Searched refs:WiFi (Results 1 – 25 of 143) sorted by relevance
123456
73 product BROADCOM 43241 0x4324 BCM43241 fullmac SDIO WiFi74 product BROADCOM 4329 0x4329 BCM4329 fullmac SDIO WiFi75 product BROADCOM 4330 0x4330 BCM4330 fullmac SDIO WiFi76 product BROADCOM 4334 0x4334 BCM4334 fullmac SDIO WiFi77 product BROADCOM 4335_4339 0x4335 BCM4335_4339 fullmac SDIO WiFi78 product BROADCOM 4339 0x4339 BCM4339 fullmac SDIO WiFi79 product BROADCOM 4345 0x4345 BCM4345 fullmac SDIO WiFi80 product BROADCOM 4354 0x4354 BCM4354 fullmac SDIO WiFi81 product BROADCOM 4356 0x4356 BCM4356 fullmac SDIO WiFi82 product BROADCOM 4359 0x4359 BCM4359 fullmac SDIO WiFi[all …]
4 block and a BT, WiFi and FM radio block, all using SMD as command channels.15 communication with the WiFi firmware.52 == WiFi53 The following properties are defined to the WiFi node:83 "pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
3 * Samsung's Exynos5420 Klimt WiFi board device tree source14 model = "Samsung Klimt WiFi based on Exynos5420";
3 * Samsung's Exynos5420 Chagall WiFi board device tree source14 model = "Samsung Chagall WiFi based on Exynos5420";
13 * Disabled: WiFi and BT17 * To use usdhc1 as SD card, the WiFi node must be deleted. The associated
54 /* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */61 /* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */328 /* WiFi on LGA */
45 /* WiFi pin WL_REG_ON is connected to GPIO 5.9 */192 /* WiFi on LGA */
41 /* Regulator for WiFi */281 /* wl1271 WiFi */284 /* EMU1.gpio3_8 - WiFi IRQ */286 /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */503 /* WLS1271 WiFi */
72 gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */121 /* WiFi/BT combo */177 /* optional on board WiFi */
187 /* on-board bluetooth / WiFi module */220 /* on-board WiFi module */
69 * WiFi options:113 regulator-name = "WiFi Power";159 /* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
23 /* SDIO WiFi RTL8821CS */
68 /* Always on 3.3V regulator for WiFi and BT */78 /* Always on 1.8V/300mA regulator for WiFi and BT IO */
395 /* enable if WiFi/BT board connected */410 /* WiFi firmware requires power in suspend */472 /* enable if WiFi/BT board connected */
288 /* on-module SDIO WiFi */303 /* WiFi firmware requires power in suspend */
69 label = "WiFi";
76 label = "WiFi";
73 label = "WiFi";
87 label = "WiFi";
83 label = "WiFi";
81 label = "WiFi";
63 label = "WiFi";
34 /* WiFi */
22 label = "WiFi";