xref: /freebsd/sys/contrib/device-tree/src/arm/marvell/armada-370.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 370 family SoC
4 *
5 * Copyright (C) 2012 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 *
11 * Contains definitions specific to the Armada 370 SoC that are not
12 * common to all Armada SoCs.
13 */
14
15#include "armada-370-xp.dtsi"
16
17/ {
18	#address-cells = <1>;
19	#size-cells = <1>;
20
21	model = "Marvell Armada 370 family SoC";
22	compatible = "marvell,armada370", "marvell,armada-370-xp";
23
24	aliases {
25		gpio0 = &gpio0;
26		gpio1 = &gpio1;
27		gpio2 = &gpio2;
28	};
29
30	soc {
31		compatible = "marvell,armada370-mbus", "simple-bus";
32
33		bootrom {
34			compatible = "marvell,bootrom";
35			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
36		};
37
38		pciec: pcie@82000000 {
39			compatible = "marvell,armada-370-pcie";
40			status = "disabled";
41			device_type = "pci";
42
43			#address-cells = <3>;
44			#size-cells = <2>;
45
46			msi-parent = <&mpic>;
47			bus-range = <0x00 0xff>;
48
49			ranges =
50			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
51				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
52				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
53				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
54				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
55				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
56
57			pcie0: pcie@1,0 {
58				device_type = "pci";
59				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
60				reg = <0x0800 0 0 0 0>;
61				#address-cells = <3>;
62				#size-cells = <2>;
63				interrupt-names = "intx";
64				interrupts-extended = <&mpic 58>;
65				#interrupt-cells = <1>;
66                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
67                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
68				bus-range = <0x00 0xff>;
69				interrupt-map-mask = <0 0 0 7>;
70				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
71						<0 0 0 2 &pcie0_intc 1>,
72						<0 0 0 3 &pcie0_intc 2>,
73						<0 0 0 4 &pcie0_intc 3>;
74				marvell,pcie-port = <0>;
75				marvell,pcie-lane = <0>;
76				clocks = <&gateclk 5>;
77				status = "disabled";
78
79				pcie0_intc: interrupt-controller {
80					interrupt-controller;
81					#interrupt-cells = <1>;
82				};
83			};
84
85			pcie2: pcie@2,0 {
86				device_type = "pci";
87				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
88				reg = <0x1000 0 0 0 0>;
89				#address-cells = <3>;
90				#size-cells = <2>;
91				interrupt-names = "intx";
92				interrupts-extended = <&mpic 62>;
93				#interrupt-cells = <1>;
94                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
95                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
96				bus-range = <0x00 0xff>;
97				interrupt-map-mask = <0 0 0 7>;
98				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
99						<0 0 0 2 &pcie2_intc 1>,
100						<0 0 0 3 &pcie2_intc 2>,
101						<0 0 0 4 &pcie2_intc 3>;
102				marvell,pcie-port = <1>;
103				marvell,pcie-lane = <0>;
104				clocks = <&gateclk 9>;
105				status = "disabled";
106
107				pcie2_intc: interrupt-controller {
108					interrupt-controller;
109					#interrupt-cells = <1>;
110				};
111			};
112		};
113
114		internal-regs {
115			L2: l2-cache@8000 {
116				compatible = "marvell,aurora-outer-cache";
117				reg = <0x08000 0x1000>;
118				cache-id-part = <0x100>;
119				cache-level = <2>;
120				cache-unified;
121				wt-override;
122			};
123
124			gpio0: gpio@18100 {
125				compatible = "marvell,armada-370-gpio",
126					     "marvell,orion-gpio";
127				reg = <0x18100 0x40>, <0x181c0 0x08>;
128				reg-names = "gpio", "pwm";
129				ngpios = <32>;
130				gpio-controller;
131				#gpio-cells = <2>;
132				#pwm-cells = <2>;
133				interrupt-controller;
134				#interrupt-cells = <2>;
