xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11	/* these are used by bootloader for disabling nodes */
12	aliases {
13		led0 = &led0;
14		led1 = &led1;
15		led2 = &led2;
16		nand = &gpmi;
17		ssi0 = &ssi1;
18		usb0 = &usbh1;
19		usb1 = &usbotg;
20	};
21
22	chosen {
23		bootargs = "console=ttymxc1,115200";
24	};
25
26	backlight {
27		compatible = "pwm-backlight";
28		pwms = <&pwm4 0 5000000>;
29		brightness-levels = <0 4 8 16 32 64 128 255>;
30		default-brightness-level = <7>;
31	};
32
33	gpio-keys {
34		compatible = "gpio-keys";
35
36		user-pb {
37			label = "user_pb";
38			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
39			linux,code = <BTN_0>;
40		};
41
42		user-pb1x {
43			label = "user_pb1x";
44			linux,code = <BTN_1>;
45			interrupt-parent = <&gsc>;
46			interrupts = <0>;
47		};
48
49		key-erased {
50			label = "key-erased";
51			linux,code = <BTN_2>;
52			interrupt-parent = <&gsc>;
53			interrupts = <1>;
54		};
55
56		eeprom-wp {
57			label = "eeprom_wp";
58			linux,code = <BTN_3>;
59			interrupt-parent = <&gsc>;
60			interrupts = <2>;
61		};
62
63		tamper {
64			label = "tamper";
65			linux,code = <BTN_4>;
66			interrupt-parent = <&gsc>;
67			interrupts = <5>;
68		};
69
70		switch-hold {
71			label = "switch_hold";
72			linux,code = <BTN_5>;
73			interrupt-parent = <&gsc>;
74			interrupts = <7>;
75		};
76	};
77
78	leds {
79		compatible = "gpio-leds";
80		pinctrl-names = "default";
81		pinctrl-0 = <&pinctrl_gpio_leds>;
82
83		led0: led-user1 {
84			label = "user1";
85			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
86			default-state = "on";
87			linux,default-trigger = "heartbeat";
88		};
89
90		led1: led-user2 {
91			label = "user2";
92			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
93			default-state = "off";
94		};
95
96		led2: led-user3 {
97			label = "user3";
98			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
99			default-state = "off";
100		};
101	};
102
103	memory@10000000 {
104		device_type = "memory";
105		reg = <0x10000000 0x40000000>;
106	};
107
108	pps {
109		compatible = "pps-gpio";
110		pinctrl-names = "default";
111		pinctrl-0 = <&pinctrl_pps>;
112		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
113		status = "okay";
114	};
115
116	reg_1p0v: regulator-1p0v {
117		compatible = "regulator-fixed";
118		regulator-name = "1P0V";
119		regulator-min-microvolt = <1000000>;
120		regulator-max-microvolt = <1000000>;
121		regulator-always-on;
122	};
123
124	reg_3p3v: regulator-3p3v {
125		compatible = "regulator-fixed";
126		regulator-name = "3P3V";
127		regulator-min-microvolt = <3300000>;
128		regulator-max-microvolt = <3300000>;
129		regulator-always-on;
130	};
131
132	reg_can1_stby: regulator-can1-stby {
133		compatible = "regulator-fixed";
134		pinctrl-names = "default";
135		pinctrl-0 = <&pinctrl_reg_can1>;
136		regulator-name = "can1_stby";
137		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
138		regulator-min-microvolt = <3300000>;
139		regulator-max-microvolt = <3300000>;
140	};
141
142	reg_usb_h1_vbus: regulator-usb-h1-vbus {
143		compatible = "regulator-fixed";
144		regulator-name = "usb_h1_vbus";
145		regulator-min-microvolt = <5000000>;
146		regulator-max-microvolt = <5000000>;
147		regulator-always-on;
148	};
149
150	reg_usb_otg_vbus: regulator-usb-otg-vbus {
151		compatible = "regulator-fixed";
152		regulator-name = "usb_otg_vbus";
153		regulator-min-microvolt = <5000000>;
154		regulator-max-microvolt = <5000000>;
155		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
156		enable-active-high;
157	};
158
159	sound {
160		compatible = "fsl,imx6q-ventana-sgtl5000",
161			     "fsl,imx-audio-sgtl5000";
162		model = "sgtl5000-audio";
163		ssi-controller = <&ssi1>;
164		audio-codec = <&codec>;
165		audio-routing =
166			"MIC_IN", "Mic Jack",
167			"Mic Jack", "Mic Bias",
168			"Headphone Jack", "HP_OUT";
169		mux-int-port = <1>;
170		mux-ext-port = <4>;
171	};
172};
173
174&audmux {
175	pinctrl-names = "default";
176	pinctrl-0 = <&pinctrl_audmux>;
177	status = "okay";
178};
179
180&can1 {
181	pinctrl-names = "default";
182	pinctrl-0 = <&pinctrl_flexcan1>;
183	xceiver-supply = <&reg_can1_stby>;
184	status = "okay";
185};
186
187&clks {
188	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
189			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
190	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
191				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
192};
193
194&fec {
195	pinctrl-names = "default";
196	pinctrl-0 = <&pinctrl_enet>;
197	phy-mode = "rgmii-id";
198	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
199	status = "okay";
200};
201
202&gpmi {
203	pinctrl-names = "default";
204	pinctrl-0 = <&pinctrl_gpmi_nand>;
205	status = "okay";
206};
207
208&hdmi {
209	ddc-i2c-bus = <&i2c3>;
210	status = "okay";
211};
212
213&i2c1 {
214	clock-frequency = <100000>;
215	pinctrl-names = "default";
216	pinctrl-0 = <&pinctrl_i2c1>;
217	status = "okay";
218
219	gsc: gsc@20 {
220		compatible = "gw,gsc";
221		reg = <0x20>;
