xref: /freebsd/sys/contrib/device-tree/src/arm64/nvidia/tegra194-p3668.dtsi (revision cb7aa33ac6cd46a5434798e50363136e64f3ae98)
1// SPDX-License-Identifier: GPL-2.0
2#include "tegra194.dtsi"
3
4#include <dt-bindings/mfd/max77620.h>
5
6/ {
7	aliases {
8		ethernet0 = "/bus@0/ethernet@2490000";
9		i2c0 = "/bpmp/i2c";
10		i2c1 = "/bus@0/i2c@3160000";
11		i2c2 = "/bus@0/i2c@c240000";
12		i2c3 = "/bus@0/i2c@3180000";
13		i2c4 = "/bus@0/i2c@3190000";
14		i2c5 = "/bus@0/i2c@31c0000";
15		i2c6 = "/bus@0/i2c@c250000";
16		i2c7 = "/bus@0/i2c@31e0000";
17		rtc0 = "/bpmp/i2c/pmic@3c";
18		rtc1 = "/bus@0/rtc@c2a0000";
19		serial0 = &tcu;
20	};
21
22	chosen {
23		bootargs = "console=ttyTCU0,115200n8";
24		stdout-path = "serial0:115200n8";
25	};
26
27	bus@0 {
28		ethernet@2490000 {
29			status = "okay";
30
31			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
32			phy-handle = <&phy>;
33			phy-mode = "rgmii-id";
34
35			mdio {
36				#address-cells = <1>;
37				#size-cells = <0>;
38
39				phy: ethernet-phy@0 {
40					compatible = "ethernet-phy-ieee802.3-c22";
41					reg = <0x0>;
42					interrupt-parent = <&gpio>;
43					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
44					#phy-cells = <0>;
45				};
46			};
47		};
48
49		memory-controller@2c00000 {
50			status = "okay";
51		};
52
53		serial@3100000 {
54			status = "okay";
55		};
56
57		i2c@3160000 {
58			status = "okay";
59
60			eeprom@50 {
61				compatible = "atmel,24c02";
62				reg = <0x50>;
63
64				label = "module";
65				vcc-supply = <&vdd_1v8ls>;
66				address-width = <8>;
67				pagesize = <8>;
68				size = <256>;
69				read-only;
70			};
71		};
72
73		padctl@3520000 {
74			avdd-usb-supply = <&vdd_usb_3v3>;
75			vclamp-usb-supply = <&vdd_1v8ao>;
76
77			ports {
78				usb2-1 {
79					vbus-supply = <&vdd_5v0_sys>;
80				};
81
82				usb2-3 {
83					vbus-supply = <&vdd_5v0_sys>;
84				};
85
86				usb3-0 {
87					vbus-supply = <&vdd_5v0_sys>;
88				};
89
90				usb3-3 {
91					vbus-supply = <&vdd_5v0_sys>;
92				};
93			};
94		};
95
96		rtc@c2a0000 {
97			status = "okay";
98		};
99
100		pmc@c360000 {
101			nvidia,invert-interrupt;
102		};
103	};
104
105	bpmp {
106		i2c {
107			status = "okay";
108
109			pmic: pmic@3c {
110				compatible = "maxim,max20024";
111				reg = <0x3c>;
112
113				interrupt-parent = <&pmc>;
114				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
115				#interrupt-cells = <2>;
116				interrupt-controller;
117
118				#gpio-cells = <2>;
119				gpio-controller;
120
121				pinctrl-names = "default";
122				pinctrl-0 = <&max20024_default>;
123
124				fps {
125					fps0 {
126						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
127						maxim,shutdown-fps-time-period-us = <640>;
128					};
129
130					fps1 {
131						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
132						maxim,shutdown-fps-time-period-us = <640>;
133						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
134					};
135
136					fps2 {
137						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
138						maxim,shutdown-fps-time-period-us = <640>;
139					};
140				};
141
142				max20024_default: pinmux {
143					gpio0 {
144						pins = "gpio0";
145						function = "gpio";
146					};
147
148					gpio1 {
149						pins = "gpio1";
150						function = "fps-out";
151						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
152					};
153
154					gpio2 {
155						pins = "gpio2";
156						function = "fps-out";
