1 /*-
2 * SPDX-License-Identifier: BSD-4-Clause
3 *
4 * Copyright (c) 1992, University of Vermont and State Agricultural College.
5 * Copyright (c) 1992, Garrett A. Wollman.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by the University of
19 * Vermont and State Agricultural College and Garrett A. Wollman.
20 * 4. Neither the name of the University nor the name of the author
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 */
36
37 /*
38 * Intel 82586 Ethernet chip
39 * Register, bit, and structure definitions.
40 *
41 * Written by GAW with reference to the Clarkson Packet Driver code for this
42 * chip written by Russ Nelson and others.
43 */
44
45 struct ie_en_addr {
46 u_char data[6];
47 };
48
49 /*
50 * This is the master configuration block. It tells the hardware where all
51 * the rest of the stuff is.
52 */
53 struct ie_sys_conf_ptr {
54 u_short mbz; /* must be zero */
55 u_char ie_bus_use; /* true if 8-bit only */
56 u_char mbz2[5]; /* must be zero */
57 caddr_t ie_iscp_ptr; /* 24-bit physaddr of ISCP */
58 };
59
60 /*
61 * Note that this is wired in hardware; the SCP is always located here, no
62 * matter what.
63 */
64 #define IE_SCP_ADDR 0xfffff4
65
66 /*
67 * The tells the hardware where all the rest of the stuff is, too.
68 * FIXME: some of these should be re-commented after we figure out their
69 * REAL function.
70 */
71 struct ie_int_sys_conf_ptr {
72 u_char ie_busy; /* zeroed after init */
73 u_char mbz;
74 u_short ie_scb_offset; /* 16-bit physaddr of next struct */
75 caddr_t ie_base; /* 24-bit physaddr for all 16-bit vars */
76 };
77
78 /*
79 * This FINALLY tells the hardware what to do and where to put it.
80 */
81 struct ie_sys_ctl_block {
82 u_short ie_status; /* status word */
83 u_short ie_command; /* command word */
84 u_short ie_command_list; /* 16-pointer to command block list */
85 u_short ie_recv_list; /* 16-pointer to receive frame list */
86 u_short ie_err_crc; /* CRC errors */
87 u_short ie_err_align; /* Alignment errors */
88 u_short ie_err_resource; /* Resource errors */
89 u_short ie_err_overrun; /* Overrun errors */
90 };
91
92 /* Command values */
93 #define IE_RU_COMMAND 0x0070 /* mask for RU command */
94 #define IE_RU_NOP 0 /* for completeness */
95 #define IE_RU_START 0x0010 /* start receive unit command */
96 #define IE_RU_ENABLE 0x0020 /* enable receiver command */
97 #define IE_RU_DISABLE 0x0030 /* disable receiver command */
98 #define IE_RU_ABORT 0x0040 /* abort current receive operation */
99
100 #define IE_CU_COMMAND 0x0700 /* mask for CU command */
101 #define IE_CU_NOP 0 /* included for completeness */
102 #define IE_CU_START 0x0100 /* do-command command */
103 #define IE_CU_RESUME 0x0200 /* resume a suspended cmd list */
104 #define IE_CU_STOP 0x0300 /* SUSPEND was already taken */
105 #define IE_CU_ABORT 0x0400 /* abort current command */
106
107 #define IE_ACK_COMMAND 0xf000 /* mask for ACK command */
108 #define IE_ACK_CX 0x8000 /* ack IE_ST_DONE */
109 #define IE_ACK_FR 0x4000 /* ack IE_ST_RECV */
110 #define IE_ACK_CNA 0x2000 /* ack IE_ST_ALLDONE */
111 #define IE_ACK_RNR 0x1000 /* ack IE_ST_RNR */
112
113 #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START)
114 /* is this command an action command? */
115
116 /* Status values */
117 #define IE_ST_WHENCE 0xf000 /* mask for cause of interrupt */
118 #define IE_ST_DONE 0x8000 /* command with I bit completed */
119 #define IE_ST_RECV 0x4000 /* frame received */
120 #define IE_ST_ALLDONE 0x2000 /* all commands completed */
121 #define IE_ST_RNR 0x1000 /* receive not ready */
122
123 #define IE_CU_STATUS 0x700 /* mask for command unit status */
124 #define IE_CU_ACTIVE 0x200 /* command unit is active */
125 #define IE_CU_SUSPEND 0x100 /* command unit is suspended */
126
127 #define IE_RU_STATUS 0x70 /* mask for receiver unit status */
128 #define IE_RU_SUSPEND 0x10 /* receiver is suspended */
129 #define IE_RU_NOSPACE 0x20 /* receiver has no resources */
130 #define IE_RU_READY 0x40 /* reveiver is ready */
131
132 /*
133 * This is filled in partially by the chip, partially by us.
