xref: /freebsd/sys/contrib/device-tree/src/arm/samsung/exynos5410.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung Exynos5410 SoC device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 *		http://www.samsung.com
7 *
8 * Samsung Exynos5410 SoC device nodes are listed in this file.
9 * Exynos5410 based board files can include this file and provide
10 * values for board specific bindings.
11 */
12
13#include "exynos54xx.dtsi"
14#include <dt-bindings/clock/exynos5410.h>
15#include <dt-bindings/clock/exynos-audss-clk.h>
16#include <dt-bindings/interrupt-controller/arm-gic.h>
17
18/ {
19	compatible = "samsung,exynos5410", "samsung,exynos5";
20	interrupt-parent = <&gic>;
21
22	aliases {
23		pinctrl0 = &pinctrl_0;
24		pinctrl1 = &pinctrl_1;
25		pinctrl2 = &pinctrl_2;
26		pinctrl3 = &pinctrl_3;
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		cpu0: cpu@0 {
34			device_type = "cpu";
35			compatible = "arm,cortex-a15";
36			reg = <0x0>;
37			clock-frequency = <1600000000>;
38		};
39
40		cpu1: cpu@1 {
41			device_type = "cpu";
42			compatible = "arm,cortex-a15";
43			reg = <0x1>;
44			clock-frequency = <1600000000>;
45		};
46
47		cpu2: cpu@2 {
48			device_type = "cpu";
49			compatible = "arm,cortex-a15";
50			reg = <0x2>;
51			clock-frequency = <1600000000>;
52		};
53
54		cpu3: cpu@3 {
55			device_type = "cpu";
56			compatible = "arm,cortex-a15";
57			reg = <0x3>;
58			clock-frequency = <1600000000>;
59		};
60	};
61
62	soc: soc {
63		compatible = "simple-bus";
64		#address-cells = <1>;
65		#size-cells = <1>;
66		ranges;
67
68		pmu_system_controller: system-controller@10040000 {
69			compatible = "samsung,exynos5410-pmu", "syscon";
70			reg = <0x10040000 0x5000>;
71			clock-names = "clkout16";
72			clocks = <&fin_pll>;
73			#clock-cells = <1>;
74		};
75
76		clock: clock-controller@10010000 {
77			compatible = "samsung,exynos5410-clock";
78			reg = <0x10010000 0x30000>;
79			#clock-cells = <1>;
80		};
81
82		clock_audss: audss-clock-controller@3810000 {
83			compatible = "samsung,exynos5410-audss-clock";
84			reg = <0x03810000 0x0c>;
85			#clock-cells = <1>;
86			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
87			clock-names = "pll_ref", "pll_in";
88		};
89
90		tmu_cpu0: tmu@10060000 {
91			compatible = "samsung,exynos5420-tmu";
92			reg = <0x10060000 0x100>;
93			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
94			clocks = <&clock CLK_TMU>;
95			clock-names = "tmu_apbif";
96			#thermal-sensor-cells = <0>;
97		};
98
99		tmu_cpu1: tmu@10064000 {
100			compatible = "samsung,exynos5420-tmu";
101			reg = <0x10064000 0x100>;
102			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
103			clocks = <&clock CLK_TMU>;
104			clock-names = "tmu_apbif";
105			#thermal-sensor-cells = <0>;
106		};
107
108		tmu_cpu2: tmu@10068000 {
109			compatible = "samsung,exynos5420-tmu";
110			reg = <0x10068000 0x100>;
111			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
112			clocks = <&clock CLK_TMU>;
113			clock-names = "tmu_apbif";
114			#thermal-sensor-cells = <0>;
115		};
116
117		tmu_cpu3: tmu@1006c000 {
118			compatible = "samsung,exynos5420-tmu";
119			reg = <0x1006c000 0x100>;
120			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
121			clocks = <&clock CLK_TMU>;
122			clock-names = "tmu_apbif";
123			#thermal-sensor-cells = <0>;
124		};
125
126		mmc_0: mmc@12200000 {
127			compatible = "samsung,exynos5250-dw-mshc";
128			reg = <0x12200000 0x1000>;
129			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
130			#address-cells = <1>;
131			#size-cells = <0>;
132			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
133			clock-names = "biu", "ciu";
134			fifo-depth = <0x80>;
135			status = "disabled";
136		};
137
138		mmc_1: mmc@12210000 {
139			compatible = "samsung,exynos5250-dw-mshc";
140			reg = <0x12210000 0x1000>;
