| /linux/sound/usb/ |
| H A D | midi2.h | ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | midi2.c | ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | Makefile | diff ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | Kconfig | diff ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | usbaudio.h | diff ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | card.c | diff ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | quirks.c | diff ff49d1df79aef7580fe3ac99d17c3f886655d080 Tue May 23 09:53:30 CEST 2023 Takashi Iwai <tiwai@suse.de> ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|