135				interrupts = <82>, <83>, <84>, <85>;
136				clocks = <&coreclk 0>;
137			};
138
139			gpio1: gpio@18140 {
140				compatible = "marvell,armada-370-gpio",
141					     "marvell,orion-gpio";
142				reg = <0x18140 0x40>, <0x181c8 0x08>;
143				reg-names = "gpio", "pwm";
144				ngpios = <32>;
145				gpio-controller;
146				#gpio-cells = <2>;
147				#pwm-cells = <2>;
148				interrupt-controller;
149				#interrupt-cells = <2>;
150				interrupts = <87>, <88>, <89>, <90>;
151				clocks = <&coreclk 0>;
152			};
153
154			gpio2: gpio@18180 {
155				compatible = "marvell,armada-370-gpio",
156					     "marvell,orion-gpio";
157				reg = <0x18180 0x40>;
158				ngpios = <2>;
159				gpio-controller;
160				#gpio-cells = <2>;
161				interrupt-controller;
162				#interrupt-cells = <2>;
163				interrupts = <91>;
164			};
165
166
167			systemc: system-controller@18200 {
168				compatible = "marvell,armada-370-xp-system-controller";
169				reg = <0x18200 0x100>;
170			};
171
172			gateclk: clock-gating-control@18220 {
173				compatible = "marvell,armada-370-gating-clock";
174				reg = <0x18220 0x4>;
175				clocks = <&coreclk 0>;
176				#clock-cells = <1>;
177			};
178
179			coreclk: mvebu-sar@18230 {
180				compatible = "marvell,armada-370-core-clock";
181				reg = <0x18230 0x08>;
182				#clock-cells = <1>;
183			};
184
185			thermal: thermal@18300 {
186				compatible = "marvell,armada370-thermal";
187				reg = <0x18300 0x4
188					0x18304 0x4>;
189				status = "okay";
190			};
191
192			sscg: sscg@18330 {
193				reg = <0x18330 0x4>;
194			};
195
196			cpuconf: cpu-config@21000 {
197				compatible = "marvell,armada-370-cpu-config";
198				reg = <0x21000 0x8>;
199			};
200
201			audio_controller: audio-controller@30000 {
202				#sound-dai-cells = <1>;
203				compatible = "marvell,armada370-audio";
204				reg = <0x30000 0x4000>;
205				interrupts = <93>;
206				clocks = <&gateclk 0>;
207				clock-names = "internal";
208				status = "disabled";
209			};
210
211			xor0: xor@60800 {
212				compatible = "marvell,orion-xor";
213				reg = <0x60800 0x100
214				       0x60A00 0x100>;
215				status = "okay";
216
217				xor00 {
218					interrupts = <51>;
219					dmacap,memcpy;
220					dmacap,xor;
221				};
222				xor01 {
223					interrupts = <52>;
224					dmacap,memcpy;
225					dmacap,xor;
226					dmacap,memset;
227				};
228			};
229
230			xor1: xor@60900 {
231				compatible = "marvell,orion-xor";
232				reg = <0x60900 0x100
233				       0x60b00 0x100>;
234				status = "okay";
235
236				xor10 {
237					interrupts = <94>;
238					dmacap,memcpy;
239					dmacap,xor;
240				};
241				xor11 {
242					interrupts = <95>;
243					dmacap,memcpy;
244					dmacap,xor;
245					dmacap,memset;
246				};
247			};
248
249			cesa: crypto@90000 {
250				compatible = "marvell,armada-370-crypto";
251				reg = <0x90000 0x10000>;
252				reg-names = "regs";
253				interrupts = <48>;
254				clocks = <&gateclk 23>;
255				clock-names = "cesa0";
256				marvell,crypto-srams = <&crypto_sram>;
257				marvell,crypto-sram-size = <0x7e0>;
258			};
259		};
260
261		crypto_sram: sa-sram {
262			compatible = "mmio-sram";
263			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
264			reg-names = "sram";
265			clocks = <&gateclk 23>;
266			#address-cells = <1>;
267			#size-cells = <1>;
268			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
269
270			/*
271			 * The Armada 370 has an erratum preventing the use of
272			 * the standard workflow for CPU idle support (relying
273			 * on the BootROM code to enter/exit idle state).
274			 * Reserve some amount of the crypto SRAM to put the
275			 * cpuidle workaround.
276			 */
277			idle-sram@0 {
278				reg = <0x0 0x20>;
279			};
280		};
281	};
282};
283
284/*
285 * Default UART pinctrl setting without RTS/CTS, can be overwritten on
286 * board level if a different configuration is used.
