| /freebsd/sys/contrib/device-tree/include/dt-bindings/pinctrl/ |
| H A D | k210-fpioa.h | 80 #define K210_PCF_UART2_RX 66 /* UART2 Receiver */
81 #define K210_PCF_UART2_TX 67 /* UART2 Transmitter */
176 #define K210_PCF_UART2_CTS 162 /* UART2 Clear To Send */
177 #define K210_PCF_UART2_DSR 163 /* UART2 Data Set Ready */
178 #define K210_PCF_UART2_DCD 164 /* UART2 Data Carrier Detect */
179 #define K210_PCF_UART2_RI 165 /* UART2 Ring Indicator */
180 #define K210_PCF_UART2_SIR_IN 166 /* UART2 Serial Infrared Input */
181 #define K210_PCF_UART2_DTR 167 /* UART2 Data Terminal Ready */
182 #define K210_PCF_UART2_RTS 168 /* UART2 Request To Send */
183 #define K210_PCF_UART2_OUT2 169 /* UART2 User-designated Output 2 */
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | marvell,dove-pinctrl.txt | 18 mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu*
19 mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
20 mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
22 mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
33 mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd),
35 mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
37 mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu*
38 mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu*
|
| H A D | pinctrl-sirf.txt | 29 uart2_pins_a: uart2@0 {
32 sirf,function = "uart2";
35 uart2_noflow_pins_a: uart2@1 {
42 For a specific board, if it wants to use uart2 without hardware flow control,
44 uart2: uart@b0070000 {
|
| H A D | mediatek,mt7621-pinctrl.yaml | 40 uart1, uart2, uart3, wdt refclk, wdt rst]
60 uart1, uart2, uart3, wdt]
141 enum: [uart2]
177 enum: [uart2]
209 const: uart2
213 enum: [uart2]
|
| H A D | ralink,mt7621-pinctrl.yaml | 37 uart1, uart2, uart3, wdt refclk, wdt rst]
57 uart1, uart2, uart3, wdt]
138 enum: [uart2]
174 enum: [uart2]
206 const: uart2
210 enum: [uart2]
|
| H A D | cirrus,lochnagar.yaml | 101 dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
102 gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
134 dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
135 gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
|
| H A D | marvell,armada-xp-pinctrl.txt | 61 mpp40 40 gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0),
63 mpp41 41 gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
65 mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer)
66 mpp43 43 gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout),
68 mpp44 44 gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2),
70 mpp45 45 gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt),
|
| H A D | mediatek,mt76x8-pinctrl.yaml | 42 spi, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt,
83 spi cs1, spis, uart0, uart1, uart2, wdt, wled_an,
239 enum: [uart1, uart2]
302 enum: [uart2]
379 const: uart2
383 enum: [uart2]
|
| H A D | ralink,mt7620-pinctrl.yaml | 47 spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -]
102 sdmode, spi, spi cs1, spis, uart0, uart1, uart2,
357 enum: [uart1, uart2]
452 enum: [uart2]
538 const: uart2
542 enum: [uart2]
|
| H A D | microchip,pic32-pinctrl.txt | 40 uart2-tx {
46 uart2-rx {
55 uart2: serial@1f822200 {
|
| H A D | rockchip,pinctrl.txt | 96 uart2 {
97 uart2_xfer: uart2-xfer {
104 uart2: serial@20064000 {
|
| /freebsd/sys/contrib/device-tree/src/arm/nxp/lpc/ |