141			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
142			#address-cells = <1>;
143			#size-cells = <0>;
144			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
145			clock-names = "biu", "ciu";
146			fifo-depth = <0x80>;
147			status = "disabled";
148		};
149
150		mmc_2: mmc@12220000 {
151			compatible = "samsung,exynos5250-dw-mshc";
152			reg = <0x12220000 0x1000>;
153			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
154			#address-cells = <1>;
155			#size-cells = <0>;
156			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
157			clock-names = "biu", "ciu";
158			fifo-depth = <0x80>;
159			status = "disabled";
160		};
161
162		pinctrl_0: pinctrl@13400000 {
163			compatible = "samsung,exynos5410-pinctrl";
164			reg = <0x13400000 0x1000>;
165			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
166
167			wakeup-interrupt-controller {
168				compatible = "samsung,exynos4210-wakeup-eint";
169				interrupt-parent = <&gic>;
170				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
171			};
172		};
173
174		pinctrl_1: pinctrl@14000000 {
175			compatible = "samsung,exynos5410-pinctrl";
176			reg = <0x14000000 0x1000>;
177			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
178		};
179
180		pinctrl_2: pinctrl@10d10000 {
181			compatible = "samsung,exynos5410-pinctrl";
182			reg = <0x10d10000 0x1000>;
183			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
184		};
185
186		pinctrl_3: pinctrl@3860000 {
187			compatible = "samsung,exynos5410-pinctrl";
188			reg = <0x03860000 0x1000>;
189			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
190		};
191
192		pdma0: dma-controller@121a0000 {
193			compatible = "arm,pl330", "arm,primecell";
194			reg = <0x121a0000 0x1000>;
195			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
196			clocks = <&clock CLK_PDMA0>;
197			clock-names = "apb_pclk";
198			#dma-cells = <1>;
199		};
200
201		pdma1: dma-controller@121b0000 {
202			compatible = "arm,pl330", "arm,primecell";
203			reg = <0x121b0000 0x1000>;
204			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
205			clocks = <&clock CLK_PDMA1>;
206			clock-names = "apb_pclk";
207			#dma-cells = <1>;
208		};
209
210		audi2s0: i2s@3830000 {
211			compatible = "samsung,exynos5420-i2s";
212			reg = <0x03830000 0x100>;
213			dmas = <&pdma0 10>,
214				<&pdma0 9>,
215				<&pdma0 8>;
216			dma-names = "tx", "rx", "tx-sec";
217			clocks = <&clock_audss EXYNOS_I2S_BUS>,
218				<&clock_audss EXYNOS_I2S_BUS>,
219				<&clock_audss EXYNOS_SCLK_I2S>;
220			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
221			#clock-cells = <1>;
222			clock-output-names = "i2s_cdclk0";
223			#sound-dai-cells = <1>;
224			samsung,idma-addr = <0x03000000>;
225			pinctrl-names = "default";
226			pinctrl-0 = <&audi2s0_bus>;
227			status = "disabled";
228		};
229	};
230
231	thermal-zones {
232		cpu0_thermal: cpu0-thermal {
233			thermal-sensors = <&tmu_cpu0>;
234			#include "exynos5420-trip-points.dtsi"
235		};
236		cpu1_thermal: cpu1-thermal {
237			thermal-sensors = <&tmu_cpu1>;
238			#include "exynos5420-trip-points.dtsi"
239		};
240		cpu2_thermal: cpu2-thermal {
241			thermal-sensors = <&tmu_cpu2>;
242			#include "exynos5420-trip-points.dtsi"
243		};
244		cpu3_thermal: cpu3-thermal {
245			thermal-sensors = <&tmu_cpu3>;
246			#include "exynos5420-trip-points.dtsi"
247		};
248	};
249};
250
251&adc {
252	clocks = <&clock CLK_TSADC>;
253	clock-names = "adc";
254	samsung,syscon-phandle = <&pmu_system_controller>;
255};
256
257&arm_a15_pmu {
258	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
259	status = "okay";
260};
261
262&i2c_0 {
263	clocks = <&clock CLK_I2C0>;
264	clock-names = "i2c";
265	pinctrl-names = "default";
266	pinctrl-0 = <&i2c0_bus>;
267};
268
269&i2c_1 {
270	clocks = <&clock CLK_I2C1>;
271	clock-names = "i2c";
272	pinctrl-names = "default";