287 */
288
289&uart0 {
290	pinctrl-0 = <&uart0_pins>;
291	pinctrl-names = "default";
292};
293
294&uart1 {
295	pinctrl-0 = <&uart1_pins>;
296	pinctrl-names = "default";
297};
298
299&i2c0 {
300	reg = <0x11000 0x20>;
301};
302
303&i2c1 {
304	reg = <0x11100 0x20>;
305};
306
307&mpic {
308	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
309};
310
311&timer {
312	compatible = "marvell,armada-370-timer";
313	clocks = <&coreclk 2>;
314};
315
316&watchdog {
317	compatible = "marvell,armada-370-wdt";
318	clocks = <&coreclk 2>;
319};
320
321&usb0 {
322	clocks = <&coreclk 0>;
323};
324
325&usb1 {
326	clocks = <&coreclk 0>;
327};
328
329&eth0 {
330	compatible = "marvell,armada-370-neta";
331};
332
333&eth1 {
334	compatible = "marvell,armada-370-neta";
335};
336
337&pinctrl {
338	compatible = "marvell,mv88f6710-pinctrl";
339
340	spi0_pins1: spi0-pins1 {
341		marvell,pins = "mpp33", "mpp34",
342			       "mpp35", "mpp36";
343		marvell,function = "spi0";
344	};
345
346	spi0_pins2: spi0_pins2 {
347		marvell,pins = "mpp32", "mpp63",
348			       "mpp64", "mpp65";
349		marvell,function = "spi0";
350	};
351
352	spi1_pins: spi1-pins {
353		marvell,pins = "mpp49", "mpp50",
354			       "mpp51", "mpp52";
355		marvell,function = "spi1";
356	};
357
358	uart0_pins: uart0-pins {
359		marvell,pins = "mpp0", "mpp1";
360		marvell,function = "uart0";
361	};
362
363	uart1_pins: uart1-pins {
364		marvell,pins = "mpp41", "mpp42";
365		marvell,function = "uart1";
366	};
367
368	sdio_pins1: sdio-pins1 {
369		marvell,pins = "mpp9",  "mpp11", "mpp12",
370				"mpp13", "mpp14", "mpp15";
371		marvell,function = "sd0";
372	};
373
374	sdio_pins2: sdio-pins2 {
375		marvell,pins = "mpp47", "mpp48", "mpp49",
376				"mpp50", "mpp51", "mpp52";
377		marvell,function = "sd0";
378	};
379
380	sdio_pins3: sdio-pins3 {
381		marvell,pins = "mpp48", "mpp49", "mpp50",
382				"mpp51", "mpp52", "mpp53";
383		marvell,function = "sd0";
384	};
385
386	i2c0_pins: i2c0-pins {
387		marvell,pins = "mpp2", "mpp3";
388		marvell,function = "i2c0";
389	};
390
391	i2s_pins1: i2s-pins1 {
392		marvell,pins = "mpp5", "mpp6", "mpp7",
393			       "mpp8", "mpp9", "mpp10",
394			       "mpp12", "mpp13";
395		marvell,function = "audio";
396	};
397
398	i2s_pins2: i2s-pins2 {
399		marvell,pins = "mpp49", "mpp47", "mpp50",
400			       "mpp59", "mpp57", "mpp61",
401			       "mpp62", "mpp60", "mpp58";
402		marvell,function = "audio";
403	};
404
405	mdio_pins: mdio-pins {
406		marvell,pins = "mpp17", "mpp18";
407		marvell,function = "ge";
408	};
409
410	ge0_rgmii_pins: ge0-rgmii-pins {
411		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
412			       "mpp9", "mpp10", "mpp11", "mpp12",
413			       "mpp13", "mpp14", "mpp15", "mpp16";
414		marvell,function = "ge0";
415	};
416
417	ge1_rgmii_pins: ge1-rgmii-pins {
418		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
419			       "mpp23", "mpp24", "mpp25", "mpp26",
420			       "mpp27", "mpp28", "mpp29", "mpp30";
421		marvell,function = "ge1";
422	};
423};
424
425/*
426 * Default SPI pinctrl setting, can be overwritten on
427 * board level if a different configuration is used.
428 */
429&spi0 {
430	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
431	pinctrl-0 = <&spi0_pins1>;
432	pinctrl-names = "default";
433};
434
435&spi1 {
436	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
437	pinctrl-0 = <&spi1_pins>;
438	pinctrl-names = "default";
439};
440