1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC 4 * 5 * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries 6 * 7 * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com> 8 */ 9 10#include <dt-bindings/dma/at91.h> 11#include <dt-bindings/pinctrl/at91.h> 12#include <dt-bindings/interrupt-controller/irq.h> 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/clock/at91.h> 15#include <dt-bindings/mfd/at91-usart.h> 16#include <dt-bindings/mfd/atmel-flexcom.h> 17 18/ { 19 #address-cells = <1>; 20 #size-cells = <1>; 21 model = "Microchip SAM9X60 SoC"; 22 compatible = "microchip,sam9x60"; 23 interrupt-parent = <&aic>; 24 25 aliases { 26 serial0 = &dbgu; 27 gpio0 = &pioA; 28 gpio1 = &pioB; 29 gpio2 = &pioC; 30 gpio3 = &pioD; 31 tcb0 = &tcb0; 32 tcb1 = &tcb1; 33 }; 34 35 cpus { 36 #address-cells = <1>; 37 #size-cells = <0>; 38 39 cpu@0 { 40 compatible = "arm,arm926ej-s"; 41 device_type = "cpu"; 42 reg = <0>; 43 }; 44 }; 45 46 memory@20000000 { 47 device_type = "memory"; 48 reg = <0x20000000 0x10000000>; 49 }; 50 51 clocks { 52 slow_xtal: slow_xtal { 53 compatible = "fixed-clock"; 54 #clock-cells = <0>; 55 }; 56 57 main_xtal: main_xtal { 58 compatible = "fixed-clock"; 59 #clock-cells = <0>; 60 }; 61 }; 62 63 sram: sram@300000 { 64 compatible = "mmio-sram"; 65 reg = <0x00300000 0x100000>; 66 #address-cells = <1>; 67 #size-cells = <1>; 68 ranges = <0 0x00300000 0x100000>; 69 }; 70 71 ahb { 72 compatible = "simple-bus"; 73 #address-cells = <1>; 74 #size-cells = <1>; 75 ranges; 76 77 usb0: gadget@500000 { 78 #address-cells = <1>; 79 #size-cells = <0>; 80 compatible = "microchip,sam9x60-udc"; 81 reg = <0x00500000 0x100000 82 0xf803c000 0x400>; 83 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; 84 clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; 85 clock-names = "pclk", "hclk"; 86 assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; 87 assigned-clock-rates = <480000000>; 88 status = "disabled"; 89 }; 90 91 usb1: ohci@600000 { 92 compatible = "atmel,at91rm9200-ohci", "usb-ohci"; 93 reg = <0x00600000 0x100000>; 94 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; 95 clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; 96 clock-names = "ohci_clk", "hclk", "uhpck"; 97 status = "disabled"; 98 }; 99 100 usb2: ehci@700000 { 101 compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; 102 reg = <0x00700000 0x100000>; 103 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; 104 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; 105 clock-names = "usb_clk", "ehci_clk"; 106 assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; 107 assigned-clock-rates = <480000000>; 108 status = "disabled"; 109 }; 110 111 ebi: ebi@10000000 { 112 compatible = "microchip,sam9x60-ebi"; 113 #address-cells = <2>; 114 #size-cells = <1>; 115 atmel,smc = <&smc>; 116 microchip,sfr = <&sfr>; 117 reg = <0x10000000 0x60000000>; 118 ranges = <0x0 0x0 0x10000000 0x10000000 119 0x1 0x0 0x20000000 0x10000000 120 0x2 0x0 0x30000000 0x10000000 121 0x3 0x0 0x40000000 0x10000000 122 0x4 0x0 0x50000000 0x10000000 123 0x5 0x0 0x60000000 0x10000000>; 124 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; 125 status = "disabled"; 126 127 nand_controller: nand-controller { 128 compatible = "microchip,sam9x60-nand-controller"; 129 ecc-engine = <&pmecc>; 130 #address-cells = <2>; 131 #size-cells = <1>; 132 ranges; 133 status = "disabled"; 134 }; 135 }; 136 137 sdmmc0: sdio-host@80000000 { 138 compatible = "microchip,sam9x60-sdhci"; 139 reg = <0x80000000 0x300>; 140 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; 141 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; 142 clock-names = "hclock", "multclk"; 143 assigned-clocks = <&pmc PMC_TYPE_GCK 12>; 144 assigned-clock-rates = <100000000>; 145 status = "disabled"; 146 }; 147 148 sdmmc1: sdio-host@90000000 { 149 compatible = "microchip,sam9x60-sdhci"; 150 reg = <0x90000000 0x300>; 151 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; 152 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; 153 clock-names = "hclock", "multclk"; 154 assigned-clocks = <&pmc PMC_TYPE_GCK 26>; 155 assigned-clock-rates = <100000000>; 156 status = "disabled"; 157 }; 158 159 apb { 160 compatible = "simple-bus"; 161 #address-cells = <1>; 162 #size-cells = <1>; 163 ranges; 164 165 flx4: flexcom@f0000000 { 166 compatible = "atmel,sama5d2-flexcom"; 167 reg = <0xf0000000 0x200>; 168 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; 169 #address-cells = <1>; 170 #size-cells = <1>; 171 ranges = <0x0 0xf0000000 0x800>; 172 status = "disabled"; 173 174 uart4: serial@200 { 175 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 176 reg = <0x200 0x200>; 177 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; 178 dmas = <&dma0 179 (AT91_XDMAC_DT_MEM_IF(0) | 180 AT91_XDMAC_DT_PER_IF(1) | 181 AT91_XDMAC_DT_PERID(8))>, 182 <&dma0 183 (AT91_XDMAC_DT_MEM_IF(0) | 184 AT91_XDMAC_DT_PER_IF(1) | 185 AT91_XDMAC_DT_PERID(9))>; 186 dma-names = "tx", "rx"; 187 