Searched hist:"116 f7cc43d28ccd621ff1fecc9526c65dde28dcd" (Results 1 – 4 of 4) sorted by relevance
| /linux/arch/arm64/boot/dts/qcom/ |
| H A D | sc7280-herobrine-herobrine-r1.dts | 116f7cc43d28ccd621ff1fecc9526c65dde28dcd Fri Feb 04 23:06:07 CET 2022 Douglas Anderson <dianders@chromium.org> arm64: dts: qcom: sc7280: Add herobrine-r1
Add the new herobrine-r1. Note that this is pretty much a re-design
compared to herobrine-r0 so we don't attempt any dtsi to share stuff
between them.
This patch attempts to define things at 3 levels:
1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
is supposed to be the same (modulo stuffing options) across
multiple boards, so trying to define what's there hopefully makes
sense. NOTE that newer "CRD" boards from Qualcomm also use
Qcard. When support for CRD3 is added hopefully it can use the
Qcard include (and perhaps we should even evaluate it using
herobrine.dtsi?)
2. The herobrine "baseboard" level. Right now most stuff is here with
the exception of things that we _know_ will be different per
board. We know that not all boards will have the same set of eMMC,
nvme, and SD. We also know that the exact pin names are likely to
be different.
3. The actual "board" level, AKA herobrine-rev1.
NOTES:
- This boots to command prompt. We're still waiting on the PWM driver.
- This assumes LTE for now. Once it's clear how WiFi-only SKUs will
work we expect some small changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220204140550.v4.1.I5604b7af908e8bbe709ac037a6a8a6ba8a2bfa94@changeid
|
| H A D | sc7280-qcard.dtsi | 116f7cc43d28ccd621ff1fecc9526c65dde28dcd Fri Feb 04 23:06:07 CET 2022 Douglas Anderson <dianders@chromium.org> arm64: dts: qcom: sc7280: Add herobrine-r1
Add the new herobrine-r1. Note that this is pretty much a re-design
compared to herobrine-r0 so we don't attempt any dtsi to share stuff
between them.
This patch attempts to define things at 3 levels:
1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
is supposed to be the same (modulo stuffing options) across
multiple boards, so trying to define what's there hopefully makes
sense. NOTE that newer "CRD" boards from Qualcomm also use
Qcard. When support for CRD3 is added hopefully it can use the
Qcard include (and perhaps we should even evaluate it using
herobrine.dtsi?)
2. The herobrine "baseboard" level. Right now most stuff is here with
the exception of things that we _know_ will be different per
board. We know that not all boards will have the same set of eMMC,
nvme, and SD. We also know that the exact pin names are likely to
be different.
3. The actual "board" level, AKA herobrine-rev1.
NOTES:
- This boots to command prompt. We're still waiting on the PWM driver.
- This assumes LTE for now. Once it's clear how WiFi-only SKUs will
work we expect some small changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220204140550.v4.1.I5604b7af908e8bbe709ac037a6a8a6ba8a2bfa94@changeid
|
| H A D | sc7280-herobrine.dtsi | diff 116f7cc43d28ccd621ff1fecc9526c65dde28dcd Fri Feb 04 23:06:07 CET 2022 Douglas Anderson <dianders@chromium.org> arm64: dts: qcom: sc7280: Add herobrine-r1
Add the new herobrine-r1. Note that this is pretty much a re-design
compared to herobrine-r0 so we don't attempt any dtsi to share stuff
between them.
This patch attempts to define things at 3 levels:
1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
is supposed to be the same (modulo stuffing options) across
multiple boards, so trying to define what's there hopefully makes
sense. NOTE that newer "CRD" boards from Qualcomm also use
Qcard. When support for CRD3 is added hopefully it can use the
Qcard include (and perhaps we should even evaluate it using
herobrine.dtsi?)
2. The herobrine "baseboard" level. Right now most stuff is here with
the exception of things that we _know_ will be different per
board. We know that not all boards will have the same set of eMMC,
nvme, and SD. We also know that the exact pin names are likely to
be different.
3. The actual "board" level, AKA herobrine-rev1.
NOTES:
- This boots to command prompt. We're still waiting on the PWM driver.
- This assumes LTE for now. Once it's clear how WiFi-only SKUs will
work we expect some small changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220204140550.v4.1.I5604b7af908e8bbe709ac037a6a8a6ba8a2bfa94@changeid
|
| H A D | Makefile | diff 116f7cc43d28ccd621ff1fecc9526c65dde28dcd Fri Feb 04 23:06:07 CET 2022 Douglas Anderson <dianders@chromium.org> arm64: dts: qcom: sc7280: Add herobrine-r1
Add the new herobrine-r1. Note that this is pretty much a re-design
compared to herobrine-r0 so we don't attempt any dtsi to share stuff
between them.
This patch attempts to define things at 3 levels:
1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
is supposed to be the same (modulo stuffing options) across
multiple boards, so trying to define what's there hopefully makes
sense. NOTE that newer "CRD" boards from Qualcomm also use
Qcard. When support for CRD3 is added hopefully it can use the
Qcard include (and perhaps we should even evaluate it using
herobrine.dtsi?)
2. The herobrine "baseboard" level. Right now most stuff is here with
the exception of things that we _know_ will be different per
board. We know that not all boards will have the same set of eMMC,
nvme, and SD. We also know that the exact pin names are likely to
be different.
3. The actual "board" level, AKA herobrine-rev1.
NOTES:
- This boots to command prompt. We're still waiting on the PWM driver.
- This assumes LTE for now. Once it's clear how WiFi-only SKUs will
work we expect some small changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220204140550.v4.1.I5604b7af908e8bbe709ac037a6a8a6ba8a2bfa94@changeid
|