Searched hist:dba7567c2fbbf10a4de2471cdb0e16e5572dc007 (Results 1 – 1 of 1) sorted by relevance
| /linux/drivers/usb/gadget/udc/ |
| H A D | aspeed_udc.c | diff dba7567c2fbbf10a4de2471cdb0e16e5572dc007 Thu Jun 13 06:20:47 CEST 2024 Jeremy Kerr <jk@codeconstruct.com.au> usb: gadget: aspeed_udc: fix device address configuration
In the aspeed UDC setup, we configure the UDC hardware with the assigned
USB device address.
However, we have an off-by-one in the bitmask, so we're only setting the
lower 6 bits of the address (USB addresses being 7 bits, and the
hardware bitmask being bits 0:6).
This means that device enumeration fails if the assigned address is
greater than 64:
[ 344.607255] usb 1-1: new high-speed USB device number 63 using ehci-platform
[ 344.808459] usb 1-1: New USB device found, idVendor=cc00, idProduct=cc00, bcdDevice= 6.10
[ 344.817684] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 344.825671] usb 1-1: Product: Test device
[ 344.831075] usb 1-1: Manufacturer: Test vendor
[ 344.836335] usb 1-1: SerialNumber: 00
[ 349.917181] usb 1-1: USB disconnect, device number 63
[ 352.036775] usb 1-1: new high-speed USB device number 64 using ehci-platform
[ 352.249432] usb 1-1: device descriptor read/all, error -71
[ 352.696740] usb 1-1: new high-speed USB device number 65 using ehci-platform
[ 352.909431] usb 1-1: device descriptor read/all, error -71
Use the correct mask of 0x7f (rather than 0x3f), and generate this
through the GENMASK macro, so we have numbers that correspond exactly
to the hardware register definition.
Fixes: 055276c13205 ("usb: gadget: add Aspeed ast2600 udc driver")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240613-aspeed-udc-v2-1-29501ce9cb7a@codeconstruct.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|