1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
4 *
5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
7 *
8 * This is mainly a variation of 8250.c, credits go to authors mentioned
9 * therein. In fact this driver should be merged into the generic 8250.c
10 * infrastructure perhaps using a 8250_sparc.c module.
11 *
12 * Fixed to use tty_get_baud_rate().
13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 *
15 * Converted to new 2.5.x UART layer.
16 * David S. Miller (davem@davemloft.net), 2002-Jul-29
17 */
18
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/spinlock.h>
22 #include <linux/errno.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/major.h>
26 #include <linux/string.h>
27 #include <linux/ptrace.h>
28 #include <linux/ioport.h>
29 #include <linux/circ_buf.h>
30 #include <linux/serial.h>
31 #include <linux/sysrq.h>
32 #include <linux/console.h>
33 #include <linux/slab.h>
34 #ifdef CONFIG_SERIO
35 #include <linux/serio.h>
36 #endif
37 #include <linux/serial_reg.h>
38 #include <linux/init.h>
39 #include <linux/delay.h>
40 #include <linux/of.h>
41 #include <linux/platform_device.h>
42
43 #include <linux/io.h>
44 #include <asm/irq.h>
45 #include <asm/setup.h>
46
47 #include <linux/serial_core.h>
48 #include <linux/sunserialcore.h>
49
50 /* We are on a NS PC87303 clocked with 24.0 MHz, which results
51 * in a UART clock of 1.8462 MHz.
52 */
53 #define SU_BASE_BAUD (1846200 / 16)
54
55 enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
56 static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
57
58 struct serial_uart_config {
59 char *name;
60 int dfl_xmit_fifo_size;
61 int flags;
62 };
63
64 /*
65 * Here we define the default xmit fifo size used for each type of UART.
66 */
67 static const struct serial_uart_config uart_config[] = {
68 { "unknown", 1, 0 },
69 { "8250", 1, 0 },
70 { "16450", 1, 0 },
71 { "16550", 1, 0 },
72 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
73 { "Cirrus", 1, 0 },
74 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
75 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
76 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
77 { "Startech", 1, 0 },
78 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
79 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
80 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
81 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
82 };
83
84 struct uart_sunsu_port {
85 struct uart_port port;
86 unsigned char acr;
87 unsigned char ier;
88 unsigned short rev;
89 unsigned char lcr;
90 unsigned int lsr_break_flag;
91 unsigned int cflag;
92
93 /* Probing information. */
94 enum su_type su_type;
95 unsigned int type_probed; /* XXX Stupid */
96 unsigned long reg_size;
97
98 #ifdef CONFIG_SERIO
99 struct serio serio;
100 int serio_open;
101 #endif
102 };
103
serial_in(struct uart_sunsu_port * up,int offset)104 static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
105 {
106 offset <<= up->port.regshift;
107
108 switch (up->port.iotype) {
109 case UPIO_HUB6:
110 outb(up->port.hub6 - 1 + offset, up->port.iobase);
111 return inb(up->port.iobase + 1);
112
113 case UPIO_MEM:
114 return readb(up->port.membase + offset);
115
116 default:
117 return inb(up->port.iobase + offset);
118 }
119 }
120
serial_out(struct uart_sunsu_port * up,int offset,int value)121 static void serial_out(struct uart_sunsu_port *up, int offset, int value)
122 {
123 #ifndef CONFIG_SPARC64
124 /*
125 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
126 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
127 * gate outputs a logical one. Since we use level triggered interrupts
128 * we have lockup and watchdog reset. We cannot mask IRQ because
129 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
130 * This problem is similar to what Alpha people suffer, see
131 * 8250_alpha.c.
132 */
133 if (offset == UART_MCR)
134 value |= UART_MCR_OUT2;
135 #endif
136 offset <<= up->port.regshift;
137
138 switch (up->port.iotype) {
139 case UPIO_HUB6:
140 outb(up->port.hub6 - 1 + offset, up->port.iobase);
141 outb(value, up->port.iobase + 1);
142 break;
143
144 case UPIO_MEM:
145 writeb(value, up->port.membase + offset);
146 break;
147
148 default:
149 outb(value, up->port.iobase + offset);
150 }
151 }
152
153 /*
154 * We used to support using pause I/O for certain machines. We
155 * haven't supported this for a while, but just in case it's badly
156 * needed for certain old 386 machines, I've left these #define's
157 * in....
158 */
159 #define serial_inp(up, offset) serial_in(up, offset)
160 #define serial_outp(up, offset, value) serial_out(up, offset, value)
161
162
163 /*
164 * For the 16C950
165 */
serial_icr_write(struct uart_sunsu_port * up,int offset,int value)166 static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
167 {
168 serial_out(up, UART_SCR, offset);
169 serial_out(up, UART_ICR, value);
170 }
171
172 #if 0 /* Unused currently */
173 static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
174 {
175 unsigned int value;
176
177 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
178 serial_out(up, UART_SCR, offset);
179 value = serial_in(up, UART_ICR);
180 serial_icr_write(up, UART_ACR, up->acr);
181
182 return value;
183 }
184 #endif
185
186 #ifdef CONFIG_SERIAL_8250_RSA
187 /*
188 * Attempts to turn on the RSA FIFO. Returns zero on failure.
189 * We set the port uart clock rate if we succeed.
190 */
__enable_rsa(struct uart_sunsu_port * up)191 static int __enable_rsa(struct uart_sunsu_port *up)
192 {
193 unsigned char mode;
194 int result;
195
196 mode = serial_inp(up, UART_RSA_MSR);
197 result = mode & UART_RSA_MSR_FIFO;
198
199 if (!result) {
200 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
201 mode = serial_inp(up, UART_RSA_MSR);
202 result = mode & UART_RSA_MSR_FIFO;
203 }
204
205 if (result)
206 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
207
208 return result;
209 }
210
enable_rsa(struct uart_sunsu_port * up)211 static void enable_rsa(struct uart_sunsu_port *up)
212 {
213 if (up->port.type == PORT_RSA) {
214 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
215 uart_port_lock_irq(&up->port);
216 __enable_rsa(up);
217 uart_port_unlock_irq(&up->port);
218 }
219 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
220 serial_outp(up, UART_RSA_FRR, 0);
221 }
222 }
223
224 /*
225 * Attempts to turn off the RSA FIFO. Returns zero on failure.
226 * It is unknown why interrupts were disabled in here. However,
227 * the caller is expected to preserve this behaviour by grabbing
228 * the spinlock before calling this function.
