/freebsd/sys/contrib/device-tree/Bindings/iio/light/ |
H A D | st,uvis25.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: ST UVIS25 uv sensor 10 - Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> 25 - compatible 26 - reg 29 - | 30 #include <dt-bindings/interrupt-controller/irq.h> 32 #address-cells = <1>; [all …]
|
H A D | ams,as73211.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor 10 - Christian Eggers <ceggers@arri.de> 13 AMS AS73211 XYZ True Color Sensor with I2C Interface 14 …https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616… 15 AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface 16 https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf 21 - ams,as73211 [all …]
|
H A D | uvis25.txt | 1 * ST UVIS25 uv sensor 4 - compatible: should be "st,uvis25" 5 - reg: i2c address of the sensor / spi cs line 8 - interrupts: interrupt mapping for IRQ. It should be configured with 12 Refer to interrupt-controller/interrupts.txt for generic interrupt 20 interrupt-parent = <&gpio0>;
|
H A D | vishay,veml6075.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Javier Carrasco <javier.carrasco.cruz@gmail.com> 18 - vishay,veml6040 19 - vishay,veml6075 24 vdd-supply: true 27 - compatible 28 - reg 29 - vdd-supply [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/hwmon/ |
H A D | ntc-thermistor.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2 --- 3 $id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml# 4 $schema: http://devicetree.org/meta-schemas/core.yaml# 9 - Linus Walleij <linus.walleij@linaro.org> 13 vary in resistance in an often non-linear way in relation to temperature. 16 temperature is non-linear, software drivers most often need to use a look 20 pull-up resistor or/and a pull-down resistor and a fixed voltage like this: 22 + e.g. 5V = pull-up voltage (puv) 24 +-+ [all …]
|
H A D | ntc_thermistor.txt | 2 ------------------------------- 5 - "compatible" value : one of 23 - "pullup-uv" Pull up voltage in micro volts 24 - "pullup-ohm" Pull up resistor value in ohms 25 - "pulldown-ohm" Pull down resistor value in ohms 26 - "connected-positive" Always ON, If not specified. 28 - "io-channels" Channel node of ADC to be used for 32 - "#thermal-sensor-cells" Used to expose itself to thermal fw. 35 https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ 40 pullup-uv = <1800000>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
H A D | omap443x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 13 /* OMAP443x variants OPP50-OPPNT */ 14 operating-points = < 15 /* kHz uV */ 21 clock-latency = <300000>; /* From legacy driver */ 24 #cooling-cell [all...] |
H A D | omap4460.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 13 operating-points = < 14 /* kHz uV */ 19 clock-latency = <300000>; /* From legacy driver */ 22 #cooling-cells = <2>; /* min followed by max */ 26 thermal-zone [all...] |
H A D | omap36xx.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/media/omap3-isp.h> 21 operating-points-v2 = <&cpu0_opp_table>; 23 vbb-supply = <&abb_mpu_iva>; 24 clock-latency = <300000>; /* From omap-cpufreq driver */ 25 #cooling-cells = <2>; 29 cpu0_opp_table: opp-table { 30 compatible = "operating-points-v2-ti-cpu"; [all …]
|
H A D | omap5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/pinctrl/omap.h> 12 #include <dt-bindings/clock/omap5.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 19 interrupt-parent = <&wakeupgen>; [all …]
|
H A D | dra7.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/clock/dra7.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/pinctrl/dra.h> 12 #include <dt-bindings/clock/dra7.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 21 interrupt-parent = <&crossbar_mpu>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/rockchip/ |
H A D | rk3399-gru-kevin.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Google Gru-Kevin Rev 6+ board device tree source 5 * Copyright 2016-2017 Google, Inc 8 /dts-v1/; 9 #include "rk3399-gru-chromebook.dtsi" 10 #include <dt-bindings/input/linux-event-codes.h> 13 * Kevin-specific things 21 compatible = "google,kevin-rev15", "google,kevin-rev14", 22 "google,kevin-rev13", "google,kevin-rev12", 23 "google,kevin-rev11", "google,kevin-rev10", [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/st/ |
H A D | ste-hrefv60plus.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Copyright 2012 ST-Ericsson AB 6 #include "ste-href.dtsi" 9 model = "ST-Ericsson HREF (v60+) platform with Device Tree"; 10 compatible = "st-ericsson,hrefv60+", "st-ericsso [all...] |
