| /linux/Documentation/hwmon/ |
| H A D | ltc4283.rst | 51 in1_min Undervoltage threshold
52 in1_max Overvoltage threshold
61 in2_min Undervoltage threshold
62 in2_max Overvoltage threshold
72 in3_min Undervoltage threshold
73 in3_max Overvoltage threshold
83 in4_min Undervoltage threshold
84 in4_max Overvoltage threshold
94 in5_min Undervoltage threshold
95 in5_max Overvoltage threshold
[all …]
|
| H A D | ltc2947.rst | 30 active as soon as a temperature reading is higher than a defined threshold. The
42 in0_min Undervoltage threshold
43 in0_max Overvoltage threshold
52 in1_min Undervoltage threshold
53 in1_max Overvoltage threshold
62 curr1_min Undercurrent threshold
63 curr1_max Overcurrent threshold
72 power1_min Low power threshold
73 power1_max High power threshold
82 temp1_min Low temperature threshold
[all …]
|
| H A D | smpro-hwmon.rst | 56 temp2_crit millicelsius RO SoC VRD HOT Threshold temperature
60 temp5_crit millicelsius RO MEM HOT Threshold for all DIMMs
62 temp6_crit millicelsius RO MEM HOT Threshold for all DIMMs
64 temp7_crit millicelsius RO MEM HOT Threshold for all DIMMs
66 temp8_crit millicelsius RO MEM HOT Threshold for all DIMMs
68 temp9_crit millicelsius RO MEM HOT Threshold for all DIMMs
70 temp10_crit millicelsius RO MEM HOT Threshold for all DIMMs
72 temp11_crit millicelsius RO MEM HOT Threshold for all DIMMs
74 temp12_crit millicelsius RO MEM HOT Threshold for all DIMMs
|
| H A D | ltc2945.rst | 57 in1_min Undervoltage threshold
58 in1_max Overvoltage threshold
66 in2_min Undervoltage threshold
67 in2_max Overvoltage threshold
75 curr1_min Undercurrent threshold
76 curr1_max Overcurrent threshold
85 power1_min Low lower threshold
86 power1_max High power threshold
|
| /linux/Documentation/ABI/testing/ |
| H A D | sysfs-bus-iio-adc-hi8435 | 6 Program sensor type for threshold detector inputs.
8 threshold detector input channel. Channels 0..7, 8..15, 16..23
16 Channel Y low voltage threshold. If sensor input voltage goes lower then
17 this value then the threshold falling event is pushed.
18 Depending on in_voltageY_sensing_mode the low voltage threshold
20 Channels 0..31 have common low threshold values, but could have different
23 The low voltage threshold range is between 2..21V.
27 If falling threshold results hysteresis to odd value then rising
28 threshold is automatically subtracted by one.
35 Channel Y high voltage threshold. If sensor input voltage goes higher then
[all …]
|
| /linux/tools/tracing/rtla/tests/ |
| H A D | osnoise.t | 19 "osnoise TOOL -P F:1 -c 0 -r 900000 -d 10s -S 1 --on-threshold shell,command=\"$testdir/scripts/check-priority.sh SCHED_FIFO 1\"" \
22 "osnoise TOOL -C -c 0 -r 900000 -d 10s -S 1 --on-threshold shell,command=\"$testdir/scripts/check-cgroup-match.sh\"" \
25 "osnoise TOOL -P F:1 -c 0 -r 900000 -d 10s -S 1 --on-threshold shell,command=$testdir/scripts/check-cpus.sh" 2 "^Affinity of threads: 0$"
27 "osnoise TOOL -P F:1 -H 0 -r 900000 -d 10s -S 1 --on-threshold shell,command=$testdir/scripts/check-housekeeping-cpus.sh" 2 "^Affinity of threads: 0$"
48 "osnoise top -q -S 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/period_us\"" \
51 "osnoise top -q -S 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/runtime_us\"" \
54 "osnoise top -q -S 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh tracing_thresh\"" \
57 "osnoise top -q -S 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/stop_tracing_us\"" \
60 "osnoise top -q -s 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/stop_tracing_total_us\"" \
65 "osnoise TOOL -p 2000000 -S 1 --on-threshold shel
[all...] |
| H A D | timerlat.t | 35 check "verify --aa-only stop on threshold" \
44 "timerlat TOOL -P F:1 -c 0 -d 10s -T 1 --on-threshold shell,command=\"$testdir/scripts/check-priority.sh SCHED_FIFO 1\"" \
47 "timerlat TOOL -k -C -c 0 -d 10s -T 1 --on-threshold shell,command=\"$testdir/scripts/check-cgroup-match.sh\"" \
50 "timerlat TOOL -c 0 -d 10s -T 1 --on-threshold shell,command=$testdir/scripts/check-cpus.sh" 2 "^Affinity of threads: 0$"