229 */
disable_rsa(struct uart_sunsu_port * up)230 static void disable_rsa(struct uart_sunsu_port *up)
231 {
232 unsigned char mode;
233 int result;
234
235 if (up->port.type == PORT_RSA &&
236 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
237 uart_port_lock_irq(&up->port);
238
239 mode = serial_inp(up, UART_RSA_MSR);
240 result = !(mode & UART_RSA_MSR_FIFO);
241
242 if (!result) {
243 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
244 mode = serial_inp(up, UART_RSA_MSR);
245 result = !(mode & UART_RSA_MSR_FIFO);
246 }
247
248 if (result)
249 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
250 uart_port_unlock_irq(&up->port);
251 }
252 }
253 #endif /* CONFIG_SERIAL_8250_RSA */
254
__stop_tx(struct uart_sunsu_port * p)255 static inline void __stop_tx(struct uart_sunsu_port *p)
256 {
257 if (p->ier & UART_IER_THRI) {
258 p->ier &= ~UART_IER_THRI;
259 serial_out(p, UART_IER, p->ier);
260 }
261 }
262
sunsu_stop_tx(struct uart_port * port)263 static void sunsu_stop_tx(struct uart_port *port)
264 {
265 struct uart_sunsu_port *up =
266 container_of(port, struct uart_sunsu_port, port);
267
268 __stop_tx(up);
269
270 /*
271 * We really want to stop the transmitter from sending.
272 */
273 if (up->port.type == PORT_16C950) {
274 up->acr |= UART_ACR_TXDIS;
275 serial_icr_write(up, UART_ACR, up->acr);
276 }
277 }
278
sunsu_start_tx(struct uart_port * port)279 static void sunsu_start_tx(struct uart_port *port)
280 {
281 struct uart_sunsu_port *up =
282 container_of(port, struct uart_sunsu_port, port);
283
284 if (!(up->ier & UART_IER_THRI)) {
285 up->ier |= UART_IER_THRI;
286 serial_out(up, UART_IER, up->ier);
287 }
288
289 /*
290 * Re-enable the transmitter if we disabled it.
291 */
292 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
293 up->acr &= ~UART_ACR_TXDIS;
294 serial_icr_write(up, UART_ACR, up->acr);
295 }
296 }
297
sunsu_stop_rx(struct uart_port * port)298 static void sunsu_stop_rx(struct uart_port *port)
299 {
300 struct uart_sunsu_port *up =
301 container_of(port, struct uart_sunsu_port, port);
302
303 up->ier &= ~UART_IER_RLSI;
304 up->port.read_status_mask &= ~UART_LSR_DR;
305 serial_out(up, UART_IER, up->ier);
306 }
307
sunsu_enable_ms(struct uart_port * port)308 static void sunsu_enable_ms(struct uart_port *port)
309 {
310 struct uart_sunsu_port *up =
311 container_of(port, struct uart_sunsu_port, port);
312 unsigned long flags;
313
314 uart_port_lock_irqsave(&up->port, &flags);
315 up->ier |= UART_IER_MSI;
316 serial_out(up, UART_IER, up->ier);
317 uart_port_unlock_irqrestore(&up->port, flags);
318 }
319
320 static void
receive_chars(struct uart_sunsu_port * up,unsigned char * status)321 receive_chars(struct uart_sunsu_port *up, unsigned char *status)
322 {
323 struct tty_port *port = &up->port.state->port;
324 unsigned char ch, flag;
325 int max_count = 256;
326 int saw_console_brk = 0;
327
328 do {
329 ch = serial_inp(up, UART_RX);
330 flag = TTY_NORMAL;
331 up->port.icount.rx++;
332
333 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
334 UART_LSR_FE | UART_LSR_OE))) {
335 /*
336 * For statistics only
337 */
338 if (*status & UART_LSR_BI) {
339 *status &= ~(UART_LSR_FE | UART_LSR_PE);
340 up->port.icount.brk++;
341 if (up->port.cons != NULL &&
342 up->port.line == up->port.cons->index)
343 saw_console_brk = 1;
344 /*
345 * We do the SysRQ and SAK checking
346 * here because otherwise the break
347 * may get masked by ignore_status_mask
348 * or read_status_mask.
349 */
350 if (uart_handle_break(&up->port))
351 goto ignore_char;
352 } else if (*status & UART_LSR_PE)
353 up->port.icount.parity++;
354 else if (*status & UART_LSR_FE)
355 up->port.icount.frame++;
356 if (*status & UART_LSR_OE)
357 up->port.icount.overrun++;
358
359 /*
360 * Mask off conditions which should be ingored.
361 */
362 *status &= up->port.read_status_mask;
363
364 if (up->port.cons != NULL &&
365 up->port.line == up->port.cons->index) {
366 /* Recover the break flag from console xmit */
367 *status |= up->lsr_break_flag;
368 up->lsr_break_flag = 0;
369 }
370
371 if (*status & UART_LSR_BI) {
372 flag = TTY_BREAK;
373 } else if (*status & UART_LSR_PE)
374 flag = TTY_PARITY;
375 else if (*status & UART_LSR_FE)
376 flag = TTY_FRAME;
377 }
378 if (uart_handle_sysrq_char(&up->port, ch))
379 goto ignore_char;
380 if ((*status & up->port.ignore_status_mask) == 0)
381 tty_insert_flip_char(port, ch, flag);
382 if (*status & UART_LSR_OE)
383 /*
384 * Overrun is special, since it's reported
385 * immediately, and doesn't affect the current
386 * character.
