1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Trogdor board device tree source 4 * 5 * Copyright 2020 Google LLC. 6 */ 7 8/dts-v1/; 9 10#include "sc7180-trogdor.dtsi" 11/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ 12#include <arm/cros-ec-keyboard.dtsi> 13#include "sc7180-trogdor-rt5682i-sku.dtsi" 14#include "sc7180-trogdor-ti-sn65dsi86.dtsi" 15 16/ { 17 model = "Google Trogdor (rev1+)"; 18 compatible = "google,trogdor", "qcom,sc7180"; 19}; 20 21&ap_tp_i2c { 22 status = "okay"; 23}; 24 25ap_ts_pen_1v8: &i2c4 { 26 status = "okay"; 27 clock-frequency = <400000>; 28 29 ap_ts: touchscreen@10 { 30 compatible = "elan,ekth3500"; 31 reg = <0x10>; 32 pinctrl-names = "default"; 33 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; 34 35 interrupt-parent = <&tlmm>; 36 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; 37 38 vcc33-supply = <&pp3300_ts>; 39 40 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 41 }; 42}; 43 44&panel { 45 compatible = "auo,b116xa01"; 46}; 47 48&sdhc_2 { 49 status = "okay"; 50}; 51 52&trackpad { 53 interrupts = <58 IRQ_TYPE_EDGE_FALLING>; 54}; 55 56&usb_hub_2_x { 57 vdd-supply = <&pp3300_l7c>; 58}; 59 60&usb_hub_3_x { 61 vdd-supply = <&pp3300_l7c>; 62}; 63 64/* PINCTRL - modifications to sc7180-trogdor.dtsi */ 65 66&trackpad_int_1v8_odl { 67 pins = "gpio58"; 68}; 69 70/* PINCTRL - board-specific pinctrl */ 71 72&tlmm { 73 gpio-line-names = "ESIM_MISO", 74 "ESIM_MOSI", 75 "ESIM_CLK", 76 "ESIM_CS_L", 77 "FP_TO_AP_IRQ_L", 78 "FP_RST_L", 79 "AP_TP_I2C_SDA", 80 "AP_TP_I2C_SCL", 81 "TS_RESET_L", 82 "TS_INT_L", 83 "FPMCU_BOOT0", 84 "EDP_BRIJ_IRQ", 85 "AP_EDP_BKLTEN", 86 "", 87 "", 88 "EDP_BRIJ_I2C_SDA", 89 "EDP_BRIJ_I2C_SCL", 90 "HUB_RST_L", 91 "PEN_RST_ODL", 92 "AP_RAM_ID1", 93 "AP_RAM_ID2", 94 "PEN_IRQ_L", 95 "FPMCU_SEL", 96 "AMP_EN", 97 "P_SENSOR_INT_L", 98 "AP_SAR_SENSOR_SDA", 99 "AP_SAR_SENSOR_SCL", 100 "", 101 "HP_IRQ", 102 "AP_RAM_ID0", 103 "EN_PP3300_DX_EDP", 104 "AP_BRD_ID2", 105 "BRIJ_SUSPEND", 106 "AP_BRD_ID0", 107 "AP_H1_SPI_MISO", 108 "AP_H1_SPI_MOSI", 109 "AP_H1_SPI_CLK", 110 "AP_H1_SPI_CS_L", 111 "", 112 "", 113 "", 114 "", 115 "H1_AP_INT_ODL", 116 "", 117 "UART_AP_TX_DBG_RX", 118 "UART_DBG_TX_AP_RX", 119 "HP_I2C_SDA", 120 "HP_I2C_SCL", 121 "FORCED_USB_BOOT", 122 "", 123 "", 124 "AMP_DIN", 125 "PEN_PDCT_L", 126 "HP_BCLK", 127 "HP_LRCLK", 128 "HP_DOUT", 129 "HP_DIN", 130 "HP_MCLK", 131 "TRACKPAD_INT_1V8_ODL", 132 "AP_EC_SPI_MISO", 133 "AP_EC_SPI_MOSI", 134 "AP_EC_SPI_CLK", 135 "AP_EC_SPI_CS_L", 136 "AP_SPI_CLK", 137 "AP_SPI_MOSI", 138 "AP_SPI_MISO", 139 /* 140 * AP_FLASH_WP_L is crossystem ABI. Schematics 141 * call it BIOS_FLASH_WP_L. 142 */ 143 "AP_FLASH_WP_L", 144 "DBG_SPI_HOLD_L", 145 "AP_SPI_CS0_L", 146 "SD_CD_ODL", 147 "", 148 "", 149 "", 150 "", 151 "", 152 "UIM2_DATA", 153 "UIM2_CLK", 154 "UIM2_RST", 155 "UIM2_PRESENT", 156 "UIM1_DATA", 157 "UIM1_CLK", 158 "UIM1_RST", 159 "", 160 "EN_PP3300_CODEC", 161 "EN_PP3300_HUB", 162 "", 163 "AP_SPI_FP_MISO", 164 "AP_SPI_FP_MOSI", 165 "AP_SPI_FP_CLK", 166 "AP_SPI_FP_CS_L", 167 "AP_SKU_ID1", 168 "AP_RST_REQ", 169 "", 170 "AP_BRD_ID1", 171 "AP_EC_INT_L", 172 "", 173 "", 174 "", 175 "", 176 "", 177 "", 178 "", 179 "", 180 "", 181 "EDP_BRIJ_EN", 182 "AP_SKU_ID0", 183 "", 184 "", 185 "", 186 "", 187 "", 188 "", 189 "", 190 "", 191 "", 192 "AP_TS_PEN_I2C_SDA", 193 "AP_TS_PEN_I2C_SCL", 194 "DP_HOT_PLUG_DET", 195 "EC_IN_RW_ODL"; 196}; 197