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; 188 clock-names = "usart"; 189 atmel,use-dma-rx; 190 atmel,use-dma-tx; 191 atmel,fifo-size = <16>; 192 status = "disabled"; 193 }; 194 195 spi4: spi@400 { 196 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 197 reg = <0x400 0x200>; 198 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; 199 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; 200 clock-names = "spi_clk"; 201 dmas = <&dma0 202 (AT91_XDMAC_DT_MEM_IF(0) | 203 AT91_XDMAC_DT_PER_IF(1) | 204 AT91_XDMAC_DT_PERID(8))>, 205 <&dma0 206 (AT91_XDMAC_DT_MEM_IF(0) | 207 AT91_XDMAC_DT_PER_IF(1) | 208 AT91_XDMAC_DT_PERID(9))>; 209 dma-names = "tx", "rx"; 210 atmel,fifo-size = <16>; 211 status = "disabled"; 212 }; 213 214 i2c4: i2c@600 { 215 compatible = "microchip,sam9x60-i2c"; 216 reg = <0x600 0x200>; 217 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; 218 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; 219 dmas = <&dma0 220 (AT91_XDMAC_DT_MEM_IF(0) | 221 AT91_XDMAC_DT_PER_IF(1) | 222 AT91_XDMAC_DT_PERID(8))>, 223 <&dma0 224 (AT91_XDMAC_DT_MEM_IF(0) | 225 AT91_XDMAC_DT_PER_IF(1) | 226 AT91_XDMAC_DT_PERID(9))>; 227 dma-names = "tx", "rx"; 228 atmel,fifo-size = <16>; 229 status = "disabled"; 230 }; 231 }; 232 233 flx5: flexcom@f0004000 { 234 compatible = "atmel,sama5d2-flexcom"; 235 reg = <0xf0004000 0x200>; 236 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; 237 #address-cells = <1>; 238 #size-cells = <1>; 239 ranges = <0x0 0xf0004000 0x800>; 240 status = "disabled"; 241 242 uart5: serial@200 { 243 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 244 reg = <0x200 0x200>; 245 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 246 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; 247 dmas = <&dma0 248 (AT91_XDMAC_DT_MEM_IF(0) | 249 AT91_XDMAC_DT_PER_IF(1) | 250 AT91_XDMAC_DT_PERID(10))>, 251 <&dma0 252 (AT91_XDMAC_DT_MEM_IF(0) | 253 AT91_XDMAC_DT_PER_IF(1) | 254 AT91_XDMAC_DT_PERID(11))>; 255 dma-names = "tx", "rx"; 256 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; 257 clock-names = "usart"; 258 atmel,use-dma-rx; 259 atmel,use-dma-tx; 260 atmel,fifo-size = <16>; 261 status = "disabled"; 262 }; 263 264 spi5: spi@400 { 265 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 266 reg = <0x400 0x200>; 267 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; 268 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; 269 clock-names = "spi_clk"; 270 dmas = <&dma0 271 (AT91_XDMAC_DT_MEM_IF(0) | 272 AT91_XDMAC_DT_PER_IF(1) | 273 AT91_XDMAC_DT_PERID(10))>, 274 <&dma0 275 (AT91_XDMAC_DT_MEM_IF(0) | 276 AT91_XDMAC_DT_PER_IF(1) | 277 AT91_XDMAC_DT_PERID(11))>; 278 dma-names = "tx", "rx"; 279 atmel,fifo-size = <16>; 280 status = "disabled"; 281 }; 282 283 i2c5: i2c@600 { 284 compatible = "microchip,sam9x60-i2c"; 285 reg = <0x600 0x200>; 286 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; 287 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; 288 dmas = <&dma0 289 (AT91_XDMAC_DT_MEM_IF(0) | 290 AT91_XDMAC_DT_PER_IF(1) | 291 AT91_XDMAC_DT_PERID(10))>, 292 <&dma0 293 (AT91_XDMAC_DT_MEM_IF(0) | 294 AT91_XDMAC_DT_PER_IF(1) | 295 AT91_XDMAC_DT_PERID(11))>; 296 dma-names = "tx", "rx"; 297 atmel,fifo-size = <16>; 298 status = "disabled"; 299 }; 300 }; 301 302 dma0: dma-controller@f0008000 { 303 compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; 304 reg = <0xf0008000 0x1000>; 305 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; 306 #dma-cells = <1>; 307 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; 308 clock-names = "dma_clk"; 309 }; 310 311 ssc: ssc@f0010000 { 312 compatible = "atmel,at91sam9g45-ssc"; 313 reg = <0xf0010000 0x4000>; 314 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; 315 dmas = <&dma0 316 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 317 AT91_XDMAC_DT_PERID(38))>, 318 <&dma0 319 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 320 AT91_XDMAC_DT_PERID(39))>; 321 dma-names = "tx", "rx"; 322 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; 323 clock-names = "pclk"; 324 status = "disabled"; 325 }; 326 327 qspi: spi@f0014000 { 328 compatible = "microchip,sam9x60-qspi"; 329 reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; 330 reg-names = "qspi_base", "qspi_mmap"; 331 interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; 332 dmas = <&dma0 333 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 334 AT91_XDMAC_DT_PERID(26))>, 335 <&dma0 336 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 337 AT91_XDMAC_DT_PERID(27))>; 338 dma-names = "tx", "rx"; 339 clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>; 340 clock-names = "pclk", "qspick"; 341 atmel,pmc = <&pmc>; 342 #address-cells = <1>; 343 #size-cells = <0>; 344 status = "disabled"; 345 }; 346 347 i2s: i2s@f001c000 { 348 compatible = "microchip,sam9x60-i2smcc"; 349 reg = <0xf001c000 0x100>; 350 interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; 351 dmas = <&dma0 352 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 353 