| H A D | lpc4337-ciaa.dts | 24 serial0 = &uart2;
30 stdout-path = &uart2;
135 uart2_pins: uart2-pins {
138 function = "uart2";
145 function = "uart2";
211 &uart2 {
|
| /freebsd/sys/riscv/allwinner/ |
| H A D | d1_padconf.c | 36 …{ "PB0", 1, 0, { "gpio_in", "gpio_out", "pwm3", "ir", "i2c2", "spi1", "uart0", "uart2", "s…
37 …{ "PB1", 1, 1, { "gpio_in", "gpio_out", "pwm4", "i2s2", "i2c2", "i2s2", "uart0", "uart2", "i…
49 …{ "PC0", 2, 0, { "gpio_in", "gpio_out", "uart2", "i2c2", "ledc", NULL, NULL, NULL, NU…
50 …{ "PC1", 2, 1, { "gpio_in", "gpio_out", "uart2", "i2c2", NULL, NULL, NULL, NULL, NU…
58 …{ "PD1", 3, 1, { "gpio_in", "gpio_out", "lcd0", "lvds0", "dsi", "uart2", NULL, NULL, NU…
59 …{ "PD2", 3, 2, { "gpio_in", "gpio_out", "lcd0", "lvds0", "dsi", "uart2", NULL, NULL, NU…
60 …{ "PD3", 3, 3, { "gpio_in", "gpio_out", "lcd0", "lvds0", "dsi", "uart2", NULL, NULL, NU…
61 …{ "PD4", 3, 4, { "gpio_in", "gpio_out", "lcd0", "lvds0", "dsi", "uart2", NULL, NULL, NU…
80 …{ "PE0", 4, 0, { "gpio_in", "gpio_out", "ncsi0", "uart2", "i2c1", "lcd0", NULL, NULL, "e…
81 …{ "PE1", 4, 1, { "gpio_in", "gpio_out", "ncsi0", "uart2", "i2c1", "lcd0", NULL, NULL, "e…
[all …]
|
| /freebsd/sys/contrib/device-tree/src/mips/ingenic/ |
| H A D | cu1000-neo.dts | 14 serial2 = &uart2;
61 &uart2 {
186 pins_uart2: uart2 {
187 function = "uart2";
188 groups = "uart2-data-d";
|
| /freebsd/sys/contrib/device-tree/src/mips/mscc/ |
| H A D | jaguar2.dtsi | 13 serial1 = &uart2;
85 uart2: serial@70100800 { label
110 uart2_pins: uart2-pins {
112 function = "uart2";
|
| H A D | serval.dtsi | 84 uart2: serial@70100800 { label
119 uart2_pins: uart2-pins {
121 function = "uart2";
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/marvell/ |
| H A D | cp110-system-controller.txt | 99 mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
102 mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
128 mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
129 mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
141 mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
142 mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
152 mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
153 mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
|
| /freebsd/sys/contrib/device-tree/src/mips/pic32/ |
| H A D | pic32mzda_sk.dts | 75 &uart2 {
117 uart2-tx {
123 uart2-rx {
|
| /freebsd/sys/contrib/device-tree/src/arm64/bitmain/ |
| H A D | bm1880-sophon-edge.dts | 39 serial1 = &uart2;
160 pinctrl_uart2_default: pinctrl-uart2-default {
163 function = "uart2";
180 &uart2 {
|
| /freebsd/sys/contrib/device-tree/src/arm/socionext/ |
| H A D | uniphier-pinctrl.dtsi | 184 pinctrl_uart2: uart2 {
185 groups = "uart2";
186 function = "uart2";
|
| /freebsd/sys/contrib/device-tree/src/arm64/sprd/ |
| H A D | sc9836-openphone.dts | 20 serial2 = &uart2;
42 &uart2 {
|
| /freebsd/sys/contrib/device-tree/src/arm64/realtek/ |
| H A D | rtd1619-mjolnir.dts | 27 serial2 = &uart2;
42 &uart2 {
|
| /freebsd/sys/contrib/device-tree/src/arm/unisoc/ |
| H A D | rda8810pl-orangepi-2g-iot.dts | 17 serial1 = &uart2;
42 &uart2 {
|
| H A D | rda8810pl-orangepi-i96.dts | 16 serial0 = &uart2;
42 &uart2 {
|
| /freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
| H A D | am335x-bonegreen-common.dtsi | 25 uart2_pins: uart2-pins {
33 &uart2 {
|