| /freebsd/sys/contrib/device-tree/Bindings/mailbox/ |
| H A D | ti,omap-mailbox.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mailbox/t
[all...] |
| H A D | omap-mailbox.txt | 1 OMAP2+ and K3 Mailbox
4 The OMAP mailbox hardware facilitates communication between different processors
5 using a queued mailbox interrupt mechanism. The IP block is external to the
10 Each mailbox IP block/cluster has a certain number of h/w fifo queues and output
25 routed to different processor sub-systems on DRA7xx as they are routed through
35 Mailbox Device Node:
37 A Mailbox device node is used to represent a Mailbox IP instance/cluster within
38 a SoC. The sub-mailboxes are represented as child nodes of this parent node.
41 --------------------
42 - compatible: Should be one of the following,
[all …]
|
| H A D | mtk-gce.txt | 8 CMDQ driver uses mailbox framework for communication. Please refer to
9 mailbox.txt for generic information about mailbox device-tree bindings.
12 - compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce",
13 "mediatek,mt8186-gce", "mediatek,mt8192-gce", "mediatek,mt8195-gce" or
14 "mediatek,mt6779-gce".
15 - reg: Address range of the GCE unit
16 - interrupts: The interrupt signal from the GCE block
17 - clock: Clocks according to the common clock binding
18 - clock-names: Must be "gce" to stand for GCE clock
19 - #mbox-cells: Should be 2.
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/remoteproc/ |
| H A D | ti,omap-remoteproc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/ti,omap-remotepro
[all...] |
| H A D | ti,k3-dsp-rproc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Suman Anna <s-anna@ti.com>
13 The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
14 that are used to offload some of the processor-intensive tasks or algorithms,
17 These processor sub-systems usually contain additional sub-modules like
23 Each DSP Core sub-system is represented as a single DT node. Each node has a
31 - ti,am62a-c7xv-dsp
[all …]
|
| H A D | ti,k3-m4f-rproc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/ti,k3-m4f-rproc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hari Nagalla <hnagalla@ti.com>
11 - Mathieu Poirier <mathieu.poirier@linaro.org>
20 $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
25 - ti,am64-m4fss
27 power-domains:
30 "#address-cells":
[all …]
|
| H A D | ti,k3-r5f-rproc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5
[all...] |
| H A D | qcom,sc7280-mss-pil.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sibi Sankar <quic_sibis@quicinc.com>
19 - qcom,sc7280-mss-pil
23 - description: MSS QDSP6 registers
24 - description: RMB registers
26 reg-names:
28 - const: qdsp6
[all …]
|
| H A D | qcom,sc7180-mss-pil.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sibi Sankar <quic_sibis@quicinc.com>
19 - qcom,sc7180-mss-pil
23 - description: MSS QDSP6 registers
24 - description: RMB registers
26 reg-names:
28 - const: qdsp6
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/ |
| H A D | arm,scmi.txt | 2 ----------------------------------------------------------
17 - compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports
18 - mboxes: List of phandle and mailbox channel specifiers. It should contain
22 - shmem : List of phandle pointing to the shared memory(SHM) area as per
23 generic mailbox client binding.
24 - #address-cells : should be '1' if the device has sub-nodes, maps to
25 protocol identifier for a given sub-node.
26 - #size-cells : should be '0' as 'reg' property doesn't have any size
28 - arm,smc-id : SMC id required when using smc or hvc transports
32 - mbox-names: shall be "tx" or "rx" depending on mboxes entries.
