1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Broadcom BCM63138 DSL SoCs Device Tree 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/interrupt-controller/irq.h> 8 9/ { 10 #address-cells = <1>; 11 #size-cells = <1>; 12 compatible = "brcm,bcm63138", "brcm,bcmbca"; 13 model = "Broadcom BCM963138 Reference Board"; 14 interrupt-parent = <&gic>; 15 16 aliases { 17 uart0 = &serial0; 18 uart1 = &serial1; 19 }; 20 21 cpus { 22 #address-cells = <1>; 23 #size-cells = <0>; 24 25 cpu@0 { 26 device_type = "cpu"; 27 compatible = "arm,cortex-a9"; 28 next-level-cache = <&L2>; 29 reg = <0>; 30 enable-method = "brcm,bcm63138"; 31 }; 32 33 cpu@1 { 34 device_type = "cpu"; 35 compatible = "arm,cortex-a9"; 36 next-level-cache = <&L2>; 37 reg = <1>; 38 enable-method = "brcm,bcm63138"; 39 resets = <&pmb0 4 1>; 40 }; 41 }; 42 43 clocks { 44 /* UBUS peripheral clock */ 45 periph_clk: periph_clk { 46 #clock-cells = <0>; 47 compatible = "fixed-clock"; 48 clock-frequency = <50000000>; 49 clock-output-names = "periph"; 50 }; 51 52 /* peripheral clock for system timer */ 53 axi_clk: axi_clk { 54 #clock-cells = <0>; 55 compatible = "fixed-factor-clock"; 56 clocks = <&armpll>; 57 clock-div = <2>; 58 clock-mult = <1>; 59 }; 60 61 /* APB bus clock */ 62 apb_clk: apb_clk { 63 #clock-cells = <0>; 64 compatible = "fixed-factor-clock"; 65 clocks = <&armpll>; 66 clock-div = <4>; 67 clock-mult = <1>; 68 }; 69 70 hsspi_pll: hsspi-pll { 71 compatible = "fixed-clock"; 72 #clock-cells = <0>; 73 clock-frequency = <400000000>; 74 }; 75 }; 76 77 /* ARM bus */ 78 axi@80000000 { 79 compatible = "simple-bus"; 80 ranges = <0 0x80000000 0x784000>; 81 #address-cells = <1>; 82 #size-cells = <1>; 83 84 L2: cache-controller@1d000 { 85 compatible = "arm,pl310-cache"; 86 reg = <0x1d000 0x1000>; 87 cache-unified; 88 cache-level = <2>; 89 cache-size = <524288>; 90 cache-sets = <1024>; 91 cache-line-size = <32>; 92 interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; 93 }; 94 95 scu: scu@1e000 { 96 compatible = "arm,cortex-a9-scu"; 97 reg = <0x1e000 0x100>; 98 }; 99 100 gic: interrupt-controller@1f000 { 101 compatible = "arm,cortex-a9-gic"; 102 reg = <0x1f000 0x1000 103 0x1e100 0x100>; 104 #interrupt-cells = <3>; 105 #address-cells = <0>; 106 interrupt-controller; 107 }; 108 109 global_timer: timer@1e200 { 110 compatible = "arm,cortex-a9-global-timer"; 111 reg = <0x1e200 0x20>; 112 interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; 113 clocks = <&axi_clk>; 114 }; 115 116 local_timer: local-timer@1e600 { 117 compatible = "arm,cortex-a9-twd-timer"; 118 reg = <0x1e600 0x20>; 119 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | 120 IRQ_TYPE_EDGE_RISING)>; 121 clocks = <&axi_clk>; 122 }; 123 124 twd_watchdog: watchdog@1e620 { 125 compatible = "arm,cortex-a9-twd-wdt"; 126 reg = <0x1e620 0x20>; 127 interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | 128 IRQ_TYPE_LEVEL_HIGH)>; 129 }; 130 131 armpll: armpll@20000 { 132 #clock-cells = <0>; 133 compatible = "brcm,bcm63138-armpll"; 134 clocks = <&periph_clk>; 135 reg = <0x20000 0xf00>; 136 }; 137 138 pmb0: reset-controller@4800c0 { 139 compatible = "brcm,bcm63138-pmb"; 140 reg = <0x4800c0 0x10>; 141 #reset-cells = <2>; 142 }; 143 144 pmb1: reset-controller@4800e0 { 145 compatible = "brcm,bcm63138-pmb"; 146 reg = <0x4800e0 0x10>; 147 #reset-cells = <2>; 148 }; 149 150 ahci: sata@a000 { 151 compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; 152 reg-names = "ahci", "top-ctrl"; 153 reg = <0xa000 0x9ac>, <0x8040 0x24>; 154 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 155 #address-cells = <1>; 156 #size-cells = <0>; 157 resets = <&pmb0 3 1>; 158 reset-names = "ahci"; 159 status = "disabled"; 160 161 sata0: sata-port@0 { 162 reg = <0>; 163 phys = <&sata_phy0>; 164 }; 165 }; 166 167 sata_phy: sata-phy@8100 { 168 compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; 169 reg = <0x8100 0x1e00>; 170 reg-names = "phy"; 171 #address-cells = <1>; 172 #size-cells = <0>; 173 status = "disabled"; 174 175 sata_phy0: sata-phy@0 { 176 reg = <0>; 177 #phy-cells = <0>; 178 }; 179 }; 180 }; 181 182 /* Legacy UBUS base */ 183 ubus@fffe8000 { 184 compatible = "simple-bus"; 185 #address-cells = <1>; 186 #size-cells = <1>; 187 ranges = <0 0xfffe8000 0x8100>; 188 189 timer: timer@80 { 190 compatible = "brcm,bcm6328-timer", "syscon"; 191 reg = <0x80 0x3c>; 192 }; 193 194 serial0: serial@600 { 195 compatible = "brcm,bcm6345-uart"; 196 reg = <0x600 0x1b>; 197 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 198 clocks = <&periph_clk>; 199 clock-names = "periph"; 200 status = "disabled"; 201 }; 202 203 serial1: serial@620 { 204 compatible = "brcm,bcm6345-uart"; 205 reg = <0x620 0x1b>; 206 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 207 clocks = <&periph_clk>; 208 clock-names = "periph"; 209 status = "disabled"; 210 }; 211 212 hsspi: spi@1000 { 213 #address-cells = <1>; 214 #size-cells = <0>; 215 compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; 216 reg = <0x1000 0x600>; 217 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 218 clocks = <&hsspi_pll &hsspi_pll>; 219 clock-names = "hsspi", "pll"; 220 num-cs = <8>; 221 status = "disabled"; 222 }; 223 224 nand_controller: nand-controller@2000 { 225 #address-cells = <1>; 226 #size-cells = <0>; 227 compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; 228 reg = <0x2000 0x600>, <0xf0 0x10>; 229 reg-names = "nand", "nand-int-base"; 230 status = "disabled"; 231 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 232 interrupt-names = "nand"; 233 }; 234 235 serial@4400 { 236 compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart"; 237 reg = <0x4400 0x1e0>; 238 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 239 }; 240 241 bootlut: bootlut@8000 { 242 compatible = "brcm,bcm63138-bootlut"; 243 reg = <0x8000 0x50>; 244 }; 245 246 reboot { 247 compatible = "syscon-reboot"; 248 regmap = <&timer>; 249 offset = <0x34>; 250 mask = <1>; 251 }; 252 }; 253}; 254