H A D | ste-href.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Copyright 2012 ST-Ericsson AB 6 #include <dt-bindings/interrupt-controller/irq.h> 7 #include <dt-bindings/leds/common.h> 8 #include "ste-hre [all...] |
H A D | ste-snowball.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Copyright 2011 ST-Ericsson AB 6 /dts-v1/; 7 #include "ste-db9500.dtsi" 8 #include "ste-href-ab850 [all...] |
H A D | ste-ux500-samsung-janice.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Devicetree for the Samsung Galaxy S Advance GT-I9070 also known as Janice. 6 /dts-v1/; 7 #include "ste-db8500.dtsi" 8 #include "ste-ab8500.dtsi" 9 #include "ste-dbx5x0-pinctr [all...] |
H A D | ste-ux500-samsung-skomer.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer. 6 /dts-v1/; 7 #include "ste-db8500.dtsi" 8 #include "ste-ab8505.dtsi" 9 #include "ste-dbx5x0-pinctrl.dtsi" 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/leds/common.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/interrupt-controller/irq.h> [all …]
|
H A D | ste-ux500-samsung-kyle.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Devicetree for the Samsung Galaxy Amp SGH-I407 also known as Kyle. 10 /dts-v1/; 11 #include "ste-db8500.dtsi" 12 #include "ste-ab8505.dtsi" 13 #include "ste-dbx5x0-pinctr [all...] |
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx6q-bosch-acc.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Support for the i.MX6-based Bosch ACC board. 8 * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> 12 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/leds/common.h> 20 compatible = "bosch,imx6q-acc", "fsl,imx6q"; 37 backlight_lvds: backlight-lvds { 38 compatible = "pwm-backlight"; 40 brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; [all …]
|
H A D | imx6dl-b1x5pv2.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 6 // Copyright 2018-2021 General Electric Company 7 // Copyright 2018-2021 Collabora 9 #include <dt-bindings/input/input.h> 10 #include "imx6dl-qmx6.dtsi" 14 stdout-path = &uart3; 20 operating-points = < 21 /* kHz uV */ [all...] |
/freebsd/sys/contrib/device-tree/Bindings/thermal/ |
H A D | thermal.txt | 15 - thermal sensors: devices which may be used to take temperature 17 - cooling devices: devices which may be used to dissipate heat. 18 - trip points: describe key temperatures at which cooling is recommended. The 20 - cooling maps: used to describe links between trip points and cooling devices; 21 - thermal zones: used to describe thermal data within the hardware; 25 * Thermal sensor devices 27 Thermal sensor devices are nodes providing temperature sensing capabilities on 29 nodes providing temperature data to thermal zones. Thermal sensor devices may 33 - #thermal-sensor-cells: Used to provide sensor device specific information 34 Type: unsigned while referring to it. Typically 0 on thermal sensor [all …]
|
/freebsd/sys/arm/allwinner/ |
H A D | axp81x.c | 1 /*- 28 * X-Powers AXP803/813/818 PMU for Allwinner SoCs 193 #define AXP_BAP_CAP_WARN_LV1BASE 5 /* 5-20%, 1% per step */ 196 /* Sensor conversion macros */ 215 { "x-powers,axp803", AXP803 }, 216 { "x-powers,axp813", AXP813 }, 217 { "x-powers,axp818", AXP813 }, 223 { -1, 0 } 527 .name = "ldo-io0", 540 .name = "ldo-io1", [all …]
|
H A D | axp209.c | 1 /*- 2 * Copyright (c) 2015-2016 Emmanuel Vadot <manu@freebsd.org> 29 * X-Power AXP209/AXP211 PMU for Allwinner SoCs 525 .value_convert = -(AXP209_TEMPMON_MIN - AXP209_0C_TO_K), 589 .value_convert = -(AXP221_TEMPMON_MIN - AXP209_0C_TO_K), 622 { "x-powers,axp209", AXP209 }, 623 { "x-powers,axp221", AXP221 }, 629 { -1, 0, 0 } 632 #define AXP_LOCK(sc) mtx_lock(&(sc)->mtx) 633 #define AXP_UNLOCK(sc) mtx_unlock(&(sc)->mtx) [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/aspeed/ |
H A D | aspeed-bmc-facebook-harma.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 4 /dts-v1/; 5 #include "aspeed-g6.dtsi" 6 #include <dt-bindings/gpio/aspeed-gpio.h> 7 #include <dt-bindings/i2c/i2c.h> 11 compatible = "facebook,harma-bmc", "aspeed,ast2600"; 32 stdout-path = &uart5; 40 iio-hwmon { 41 compatible = "iio-hwmon"; 42 io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/mediatek/ |
H A D | mt8183-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 /dts-v1/; 14 chassis-type = "embedded"; 15 compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; 27 stdout-path = "serial0:921600n8"; 30 reserved-memory { 31 #address-cells = <2>; 32 #size-cells = <2>; 35 compatible = "shared-dma-pool"; 37 no-map; [all …]
|