387 */
388 tty_insert_flip_char(port, 0, TTY_OVERRUN);
389 ignore_char:
390 *status = serial_inp(up, UART_LSR);
391 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
392
393 if (saw_console_brk)
394 sun_do_break();
395 }
396
transmit_chars(struct uart_sunsu_port * up)397 static void transmit_chars(struct uart_sunsu_port *up)
398 {
399 struct tty_port *tport = &up->port.state->port;
400 unsigned char ch;
401 int count;
402
403 if (up->port.x_char) {
404 serial_outp(up, UART_TX, up->port.x_char);
405 up->port.icount.tx++;
406 up->port.x_char = 0;
407 return;
408 }
409 if (uart_tx_stopped(&up->port)) {
410 sunsu_stop_tx(&up->port);
411 return;
412 }
413 if (kfifo_is_empty(&tport->xmit_fifo)) {
414 __stop_tx(up);
415 return;
416 }
417
418 count = up->port.fifosize;
419 do {
420 if (!uart_fifo_get(&up->port, &ch))
421 break;
422
423 serial_out(up, UART_TX, ch);
424 } while (--count > 0);
425
426 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
427 uart_write_wakeup(&up->port);
428
429 if (kfifo_is_empty(&tport->xmit_fifo))
430 __stop_tx(up);
431 }
432
check_modem_status(struct uart_sunsu_port * up)433 static void check_modem_status(struct uart_sunsu_port *up)
434 {
435 int status;
436
437 status = serial_in(up, UART_MSR);
438
439 if ((status & UART_MSR_ANY_DELTA) == 0)
440 return;
441
442 if (status & UART_MSR_TERI)
443 up->port.icount.rng++;
444 if (status & UART_MSR_DDSR)
445 up->port.icount.dsr++;
446 if (status & UART_MSR_DDCD)
447 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
448 if (status & UART_MSR_DCTS)
449 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
450
451 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
452 }
453
sunsu_serial_interrupt(int irq,void * dev_id)454 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
455 {
456 struct uart_sunsu_port *up = dev_id;
457 unsigned long flags;
458 unsigned char status;
459
460 uart_port_lock_irqsave(&up->port, &flags);
461
462 do {
463 status = serial_inp(up, UART_LSR);
464 if (status & UART_LSR_DR)
465 receive_chars(up, &status);
466 check_modem_status(up);
467 if (status & UART_LSR_THRE)
468 transmit_chars(up);
469
470 tty_flip_buffer_push(&up->port.state->port);
471
472 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
473
474 uart_port_unlock_irqrestore(&up->port, flags);
475
476 return IRQ_HANDLED;
477 }
478
479 /* Separate interrupt handling path for keyboard/mouse ports. */
480
481 static void
482 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
483 unsigned int iflag, unsigned int quot);
484
sunsu_change_mouse_baud(struct uart_sunsu_port * up)485 static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
486 {
487 unsigned int cur_cflag = up->cflag;
488 int quot, new_baud;
489
490 up->cflag &= ~CBAUD;
491 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
492
493 quot = up->port.uartclk / (16 * new_baud);
494
495 sunsu_change_speed(&up->port, up->cflag, 0, quot);
496 }
497
receive_kbd_ms_chars(struct uart_sunsu_port * up,int is_break)498 static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
499 {
500 do {
501 unsigned char ch = serial_inp(up, UART_RX);
502
503 /* Stop-A is handled by drivers/char/keyboard.c now. */
504 if (up->su_type == SU_PORT_KBD) {
505 #ifdef CONFIG_SERIO
506 serio_interrupt(&up->serio, ch, 0);
507 #endif
508 } else if (up->su_type == SU_PORT_MS) {
509 int ret = suncore_mouse_baud_detection(ch, is_break);
510
511 switch (ret) {
512 case 2:
513 sunsu_change_mouse_baud(up);
514 fallthrough;
515 case 1:
516 break;
517
518 case 0:
519 #ifdef CONFIG_SERIO
520 serio_interrupt(&up->serio, ch, 0);
521 #endif
522 break;
523 }
524 }
525 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
526 }
527
sunsu_kbd_ms_interrupt(int irq,void * dev_id)528 static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
529 {
530 struct uart_sunsu_port *up = dev_id;
531
532 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
533 unsigned char status = serial_inp(up, UART_LSR);
534
535 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
536 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
537 }
538
539 return IRQ_HANDLED;
540 }
541
sunsu_tx_empty(struct uart_port * port)542 static unsigned int sunsu_tx_empty(struct uart_port *port)
543 {
544 struct uart_sunsu_port *up =
545 container_of(port, struct uart_sunsu_port, port);
546 unsigned long flags;
547 unsigned int ret;
548
549 uart_port_lock_irqsave(&up->port, &flags);
550 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
551 uart_port_unlock_irqrestore(&up->port, flags);
552
553 return ret;
554 }
555
sunsu_get_mctrl(struct uart_port * port)556 static unsigned int sunsu_get_mctrl(struct uart_port *port)
557 {
558 struct uart_sunsu_port *up =
559 container_of(port, struct uart_sunsu_port, port);
560 unsigned char status;
561 unsigned int ret;
562
563 status = serial_in(up, UART_MSR);
564
565 ret = 0;
566 if (status & UART_MSR_DCD)
567 ret |= TIOCM_CAR;
568 if (status & UART_MSR_RI)
569 ret |= TIOCM_RNG;
570 if (status & UART_MSR_DSR)
571 ret |= TIOCM_DSR;
572 if (status & UART_MSR_CTS)
573 ret |= TIOCM_CTS;
574 return ret;
575 }
576
sunsu_set_mctrl(struct uart_port * port,unsigned int mctrl)577 static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
578 {
579 struct uart_sunsu_port *up =
580 container_of(port, struct uart_sunsu_port, port);
581 unsigned char mcr = 0;
582
583 if (mctrl & TIOCM_RTS)
584 mcr |= UART_MCR_RTS;
585 if (mctrl & TIOCM_DTR)
586 mcr |= UART_MCR_DTR;
587 if (mctrl & TIOCM_OUT1)
588 mcr |= UART_MCR_OUT1;
589 if (mctrl & TIOCM_OUT2)
590 mcr |= UART_MCR_OUT2;
591 if (mctrl & TIOCM_LOOP)
592 mcr |= UART_MCR_LOOP;
593
594 serial_out(up, UART_MCR, mcr);
595 }
596
sunsu_break_ctl(struct uart_port * port,int break_state)597 static void sunsu_break_ctl(struct uart_port *port, int break_state)
598 {
599 struct uart_sunsu_port *up =
600 container_of(port, struct uart_sunsu_port, port);
601 unsigned long flags;
602
603 uart_port_lock_irqsave(&up->port, &flags);
604 if (break_state == -1)
605 up->lcr |= UART_LCR_SBC;
606 else
607 up->lcr &= ~UART_LCR_SBC;
608 serial_out(up, UART_LCR, up->lcr);
609 uart_port_unlock_irqrestore(&up->port, flags);
610 }
611
sunsu_startup(struct uart_port * port)612 static int sunsu_startup(struct uart_port *port)
613 {
614 struct uart_sunsu_port *up =
615 container_of(port, struct uart_sunsu_port, port);
616 unsigned long flags;
617 int retval;
618
619 if (up->port.type == PORT_16C950) {
620 /* Wake up and initialize UART */
621 up->acr = 0;
622 serial_outp(up, UART_LCR, 0xBF);
623 serial_outp(up, UART_EFR, UART_EFR_ECB);
624 serial_outp(up, UART_IER, 0);
625 serial_outp(up, UART_LCR, 0);
626 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
627 serial_outp(up, UART_LCR, 0xBF);
628 serial_outp(up, UART_EFR, UART_EFR_ECB);
629 serial_outp(up, UART_LCR, 0);
630 }
631
632 #ifdef CONFIG_SERIAL_8250_RSA
633 /*
634 * If this is an RSA port, see if we can kick it up to the
635 * higher speed clock.
