| /linux/drivers/net/wireless/ath/ath10k/ |
| H A D | leds.h | 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | leds.c | 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | Makefile | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | wmi-ops.h | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | Kconfig | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | wmi-tlv.c | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | hw.h | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | wmi.h | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | core.h | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | wmi.c | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | core.c | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
| H A D | mac.c | diff 8e1debd82466a3fe711784ab37e6b54e56011267 Mon May 13 16:22:25 CEST 2024 Sebastian Gottschall <s.gottschall@dd-wrt.com> wifi: ath10k: add LED and GPIO controlling support for various chipsets
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|