222		interrupt-parent = <&gpio1>;
223		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
224		interrupt-controller;
225		#interrupt-cells = <1>;
226		#size-cells = <0>;
227
228		adc {
229			compatible = "gw,gsc-adc";
230			#address-cells = <1>;
231			#size-cells = <0>;
232
233			channel@0 {
234				gw,mode = <0>;
235				reg = <0x00>;
236				label = "temp";
237			};
238
239			channel@2 {
240				gw,mode = <1>;
241				reg = <0x02>;
242				label = "vdd_vin";
243			};
244
245			channel@5 {
246				gw,mode = <1>;
247				reg = <0x05>;
248				label = "vdd_3p3";
249			};
250
251			channel@8 {
252				gw,mode = <1>;
253				reg = <0x08>;
254				label = "vdd_bat";
255			};
256
257			channel@b {
258				gw,mode = <1>;
259				reg = <0x0b>;
260				label = "vdd_5p0";
261			};
262
263			channel@e {
264				gw,mode = <1>;
265				reg = <0xe>;
266				label = "vdd_arm";
267			};
268
269			channel@11 {
270				gw,mode = <1>;
271				reg = <0x11>;
272				label = "vdd_soc";
273			};
274
275			channel@14 {
276				gw,mode = <1>;
277				reg = <0x14>;
278				label = "vdd_3p0";
279			};
280
281			channel@17 {
282				gw,mode = <1>;
283				reg = <0x17>;
284				label = "vdd_1p5";
285			};
286
287			channel@1d {
288				gw,mode = <1>;
289				reg = <0x1d>;
290				label = "vdd_1p8";
291			};
292
293			channel@20 {
294				gw,mode = <1>;
295				reg = <0x20>;
296				label = "vdd_1p0";
297			};
298
299			channel@23 {
300				gw,mode = <1>;
301				reg = <0x23>;
302				label = "vdd_2p5";
303			};
304
305			channel@26 {
306				gw,mode = <1>;
307				reg = <0x26>;
308				label = "vdd_gps";
309			};
310
311			channel@29 {
312				gw,mode = <1>;
313				reg = <0x29>;
314				label = "vdd_an1";
315			};
316		};
317	};
318
319	gsc_gpio: gpio@23 {
320		compatible = "nxp,pca9555";
321		reg = <0x23>;
322		gpio-controller;
323		#gpio-cells = <2>;
324		interrupt-parent = <&gsc>;
325		interrupts = <4>;
326	};
327
328	eeprom1: eeprom@50 {
329		compatible = "atmel,24c02";
330		reg = <0x50>;
331		pagesize = <16>;
332	};
333
334	eeprom2: eeprom@51 {
335		compatible = "atmel,24c02";
336		reg = <0x51>;
337		pagesize = <16>;
338	};
339
340	eeprom3: eeprom@52 {
341		compatible = "atmel,24c02";
342		reg = <0x52>;
343		pagesize = <16>;
344	};
345
346	eeprom4: eeprom@53 {
347		compatible = "atmel,24c02";
348		reg = <0x53>;
349		pagesize = <16>;
350	};
351
352	rtc: ds1672@68 {
353		compatible = "dallas,ds1672";
354		reg = <0x68>;
355	};
356};
357
358&i2c2 {
359	clock-frequency = <100000>;
360	pinctrl-names = "default";
361	pinctrl-0 = <&pinctrl_i2c2>;
362	status = "okay";
363
364	ltc3676: pmic@3c {
365		compatible = "lltc,ltc3676";
366		reg = <0x3c>;
367		interrupt-parent = <&gpio1>;
368		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
369
370		regulators {
371			/* VDD_SOC (1+R1/R2 = 1.635) */
372			reg_vdd_soc: sw1 {
373				regulator-name = "vddsoc";
374				regulator-min-microvolt = <674400>;
375				regulator-max-microvolt = <1308000>;
376				lltc,fb-voltage-divider = <127000 200000>;
377				regulator-ramp-delay = <7000>;
378				regulator-boot-on;
379				regulator-always-on;
380			};
381
382			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
383			reg_1p8v: sw2 {
384				regulator-name = "vdd1p8";
385				regulator-min-microvolt = <1033310>;
386				regulator-max-microvolt = <2004000>;
387				lltc,fb-voltage-divider = <301000 200000>;
388				regulator-ramp-delay = <7000>;
389				regulator-boot-on;
390				regulator-always-on;
391			};
392
393			/* VDD_ARM (1+R1/R2 = 1.635) */
394			reg_vdd_arm: sw3 {
395				regulator-name = "vddarm";
396				regulator-min-microvolt = <674400>;
397				regulator-max-microvolt = <1308000>;
398				lltc,fb-voltage-divider = <127000 200000>;
399				regulator-ramp-delay = <7000>;
400				regulator-boot-on;
401				regulator-always-on;
402			};
403
404			/* VDD_DDR (1+R1/R2 = 2.105) */
405			reg_vdd_ddr: sw4 {
406				regulator-name = "vddddr";
407				regulator-min-microvolt = <868310>;
408				regulator-max-microvolt = <1684000>;
409				lltc,fb-voltage-divider = <221000 200000>;
410				regulator-ramp-delay = <7000>;
411				regulator-boot-on;
412				regulator-always-on;
413			};
414
415			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
416			reg_2p5v: ldo2 {
417				regulator-name = "vdd2p5";
418				regulator-min-microvolt = <2490375>;
419				regulator-max-microvolt = <2490375>;
420				lltc,fb-voltage-divider = <487000 200000>;
421				regulator-boot-on;
422				regulator-always-on;
423			};
424
425			/* VDD_AUD_1P8: Audio codec */
426			reg_aud_1p8v: ldo3 {
427				regulator-name = "vdd1p8a";
428				regulator-min-microvolt = <1800000>;
429				regulator-max-microvolt = <1800000>;
430				regulator-boot-on;
431			};
432
433			/* VDD_HIGH (1+R1/R2 = 4.17) */
434			reg_3p0v: ldo4 {
435				regulator-name = "vdd3p0";
436				regulator-min-microvolt = <3023250>;
437				regulator-max-microvolt = <3023250>;
438				lltc,fb-voltage-divider = <634000 200000>;
439				regulator-boot-on;
440				regulator-always-on;
441			};
442		};
443	};
444};
445
446&i2c3 {