636 */
637 enable_rsa(up);
638 #endif
639
640 /*
641 * Clear the FIFO buffers and disable them.
642 * (they will be reenabled in set_termios())
643 */
644 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
645 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
646 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
647 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
648 serial_outp(up, UART_FCR, 0);
649 }
650
651 /*
652 * Clear the interrupt registers.
653 */
654 (void) serial_inp(up, UART_LSR);
655 (void) serial_inp(up, UART_RX);
656 (void) serial_inp(up, UART_IIR);
657 (void) serial_inp(up, UART_MSR);
658
659 /*
660 * At this point, there's no way the LSR could still be 0xff;
661 * if it is, then bail out, because there's likely no UART
662 * here.
663 */
664 if (!(up->port.flags & UPF_BUGGY_UART) &&
665 (serial_inp(up, UART_LSR) == 0xff)) {
666 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
667 return -ENODEV;
668 }
669
670 if (up->su_type != SU_PORT_PORT) {
671 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
672 IRQF_SHARED, su_typev[up->su_type], up);
673 } else {
674 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
675 IRQF_SHARED, su_typev[up->su_type], up);
676 }
677 if (retval) {
678 printk("su: Cannot register IRQ %d\n", up->port.irq);
679 return retval;
680 }
681
682 /*
683 * Now, initialize the UART
684 */
685 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
686
687 uart_port_lock_irqsave(&up->port, &flags);
688
689 up->port.mctrl |= TIOCM_OUT2;
690
691 sunsu_set_mctrl(&up->port, up->port.mctrl);
692 uart_port_unlock_irqrestore(&up->port, flags);
693
694 /*
695 * Finally, enable interrupts. Note: Modem status interrupts
696 * are set via set_termios(), which will be occurring imminently
697 * anyway, so we don't enable them here.
698 */
699 up->ier = UART_IER_RLSI | UART_IER_RDI;
700 serial_outp(up, UART_IER, up->ier);
701
702 if (up->port.flags & UPF_FOURPORT) {
703 unsigned int icp;
704 /*
705 * Enable interrupts on the AST Fourport board
706 */
707 icp = (up->port.iobase & 0xfe0) | 0x01f;
708 outb_p(0x80, icp);
709 (void) inb_p(icp);
710 }
711
712 /*
713 * And clear the interrupt registers again for luck.
714 */
715 (void) serial_inp(up, UART_LSR);
716 (void) serial_inp(up, UART_RX);
717 (void) serial_inp(up, UART_IIR);
718 (void) serial_inp(up, UART_MSR);
719
720 return 0;
721 }
722
sunsu_shutdown(struct uart_port * port)723 static void sunsu_shutdown(struct uart_port *port)
724 {
725 struct uart_sunsu_port *up =
726 container_of(port, struct uart_sunsu_port, port);
727 unsigned long flags;
728
729 /*
730 * Disable interrupts from this port
731 */
732 up->ier = 0;
733 serial_outp(up, UART_IER, 0);
734
735 uart_port_lock_irqsave(&up->port, &flags);
736 if (up->port.flags & UPF_FOURPORT) {
737 /* reset interrupts on the AST Fourport board */
738 inb((up->port.iobase & 0xfe0) | 0x1f);
739 up->port.mctrl |= TIOCM_OUT1;
740 } else
741 up->port.mctrl &= ~TIOCM_OUT2;
742
743 sunsu_set_mctrl(&up->port, up->port.mctrl);
744 uart_port_unlock_irqrestore(&up->port, flags);
745
746 /*
747 * Disable break condition and FIFOs
748 */
749 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
750 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
751 UART_FCR_CLEAR_RCVR |
752 UART_FCR_CLEAR_XMIT);
753 serial_outp(up, UART_FCR, 0);
754
755 #ifdef CONFIG_SERIAL_8250_RSA
756 /*
757 * Reset the RSA board back to 115kbps compat mode.
758 */
759 disable_rsa(up);
760 #endif
761
762 /*
763 * Read data port to reset things.
764 */
765 (void) serial_in(up, UART_RX);
766
767 free_irq(up->port.irq, up);
768 }
769
770 static void
sunsu_change_speed(struct uart_port * port,unsigned int cflag,unsigned int iflag,unsigned int quot)771 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
772 unsigned int iflag, unsigned int quot)
773 {
774 struct uart_sunsu_port *up =
775 container_of(port, struct uart_sunsu_port, port);
776 unsigned char cval, fcr = 0;
777 unsigned long flags;
778
779 switch (cflag & CSIZE) {
780 case CS5:
781 cval = 0x00;
782 break;
783 case CS6:
784 cval = 0x01;
785 break;
786 case CS7:
787 cval = 0x02;
788 break;
789 default:
790 case CS8:
791 cval = 0x03;
792 break;
793 }
794
795 if (cflag & CSTOPB)
796 cval |= 0x04;
797 if (cflag & PARENB)
798 cval |= UART_LCR_PARITY;
799 if (!(cflag & PARODD))
800 cval |= UART_LCR_EPAR;
801 if (cflag & CMSPAR)
802 cval |= UART_LCR_SPAR;
803
804 /*
805 * Work around a bug in the Oxford Semiconductor 952 rev B
806 * chip which causes it to seriously miscalculate baud rates
807 * when DLL is 0.
808 */
809 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
810 up->rev == 0x5201)
811 quot ++;
812
813 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
814 if ((up->port.uartclk / quot) < (2400 * 16))
815 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
816 #ifdef CONFIG_SERIAL_8250_RSA
817 else if (up->port.type == PORT_RSA)
818 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
819 #endif
820 else
821 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
822 }
823 if (up->port.type == PORT_16750)
824 fcr |= UART_FCR7_64BYTE;
825
826 /*
827 * Ok, we're now changing the port state. Do it with
828 * interrupts disabled.