52 "timerlat TOOL -H 0 -d 10s -T 1 --on-threshold shell,command=$testdir/scripts/check-housekeeping-cpus.sh" 2 "^Affinity of threads: 0$"
54 "timerlat TOOL -k -c 0 -d 10s -T 1 --on-threshold shell,command=$testdir/scripts/check-user-kernel-threads.sh" 2 "1 kernel threads, 0 user threads"
56 "timerlat TOOL -u -c 0 -d 10s -T 1 --on-threshold shell,command=$testdir/scripts/check-user-kernel-threads.sh" 2 "0 kernel threads, 1 user threads"
61 "timerlat top -q -T 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/timerlat_period_us\"" \
64 "timerlat top -q -T 1 --on-threshold shell,command=\"$testdir/scripts/check-tracefs-value.sh osnoise/print_stack\"" \
67 "timerlat top -q -T 1 --on-threshold shel
[all...] |
| /linux/tools/perf/pmu-events/arch/x86/clearwaterforest/ |
| H A D | cache.json | 400 "BriefDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 1024.",
407 "PublicDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 1024. Available PDIST counters: 0,1",
412 "BriefDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 128.",
419 "PublicDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 128. Available PDIST counters: 0,1",
424 "BriefDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 16.",
431 "PublicDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 16. Available PDIST counters: 0,1",
436 "BriefDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 2048.",
443 "PublicDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 2048. Available PDIST counters: 0,1",
448 "BriefDescription": "Counts the number of tagged load uops retired that exceed the latency threshold of 256.",
455 "PublicDescription": "Counts the number of tagged load uops retired that exceed the latency threshold o
[all...] |
| /linux/Documentation/misc-devices/ |
| H A D | bh1770glc.rst | 26 low and high threshold interrupts.
34 Driver uses threshold interrupts to avoid need for polling the values.
36 by using a delayed work. As long as there is proximity threshold above
38 below the threshold value, there is no interrupt and the delayed work will
65 sysfs_notify called when threshold interrupt occurs
77 RW - HI level threshold value
84 RW - LO level threshold value
102 sysfs_notify called when threshold interrupt occurs
119 RW - Measurement rate (in Hz) when the level is above threshold
123 RW - Measurement rate (in Hz) when the level is below threshold
[all …]
|
| /linux/sound/soc/codecs/ |
| H A D | es83xx-dsm-common.h | 299 #define ADC_ALC_NGTHLD_m76_5db 0x00 /* Threshold = -76.5db */
300 #define ADC_ALC_NGTHLD_m75db 0x01 /* Threshold = -75db */
301 #define ADC_ALC_NGTHLD_m73_5db 0x02 /* Threshold = -73.5db */
302 #define ADC_ALC_NGTHLD_m72db 0x03 /* Threshold = -72db */
303 #define ADC_ALC_NGTHLD_m70_5db 0x04 /* Threshold = -70.5db */
304 #define ADC_ALC_NGTHLD_m69db 0x05 /* Threshold = -69db */
305 #define ADC_ALC_NGTHLD_m67_5db 0x06 /* Threshold = -67.5db */
306 #define ADC_ALC_NGTHLD_m66db 0x07 /* Threshold = -66db */
307 #define ADC_ALC_NGTHLD_m64_5db 0x08 /* Threshold = -64.5db */
308 #define ADC_ALC_NGTHLD_m63db 0x09 /* Threshold = -63db */
[all …]
|
| /linux/tools/perf/pmu-events/arch/powerpc/power8/ |
| H A D | pmc.json | 83 "BriefDescription": "Threshold counter exceeded a value of 1024",
89 "BriefDescription": "Threshold counter exceeded a value of 128",
95 "BriefDescription": "Threshold counter exceeded a value of 2048",
101 "BriefDescription": "Threshold counter exceed a count of 256",
107 "BriefDescription": "Threshold counter exceeded a value of 32",
113 "BriefDescription": "Threshold counter exceed a count of 4096",
119 "BriefDescription": "Threshold counter exceeded a value of 512",
126 "PublicDescription": "Threshold counter exceeded a value of 64"
131 "BriefDescription": "threshold exceeded",
137 "BriefDescription": "Threshold counter did not meet threshold",
|
| /linux/Documentation/devicetree/bindings/input/ |
| H A D | adc-keys.yaml | 25 keyup-threshold-microvolt:
45 press-threshold-microvolt:
48 two values of press-threshold-microvolt may be the same. All values
49 of press-threshold-microvolt must be less than
50 keyup-threshold-microvolt.