[all …]
|
| H A D | arm,scpi.txt | 2 ----------------------------------------------------------
10 - compatible : should be
12 * "arm,scpi-pre-1.0" : For implementations complying to all
14 - mboxes: List of phandle and mailbox channel specifiers
17 - shmem : List of phandle pointing to the shared memory(SHM) area between the
18 processors using these mailboxes for IPC, one for each mailbox
22 See Documentation/devicetree/bindings/mailbox/mailbox.txt
23 for more details about the generic mailbox controller and
27 ------------------------------------------------------------
34 - compatible : should be "arm,scpi-clocks"
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/firmware/ |
| H A D | arm,scmi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Sudeep Holla <sudeep.holla@arm.com>
26 - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
34 - description: SCMI compliant firmware with mailbox transport
36 - const: arm,scmi
37 - description: SCMI compliant firmware with ARM SMC/HVC transport
39 - const: arm,scmi-smc
40 - description: SCMI compliant firmware with ARM SMC/HVC transport
[all …]
|
| H A D | arm,scpi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Sudeep Holla <sudeep.holla@arm.com>
33 - const: arm,scpi # SCPI v1.0 and above
34 - const: arm,scpi-pre-1.0 # Unversioned SCPI before v1.0
35 - items:
36 - enum:
37 - amlogic,meson-gxbb-scpi
38 - const: arm,scpi-pre-1.0
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/power/reset/ |
| H A D | xlnx,zynqmp-power.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-powe
[all...] |
| H A D | xlnx,zynqmp-power.txt | 1 --------------------------------------------------------------------
3 --------------------------------------------------------------------
4 The zynqmp-power node describes the power management configurations.
8 - compatible: Must contain: "xlnx,zynqmp-power"
9 - interrupts: Interrupt specifier
12 - mbox-names : Name given to channels seen in the 'mboxes' property.
13 "tx" - Mailbox corresponding to transmit path
14 "rx" - Mailbox corresponding to receive path
15 - mboxes : Standard property to specify a Mailbox. Each value of
17 mailbox controller device node and an args specifier
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/keystone/ |
| H A D | ti,sci.txt | 1 Texas Instruments System Control Interface (TI-SCI) Message Protocol
2 --------------------------------------------------------------------
16 TI-SCI controller Device Node:
19 The TI-SCI node describes the Texas Instrument's System Controller entity node.
23 relationship between the TI-SCI parent node to the child node.
26 -------------------
27 - compatible: should be "ti,k2g-sci" for TI 66AK2G SoC
28 should be "ti,am654-sci" for for TI AM654 SoC
29 - mbox-names:
30 "rx" - Mailbox corresponding to receive path
[all …]
|
| /freebsd/usr.sbin/bhyve/amd64/ |
| H A D | pci_gvt-d-opregion.h | 7 Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
8 SPDX-License-Identifier: BSD-2-Clause-Patent
14 …* <https://github.com/tianocore/edk2-platforms/blob/82979ab1ca44101e0b92a9c4bda1dfe64a8249f6/Silic…
32 Sub-structures define the different parts of the OpRegion followed by the
41 /// OpRegion Mailbox 0 Header structure. The OpRegion Header is used to
60 /// OpRegion Mailbox 1 - Public ACPI Methods
88 uint8_t rm12[4]; ///< Offset 0x1FC - 0x1FF Reserved Must be zero
92 /// OpRegion Mailbox 2 - Software SCI Interface
99 uint8_t rm21[0xF4]; ///< Offset 0x20C - 0x2FF Reserved Must be zero
103 /// OpRegion Mailbox 3 - BIOS/Driver Notification - ASLE Support
[all …]
|
| /freebsd/secure/lib/libcrypto/man/man3/ |
| H A D | X509_check_host.3 | 1 .\" -*- mode: troff; coding: utf-8 -*-
58 .TH X509_CHECK_HOST 3ossl 2025-09-30 3.5.4 OpenSSL
64 X509_check_host, X509_check_email, X509_check_ip, X509_check_ip_asc \- X.509 certificate matching
89 and they match only in the left-most label; but they may match
96 domain names must be given in A\-label form. The \fBnamelen\fR argument
100 valid for any sub-domain of \fBname\fR, (see also
110 email \fBaddress\fR. The mailbox syntax of RFC 822 is supported,
112 characters. The mailbox syntax of RFC 6531 is supported for
115 is made to convert from A\-label to U\-label before comparison.