829 */
830 uart_port_lock_irqsave(&up->port, &flags);
831
832 /*
833 * Update the per-port timeout.
834 */
835 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
836
837 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
838 if (iflag & INPCK)
839 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
840 if (iflag & (IGNBRK | BRKINT | PARMRK))
841 up->port.read_status_mask |= UART_LSR_BI;
842
843 /*
844 * Characteres to ignore
845 */
846 up->port.ignore_status_mask = 0;
847 if (iflag & IGNPAR)
848 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
849 if (iflag & IGNBRK) {
850 up->port.ignore_status_mask |= UART_LSR_BI;
851 /*
852 * If we're ignoring parity and break indicators,
853 * ignore overruns too (for real raw support).
854 */
855 if (iflag & IGNPAR)
856 up->port.ignore_status_mask |= UART_LSR_OE;
857 }
858
859 /*
860 * ignore all characters if CREAD is not set
861 */
862 if ((cflag & CREAD) == 0)
863 up->port.ignore_status_mask |= UART_LSR_DR;
864
865 /*
866 * CTS flow control flag and modem status interrupts
867 */
868 up->ier &= ~UART_IER_MSI;
869 if (UART_ENABLE_MS(&up->port, cflag))
870 up->ier |= UART_IER_MSI;
871
872 serial_out(up, UART_IER, up->ier);
873
874 if (uart_config[up->port.type].flags & UART_STARTECH) {
875 serial_outp(up, UART_LCR, 0xBF);
876 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
877 }
878 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
879 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
880 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
881 if (up->port.type == PORT_16750)
882 serial_outp(up, UART_FCR, fcr); /* set fcr */
883 serial_outp(up, UART_LCR, cval); /* reset DLAB */
884 up->lcr = cval; /* Save LCR */
885 if (up->port.type != PORT_16750) {
886 if (fcr & UART_FCR_ENABLE_FIFO) {
887 /* emulated UARTs (Lucent Venus 167x) need two steps */
888 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
889 }
890 serial_outp(up, UART_FCR, fcr); /* set fcr */
891 }
892
893 up->cflag = cflag;
894
895 uart_port_unlock_irqrestore(&up->port, flags);
896 }
897
898 static void
sunsu_set_termios(struct uart_port * port,struct ktermios * termios,const struct ktermios * old)899 sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
900 const struct ktermios *old)
901 {
902 unsigned int baud, quot;
903
904 /*
905 * Ask the core to calculate the divisor for us.
906 */
907 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
908 quot = uart_get_divisor(port, baud);
909
910 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
911 }
912
sunsu_release_port(struct uart_port * port)913 static void sunsu_release_port(struct uart_port *port)
914 {
915 }
916
sunsu_request_port(struct uart_port * port)917 static int sunsu_request_port(struct uart_port *port)
918 {
919 return 0;
920 }
921
sunsu_config_port(struct uart_port * port,int flags)922 static void sunsu_config_port(struct uart_port *port, int flags)
923 {
924 struct uart_sunsu_port *up =
925 container_of(port, struct uart_sunsu_port, port);
926
927 if (flags & UART_CONFIG_TYPE) {
928 /*
929 * We are supposed to call autoconfig here, but this requires
930 * splitting all the OBP probing crap from the UART probing.
931 * We'll do it when we kill sunsu.c altogether.
932 */
933 port->type = up->type_probed; /* XXX */
934 }
935 }
936
937 static int
sunsu_verify_port(struct uart_port * port,struct serial_struct * ser)938 sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
939 {
940 return -EINVAL;
941 }
942
943 static const char *
sunsu_type(struct uart_port * port)944 sunsu_type(struct uart_port *port)
945 {
946 int type = port->type;
947
948 if (type >= ARRAY_SIZE(uart_config))
949 type = 0;
950 return uart_config[type].name;
951 }
952
953 static const struct uart_ops sunsu_pops = {
954 .tx_empty = sunsu_tx_empty,
955 .set_mctrl = sunsu_set_mctrl,
956 .get_mctrl = sunsu_get_mctrl,
957 .stop_tx = sunsu_stop_tx,
958 .start_tx = sunsu_start_tx,
959 .stop_rx = sunsu_stop_rx,
960 .enable_ms = sunsu_enable_ms,
961 .break_ctl = sunsu_break_ctl,
962 .startup = sunsu_startup,
963 .shutdown = sunsu_shutdown,
964 .set_termios = sunsu_set_termios,
965 .type = sunsu_type,
966 .release_port = sunsu_release_port,
967 .request_port = sunsu_request_port,
968 .config_port = sunsu_config_port,
969 .verify_port = sunsu_verify_port,
970 };
971
972 #define UART_NR 4
973
974 static struct uart_sunsu_port sunsu_ports[UART_NR];
975 static int nr_inst; /* Number of already registered ports */
976
977 #ifdef CONFIG_SERIO
978
979 static DEFINE_SPINLOCK(sunsu_serio_lock);
980
sunsu_serio_write(struct serio * serio,unsigned char ch)981 static int sunsu_serio_write(struct serio *serio, unsigned char ch)
982 {
983 struct uart_sunsu_port *up = serio->port_data;
984 unsigned long flags;
985 int lsr;
986
987 spin_lock_irqsave(&sunsu_serio_lock, flags);
988
989 do {
990 lsr = serial_in(up, UART_LSR);
991 } while (!(lsr & UART_LSR_THRE));
992
993 /* Send the character out. */
994 serial_out(up, UART_TX, ch);
995
996 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
997
998 return 0;
999 }
1000
sunsu_serio_open(struct serio * serio)1001 static int sunsu_serio_open(struct serio *serio)
1002 {
1003 struct uart_sunsu_port *up = serio->port_data;
1004 unsigned long flags;
1005 int ret;
1006
1007 spin_lock_irqsave(&sunsu_serio_lock, flags);
1008 if (!up->serio_open) {
1009 up->serio_open = 1;
1010 ret = 0;
1011 } else
1012 ret = -EBUSY;
1013 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1014
1015 return ret;
1016 }
1017
sunsu_serio_close(struct serio * serio)1018 static void sunsu_serio_close(struct serio *serio)
1019 {
1020 struct uart_sunsu_port *up = serio->port_data;
1021 unsigned long flags;
1022
1023 spin_lock_irqsave(&sunsu_serio_lock, flags);
1024 up->serio_open = 0;
1025 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1026 }
1027
1028 #endif /* CONFIG_SERIO */
1029
sunsu_autoconfig(struct uart_sunsu_port * up)1030 static void sunsu_autoconfig(struct uart_sunsu_port *up)
1031 {
1032 unsigned char status1, status2, scratch, scratch2, scratch3;
1033 unsigned char save_lcr, save_mcr;
1034 unsigned long flags;
1035
1036 if (up->su_type == SU_PORT_NONE)
1037 return;
1038
1039 up->type_probed = PORT_UNKNOWN;
1040 up->port.iotype = UPIO_MEM;
1041
1042 uart_port_lock_irqsave(&up->port, &flags);
1043
1044 if (!(up->port.flags & UPF_BUGGY_UART)) {
1045 /*
1046 * Do a simple existence test first; if we fail this, there's
1047 * no point trying anything else.
