| /freebsd/sys/dev/etherswitch/ar40xx/ |
| H A D | ar40xx_reg.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_debug.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_atu.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mdio.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mib.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mirror.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_port.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_psgmii.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_vtu.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_phy.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_var.h | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_atu.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mdio.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mib.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_mirror.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_port.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_psgmii.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_hw_vtu.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_phy.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| H A D | ar40xx_main.c | e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| /freebsd/sys/arm/conf/ |
| H A D | std.qca | diff e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|
| /freebsd/sys/arm/qualcomm/ |
| H A D | std.ipq4018 | diff e388de98bd0272b4ba237dcd44dcf12360d70d41 Sun Jan 30 04:04:19 CET 2022 Adrian Chadd <adrian@FreeBSD.org> ar40xx_switch: add initial switch for the IPQ4018/IPQ4019.
Summary:
This switch is based off of the AR8327/AR8337 external switch/PHY.
However unlike the AR8327/AR8337 it itself doesn't have any PHYs;
instead an external PHY connects to it using the PSGMII port.
Differential Revision: https://reviews.freebsd.org/D34112
Reviewed by: manu
This code is inspired by the ar40xx code in openwrt, which itself
is based on the Qualcomm QCA-SSDK. Both of these sources are, amusingly,
BSD licenced - and thus I have included some of the comments in the
hardware workaround paths to document some of the magic numbers.
|