/linux/arch/powerpc/boot/ |
H A D | mvme7100.c | 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
H A D | motload-head.S | 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
H A D | ppcboot.h | diff 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | mvme7100.dts | 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
/linux/arch/powerpc/configs/ |
H A D | 86xx-hw.config | diff 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
/linux/arch/powerpc/platforms/86xx/ |
H A D | mvme7100.c | 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
H A D | Makefile | diff 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|
H A D | Kconfig | diff 97493e2e9eeddfecaca741454f97a689d8141dcf Mon May 30 11:47:16 CEST 2016 Alessio Igor Bogani <alessio.bogani@elettra.eu> powerpc/86xx: Add support for Emerson/Artesyn MVME7100
Add support for the Artesyn MVME7100 Single Board Computer.
The MVME7100 is a 6U form factor VME64 computer with:
- A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash
This patch is based on linux-4.7-rc1 and has been only boot tested.
Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers
Know issues: All four PHYs work in polling mode
Configuration is missing for: PCI IDSEL and PCI Interrupt definition
Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <oss@buserror.net>
|