1048 *
1049 * 0x80 is used as a nonsense port to prevent against false
1050 * positives due to ISA bus float. The assumption is that
1051 * 0x80 is a non-existent port; which should be safe since
1052 * include/asm/io.h also makes this assumption.
1053 */
1054 scratch = serial_inp(up, UART_IER);
1055 serial_outp(up, UART_IER, 0);
1056 #ifdef __i386__
1057 outb(0xff, 0x080);
1058 #endif
1059 scratch2 = serial_inp(up, UART_IER);
1060 serial_outp(up, UART_IER, 0x0f);
1061 #ifdef __i386__
1062 outb(0, 0x080);
1063 #endif
1064 scratch3 = serial_inp(up, UART_IER);
1065 serial_outp(up, UART_IER, scratch);
1066 if (scratch2 != 0 || scratch3 != 0x0F)
1067 goto out; /* We failed; there's nothing here */
1068 }
1069
1070 save_mcr = serial_in(up, UART_MCR);
1071 save_lcr = serial_in(up, UART_LCR);
1072
1073 /*
1074 * Check to see if a UART is really there. Certain broken
1075 * internal modems based on the Rockwell chipset fail this
1076 * test, because they apparently don't implement the loopback
1077 * test mode. So this test is skipped on the COM 1 through
1078 * COM 4 ports. This *should* be safe, since no board
1079 * manufacturer would be stupid enough to design a board
1080 * that conflicts with COM 1-4 --- we hope!
1081 */
1082 if (!(up->port.flags & UPF_SKIP_TEST)) {
1083 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1084 status1 = serial_inp(up, UART_MSR) & 0xF0;
1085 serial_outp(up, UART_MCR, save_mcr);
1086 if (status1 != 0x90)
1087 goto out; /* We failed loopback test */
1088 }
1089 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1090 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1091 serial_outp(up, UART_LCR, 0);
1092 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1093 scratch = serial_in(up, UART_IIR) >> 6;
1094 switch (scratch) {
1095 case 0:
1096 up->port.type = PORT_16450;
1097 break;
1098 case 1:
1099 up->port.type = PORT_UNKNOWN;
1100 break;
1101 case 2:
1102 up->port.type = PORT_16550;
1103 break;
1104 case 3:
1105 up->port.type = PORT_16550A;
1106 break;
1107 }
1108 if (up->port.type == PORT_16550A) {
1109 /* Check for Startech UART's */
1110 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1111 if (serial_in(up, UART_EFR) == 0) {
1112 up->port.type = PORT_16650;
1113 } else {
1114 serial_outp(up, UART_LCR, 0xBF);
1115 if (serial_in(up, UART_EFR) == 0)
1116 up->port.type = PORT_16650V2;
1117 }
1118 }
1119 if (up->port.type == PORT_16550A) {
1120 /* Check for TI 16750 */
1121 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1122 serial_outp(up, UART_FCR,
1123 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1124 scratch = serial_in(up, UART_IIR) >> 5;
1125 if (scratch == 7) {
1126 /*
1127 * If this is a 16750, and not a cheap UART
1128 * clone, then it should only go into 64 byte
1129 * mode if the UART_FCR7_64BYTE bit was set
1130 * while UART_LCR_DLAB was latched.
1131 */
1132 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1133 serial_outp(up, UART_LCR, 0);
1134 serial_outp(up, UART_FCR,
1135 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1136 scratch = serial_in(up, UART_IIR) >> 5;
1137 if (scratch == 6)
1138 up->port.type = PORT_16750;
1139 }
1140 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1141 }
1142 serial_outp(up, UART_LCR, save_lcr);
1143 if (up->port.type == PORT_16450) {
1144 scratch = serial_in(up, UART_SCR);
1145 serial_outp(up, UART_SCR, 0xa5);
1146 status1 = serial_in(up, UART_SCR);
1147 serial_outp(up, UART_SCR, 0x5a);
1148 status2 = serial_in(up, UART_SCR);
1149 serial_outp(up, UART_SCR, scratch);
1150
1151 if ((status1 != 0xa5) || (status2 != 0x5a))
1152 up->port.type = PORT_8250;
1153 }
1154
1155 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1156
1157 if (up->port.type == PORT_UNKNOWN)
1158 goto out;
1159 up->type_probed = up->port.type; /* XXX */
1160
1161 /*
1162 * Reset the UART.