134 */
135 struct ie_recv_frame_desc {
136 u_short ie_fd_status; /* status for this frame */
137 u_short ie_fd_last; /* end of frame list flag */
138 u_short ie_fd_next; /* 16-pointer to next RFD */
139 u_short ie_fd_buf_desc; /* 16-pointer to list of buffer desc's */
140 struct ie_en_addr dest; /* destination ether */
141 struct ie_en_addr src; /* source ether */
142 u_short ie_length; /* 802 length/Ether type */
143 u_short mbz; /* must be zero */
144 };
145
146 #define IE_FD_LAST 0x8000 /* last rfd in list */
147 #define IE_FD_SUSP 0x4000 /* suspend RU after receipt */
148
149 #define IE_FD_COMPLETE 0x8000 /* frame is complete */
150 #define IE_FD_BUSY 0x4000 /* frame is busy */
151 #define IE_FD_OK 0x2000 /* frame is bad */
152 #define IE_FD_RNR 0x0200 /* receiver out of resources here */
153
154 /*
155 * linked list of buffers...
156 */
157 struct ie_recv_buf_desc {
158 u_short ie_rbd_actual; /* status for this buffer */
159 u_short ie_rbd_next; /* 16-pointer to next RBD */
160 caddr_t ie_rbd_buffer; /* 24-pointer to buffer for this RBD */
161 u_short ie_rbd_length; /* length of the buffer */
162 u_short mbz; /* must be zero */
163 };
164
165 #define IE_RBD_LAST 0x8000 /* last buffer */
166 #define IE_RBD_USED 0x4000 /* this buffer has data */
167 /*
168 * All commands share this in common.
169 */
170 struct ie_cmd_common {
171 u_short ie_cmd_status; /* status of this command */
172 u_short ie_cmd_cmd; /* command word */
173 u_short ie_cmd_link; /* link to next command */
174 };
175
176 #define IE_STAT_COMPL 0x8000 /* command is completed */
177 #define IE_STAT_BUSY 0x4000 /* command is running now */
178 #define IE_STAT_OK 0x2000 /* command completed successfully */
179
180 #define IE_CMD_NOP 0x0000 /* NOP */
181 #define IE_CMD_IASETUP 0x0001 /* initial address setup */
182 #define IE_CMD_CONFIG 0x0002 /* configure command */
183 #define IE_CMD_MCAST 0x0003 /* multicast setup command */
184 #define IE_CMD_XMIT 0x0004 /* transmit command */
185 #define IE_CMD_TDR 0x0005 /* time-domain reflectometer command */
186 #define IE_CMD_DUMP 0x0006 /* dump command */
187 #define IE_CMD_DIAGNOSE 0x0007 /* diagnostics command */
188
189 #define IE_CMD_LAST 0x8000 /* this is the last command in the list */
190 #define IE_CMD_SUSPEND 0x4000 /* suspend CU after this command */
191 #define IE_CMD_INTR 0x2000 /* post an interrupt after completion */
192
193 /*
194 * This is the command to transmit a frame.
195 */
196 struct ie_xmit_cmd {
197 struct ie_cmd_common com; /* common part */
198 #define ie_xmit_status com.ie_cmd_status
199
200 u_short ie_xmit_desc; /* 16-pointer to buffer descriptor */
201 struct ie_en_addr ie_xmit_addr; /* destination address */
202
203 u_short ie_xmit_length; /* 802.3 length/Ether type field */
204 };
205
206 #define IE_XS_MAXCOLL 0x000f /* number of collisions during transmit */
207 #define IE_XS_EXCMAX 0x0020 /* exceeded maximum number of collisions */
208 #define IE_XS_SQE 0x0040 /* SQE positive */
209 #define IE_XS_DEFERRED 0x0080 /* transmission deferred */
210 #define IE_XS_UNDERRUN 0x0100 /* DMA underrun */
211 #define IE_XS_LOSTCTS 0x0200 /* Lost CTS */
212 #define IE_XS_NOCARRIER 0x0400 /* No Carrier */
213 #define IE_XS_LATECOLL 0x0800 /* Late collision */
214
215 /*
216 * This is a buffer descriptor for a frame to be transmitted.