54 - press-threshold-microvolt
60 - keyup-threshold-microvolt
83 keyup-threshold-microvolt = <2000000>;
88 press-threshold-microvolt = <1500000>;
94 press-threshold-microvolt = <1000000>;
[all …]
|
| /linux/drivers/soc/tegra/fuse/ |
| H A D | speedo-tegra124.c | 51 int *threshold) in rev_sku_to_speedo_ids() argument
59 *threshold = THRESHOLD_INDEX_0; in rev_sku_to_speedo_ids()
77 *threshold = THRESHOLD_INDEX_0; in rev_sku_to_speedo_ids()
85 *threshold = THRESHOLD_INDEX_1; in rev_sku_to_speedo_ids()
93 *threshold = THRESHOLD_INDEX_1; in rev_sku_to_speedo_ids()
104 int i, threshold, soc_speedo_0_value; in tegra124_init_speedo_data() local
124 rev_sku_to_speedo_ids(sku_info, &threshold); in tegra124_init_speedo_data()
130 gpu_process_speedos[threshold][i]) in tegra124_init_speedo_data()
136 cpu_process_speedos[threshold][i]) in tegra124_init_speedo_data()
142 soc_process_speedos[threshold][i]) in tegra124_init_speedo_data()
|
| H A D | speedo-tegra114.c | 34 int *threshold) in rev_sku_to_speedo_ids() argument
47 *threshold = THRESHOLD_INDEX_0; in rev_sku_to_speedo_ids()
54 *threshold = THRESHOLD_INDEX_1; in rev_sku_to_speedo_ids()
61 *threshold = THRESHOLD_INDEX_0; in rev_sku_to_speedo_ids()
77 int threshold; in tegra114_init_speedo_data() local
85 rev_sku_to_speedo_ids(sku_info, &threshold); in tegra114_init_speedo_data()
91 if (cpu_speedo_val < cpu_process_speedos[threshold][i]) in tegra114_init_speedo_data()
96 if (soc_speedo_val < soc_process_speedos[threshold][i]) in tegra114_init_speedo_data()
|
| /linux/Documentation/admin-guide/media/ |
| H A D | si476x.rst | 42 crossed below the blend threshold
44 frequency is lower than threshold
46 frequency is lower than threshold
48 bandwidth is less than threshold
51 softmute threshold
91 0x00 mxhi 0 - FM Mixer PD high threshold is
93 1 - FM Mixer PD high threshold is
117 the Multipath high threshold
119 the Multipath high threshold
120 0x01 multlint ditto for Multipath low threshold
[all …]
|
| /linux/drivers/thermal/qcom/ |
| H A D | Kconfig | 10 Also able to set threshold temperature for both hot and cold and update
11 when a threshold is reached.
21 Thermal client sets threshold temperature for both warm and cool and
22 gets updated when a threshold is reached.
32 interrupt when the programmed threshold is crossed.
34 Temperature is read from the associated ADC channel, and threshold
44 Thermal client sets threshold temperature for both warm and cool and
45 gets updated when a threshold is reached.
|
| /linux/drivers/staging/axis-fifo/ |
| H A D | axis-fifo.txt | 41 - xlnx,rx-fifo-pe-threshold: RX programmable empty interrupt threshold
43 - xlnx,rx-fifo-pf-threshold: RX programmable full interrupt threshold
49 - xlnx,tx-fifo-pe-threshold: TX programmable empty interrupt threshold
51 - xlnx,tx-fifo-pf-threshold: TX programmable full interrupt threshold
83 xlnx,rx-fifo-pe-threshold = <0x2>;
84 xlnx,rx-fifo-pf-threshold = <0x1fb>;
89 xlnx,tx-fifo-pe-threshold = <0x200>;
90 xlnx,tx-fifo-pf-threshold = <0x7ffb>;
|
| /linux/tools/testing/selftests/drivers/net/mlxsw/ |
| H A D | sharedbuffer_configuration.py | 23 - random threshold
26 - random threshold
37 # For threshold of 16, this works out to be about 12MB on Spectrum-1,
48 # Threshold value could be any integer between 3 to 16
72 # The threshold type of pools 4, 8, 9 and 10 cannot be changed
110 # The threshold type of pools 4, 8, 9 and 10 cannot be changed
209 … err_msg = "Incorrect pool threshold type (got {}, expected {})".format(pool["thtype"], thtype)
223 # For each pool, set random size and static threshold type
231 varitems = ["pool", "threshold"]
278 if tcbind["threshold"] != th:
[all …]
|
| /linux/Documentation/devicetree/bindings/serial/ |
| H A D | st,stm32-uart.yaml | 64 rx-threshold:
66 If value is set to 1, RX FIFO threshold is disabled.
70 tx-threshold:
