| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | qcom,rpmh-regulator.txt | 11 switches, and LDO/SMPS regulators which have a fixed voltage and mode.
17 RPMh regulators must be described in two levels of device nodes. The first
18 level describes the PMIC containing the regulators and must reside within an
20 which is to be used on the board. Each of these regulators maps to a single
45 "qcom,pm8005-rpmh-regulators"
46 "qcom,pm8009-rpmh-regulators"
47 "qcom,pm8009-1-rpmh-regulators"
48 "qcom,pm8150-rpmh-regulators"
49 "qcom,pm8150l-rpmh-regulators"
50 "qcom,pm8350-rpmh-regulators"
[all …]
|
| H A D | tps65217.txt | 1 TPS65217 family of regulators
6 - regulators: list of regulators provided by this controller, must be named
8 - regulators: This is the list of child nodes that specify the regulator
9 initialization data for defined regulators. Not all regulators for the given
11 using the standard binding for regulators found at
17 The valid names for regulators are:
20 Each regulator is defined using the standard binding for regulators.
28 regulators {
|
| H A D | tps65023.txt | 1 TPS65023 family of regulators
9 - regulators: list of regulators provided by this controller, must be named
11 - regulators: This is the list of child nodes that specify the regulator
12 initialization data for defined regulators. The definition for each of
13 these nodes is defined using the standard binding for regulators found at
16 Each regulator is defined using the standard binding for regulators.
24 regulators {
|
| H A D | qcom,spmi-regulator.txt | 7 "qcom,pm8004-regulators"
8 "qcom,pm8005-regulators"
9 "qcom,pm8226-regulators"
10 "qcom,pm8841-regulators"
11 "qcom,pm8916-regulators"
12 "qcom,pm8941-regulators"
13 "qcom,pm8950-regulators"
14 "qcom,pm8994-regulators"
15 "qcom,pmi8994-regulators"
16 "qcom,pm660-regulators"
[all …]
|
| H A D | mt6311-regulator.txt | 6 - regulators: List of regulators provided by this controller. It is named
9 for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
11 The valid names for regulators are:
22 regulators {
|
| H A D | tps65218.txt | 1 TPS65218 family of regulators
7 - List of regulators provided by this controller, must be named
10 initialization data for defined regulators. Not all regulators for the given
12 using the standard binding for regulators found at ./regulator.txt.
14 The valid names for regulators are:
17 Each regulator is defined using the standard binding for regulators.
|
| H A D | da9211.txt | 9 - regulators: A node that houses a sub-node for each regulator within the
12 standard binding for regulators; see regulator.txt.
27 regulators {
47 regulators {
73 regulators {
91 regulators {
109 regulators {
135 regulators {
161 regulators {
187 regulators {
|
| H A D | slg51000.txt | 7 These entries are required if regulators are enabled for a device.
24 - regulators : This node defines the settings for the regulators.
26 for regulators; see regulator.txt.
28 The SLG51000 regulators are bound using their names listed below:
37 Optional properties for regulators:
45 regulators {
|
| H A D | max77802.txt | 1 Binding for Maxim MAX77802 regulators
7 regulators that can be controlled over I2C.
33 - regulators : The regulators of max77802 have to be instantiated
34 under subnode named "regulators" using the following format.
51 Power Mode. Some regulators support the modes to be changed at startup or by
56 The regulators that support the standard "regulator-initial-mode" property,
66 The standard "regulator-mode" property can only be used for regulators that
67 support changing their mode to Low Power Mode during suspend. These regulators
84 regulators {
|
| H A D | sprd,sc2731-regulator.txt | 1 Spreadtrum SC2731 Voltage regulators
11 List of regulators provided by this controller. It is named according to
13 of these nodes is defined using the standard binding for regulators at
16 The valid names for regulators are:
25 regulators {
|
| H A D | pfuze100.txt | 1 PFUZE100 family of regulators
9 regulators to save power consumption. Attention, ensure that all important
10 regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
11 property. If not present, the switched regulators are always on and can't be
13 old dtb's which rely on the fact that the switched regulators are always on
22 - regulators: This is the list of child nodes that specify the regulator
23 initialization data for defined regulators. Please refer to below doc
26 The valid names for regulators are:
36 Each regulator is defined using the standard binding for regulators.
44 regulators {
[all …]
|
| H A D | max77686.txt | 1 Binding for Maxim MAX77686 regulators
7 regulators that can be controlled over I2C.
12 - voltage-regulators : The regulators of max77686 have to be instantiated
13 under subnode named "voltage-regulators" using the following format.