1163 */
1164 #ifdef CONFIG_SERIAL_8250_RSA
1165 if (up->port.type == PORT_RSA)
1166 serial_outp(up, UART_RSA_FRR, 0);
1167 #endif
1168 serial_outp(up, UART_MCR, save_mcr);
1169 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1170 UART_FCR_CLEAR_RCVR |
1171 UART_FCR_CLEAR_XMIT));
1172 serial_outp(up, UART_FCR, 0);
1173 (void)serial_in(up, UART_RX);
1174 serial_outp(up, UART_IER, 0);
1175
1176 out:
1177 uart_port_unlock_irqrestore(&up->port, flags);
1178 }
1179
1180 static struct uart_driver sunsu_reg = {
1181 .owner = THIS_MODULE,
1182 .driver_name = "sunsu",
1183 .dev_name = "ttyS",
1184 .major = TTY_MAJOR,
1185 };
1186
sunsu_kbd_ms_init(struct uart_sunsu_port * up)1187 static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1188 {
1189 int quot, baud;
1190 #ifdef CONFIG_SERIO
1191 struct serio *serio;
1192 #endif
1193
1194 if (up->su_type == SU_PORT_KBD) {
1195 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1196 baud = 1200;
1197 } else {
1198 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1199 baud = 4800;
1200 }
1201 quot = up->port.uartclk / (16 * baud);
1202
1203 sunsu_autoconfig(up);
1204 if (up->port.type == PORT_UNKNOWN)
1205 return -ENODEV;
1206
1207 printk("%pOF: %s port at %llx, irq %u\n",
1208 up->port.dev->of_node,
1209 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1210 (unsigned long long) up->port.mapbase,
1211 up->port.irq);
1212
1213 #ifdef CONFIG_SERIO
1214 serio = &up->serio;
1215 serio->port_data = up;
1216
1217 serio->id.type = SERIO_RS232;
1218 if (up->su_type == SU_PORT_KBD) {
1219 serio->id.proto = SERIO_SUNKBD;
1220 strscpy(serio->name, "sukbd", sizeof(serio->name));
1221 } else {
1222 serio->id.proto = SERIO_SUN;
1223 serio->id.extra = 1;
1224 strscpy(serio->name, "sums", sizeof(serio->name));
1225 }
1226 strscpy(serio->phys,
1227 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1228 sizeof(serio->phys));
1229
1230 serio->write = sunsu_serio_write;
1231 serio->open = sunsu_serio_open;
1232 serio->close = sunsu_serio_close;
1233 serio->dev.parent = up->port.dev;
1234
1235 serio_register_port(serio);
1236 #endif
1237
1238 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1239
1240 sunsu_startup(&up->port);
1241 return 0;
1242 }
1243
1244 /*
1245 * ------------------------------------------------------------
1246 * Serial console driver
1247 * ------------------------------------------------------------
1248 */
1249
1250 #ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1251
1252 /*
1253 * Wait for transmitter & holding register to empty
1254 */
wait_for_xmitr(struct uart_sunsu_port * up)1255 static void wait_for_xmitr(struct uart_sunsu_port *up)
1256 {
1257 unsigned int status, tmout = 10000;
1258
1259 /* Wait up to 10ms for the character(s) to be sent. */
1260 do {
1261 status = serial_in(up, UART_LSR);
1262
1263 if (status & UART_LSR_BI)
1264 up->lsr_break_flag = UART_LSR_BI;
1265
1266 if (--tmout == 0)
1267 break;
1268 udelay(1);
1269 } while (!uart_lsr_tx_empty(status));
1270
1271 /* Wait up to 1s for flow control if necessary */
1272 if (up->port.flags & UPF_CONS_FLOW) {
1273 tmout = 1000000;
1274 while (--tmout &&
1275 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1276 udelay(1);
1277 }
1278 }
1279
sunsu_console_putchar(struct uart_port * port,unsigned char ch)1280 static void sunsu_console_putchar(struct uart_port *port, unsigned char ch)
1281 {
1282 struct uart_sunsu_port *up =
1283 container_of(port, struct uart_sunsu_port, port);
1284
1285 wait_for_xmitr(up);
1286 serial_out(up, UART_TX, ch);
1287 }
1288
1289 /*
1290 * Print a string to the serial port trying not to disturb
1291 * any possible real use of the port...
1292 */
sunsu_console_write(struct console * co,const char * s,unsigned int count)1293 static void sunsu_console_write(struct console *co, const char *s,
1294 unsigned int count)
1295 {
1296 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1297 unsigned long flags;
1298 unsigned int ier;
1299 int locked = 1;
1300
1301 if (up->port.sysrq || oops_in_progress)
1302 locked = uart_port_trylock_irqsave(&up->port, &flags);
1303 else
1304 uart_port_lock_irqsave(&up->port, &flags);
1305
1306 /*
1307 * First save the UER then disable the interrupts
1308 */
1309 ier = serial_in(up, UART_IER);
1310 serial_out(up, UART_IER, 0);
1311
1312 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1313
1314 /*
1315 * Finally, wait for transmitter to become empty
1316 * and restore the IER
1317 */
1318 wait_for_xmitr(up);
1319 serial_out(up, UART_IER, ier);
1320
1321 if (locked)
1322 uart_port_unlock_irqrestore(&up->port, flags);
1323 }
1324
1325 /*
1326 * Setup initial baud/bits/parity. We do two things here:
1327 * - construct a cflag setting for the first su_open()
1328 * - initialize the serial port
1329 * Return non-zero if we didn't find a serial port.
1330 */
sunsu_console_setup(struct console * co,char * options)1331 static int __init sunsu_console_setup(struct console *co, char *options)
1332 {
1333 static struct ktermios dummy;
1334 struct ktermios termios;
1335 struct uart_port *port;
1336
1337 printk("Console: ttyS%d (SU)\n",
1338 (sunsu_reg.minor - 64) + co->index);
1339
1340 if (co->index > nr_inst)
1341 return -ENODEV;
1342 port = &sunsu_ports[co->index].port;
1343
1344 /*
1345 * Temporary fix.
1346 */
1347 spin_lock_init(&port->lock);
1348
1349 /* Get firmware console settings. */
1350 sunserial_console_termios(co, port->dev->of_node);
1351
1352 memset(&termios, 0, sizeof(struct ktermios));
1353 termios.c_cflag = co->cflag;
1354 port->mctrl |= TIOCM_DTR;
1355 port->ops->set_termios(port, &termios, &dummy);
1356
1357 return 0;
1358 }
1359
1360 static struct console sunsu_console = {
1361 .name = "ttyS",
1362 .write = sunsu_console_write,
1363 .device = uart_console_device,
1364 .setup = sunsu_console_setup,
1365 .flags = CON_PRINTBUFFER,
1366 .index = -1,
1367 .data = &sunsu_reg,
1368 };
1369
1370 /*
1371 * Register console.