447	clock-frequency = <100000>;
448	pinctrl-names = "default";
449	pinctrl-0 = <&pinctrl_i2c3>;
450	status = "okay";
451
452	codec: sgtl5000@a {
453		compatible = "fsl,sgtl5000";
454		reg = <0x0a>;
455		#sound-dai-cells = <0>;
456		clocks = <&clks IMX6QDL_CLK_CKO>;
457		VDDA-supply = <&reg_1p8v>;
458		VDDIO-supply = <&reg_3p3v>;
459	};
460
461	touchscreen: egalax_ts@4 {
462		compatible = "eeti,egalax_ts";
463		reg = <0x04>;
464		interrupt-parent = <&gpio1>;
465		interrupts = <11 2>;
466		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
467	};
468
469	accel@1e {
470		compatible = "nxp,fxos8700";
471		reg = <0x1e>;
472	};
473};
474
475&ldb {
476	status = "okay";
477
478	lvds-channel@0 {
479		fsl,data-mapping = "spwg";
480		fsl,data-width = <18>;
481		status = "okay";
482
483		display-timings {
484			native-mode = <&timing0>;
485			timing0: hsd100pxn1 {
486				clock-frequency = <65000000>;
487				hactive = <1024>;
488				vactive = <768>;
489				hback-porch = <220>;
490				hfront-porch = <40>;
491				vback-porch = <21>;
492				vfront-porch = <7>;
493				hsync-len = <60>;
494				vsync-len = <10>;
495			};
496		};
497	};
498};
499
500&pcie {
501	pinctrl-names = "default";
502	pinctrl-0 = <&pinctrl_pcie>;
503	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
504	status = "okay";
505};
506
507&pwm2 {
508	pinctrl-names = "default";
509	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
510	status = "disabled";
511};
512
513&pwm3 {
514	pinctrl-names = "default";
515	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
516	status = "disabled";
517};
518
519&pwm4 {
520	#pwm-cells = <2>;
521	pinctrl-names = "default";
522	pinctrl-0 = <&pinctrl_pwm4>;
523	status = "okay";
524};
525
526&ssi1 {
527	status = "okay";
528};
529
530&uart1 {
531	pinctrl-names = "default";
532	pinctrl-0 = <&pinctrl_uart1>;
533	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
534	status = "okay";
535};
536
537&uart2 {
538	pinctrl-names = "default";
539	pinctrl-0 = <&pinctrl_uart2>;
540	status = "okay";
541};
542
543&uart5 {
544	pinctrl-names = "default";
545	pinctrl-0 = <&pinctrl_uart5>;
546	status = "okay";
547};
548
549&usbotg {
550	vbus-supply = <&reg_usb_otg_vbus>;
551	pinctrl-names = "default";
552	pinctrl-0 = <&pinctrl_usbotg>;
553	disable-over-current;
554	status = "okay";
555};
556
557&usbh1 {
558	vbus-supply = <&reg_usb_h1_vbus>;
559	status = "okay";
560};
561
562&usdhc3 {
563	pinctrl-names = "default", "state_100mhz", "state_200mhz";
564	pinctrl-0 = <&pinctrl_usdhc3>;
565	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
566	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
567	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
568	vmmc-supply = <&reg_3p3v>;
569	no-1-8-v; /* firmware will remove if board revision supports */
570	status = "okay";
571};
572
573&wdog1 {
574	pinctrl-names = "default";
575	pinctrl-0 = <&pinctrl_wdog>;
576	fsl,ext-reset-output;
577};
578
579&iomuxc {
580	pinctrl_audmux: audmuxgrp {
581		fsl,pins = <
582			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
583			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
584			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
585			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
586			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
587		>;
588	};
589
590	pinctrl_enet: enetgrp {
591		fsl,pins = <
592			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
593			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
594			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
595			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
596			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
597			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
598			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
599			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
600			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
601			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
602			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
603			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
604			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
605			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
606			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
607			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
608		>;
609	};
610
611	pinctrl_flexcan1: flexcan1grp {
612		fsl,pins = <
613			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
614			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
615		>;
616	};
617
618	pinctrl_gpio_leds: gpioledsgrp {
619		fsl,pins = <
620			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
621			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
622			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
623		>;
624	};
625
626	pinctrl_gpmi_nand: gpminandgrp {
627		fsl,pins = <
628			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
629			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
630			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