AT91_XDMAC_DT_PERID(36))>, 354 <&dma0 355 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 356 AT91_XDMAC_DT_PERID(37))>; 357 dma-names = "tx", "rx"; 358 clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; 359 clock-names = "pclk", "gclk"; 360 status = "disabled"; 361 }; 362 363 flx11: flexcom@f0020000 { 364 compatible = "atmel,sama5d2-flexcom"; 365 reg = <0xf0020000 0x200>; 366 clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; 367 #address-cells = <1>; 368 #size-cells = <1>; 369 ranges = <0x0 0xf0020000 0x800>; 370 status = "disabled"; 371 372 uart11: serial@200 { 373 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 374 reg = <0x200 0x200>; 375 interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; 376 dmas = <&dma0 377 (AT91_XDMAC_DT_MEM_IF(0) | 378 AT91_XDMAC_DT_PER_IF(1) | 379 AT91_XDMAC_DT_PERID(22))>, 380 <&dma0 381 (AT91_XDMAC_DT_MEM_IF(0) | 382 AT91_XDMAC_DT_PER_IF(1) | 383 AT91_XDMAC_DT_PERID(23))>; 384 dma-names = "tx", "rx"; 385 clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; 386 clock-names = "usart"; 387 atmel,use-dma-rx; 388 atmel,use-dma-tx; 389 atmel,fifo-size = <16>; 390 status = "disabled"; 391 }; 392 393 i2c11: i2c@600 { 394 compatible = "microchip,sam9x60-i2c"; 395 reg = <0x600 0x200>; 396 interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; 397 clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; 398 dmas = <&dma0 399 (AT91_XDMAC_DT_MEM_IF(0) | 400 AT91_XDMAC_DT_PER_IF(1) | 401 AT91_XDMAC_DT_PERID(22))>, 402 <&dma0 403 (AT91_XDMAC_DT_MEM_IF(0) | 404 AT91_XDMAC_DT_PER_IF(1) | 405 AT91_XDMAC_DT_PERID(23))>; 406 dma-names = "tx", "rx"; 407 atmel,fifo-size = <16>; 408 status = "disabled"; 409 }; 410 }; 411 412 flx12: flexcom@f0024000 { 413 compatible = "atmel,sama5d2-flexcom"; 414 reg = <0xf0024000 0x200>; 415 clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; 416 #address-cells = <1>; 417 #size-cells = <1>; 418 ranges = <0x0 0xf0024000 0x800>; 419 status = "disabled"; 420 421 uart12: serial@200 { 422 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 423 reg = <0x200 0x200>; 424 interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; 425 dmas = <&dma0 426 (AT91_XDMAC_DT_MEM_IF(0) | 427 AT91_XDMAC_DT_PER_IF(1) | 428 AT91_XDMAC_DT_PERID(24))>, 429 <&dma0 430 (AT91_XDMAC_DT_MEM_IF(0) | 431 AT91_XDMAC_DT_PER_IF(1) | 432 AT91_XDMAC_DT_PERID(25))>; 433 dma-names = "tx", "rx"; 434 clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; 435 clock-names = "usart"; 436 atmel,use-dma-rx; 437 atmel,use-dma-tx; 438 atmel,fifo-size = <16>; 439 status = "disabled"; 440 }; 441 442 i2c12: i2c@600 { 443 compatible = "microchip,sam9x60-i2c"; 444 reg = <0x600 0x200>; 445 interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; 446 clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; 447 dmas = <&dma0 448 (AT91_XDMAC_DT_MEM_IF(0) | 449 AT91_XDMAC_DT_PER_IF(1) | 450 AT91_XDMAC_DT_PERID(24))>, 451 <&dma0 452 (AT91_XDMAC_DT_MEM_IF(0) | 453 AT91_XDMAC_DT_PER_IF(1) | 454 AT91_XDMAC_DT_PERID(25))>; 455 dma-names = "tx", "rx"; 456 atmel,fifo-size = <16>; 457 status = "disabled"; 458 }; 459 }; 460 461 pit64b: timer@f0028000 { 462 compatible = "microchip,sam9x60-pit64b"; 463 reg = <0xf0028000 0x100>; 464 interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; 465 clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; 466 clock-names = "pclk", "gclk"; 467 }; 468 469 sha: crypto@f002c000 { 470 compatible = "atmel,at91sam9g46-sha"; 471 reg = <0xf002c000 0x100>; 472 interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; 473 dmas = <&dma0 474 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 475 AT91_XDMAC_DT_PERID(34))>; 476 dma-names = "tx"; 477 clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; 478 clock-names = "sha_clk"; 479 }; 480 481 trng: trng@f0030000 { 482 compatible = "microchip,sam9x60-trng"; 483 reg = <0xf0030000 0x100>; 484 interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; 485 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; 486 }; 487 488 aes: crypto@f0034000 { 489 compatible = "atmel,at91sam9g46-aes"; 490 reg = <0xf0034000 0x100>; 491 interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; 492 dmas = <&dma0 493 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 494 AT91_XDMAC_DT_PERID(32))>, 495 <&dma0 496 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 497 AT91_XDMAC_DT_PERID(33))>; 498 dma-names = "tx", "rx"; 499 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; 500 clock-names = "aes_clk"; 501 }; 502 503 tdes: crypto@f0038000 { 504 compatible = "atmel,at91sam9g46-tdes"; 505 reg = <0xf0038000 0x100>; 506 interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; 507 dmas = <&dma0 508 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 509 AT91_XDMAC_DT_PERID(31))>, 510 <&dma0 511 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 512 AT91_XDMAC_DT_PERID(30))>; 513 dma-names = "tx", "rx"; 514 clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; 515 clock-names = "tdes_clk"; 