| /linux/Documentation/devicetree/bindings/sound/ |
| H A D | hisilicon,hi6210-i2s.txt | 31 clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
32 <&sys_ctrl HI6220_BBPPLL0_DIV>;
36 hisilicon,sysctrl-syscon = <&sys_ctrl>;
|
| /linux/drivers/gpu/drm/imx/dcss/ |
| H A D | dcss-dpr.c | 104 u32 sys_ctrl; member
328 u32 sys_ctrl; in dcss_dpr_enable() local
330 sys_ctrl = (en ? REPEAT_EN | RUN_EN : 0); in dcss_dpr_enable()
338 if (ch->sys_ctrl != sys_ctrl) in dcss_dpr_enable()
341 ch->sys_ctrl = sys_ctrl; in dcss_dpr_enable()
524 ch->sys_ctrl, in dcss_dpr_write_sysctrl()
|
| /linux/Documentation/devicetree/bindings/clock/ |
| H A D | hi6220-clock.txt | 35 sys_ctrl: sys_ctrl@f7030000 {
|
| /linux/drivers/input/touchscreen/ |
| H A D | iqs7211.c | 344 u8 sys_ctrl; member
384 .sys_ctrl = 0x35,
422 .sys_ctrl = 0x50,
459 .sys_ctrl = 0x33,
1477 error = iqs7211_read_word(iqs7211, dev_desc->sys_ctrl + 1, in iqs7211_start_comms()
1487 error = iqs7211_write_word(iqs7211, dev_desc->sys_ctrl + 1, in iqs7211_start_comms()
1509 error = iqs7211_write_word(iqs7211, dev_desc->sys_ctrl + 1, in iqs7211_start_comms()
1524 __le16 sys_ctrl[] = { in iqs7211_init_device() local
1535 error = iqs7211_write_burst(iqs7211, dev_desc->sys_ctrl, sys_ctrl, in iqs7211_init_device()
1536 sizeof(sys_ctrl)); in iqs7211_init_device()
[all …]
|
| /linux/Documentation/devicetree/bindings/phy/ |
| H A D | hisilicon,hi6220-usb-phy.yaml | 34 hisilicon,peripheral-syscon = <&sys_ctrl>;
|
| /linux/Documentation/devicetree/bindings/thermal/ |
| H A D | hisilicon,tsensor.yaml | 54 clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
|
| /linux/drivers/mmc/host/ |
| H A D | sdhci-esdhc-imx.c | 1084 u32 ctrl, tuning_ctrl, sys_ctrl; in esdhc_reset_tuning() local
1108 sys_ctrl = readl(host->ioaddr + ESDHC_SYSTEM_CONTROL); in esdhc_reset_tuning()
1109 sys_ctrl |= ESDHC_SYS_CTRL_RESET_TUNING; in esdhc_reset_tuning()
1110 writel(sys_ctrl, host->ioaddr + ESDHC_SYSTEM_CONTROL); in esdhc_reset_tuning()
1171 u32 reg, sys_ctrl; in esdhc_prepare_tuning() local
1196 sys_ctrl = readl(host->ioaddr + ESDHC_SYSTEM_CONTROL); in esdhc_prepare_tuning()
1197 sys_ctrl |= ESDHC_SYS_CTRL_RST_FIFO; in esdhc_prepare_tuning()
1198 writel(sys_ctrl, host->ioaddr + ESDHC_SYSTEM_CONTROL); in esdhc_prepare_tuning()
1199 ret = readl_poll_timeout(host->ioaddr + ESDHC_SYSTEM_CONTROL, sys_ctrl, in esdhc_prepare_tuning()
1200 !(sys_ctrl & ESDHC_SYS_CTRL_RST_FIFO), 10, 100); in esdhc_prepare_tuning()
|
| /linux/Documentation/devicetree/bindings/arm/ |
| H A D | arm,coresight-cpu-debug.yaml | 77 clocks = <&sys_ctrl 1>;
|
| /linux/include/linux/mfd/ |
| H A D | stmfx.h | 105 * @bkp_sysctrl: backup of SYS_CTRL register for suspend/resume
|
| /linux/drivers/net/wireless/mediatek/mt76/mt76x0/ |
| H A D | init.c | 114 /* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */ in mt76x0_init_mac_registers()
|
| /linux/Documentation/devicetree/bindings/arm/bcm/ |
| H A D | brcm,brcmstb.txt | 104 the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
|
| /linux/drivers/clk/sophgo/ |
| H A D | clk-sg2042-rpgate.c | 86 * registers are defined in SYS_CTRL.
|
| /linux/arch/arm64/boot/dts/hisilicon/ |
| H A D | hi6220-hikey.dts | 268 assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
|
| /linux/drivers/mfd/ |
| H A D | stmpe.c | 899 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */ in stmpe_reset()
902 /* all other STMPE variant use bit 7 of SYS_CTRL register */ in stmpe_reset()
|