49 voltage-regulators {
|
| H A D | qcom,smd-rpm-regulator.txt | 22 "qcom,rpm-pm8841-regulators"
23 "qcom,rpm-pm8916-regulators"
24 "qcom,rpm-pm8941-regulators"
25 "qcom,rpm-pm8950-regulators"
26 "qcom,rpm-pm8994-regulators"
27 "qcom,rpm-pm8998-regulators"
28 "qcom,rpm-pma8084-regulators"
29 "qcom,rpm-pmi8994-regulators"
30 "qcom,rpm-pmi8998-regulators"
31 "qcom,rpm-pms405-regulators"
[all …]
|
| H A D | as3722-regulator.txt | 2 Name of the regulator subnode must be "regulators".
6 The input supply of regulators are the optional properties on the
7 regulator node. The AS3722 is having 7 DCDC step-down regulators as
9 regulators are provided through following properties:
23 - regulators : Must contain a sub-node per regulator from the list below.
49 regulators {
|
| H A D | 88pm800.txt | 6 - regulators: A node that houses a sub-node for each regulator within the
10 regulators; see regulator.txt.
12 The valid names for regulators are:
23 regulators {
|
| H A D | nvidia,tegra-regulators-coupling.txt | 4 NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators.
5 Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30
11 On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU.
18 On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE
34 regulators {
|
| H A D | mt6380-regulator.txt | 3 All voltage regulators provided by the MT6380 PMIC are described as the
4 subnodes of the MT6380 regulators node. Each regulator is named according
6 of these nodes is defined using the standard binding for regulators at
9 The valid names for regulators are:
17 regulators {
|
| H A D | twl-regulator.txt | 1 TWL family of regulators
4 For twl6030 regulators/LDOs
21 For twl6032 regulators/LDOs
35 For twl4030 regulators/LDOs
60 For twl4030 regulators/LDOs:
75 For twl6030 regulators/LDOs:
|
| H A D | samsung,s2mpa01.txt | 7 The S2MPA01 device provide buck and LDO regulators.
10 a sub-node named "regulators" with more sub-nodes for each regulator using the
15 Names of regulators supported by S2MPA01 device:
26 Optional properties of buck regulator nodes under "regulators" sub-node:
48 regulators {
|
| /freebsd/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | tps6507x.txt | 6 - regulators: This is the list of child nodes that specify the regulator
7 initialization data for defined regulators. Not all regulators for the
9 is defined using the standard binding for regulators found at
16 These entries are required if regulators are enabled for a device.
28 - defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
43 regulators {
|
| H A D | lp87565.txt | 11 populated under regulators node. xxx should match
24 regulators: regulators {
57 populated under regulators node. xxx should match
69 regulators: regulators {
|
| H A D | max77802.txt | 4 efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
7 regulators, clocks outputs and the RTC.
10 regulators are defined in ../clk/maxim,max77802.txt and
|
| /freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
| H A D | sm8550-samsung-q5q.dts | 109 regulators-0 {
110 compatible = "qcom,pm8550-rpmh-regulators";
230 regulators-1 {
231 compatible = "qcom,pm8550vs-rpmh-regulators";
242 regulators-2 {
243 compatible = "qcom,pm8550vs-rpmh-regulators";
254 regulators-3 {
255 compatible = "qcom,pm8550vs-rpmh-regulators";
294 regulators-4 {
295 compatible = "qcom,pm8550ve-rpmh-regulators";
[all …]
|
| H A D | qcs8550-aim300.dtsi | 16 regulators-0 {
17 compatible = "qcom,pm8550-rpmh-regulators";
144 regulators-1 {
145 compatible = "qcom,pm8550vs-rpmh-regulators";
160 regulators-2 {
161 compatible = "qcom,pm8550vs-rpmh-regulators";
176 regulators-3 {
177 compatible = "qcom,pm8550vs-rpmh-regulators";
220 regulators-4 {
221 compatible = "qcom,pm8550ve-rpmh-regulators";
[all …]
|
| H A D | x1e80100-asus-vivobook-s15.dts | 143 regulators-0 {
144 compatible = "qcom,pm8550-rpmh-regulators";
187 regulators-1 {
188 compatible = "qcom,pm8550ve-rpmh-regulators";
204 regulators-2 {
205 compatible = "qcom,pmc8380-rpmh-regulators";
235 regulators-3 {
236 compatible = "qcom,pmc8380-rpmh-regulators";
257 regulators-4 {
258 compatible = "qcom,pmc8380-rpmh-regulators";
[all …]
|