516 }; 517 518 classd: classd@f003c000 { 519 compatible = "atmel,sama5d2-classd"; 520 reg = <0xf003c000 0x100>; 521 interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; 522 dmas = <&dma0 523 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 524 AT91_XDMAC_DT_PERID(35))>; 525 dma-names = "tx"; 526 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; 527 clock-names = "pclk", "gclk"; 528 status = "disabled"; 529 }; 530 531 can0: can@f8000000 { 532 compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; 533 reg = <0xf8000000 0x300>; 534 interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; 535 clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; 536 clock-names = "can_clk"; 537 status = "disabled"; 538 }; 539 540 can1: can@f8004000 { 541 compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; 542 reg = <0xf8004000 0x300>; 543 interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; 544 clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; 545 clock-names = "can_clk"; 546 status = "disabled"; 547 }; 548 549 tcb0: timer@f8008000 { 550 compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; 551 #address-cells = <1>; 552 #size-cells = <0>; 553 reg = <0xf8008000 0x100>; 554 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; 555 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; 556 clock-names = "t0_clk", "slow_clk"; 557 }; 558 559 tcb1: timer@f800c000 { 560 compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; 561 #address-cells = <1>; 562 #size-cells = <0>; 563 reg = <0xf800c000 0x100>; 564 interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; 565 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>; 566 clock-names = "t0_clk", "slow_clk"; 567 }; 568 569 flx6: flexcom@f8010000 { 570 compatible = "atmel,sama5d2-flexcom"; 571 reg = <0xf8010000 0x200>; 572 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; 573 #address-cells = <1>; 574 #size-cells = <1>; 575 ranges = <0x0 0xf8010000 0x800>; 576 status = "disabled"; 577 578 uart6: serial@200 { 579 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 580 reg = <0x200 0x200>; 581 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; 582 dmas = <&dma0 583 (AT91_XDMAC_DT_MEM_IF(0) | 584 AT91_XDMAC_DT_PER_IF(1) | 585 AT91_XDMAC_DT_PERID(12))>, 586 <&dma0 587 (AT91_XDMAC_DT_MEM_IF(0) | 588 AT91_XDMAC_DT_PER_IF(1) | 589 AT91_XDMAC_DT_PERID(13))>; 590 dma-names = "tx", "rx"; 591 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; 592 clock-names = "usart"; 593 atmel,use-dma-rx; 594 atmel,use-dma-tx; 595 atmel,fifo-size = <16>; 596 status = "disabled"; 597 }; 598 599 i2c6: i2c@600 { 600 compatible = "microchip,sam9x60-i2c"; 601 reg = <0x600 0x200>; 602 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; 603 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; 604 dmas = <&dma0 605 (AT91_XDMAC_DT_MEM_IF(0) | 606 AT91_XDMAC_DT_PER_IF(1) | 607 AT91_XDMAC_DT_PERID(12))>, 608 <&dma0 609 (AT91_XDMAC_DT_MEM_IF(0) | 610 AT91_XDMAC_DT_PER_IF(1) | 611 AT91_XDMAC_DT_PERID(13))>; 612 dma-names = "tx", "rx"; 613 atmel,fifo-size = <16>; 614 status = "disabled"; 615 }; 616 }; 617 618 flx7: flexcom@f8014000 { 619 compatible = "atmel,sama5d2-flexcom"; 620 reg = <0xf8014000 0x200>; 621 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; 622 #address-cells = <1>; 623 #size-cells = <1>; 624 ranges = <0x0 0xf8014000 0x800>; 625 status = "disabled"; 626 627 uart7: serial@200 { 628 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 629 reg = <0x200 0x200>; 630 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; 631 dmas = <&dma0 632 (AT91_XDMAC_DT_MEM_IF(0) | 633 AT91_XDMAC_DT_PER_IF(1) | 634 AT91_XDMAC_DT_PERID(14))>, 635 <&dma0 636 (AT91_XDMAC_DT_MEM_IF(0) | 637 AT91_XDMAC_DT_PER_IF(1) | 638 AT91_XDMAC_DT_PERID(15))>; 639 dma-names = "tx", "rx"; 640 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; 641 clock-names = "usart"; 642 atmel,use-dma-rx; 643 atmel,use-dma-tx; 644 atmel,fifo-size = <16>; 645 status = "disabled"; 646 }; 647 648 i2c7: i2c@600 { 649 compatible = "microchip,sam9x60-i2c"; 650 reg = <0x600 0x200>; 651 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; 652 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; 653 dmas = <&dma0 654 (AT91_XDMAC_DT_MEM_IF(0) | 655 AT91_XDMAC_DT_PER_IF(1) | 656 AT91_XDMAC_DT_PERID(14))>, 657 <&dma0 658 (AT91_XDMAC_DT_MEM_IF(0) | 659 AT91_XDMAC_DT_PER_IF(1) | 660 AT91_XDMAC_DT_PERID(15))>; 661 dma-names = "tx", "rx"; 662 atmel,fifo-size = <16>; 663 status = "disabled"; 664 }; 665 }; 666 667 flx8: flexcom@f8018000 { 668 compatible = "atmel,sama5d2-flexcom"; 669 reg = <0xf8018000 0x200>; 670 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; 671 #address-cells = <1>; 672 #size-cells = <1>; 673 ranges = <0x0 0xf8018000 0x800>; 674 status = "disabled"; 675 676 uart8: serial@200 { 677 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 678 reg = <0x200 0x200>; 679 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; 680 dmas = <&dma0 681 (AT91_XDMAC_DT_MEM_IF(0) | 682 AT91_XDMAC_DT_PER_IF(1) | 683 AT91_XDMAC_DT_PERID(16))>, 684 <&dma0 685 (AT91_XDMAC_DT_MEM_IF(0) | 686 AT91_XDMAC_DT_PER_IF(1) | 687 AT91_XDMAC_DT_PERID(17))>; 688 dma-names = "tx", "rx"; 689 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; 690 clock-names = "usart"; 691 atmel,use-dma-rx; 692 atmel,use-dma-tx; 693 atmel,fifo-size = <16>; 694 status = "disabled"; 695 }; 696 697 i2c8: i2c@600 { 698 compatible = "microchip,sam9x60-i2c"; 699 reg = <0x600 0x200>; 700 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; 701 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; 702 dmas = <&dma0 703 (AT91_XDMAC_DT_MEM_IF(0) | 704 AT91_XDMAC_DT_PER_IF(1) | 705 AT91_XDMAC_DT_PERID(16))>, 706 <&dma0 707 (AT91_XDMAC_DT_MEM_IF(0) | 708 AT91_XDMAC_DT_PER_IF(1) | 709 AT91_XDMAC_DT_PERID(17))>; 710 dma-names = "tx", "rx"; 711 atmel,fifo-size = <16>; 712 status = "disabled"; 713 }; 714 }; 715 716 flx0: flexcom@f801c000 { 717 compatible = "atmel,sama5d2-flexcom"; 718 reg = <0xf801c000 0x200>; 719 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; 720 #address-cells = <1>; 721 #size-cells = <1>; 722 ranges = <0x0 0xf801c000 0x800>; 723 status = "disabled"; 724 725 uart0: serial@200 { 726 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 727 reg = <0x200 0x200>; 728 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; 729 dmas = <&dma0 730 (AT91_XDMAC_DT_MEM_IF(0) | 731 AT91_XDMAC_DT_PER_IF(1) | 732 AT91_XDMAC_DT_PERID(0))>, 733 <&dma0 734 (AT91_XDMAC_DT_MEM_IF(0) | 735 AT91_XDMAC_DT_PER_IF(1) | 736 AT91_XDMAC_DT_PERID(1))>; 737 dma-names = "tx", "rx"; 738 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; 739 clock-names = "usart"; 740 atmel,use-dma-rx; 741 atmel,use-dma-tx; 742 atmel,fifo-size = <16>; 743 status = "disabled"; 744 }; 745 746 spi0: spi@400 { 747 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 748 reg = <0x400 0x200>; 749 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; 750 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; 751 clock-names = "spi_clk"; 752 dmas = <&dma0 753 (AT91_XDMAC_DT_MEM_IF(0) | 754 AT91_XDMAC_DT_PER_IF(1) | 755 AT91_XDMAC_DT_PERID(0))>, 756 <&dma0 757 (AT91_XDMAC_DT_MEM_IF(0) | 758 AT91_XDMAC_DT_PER_IF(1) | 759 AT91_XDMAC_DT_PERID(1))>; 760 dma-names = "tx", "rx"; 761 atmel,fifo-size = <16>; 762 status = "disabled"; 763 }; 764 765 i2c0: i2c@600 { 766 compatible = "microchip,sam9x60-i2c"; 767 reg = <0x600 0x200>; 768 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; 769 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; 770 dmas = <&dma0 771 (AT91_XDMAC_DT_MEM_IF(0) | 772 AT91_XDMAC_DT_PER_IF(1) | 773 AT91_XDMAC_DT_PERID(0))>, 774 <&dma0 775 (AT91_XDMAC_DT_MEM_IF(0) | 776 AT91_XDMAC_DT_PER_IF(1) | 777 AT91_XDMAC_DT_PERID(1))>; 778 dma-names = "tx", "rx"; 779 atmel,fifo-size = <16>; 780 status = "disabled"; 781 }; 782 }; 783 784 flx1: flexcom@f8020000 { 785 compatible = "atmel,sama5d2-flexcom"; 786 reg = <0xf8020000 0x200>; 787 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; 788 #address-cells = <1>; 789 #size-cells = <1>; 790 ranges = <0x0 0xf8020000 0x800>; 791 status = "disabled"; 792 793 uart1: serial@200 { 794 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 795 reg = <0x200 0x200>; 796 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; 797 dmas = <&dma0 798 (AT91_XDMAC_DT_MEM_IF(0) | 799 AT91_XDMAC_DT_PER_IF(1) | 800 AT91_XDMAC_DT_PERID(2))>, 801 <&dma0 802 (AT91_XDMAC_DT_MEM_IF(0) | 803 AT91_XDMAC_DT_PER_IF(1) | 804 AT91_XDMAC_DT_PERID(3))>; 805 dma-names = "tx", "rx"; 806 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; 807 clock-names = "usart"; 808 atmel,use-dma-rx; 809 atmel,use-dma-tx; 810 atmel,fifo-size = <16>; 811 status = "disabled"; 812 }; 813 814 spi1: spi@400 { 815 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 816 reg = <0x400 0x200>; 817 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; 818 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; 819 clock-names = "spi_clk"; 820 dmas = <&dma0 821 (AT91_XDMAC_DT_MEM_IF(0) | 822 AT91_XDMAC_DT_PER_IF(1) | 823 AT91_XDMAC_DT_PERID(2))>, 824 <&dma0 825 (AT91_XDMAC_DT_MEM_IF(0) | 826 AT91_XDMAC_DT_PER_IF(1) | 827 AT91_XDMAC_DT_PERID(3))>; 828 dma-names = "tx", "rx"; 829 atmel,fifo-size = <16>; 830 status = "disabled"; 831 }; 832 833 i2c1: i2c@600 { 834 compatible = "microchip,sam9x60-i2c"; 835 reg = <0x600 0x200>; 836 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; 837 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; 838 dmas = <&dma0 839 (AT91_XDMAC_DT_MEM_IF(0) | 840 AT91_XDMAC_DT_PER_IF(1) | 841 AT91_XDMAC_DT_PERID(2))>, 842 <&dma0 843 (AT91_XDMAC_DT_MEM_IF(0) | 844 AT91_XDMAC_DT_PER_IF(1) | 845 AT91_XDMAC_DT_PERID(3))>; 846 dma-names = "tx", "rx"; 847 atmel,fifo-size = <16>; 848 status = "disabled"; 849 }; 850 }; 851 852 flx2: flexcom@f8024000 { 853 compatible = "atmel,sama5d2-flexcom"; 854 reg = <0xf8024000 0x200>; 855 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; 856 #address-cells = <1>; 857 #size-cells = <1>; 858 ranges = <0x0 0xf8024000 0x800>; 859 status = "disabled"; 860 861 uart2: serial@200 { 862 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 863 reg = <0x200 0x200>; 864 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; 865 dmas = <&dma0 866 (AT91_XDMAC_DT_MEM_IF(0) | 867 AT91_XDMAC_DT_PER_IF(1) | 868 AT91_XDMAC_DT_PERID(4))>, 869 <&dma0 870 (AT91_XDMAC_DT_MEM_IF(0) | 871 AT91_XDMAC_DT_PER_IF(1) | 872 AT91_XDMAC_DT_PERID(5))>; 873 dma-names = "tx", "rx"; 874 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; 875 clock-names = "usart"; 876 atmel,use-dma-rx; 877 atmel,use-dma-tx; 878 atmel,fifo-size = <16>; 879 status = "disabled"; 880 }; 881 882 spi2: spi@400 { 883 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 884 reg = <0x400 0x200>; 885 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; 886 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; 887 clock-names = "spi_clk"; 888 dmas = <&dma0 889 (AT91_XDMAC_DT_MEM_IF(0) | 890 AT91_XDMAC_DT_PER_IF(1) | 891 AT91_XDMAC_DT_PERID(4))>, 892 <&dma0 893 (AT91_XDMAC_DT_MEM_IF(0) | 894 AT91_XDMAC_DT_PER_IF(1) | 895 AT91_XDMAC_DT_PERID(5))>; 896 dma-names = "tx", "rx"; 897 atmel,fifo-size = <16>; 898 status = "disabled"; 899 }; 900 901 i2c2: i2c@600 { 902 compatible = "microchip,sam9x60-i2c"; 903 reg = <0x600 0x200>; 904 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; 905 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; 906 dmas = <&dma0 907 (AT91_XDMAC_DT_MEM_IF(0) | 908 AT91_XDMAC_DT_PER_IF(1) | 909 AT91_XDMAC_DT_PERID(4))>, 910 <&dma0 911 (AT91_XDMAC_DT_MEM_IF(0) | 912 AT91_XDMAC_DT_PER_IF(1) | 913 AT91_XDMAC_DT_PERID(5))>; 914 dma-names = "tx", "rx"; 915 atmel,fifo-size = <16>; 916 status = "disabled"; 917 }; 918 }; 919 920 flx3: flexcom@f8028000 { 921 compatible = "atmel,sama5d2-flexcom"; 922 reg = <0xf8028000 0x200>; 923 clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; 924 #address-cells = <1>; 925 #size-cells = <1>; 926 ranges = <0x0 0xf8028000 0x800>; 927 status = "disabled"; 928 929 uart3: serial@200 { 930 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 931 reg = <0x200 0x200>; 932 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; 933 dmas = <&dma0 934 (AT91_XDMAC_DT_MEM_IF(0) | 935 AT91_XDMAC_DT_PER_IF(1) | 936 AT91_XDMAC_DT_PERID(6))>, 937 <&dma0 938 (AT91_XDMAC_DT_MEM_IF(0) | 939 AT91_XDMAC_DT_PER_IF(1) | 940 AT91_XDMAC_DT_PERID(7))>; 941 dma-names = "tx", "rx"; 942 clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; 943 clock-names = "usart"; 944 atmel,use-dma-rx; 945 atmel,use-dma-tx; 946 atmel,fifo-size = <16>; 947 status = "disabled"; 948 }; 949 950 spi3: spi@400 { 951 compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; 952 reg = <0x400 0x200>; 953 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; 954 clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; 955 clock-names = "spi_clk"; 956 dmas = <&dma0 957 (AT91_XDMAC_DT_MEM_IF(0) | 958 AT91_XDMAC_DT_PER_IF(1) | 959 AT91_XDMAC_DT_PERID(6))>, 960 <&dma0 961 (AT91_XDMAC_DT_MEM_IF(0) | 962 AT91_XDMAC_DT_PER_IF(1) | 963 AT91_XDMAC_DT_PERID(7))>; 964 dma-names = "tx", "rx"; 965 atmel,fifo-size = <16>; 966 status = "disabled"; 967 }; 968 969 i2c3: i2c@600 { 970 compatible = "microchip,sam9x60-i2c"; 971 reg = <0x600 0x200>; 972 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; 973 clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; 974 dmas = <&dma0 975 (AT91_XDMAC_DT_MEM_IF(0) | 976 AT91_XDMAC_DT_PER_IF(1) | 977 AT91_XDMAC_DT_PERID(6))>, 978 <&dma0 979 (AT91_XDMAC_DT_MEM_IF(0) | 980 AT91_XDMAC_DT_PER_IF(1) | 981 AT91_XDMAC_DT_PERID(7))>; 982 dma-names = "tx", "rx"; 983 atmel,fifo-size = <16>; 984 status = "disabled"; 985 }; 986 }; 987 988 macb0: ethernet@f802c000 { 989 compatible = "cdns,sam9x60-macb", "cdns,macb"; 990 reg = <0xf802c000 0x1000>; 991 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; 992 clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; 993 clock-names = "hclk", "pclk"; 994 status = "disabled"; 995 }; 996 997 macb1: ethernet@f8030000 { 998 compatible = "cdns,sam9x60-macb", "cdns,macb"; 999 reg = <0xf8030000 0x1000>; 1000 interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; 1001 clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; 1002 clock-names = "hclk", "pclk"; 1003 status = "disabled"; 1004 }; 1005 1006 pwm0: pwm@f8034000 { 1007 compatible = "microchip,sam9x60-pwm"; 1008 reg = <0xf8034000 0x300>; 1009 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; 1010 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; 1011 #pwm-cells = <3>; 1012 status = "disabled"; 1013 }; 1014 1015 hlcdc: hlcdc@f8038000 { 1016 compatible = "microchip,sam9x60-hlcdc"; 1017 reg = <0xf8038000 0x4000>; 1018 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; 1019 clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; 1020 clock-names = "periph_clk","sys_clk", "slow_clk"; 1021 assigned-clocks = <&pmc PMC_TYPE_GCK 25>; 1022 assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>; 