157						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
158					};
159
160					gpio3 {
161						pins = "gpio3";
162						function = "fps-out";
163						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
164					};
165
166					gpio4 {
167						pins = "gpio4";
168						function = "32k-out1";
169						drive-push-pull = <1>;
170					};
171
172					gpio6 {
173						pins = "gpio6";
174						function = "gpio";
175						drive-push-pull = <1>;
176					};
177
178					gpio7 {
179						pins = "gpio7";
180						function = "gpio";
181						drive-push-pull = <0>;
182					};
183				};
184
185				regulators {
186					in-sd0-supply = <&vdd_5v0_sys>;
187					in-sd1-supply = <&vdd_5v0_sys>;
188					in-sd2-supply = <&vdd_5v0_sys>;
189					in-sd3-supply = <&vdd_5v0_sys>;
190					in-sd4-supply = <&vdd_5v0_sys>;
191
192					in-ldo0-1-supply = <&vdd_5v0_sys>;
193					in-ldo2-supply = <&vdd_5v0_sys>;
194					in-ldo3-5-supply = <&vdd_5v0_sys>;
195					in-ldo4-6-supply = <&vdd_5v0_sys>;
196					in-ldo7-8-supply = <&vdd_1v8ls>;
197
198					vdd_1v0: sd0 {
199						regulator-name = "VDDIO_SYS_1V0";
200						regulator-min-microvolt = <1000000>;
201						regulator-max-microvolt = <1000000>;
202						regulator-always-on;
203						regulator-boot-on;
204					};
205
206					vdd_1v8hs: sd1 {
207						regulator-name = "VDDIO_SYS_1V8HS";
208						regulator-min-microvolt = <1800000>;
209						regulator-max-microvolt = <1800000>;
210						regulator-always-on;
211						regulator-boot-on;
212					};
213
214					vdd_1v8ls: sd2 {
215						regulator-name = "VDDIO_SYS_1V8LS";
216						regulator-min-microvolt = <1800000>;
217						regulator-max-microvolt = <1800000>;
218						regulator-always-on;
219						regulator-boot-on;
220					};
221
222					vdd_1v8ao: sd3 {
223						regulator-name = "VDDIO_AO_1V8";
224						regulator-min-microvolt = <1800000>;
225						regulator-max-microvolt = <1800000>;
226						regulator-always-on;
227						regulator-boot-on;
228					};
229
230					sd4 {
231						regulator-name = "VDD_DDR_1V1";
232						regulator-min-microvolt = <1100000>;
233						regulator-max-microvolt = <1100000>;
234						regulator-always-on;
235						regulator-boot-on;
236					};
237
238					ldo0 {
239						regulator-name = "VDD_RTC";
240						regulator-min-microvolt = <800000>;
241						regulator-max-microvolt = <800000>;
242						regulator-always-on;
243						regulator-boot-on;
244					};
245
246					ldo2 {
247						regulator-name = "VDDIO_AO_3V3";
248						regulator-min-microvolt = <3300000>;
249						regulator-max-microvolt = <3300000>;
250						regulator-always-on;
251						regulator-boot-on;
252					};
253
254					vdd_emmc_3v3: ldo3 {
255						regulator-name = "VDD_EMMC_3V3";
256						regulator-min-microvolt = <3300000>;
257						regulator-max-microvolt = <3300000>;
258					};
259
260					vdd_usb_3v3: ldo5 {
261						regulator-name = "VDD_USB_3V3";
262						regulator-min-microvolt = <3300000>;
263						regulator-max-microvolt = <3300000>;
264						regulator-always-on;
265						regulator-boot-on;
266					};
267
268					ldo6 {
269						regulator-name = "VDD_SDIO_3V3";
270						regulator-min-microvolt = <3300000>;
271						regulator-max-microvolt = <3300000>;
272					};
273
274					ldo7 {
275						regulator-name = "AVDD_CSI_1V2";
276						regulator-min-microvolt = <1200000>;
277						regulator-max-microvolt = <1200000>;
278					};
279				};
280			};
281		};
282	};
283};
284