127 \&\fBX509_check_ip_asc()\fR is similar, except that the NUL-terminated
[all …]
|
| /freebsd/crypto/openssl/doc/man3/ |
| H A D | X509_check_host.pod | 5 X509_check_host, X509_check_email, X509_check_ip, X509_check_ip_asc - X.509 certificate matching
30 and they match only in the left-most label; but they may match
37 domain names must be given in A-label form. The B<namelen> argument
41 valid for any sub-domain of B<name>, (see also
51 email B<address>. The mailbox syntax of RFC 822 is supported,
53 characters. The mailbox syntax of RFC 6531 is supported for
56 is made to convert from A-label to U-label before comparison.
68 X509_check_ip_asc() is similar, except that the NUL-terminated
118 values which start with ".", that would otherwise match any sub-domain
119 in the peer certificate, to only match direct child sub-domains.
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/usb/ |
| H A D | omap-usb.txt | 4 - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
5 - ti,hwmods : must be "usb_otg_hs"
6 - multipoint : Should be "1" indicating the musb controller supports
7 multipoint. This is a MUSB configuration-specific setting.
8 - num-eps : Specifies the number of endpoints. This is also a
9 MUSB configuration-specific setting. Should be set to "16"
10 - ram-bits : Specifies the ram address size. Should be set to "12"
11 - interface-type : This is a board specific setting to describe the type of
14 - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
16 - power : Should be "50". This signifies the controller can supply up to
[all …]
|
| /freebsd/share/vt/keymaps/ |
| H A D | us.macbook.kbd | 1 # by Willian Theesfeld Jr <wtheesfeld@mailbox.org>
5 # ------------------------------------------------------------------
18 012 '-' '_' us us '-' '_' us us O
50 044 'z' 'Z' sub sub 'z' 'Z' sub sub C
80 074 fkey52 '-' '-' '-' '-' '-' '-' '-' N
|
| /freebsd/share/syscons/keymaps/ |
| H A D | us.iso.macbook.kbd | 1 # by Willian Theesfeld Jr <wtheesfeld@mailbox.org>
5 # ------------------------------------------------------------------
18 012 '-' '_' us us '-' '_' us us O
50 044 'z' 'Z' sub sub 'z' 'Z' sub sub C
80 074 fkey52 '-' '-' '-' '-' '-' '-' '-' N
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/freescale/ |
| H A D | fsl,scu.txt | 2 --------------------------------------------------------------------
4 The System Controller Firmware (SCFW) is a low-level system function
5 which runs on a dedicated Cortex-M core to provide power, clock, and
9 The AP communicates with the SC using a multi-ported MU module found
22 -------------------
23 - compatible: should be "fsl,imx-scu".
24 - mbox-names: should include "tx0", "tx1", "tx2", "tx3",
27 - mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
50 See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
51 for detailed mailbox binding.
[all …]
|
| /freebsd/sys/contrib/dev/athk/ath10k/ |
| H A D | targaddrs.h | 1 /* SPDX-License-Identifier: ISC */
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2016 Qualcomm Atheros, Inc.
36 * Pointer to application-defined area, if any.
50 * General-purpose flag bits, similar to SOC_OPTION_* flags.
103 u32 hi_num_bpatch_streams; /* 0x70 -- unused */
124 * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
143 /* 0xbc - [31:0]: idle timeout in ms */
150 /* If non-zero, override values sent to Host in WMI_READY event. */
177 /* Interconnect-specific state */
[all …]
|
| /freebsd/contrib/sendmail/src/ |
| H A D | parseaddr.c | 2 * Copyright (c) 1998-2006 Proofpoint, Inc. and its suppliers.
4 * Copyright (c) 1983, 1995-1997 Eric P. Allman. All rights reserved.
16 SM_RCSID("@(#)$Id: parseaddr.c,v 8.407 2013-11-22 20:51:56 ca Exp $")
32 ** PARSEADDR -- Parse an address
43 ** of 'berkeley' -- to be transmitted over the arpanet.
46 ** addr -- the address to parse. [i]
47 ** a -- a pointer to the address descriptor buffer.
49 ** flags -- describe detail for parsing. See RF_ definitions
51 ** delim -- the character to terminate the address, passed
53 ** delimptr -- if non-NULL, set to the location of the
[all …]
|