217 */
218
219 struct ie_xmit_buf {
220 u_short ie_xmit_flags; /* see below */
221 u_short ie_xmit_next; /* 16-pointer to next desc. */
222 caddr_t ie_xmit_buf; /* 24-pointer to the actual buffer */
223 };
224
225 #define IE_XMIT_LAST 0x8000 /* this TBD is the last one */
226 /* The rest of the `flags' word is actually the length. */
227
228 /*
229 * Multicast setup command.
230 */
231
232 #define MAXMCAST 50 /* must fit in transmit buffer */
233
234 struct ie_mcast_cmd {
235 struct ie_cmd_common com; /* common part */
236 #define ie_mcast_status com.ie_cmd_status
237
238 u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */
239 struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */
240 };
241
242 /*
243 * Time Domain Reflectometer command.
244 */
245
246 struct ie_tdr_cmd {
247 struct ie_cmd_common com; /* common part */
248 #define ie_tdr_status com.ie_cmd_status
249
250 u_short ie_tdr_time; /* error bits and time */
251 };
252
253 #define IE_TDR_SUCCESS 0x8000 /* TDR succeeded without error */
254 #define IE_TDR_XCVR 0x4000 /* detected a transceiver problem */
255 #define IE_TDR_OPEN 0x2000 /* detected an open */
256 #define IE_TDR_SHORT 0x1000 /* TDR detected a short */
257 #define IE_TDR_TIME 0x07ff /* mask for reflection time */
258
259 /*
260 * Initial Address Setup command
261 */
262 struct ie_iasetup_cmd {
263 struct ie_cmd_common com;
264 #define ie_iasetup_status com.ie_cmd_status
265
266 struct ie_en_addr ie_address;
267 };
268
269 /*
270 * Configuration command
271 */
272 struct ie_config_cmd {
273 struct ie_cmd_common com; /* common part */
274 #define ie_config_status com.ie_cmd_status
275
276 u_char ie_config_count; /* byte count (0x0c) */
277 u_char ie_fifo; /* fifo (8) */
278 u_char ie_save_bad; /* save bad frames (0x40) */
279 u_char ie_addr_len; /* address length (0x2e) (AL-LOC == 1) */
280 u_char ie_priority; /* priority and backoff (0x0) */
281 u_char ie_ifs; /* inter-frame spacing (0x60) */
282 u_char ie_slot_low; /* slot time, LSB (0x0) */
283 u_char ie_slot_high; /* slot time, MSN, and retries (0xf2) */
284 u_char ie_promisc; /* 1 if promiscuous, else 0 */
285 u_char ie_crs_cdt; /* CSMA/CD parameters (0x0) */
286 u_char ie_min_len; /* min frame length (0x40) */
287 u_char ie_junk; /* stuff for 82596 (0xff) */
288 };
289
290 /*
291 * Here are a few useful functions. We could have done these as macros,
292 * but since we have the inline facility, it makes sense to use that
293 * instead.
294 */
295 static __inline void
ie_setup_config(volatile struct ie_config_cmd * cmd,int promiscuous,int manchester)296 ie_setup_config(volatile struct ie_config_cmd *cmd,
297 int promiscuous, int manchester) {
298 cmd->ie_config_count = 0x0c;
299 cmd->ie_fifo = 8;
300 cmd->ie_save_bad = 0x40;
301 cmd->ie_addr_len = 0x2e;
302 cmd->ie_priority = 0;
303 cmd->ie_ifs = 0x60;
304 cmd->ie_slot_low = 0;
305 cmd->ie_slot_high = 0xf2;
306 cmd->ie_promisc = !!promiscuous | manchester << 2;
307 cmd->ie_crs_cdt = 0;
308 cmd->ie_min_len = 64;
309 cmd->ie_junk = 0xff;
310 }
311
312 static __inline void *
Align(void * ptr)313 Align(void *ptr) {
314 uintptr_t l = (uintptr_t)ptr;
315 l = (l + 3) & ~3L;
316 return (void *)l;
317 }
318
319 static __inline volatile void *
Alignvol(volatile void * ptr)320 Alignvol(volatile void *ptr) {
321 uintptr_t l = (uintptr_t)ptr;
322 l = (l + 3) & ~3L;
323 return (volatile void *)l;
324 }
325
326 #if 0
327 static __inline void
328 ie_ack(volatile struct ie_sys_ctl_block *scb,
329 u_int mask, int unit,
330 void (*ca)(int)) {
331 scb->ie_command = scb->ie_status & mask;
332 (*ca)(unit);
333 }
334 #endif
335