1372 */
1373
SUNSU_CONSOLE(void)1374 static inline struct console *SUNSU_CONSOLE(void)
1375 {
1376 return &sunsu_console;
1377 }
1378 #else
1379 #define SUNSU_CONSOLE() (NULL)
1380 #define sunsu_serial_console_init() do { } while (0)
1381 #endif
1382
su_get_type(struct device_node * dp)1383 static enum su_type su_get_type(struct device_node *dp)
1384 {
1385 struct device_node *ap __free(device_node) =
1386 of_find_node_by_path("/aliases");
1387
1388 if (ap) {
1389 const char *keyb = of_get_property(ap, "keyboard", NULL);
1390 const char *ms = of_get_property(ap, "mouse", NULL);
1391
1392 if (keyb) {
1393 struct device_node *match __free(device_node) =
1394 of_find_node_by_path(keyb);
1395
1396 if (dp == match)
1397 return SU_PORT_KBD;
1398 }
1399 if (ms) {
1400 struct device_node *match __free(device_node) =
1401 of_find_node_by_path(ms);
1402
1403 if (dp == match)
1404 return SU_PORT_MS;
1405 }
1406 }
1407 return SU_PORT_PORT;
1408 }
1409
su_probe(struct platform_device * op)1410 static int su_probe(struct platform_device *op)
1411 {
1412 struct device_node *dp = op->dev.of_node;
1413 struct uart_sunsu_port *up;
1414 struct resource *rp;
1415 enum su_type type;
1416 bool ignore_line;
1417 int err;
1418
1419 type = su_get_type(dp);
1420 if (type == SU_PORT_PORT) {
1421 if (nr_inst >= UART_NR)
1422 return -EINVAL;
1423 up = &sunsu_ports[nr_inst];
1424 } else {
1425 up = kzalloc(sizeof(*up), GFP_KERNEL);
1426 if (!up)
1427 return -ENOMEM;
1428 }
1429
1430 up->port.line = nr_inst;
1431
1432 spin_lock_init(&up->port.lock);
1433
1434 up->su_type = type;
1435
1436 rp = &op->resource[0];
1437 up->port.mapbase = rp->start;
1438 up->reg_size = resource_size(rp);
1439 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1440 if (!up->port.membase) {
1441 if (type != SU_PORT_PORT)
1442 kfree(up);
1443 return -ENOMEM;
1444 }
1445
1446 up->port.irq = op->archdata.irqs[0];
1447
1448 up->port.dev = &op->dev;
1449
1450 up->port.type = PORT_UNKNOWN;
1451 up->port.uartclk = (SU_BASE_BAUD * 16);
1452 up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE);
1453
1454 err = 0;
1455 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1456 err = sunsu_kbd_ms_init(up);
1457 if (err) {
1458 of_iounmap(&op->resource[0],
1459 up->port.membase, up->reg_size);
1460 kfree(up);
1461 return err;
1462 }
1463 platform_set_drvdata(op, up);
1464
1465 nr_inst++;
1466
1467 return 0;
1468 }
1469
1470 up->port.flags |= UPF_BOOT_AUTOCONF;
1471
1472 sunsu_autoconfig(up);
1473
1474 err = -ENODEV;
1475 if (up->port.type == PORT_UNKNOWN)
1476 goto out_unmap;
1477
1478 up->port.ops = &sunsu_pops;
1479
1480 ignore_line = false;
1481 if (of_node_name_eq(dp, "rsc-console") ||
1482 of_node_name_eq(dp, "lom-console"))
1483 ignore_line = true;
1484
1485 sunserial_console_match(SUNSU_CONSOLE(), dp,
1486 &sunsu_reg, up->port.line,
1487 ignore_line);
1488 err = uart_add_one_port(&sunsu_reg, &up->port);
1489 if (err)
1490 goto out_unmap;
1491
1492 platform_set_drvdata(op, up);
1493
1494 nr_inst++;
1495
1496 return 0;
1497
1498 out_unmap:
1499 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1500 kfree(up);
1501 return err;
1502 }
1503
su_remove(struct platform_device * op)1504 static void su_remove(struct platform_device *op)
1505 {
1506 struct uart_sunsu_port *up = platform_get_drvdata(op);
1507 bool kbdms = false;
1508
1509 if (up->su_type == SU_PORT_MS ||
1510 up->su_type == SU_PORT_KBD)
1511 kbdms = true;
1512
1513 if (kbdms) {
1514 #ifdef CONFIG_SERIO
1515 serio_unregister_port(&up->serio);
1516 #endif
1517 } else if (up->port.type != PORT_UNKNOWN)
1518 uart_remove_one_port(&sunsu_reg, &up->port);
1519
1520 if (up->port.membase)
1521 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1522
1523 if (kbdms)
1524 kfree(up);
1525 }
1526
1527 static const struct of_device_id su_match[] = {
1528 {
1529 .name = "su",
1530 },
1531 {
1532 .name = "su_pnp",
1533 },
1534 {
1535 .name = "serial",
1536 .compatible = "su",
1537 },
1538 {
1539 .type = "serial",
1540 .compatible = "su",
1541 },
1542 {},
1543 };
1544 MODULE_DEVICE_TABLE(of, su_match);
1545
1546 static struct platform_driver su_driver = {
1547 .driver = {
1548 .name = "su",
1549 .of_match_table = su_match,
1550 },
1551 .probe = su_probe,
1552 .remove = su_remove,
1553 };
1554
sunsu_init(void)1555 static int __init sunsu_init(void)
1556 {
1557 struct device_node *dp;
1558 int err;
1559 int num_uart = 0;
1560
1561 for_each_node_by_name(dp, "su") {
1562 if (su_get_type(dp) == SU_PORT_PORT)
1563 num_uart++;
1564 }
1565 for_each_node_by_name(dp, "su_pnp") {
1566 if (su_get_type(dp) == SU_PORT_PORT)
1567 num_uart++;
1568 }
1569 for_each_node_by_name(dp, "serial") {
1570 if (of_device_is_compatible(dp, "su")) {
1571 if (su_get_type(dp) == SU_PORT_PORT)
1572 num_uart++;
1573 }
1574 }
1575 for_each_node_by_type(dp, "serial") {
1576 if (of_device_is_compatible(dp, "su")) {
1577 if (su_get_type(dp) == SU_PORT_PORT)
1578 num_uart++;
1579 }
1580 }
1581
1582 if (num_uart) {
1583 err = sunserial_register_minors(&sunsu_reg, num_uart);
1584 if (err)
1585 return err;
1586 }
1587
1588 err = platform_driver_register(&su_driver);
1589 if (err && num_uart)
1590 sunserial_unregister_minors(&sunsu_reg, num_uart);
1591
1592 return err;
1593 }
1594
sunsu_exit(void)1595 static void __exit sunsu_exit(void)
1596 {
1597 platform_driver_unregister(&su_driver);
1598 if (sunsu_reg.nr)
1599 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1600 }
1601
1602 module_init(sunsu_init);
1603 module_exit(sunsu_exit);
1604
1605 MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1606 MODULE_DESCRIPTION("Sun SU serial port driver");
1607 MODULE_VERSION("2.0");
1608 MODULE_LICENSE("GPL");
1609