72 If value is set to 1, TX FIFO threshold is disabled.
106 rx-threshold: false
107 tx-threshold: false
128 rx-threshold = <4>;
129 tx-threshold = <4>;
|
| /linux/include/soc/canaan/ |
| H A D | k210-sysctl.h | 26 #define K210_SYSCTL_THR0 0x38 /* Clock threshold controller 0 */
27 #define K210_SYSCTL_THR1 0x3C /* Clock threshold controller 1 */
28 #define K210_SYSCTL_THR2 0x40 /* Clock threshold controller 2 */
29 #define K210_SYSCTL_THR3 0x44 /* Clock threshold controller 3 */
30 #define K210_SYSCTL_THR4 0x48 /* Clock threshold controller 4 */
31 #define K210_SYSCTL_THR5 0x4C /* Clock threshold controller 5 */
32 #define K210_SYSCTL_THR6 0x50 /* Clock threshold controller 6 */
|
| /linux/drivers/gpu/drm/xe/ |
| H A D | xe_gt_sriov_pf_monitor.c | 44 static int pf_handle_vf_threshold_event(struct xe_gt *gt, u32 vfid, u32 threshold) in pf_handle_vf_threshold_event() argument
49 e = xe_guc_klv_threshold_key_to_index(threshold); in pf_handle_vf_threshold_event()
54 xe_gt_sriov_notice(gt, "unknown threshold key %#x reported for %s\n", in pf_handle_vf_threshold_event()
55 threshold, origin); in pf_handle_vf_threshold_event()
59 xe_gt_sriov_dbg(gt, "%s exceeded threshold %u %s\n", in pf_handle_vf_threshold_event()
61 xe_guc_klv_key_to_string(threshold)); in pf_handle_vf_threshold_event()
82 u32 threshold; in xe_gt_sriov_pf_monitor_process_guc2pf() local
100 threshold = FIELD_GET(GUC2PF_ADVERSE_EVENT_EVENT_MSG_2_THRESHOLD, msg[2]); in xe_gt_sriov_pf_monitor_process_guc2pf()
105 return pf_handle_vf_threshold_event(gt, vfid, threshold); in xe_gt_sriov_pf_monitor_process_guc2pf()
|
| /linux/Documentation/arch/arm64/ |
| H A D | perf.rst | 168 Event Counting Threshold
175 events whose count meets a specified threshold condition. For example if
177 threshold is set to 2, then the PMU counter will now only increment by
181 To increment by 1 after passing the threshold condition instead of the
195 * - threshold
196 - Value to threshold the event by. A value of 0 means that
206 - If this is set, count by 1 after passing the threshold condition
209 The threshold, threshold_compare and threshold_count values can be
214 perf stat -e stall_slot/threshold=2,threshold_compare=2/ \
215 -e dtlb_walk/threshold=10,threshold_compare=3,threshold_count/
[all …]
|
| /linux/Documentation/driver-api/thermal/ |
| H A D | exynos_thermal.rst | 48 The maximum number of configurable threshold is five.
49 The threshold levels are defined as follows::
51 Level_0: current temperature > trigger_level_0 + threshold
52 Level_1: current temperature > trigger_level_1 + threshold
53 Level_2: current temperature > trigger_level_2 + threshold
54 Level_3: current temperature > trigger_level_3 + threshold
56 The threshold and each trigger_level are set
|
| /linux/drivers/cpuidle/governors/ |
| H A D | ladder.c | 32 } threshold; member
90 last_residency > last_state->threshold.promotion_time_ns && in ladder_select_state()
94 if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) { in ladder_select_state()
115 last_residency < last_state->threshold.demotion_time_ns) { in ladder_select_state()
118 if (last_state->stats.demotion_count >= last_state->threshold.demotion_count) { in ladder_select_state()
151 lstate->threshold.promotion_count = PROMOTION_COUNT; in ladder_enable_device()
152 lstate->threshold.demotion_count = DEMOTION_COUNT; in ladder_enable_device()
155 lstate->threshold.promotion_time_ns = state->exit_latency_ns; in ladder_enable_device()
157 lstate->threshold.demotion_time_ns = state->exit_latency_ns; in ladder_enable_device()
|
| /linux/drivers/md/persistent-data/ |
| H A D | dm-space-map-metadata.c | 22 * An edge triggered threshold.
24 struct threshold { struct
27 dm_block_t threshold; argument
33 static void threshold_init(struct threshold *t) in threshold_init() argument
39 static void set_threshold(struct threshold *t, dm_block_t value, in set_threshold()
43 t->threshold = value; in set_threshold()
48 static bool below_threshold(struct threshold *t, dm_block_t value) in below_threshold()
50 return t->threshold_set && value <= t->threshold; in below_threshold()
53 static bool threshold_already_triggered(struct threshold *t) in threshold_already_triggered()
58 static void check_threshold(struct threshold *t, dm_block_t value) in check_threshold()
[all …]
|