273	pinctrl-0 = <&i2c1_bus>;
274};
275
276&i2c_2 {
277	clocks = <&clock CLK_I2C2>;
278	clock-names = "i2c";
279	pinctrl-names = "default";
280	pinctrl-0 = <&i2c2_bus>;
281};
282
283&i2c_3 {
284	clocks = <&clock CLK_I2C3>;
285	clock-names = "i2c";
286	pinctrl-names = "default";
287	pinctrl-0 = <&i2c3_bus>;
288};
289
290&hsi2c_4 {
291	clocks = <&clock CLK_USI0>;
292	clock-names = "hsi2c";
293	pinctrl-names = "default";
294	pinctrl-0 = <&i2c4_hs_bus>;
295};
296
297&hsi2c_5 {
298	clocks = <&clock CLK_USI1>;
299	clock-names = "hsi2c";
300	pinctrl-names = "default";
301	pinctrl-0 = <&i2c5_hs_bus>;
302};
303
304&hsi2c_6 {
305	clocks = <&clock CLK_USI2>;
306	clock-names = "hsi2c";
307	pinctrl-names = "default";
308	pinctrl-0 = <&i2c6_hs_bus>;
309};
310
311&hsi2c_7 {
312	clocks = <&clock CLK_USI3>;
313	clock-names = "hsi2c";
314	pinctrl-names = "default";
315	pinctrl-0 = <&i2c7_hs_bus>;
316};
317
318&mct {
319	clocks = <&fin_pll>, <&clock CLK_MCT>;
320	clock-names = "fin_pll", "mct";
321};
322
323&prng {
324	clocks = <&clock CLK_SSS>;
325	clock-names = "secss";
326};
327
328&pwm {
329	clocks = <&clock CLK_PWM>;
330	clock-names = "timers";
331};
332
333&rtc {
334	clocks = <&clock CLK_RTC>;
335	clock-names = "rtc";
336	status = "disabled";
337};
338
339&serial_0 {
340	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
341	clock-names = "uart", "clk_uart_baud0";
342	dmas = <&pdma0 13>, <&pdma0 14>;
343	dma-names = "rx", "tx";
344};
345
346&serial_1 {
347	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
348	clock-names = "uart", "clk_uart_baud0";
349	dmas = <&pdma1 15>, <&pdma1 16>;
350	dma-names = "rx", "tx";
351};
352
353&serial_2 {
354	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
355	clock-names = "uart", "clk_uart_baud0";
356	dmas = <&pdma0 15>, <&pdma0 16>;
357	dma-names = "rx", "tx";
358};
359
360&serial_3 {
361	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
362	clock-names = "uart", "clk_uart_baud0";
363	dmas = <&pdma1 17>, <&pdma1 18>;
364	dma-names = "rx", "tx";
365};
366
367&sss {
368	clocks = <&clock CLK_SSS>;
369	clock-names = "secss";
370};
371
372&sromc {
373	#address-cells = <2>;
374	#size-cells = <1>;
375	ranges = <0 0 0x04000000 0x20000
376		  1 0 0x05000000 0x20000
377		  2 0 0x06000000 0x20000
378		  3 0 0x07000000 0x20000>;
379};
380
381&trng {
382	clocks = <&clock CLK_SSS>;
383	clock-names = "secss";
384};
385
386&usbdrd3_0 {
387	clocks = <&clock CLK_USBD300>;
388	clock-names = "usbdrd30";
389	pinctrl-names = "default";
390	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
391};
392
393&usbdrd_phy0 {
394	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
395	clock-names = "phy", "ref";
396	samsung,pmu-syscon = <&pmu_system_controller>;
397};
398
399&usbdrd3_1 {
400	clocks = <&clock CLK_USBD301>;
401	clock-names = "usbdrd30";
402	pinctrl-names = "default";
403	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
404};
405
406&usbdrd_dwc3_1 {
407	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
408};
409
410&usbdrd_phy1 {
411	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
412	clock-names = "phy", "ref";
413	samsung,pmu-syscon = <&pmu_system_controller>;
414};
415
416&usbhost1 {
417	clocks = <&clock CLK_USBH20>;
418	clock-names = "usbhost";
419};
420
421&usbhost2 {
422	clocks = <&clock CLK_USBH20>;
423	clock-names = "usbhost";
424};
425
426&usb2_phy {
427	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
428	clock-names = "phy", "ref";
429	samsung,sysreg-phandle = <&sysreg_system_controller>;
430	samsung,pmureg-phandle = <&pmu_system_controller>;
431};
432
433&watchdog {
434	clocks = <&clock CLK_WDT>;
435	clock-names = "watchdog";
436	samsung,syscon-phandle = <&pmu_system_controller>;
437};
438
439#include "exynos5410-pinctrl.dtsi"
440#include "exynos-syscon-restart.dtsi"
441