1023 status = "disabled"; 1024 1025 hlcdc-display-controller { 1026 compatible = "atmel,hlcdc-display-controller"; 1027 #address-cells = <1>; 1028 #size-cells = <0>; 1029 1030 port@0 { 1031 #address-cells = <1>; 1032 #size-cells = <0>; 1033 reg = <0>; 1034 }; 1035 }; 1036 1037 hlcdc_pwm: hlcdc-pwm { 1038 compatible = "atmel,hlcdc-pwm"; 1039 #pwm-cells = <3>; 1040 }; 1041 }; 1042 1043 flx9: flexcom@f8040000 { 1044 compatible = "atmel,sama5d2-flexcom"; 1045 reg = <0xf8040000 0x200>; 1046 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; 1047 #address-cells = <1>; 1048 #size-cells = <1>; 1049 ranges = <0x0 0xf8040000 0x800>; 1050 status = "disabled"; 1051 1052 uart9: serial@200 { 1053 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 1054 reg = <0x200 0x200>; 1055 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; 1056 dmas = <&dma0 1057 (AT91_XDMAC_DT_MEM_IF(0) | 1058 AT91_XDMAC_DT_PER_IF(1) | 1059 AT91_XDMAC_DT_PERID(18))>, 1060 <&dma0 1061 (AT91_XDMAC_DT_MEM_IF(0) | 1062 AT91_XDMAC_DT_PER_IF(1) | 1063 AT91_XDMAC_DT_PERID(19))>; 1064 dma-names = "tx", "rx"; 1065 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; 1066 clock-names = "usart"; 1067 atmel,use-dma-rx; 1068 atmel,use-dma-tx; 1069 atmel,fifo-size = <16>; 1070 status = "disabled"; 1071 }; 1072 1073 i2c9: i2c@600 { 1074 compatible = "microchip,sam9x60-i2c"; 1075 reg = <0x600 0x200>; 1076 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; 1077 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; 1078 dmas = <&dma0 1079 (AT91_XDMAC_DT_MEM_IF(0) | 1080 AT91_XDMAC_DT_PER_IF(1) | 1081 AT91_XDMAC_DT_PERID(18))>, 1082 <&dma0 1083 (AT91_XDMAC_DT_MEM_IF(0) | 1084 AT91_XDMAC_DT_PER_IF(1) | 1085 AT91_XDMAC_DT_PERID(19))>; 1086 dma-names = "tx", "rx"; 1087 atmel,fifo-size = <16>; 1088 status = "disabled"; 1089 }; 1090 }; 1091 1092 flx10: flexcom@f8044000 { 1093 compatible = "atmel,sama5d2-flexcom"; 1094 reg = <0xf8044000 0x200>; 1095 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; 1096 #address-cells = <1>; 1097 #size-cells = <1>; 1098 ranges = <0x0 0xf8044000 0x800>; 1099 status = "disabled"; 1100 1101 uart10: serial@200 { 1102 compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; 1103 reg = <0x200 0x200>; 1104 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; 1105 dmas = <&dma0 1106 (AT91_XDMAC_DT_MEM_IF(0) | 1107 AT91_XDMAC_DT_PER_IF(1) | 1108 AT91_XDMAC_DT_PERID(20))>, 1109 <&dma0 1110 (AT91_XDMAC_DT_MEM_IF(0) | 1111 AT91_XDMAC_DT_PER_IF(1) | 1112 AT91_XDMAC_DT_PERID(21))>; 1113 dma-names = "tx", "rx"; 1114 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; 1115 clock-names = "usart"; 1116 atmel,use-dma-rx; 1117 atmel,use-dma-tx; 1118 atmel,fifo-size = <16>; 1119 status = "disabled"; 1120 }; 1121 1122 i2c10: i2c@600 { 1123 compatible = "microchip,sam9x60-i2c"; 1124 reg = <0x600 0x200>; 1125 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; 1126 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; 1127 dmas = <&dma0 1128 (AT91_XDMAC_DT_MEM_IF(0) | 1129 AT91_XDMAC_DT_PER_IF(1) | 1130 AT91_XDMAC_DT_PERID(20))>, 1131 <&dma0 1132 (AT91_XDMAC_DT_MEM_IF(0) | 1133 AT91_XDMAC_DT_PER_IF(1) | 1134 AT91_XDMAC_DT_PERID(21))>; 1135 dma-names = "tx", "rx"; 1136 atmel,fifo-size = <16>; 1137 status = "disabled"; 1138 }; 1139 }; 1140 1141 isi: isi@f8048000 { 1142 compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi"; 1143 reg = <0xf8048000 0x100>; 1144 interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>; 1145 clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; 1146 clock-names = "isi_clk"; 1147 status = "disabled"; 1148 port { 1149 #address-cells = <1>; 1150 #size-cells = <0>; 1151 }; 1152 }; 1153 1154 adc: adc@f804c000 { 1155 compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc"; 1156 reg = <0xf804c000 0x100>; 1157 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; 1158 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; 1159 clock-names = "adc_clk"; 1160 dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; 1161 dma-names = "rx"; 1162 atmel,min-sample-rate-hz = <200000>; 1163 atmel,max-sample-rate-hz = <20000000>; 1164 atmel,startup-time-ms = <4>; 1165 atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; 1166 #io-channel-cells = <1>; 1167 status = "disabled"; 1168 }; 1169 1170 sfr: sfr@f8050000 { 1171 compatible = "microchip,sam9x60-sfr", "syscon"; 1172 reg = <0xf8050000 0x100>; 1173 }; 1174 1175 matrix: matrix@ffffde00 { 1176 compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; 1177 reg = <0xffffde00 0x200>; 1178 }; 1179 1180 pmecc: ecc-engine@ffffe000 { 1181 compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; 1182 reg = <0xffffe000 0x300>, 1183 <0xffffe600 0x100>; 1184 }; 1185 1186 mpddrc: mpddrc@ffffe800 { 1187 compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; 1188 reg = <0xffffe800 0x200>; 1189 clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; 1190 clock-names = "ddrck", "mpddr"; 1191 }; 1192 1193 smc: smc@ffffea00 { 1194 compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; 1195 reg = <0xffffea00 0x100>; 1196 }; 1197 1198 aic: interrupt-controller@fffff100 { 1199 compatible = "microchip,sam9x60-aic"; 1200 #interrupt-cells = <3>; 1201 interrupt-controller; 1202 reg = <0xfffff100 0x100>; 1203 atmel,external-irqs = <31>; 1204 }; 1205 1206 dbgu: serial@fffff200 { 1207 compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; 1208 reg = <0xfffff200 0x200>; 1209 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 1210 interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; 1211 dmas = <&dma0 1212 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 1213 AT91_XDMAC_DT_PERID(28))>, 1214 <&dma0 1215 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | 1216 AT91_XDMAC_DT_PERID(29))>; 1217 dma-names = "tx", "rx"; 1218 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; 1219 clock-names = "usart"; 1220 status = "disabled"; 1221 }; 1222 1223 pinctrl: pinctrl@fffff400 { 1224 #address-cells = <1>; 1225 #size-cells = <1>; 1226 compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; 1227 ranges = <0xfffff400 0xfffff400 0x800>; 1228 1229 /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ 1230 atmel,mux-mask = < 1231 /* A B C */ 1232 0xffffffff 0xffe03fff 0xef00019d /* pioA */ 1233 0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ 1234 0xffffffff 0xffffffff 0xf83fffff /* pioC */ 1235 0x003fffff 0x003f8000 0x00000000 /* pioD */ 1236 >; 1237 1238 pioA: gpio@fffff400 { 1239 compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 1240 reg = <0xfffff400 0x200>; 1241 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; 1242 #gpio-cells = <2>; 1243 gpio-controller; 1244 interrupt-controller; 1245 #interrupt-cells = <2>; 1246 clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; 1247 }; 1248 1249 pioB: gpio@fffff600 { 1250 compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 1251 reg = <0xfffff600 0x200>; 1252 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; 1253 #gpio-cells = <2>; 1254 gpio-controller; 1255 #gpio-lines = <26>; 1256 interrupt-controller; 1257 #interrupt-cells = <2>; 1258 clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; 1259 }; 1260 1261 pioC: gpio@fffff800 { 1262 compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 1263 reg = <0xfffff800 0x200>; 1264 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; 1265 #gpio-cells = <2>; 1266 gpio-controller; 1267 interrupt-controller; 1268 #interrupt-cells = <2>; 1269 clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; 1270 }; 1271 1272 pioD: gpio@fffffa00 { 1273 compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 1274 reg = <0xfffffa00 0x200>; 1275 interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; 1276 #gpio-cells = <2>; 1277 gpio-controller; 1278 #gpio-lines = <22>; 1279 interrupt-controller; 1280 #interrupt-cells = <2>; 1281 clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; 1282 }; 1283 }; 1284 1285 pmc: clock-controller@fffffc00 { 1286 compatible = "microchip,sam9x60-pmc", "syscon"; 1287 reg = <0xfffffc00 0x200>; 1288 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 1289 #clock-cells = <2>; 1290 clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; 1291 clock-names = "td_slck", "md_slck", "main_xtal"; 1292 }; 1293 1294 reset_controller: reset-controller@fffffe00 { 1295 compatible = "microchip,sam9x60-rstc"; 1296 reg = <0xfffffe00 0x10>; 1297 clocks = <&clk32k 0>; 1298 }; 1299 1300 shutdown_controller: poweroff@fffffe10 { 1301 compatible = "microchip,sam9x60-shdwc"; 1302 reg = <0xfffffe10 0x10>; 1303 clocks = <&clk32k 0>; 1304 #address-cells = <1>; 1305 #size-cells = <0>; 1306 atmel,wakeup-rtc-timer; 1307 atmel,wakeup-rtt-timer; 1308 status = "disabled"; 1309 }; 1310 1311 rtt: rtc@fffffe20 { 1312 compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; 1313 reg = <0xfffffe20 0x20>; 1314 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 1315 clocks = <&clk32k 0>; 1316 }; 1317 1318 pit: timer@fffffe40 { 1319 compatible = "atmel,at91sam9260-pit"; 1320 reg = <0xfffffe40 0x10>; 1321 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 1322 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; 1323 }; 1324 1325 clk32k: clock-controller@fffffe50 { 1326 compatible = "microchip,sam9x60-sckc"; 1327 reg = <0xfffffe50 0x4>; 1328 clocks = <&slow_xtal>; 1329 #clock-cells = <1>; 1330 }; 1331 1332 gpbr: syscon@fffffe60 { 1333 compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; 1334 reg = <0xfffffe60 0x10>; 1335 }; 1336 1337 rtc: rtc@fffffea8 { 1338 compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; 1339 reg = <0xfffffea8 0x100>; 1340 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 1341 clocks = <&clk32k 0>; 1342 }; 1343 1344 watchdog: watchdog@ffffff80 { 1345 compatible = "microchip,sam9x60-wdt"; 1346 reg = <0xffffff80 0x24>; 1347 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 1348 clocks = <&clk32k 0>; 1349 status = "disabled"; 1350 }; 1351 }; 1352 }; 1353}; 1354