qpsc_pack(qpsc_pl, params->port_speed, in mlxsw_sp1_ptp_shaper_params_set()
|
| /linux/drivers/scsi/snic/ |
| H A D | vnic_devcmd.h | 184 u32 port_speed; /* effective port speed (rate limit) */ member
|
| /linux/drivers/scsi/lpfc/ |
| H A D | lpfc_init.c | 5335 uint32_t port_speed; in lpfc_sli4_port_speed_parse() local
5341 port_speed = 0; in lpfc_sli4_port_speed_parse()
5344 port_speed = 10; in lpfc_sli4_port_speed_parse()
5347 port_speed = 100; in lpfc_sli4_port_speed_parse()
5350 port_speed = 1000; in lpfc_sli4_port_speed_parse()
5353 port_speed = 10000; in lpfc_sli4_port_speed_parse()
5356 port_speed = 20000; in lpfc_sli4_port_speed_parse()
5359 port_speed = 25000; in lpfc_sli4_port_speed_parse()
5362 port_speed = 40000; in lpfc_sli4_port_speed_parse()
5365 port_speed = 100000; in lpfc_sli4_port_speed_parse()
[all …]
|
| H A D | lpfc_bsg.h | 384 uint16_t port_speed; member
|
| H A D | lpfc_bsg.c | 5588 event_reply->port_speed = phba->sli4_hba.link_state.speed / 1000; in lpfc_get_trunk_info()
|
| /linux/drivers/net/ethernet/cisco/enic/ |
| H A D | vnic_devcmd.h | 540 u32 port_speed; /* effective port speed (rate limit) */ member
|
| /linux/drivers/net/ethernet/huawei/hinic/ |
| H A D | hinic_hw_dev.h | 400 u32 port_speed; member
|
| /linux/drivers/usb/host/ |
| H A D | octeon-hcd.c | 157 enum cvmx_usb_speed port_speed : 2; member
1025 result.port_speed = usbc_hprt.s.prtspd; in cvmx_usb_get_status()
3454 if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) { in octeon_usb_hub_control()
3457 } else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) { in octeon_usb_hub_control()
|
| /linux/drivers/scsi/bfa/ |
| H A D | bfa_fcs_lport.c | 5688 bfa_port_speed_t port_speed, rport_speed; in bfa_fcs_lport_get_rport_max_speed() local
5699 port_speed = port_attr.speed; in bfa_fcs_lport_get_rport_max_speed()
5700 bfa_trc(fcs, port_speed); in bfa_fcs_lport_get_rport_max_speed()
5728 if (max_speed > port_speed) in bfa_fcs_lport_get_rport_max_speed()
5729 max_speed = port_speed; in bfa_fcs_lport_get_rport_max_speed()
|
| H A D | bfad_bsg.c | 2231 pbcfg->speed = cfgrsp->pbc_cfg.port_speed; in bfad_iocmd_preboot_query()
|
| /linux/drivers/scsi/ |
| H A D | scsi_transport_iscsi.c | 4670 iscsi_host_attr(port_speed, ISCSI_HOST_PARAM_PORT_SPEED);
4734 uint32_t port_speed = ihost->port_speed; in iscsi_get_port_speed_name() local
4737 if (iscsi_port_speed_names[i].value & port_speed) { in iscsi_get_port_speed_name()
|
| H A D | scsi_transport_fc.c | 270 fc_bitfield_name_search(port_speed, fc_port_speed_names) in fc_bitfield_name_search() argument
|
| /linux/drivers/scsi/elx/libefc_sli/ |
| H A D | sli4.c | 2502 link_attn->topology, link_attn->port_speed, in sli_fc_process_link_attention()
2561 event.speed = link_attn->port_speed * 1000; in sli_fc_process_link_attention()
|
| H A D | sli4.h | 946 u8 port_speed; member
|
| /linux/drivers/scsi/qla4xxx/ |
| H A D | ql4_os.c | 1918 ihost->port_speed = speed; in qla4xxx_set_port_speed()
|