631			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
632			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
633			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
634			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
635			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
636			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
637			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
638			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
639			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
640			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
641			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
642			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
643		>;
644	};
645
646	pinctrl_i2c1: i2c1grp {
647		fsl,pins = <
648			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
649			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
650			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
651		>;
652	};
653
654	pinctrl_i2c2: i2c2grp {
655		fsl,pins = <
656			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
657			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
658		>;
659	};
660
661	pinctrl_i2c3: i2c3grp {
662		fsl,pins = <
663			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
664			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
665		>;
666	};
667
668	pinctrl_pcie: pciegrp {
669		fsl,pins = <
670			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
671			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
672		>;
673	};
674
675	pinctrl_pmic: pmicgrp {
676		fsl,pins = <
677			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
678		>;
679	};
680
681	pinctrl_pps: ppsgrp {
682		fsl,pins = <
683			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
684		>;
685	};
686
687	pinctrl_pwm2: pwm2grp {
688		fsl,pins = <
689			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
690		>;
691	};
692
693	pinctrl_pwm3: pwm3grp {
694		fsl,pins = <
695			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
696		>;
697	};
698
699	pinctrl_pwm4: pwm4grp {
700		fsl,pins = <
701			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
702		>;
703	};
704
705	pinctrl_reg_can1: regcan1grp {
706		fsl,pins = <
707			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
708		>;
709	};
710
711	pinctrl_uart1: uart1grp {
712		fsl,pins = <
713			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
714			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
715			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
716		>;
717	};
718
719	pinctrl_uart2: uart2grp {
720		fsl,pins = <
721			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
722			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
723		>;
724	};
725
726	pinctrl_uart5: uart5grp {
727		fsl,pins = <
728			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
729			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
730		>;
731	};
732
733	pinctrl_usbotg: usbotggrp {
734		fsl,pins = <
735			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
736			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
737			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
738		>;
739	};
740
741	pinctrl_usdhc3: usdhc3grp {
742		fsl,pins = <
743			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
744			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
745			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
746			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
747			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
748			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
749			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
750			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
751		>;
752	};
753
754	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
755		fsl,pins = <
756			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
757			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
758			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
759			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
760			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
761			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
762			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
763			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
764		>;
765	};
766
767	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
768		fsl,pins = <
769			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
770			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
771			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
772			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
773			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
774			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
775			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
776			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
777		>;
778	};
779
780	pinctrl_wdog: wdoggrp {
781		fsl,pins = <
782			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
783		>;
784	};
785};
786