Home
last modified time | relevance | path

Searched +full:spi +full:- +full:tx +full:- +full:delay +full:- +full:us (Results 1 – 25 of 161) sorted by relevance

1234567

/freebsd/sys/contrib/device-tree/Bindings/spi/
H A Dspi-peripheral-props.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Peripheral-specific properties for a SPI bus.
10 Many SPI controllers need to add properties to peripheral devices. They could
11 be common properties like spi-max-frequency, spi-cpha, etc. or they could be
12 controller specific like delay in clock or data lines, etc. These properties
13 need to be defined in the peripheral node because they are per-peripheral and
19 - Mark Brown <broonie@kernel.org>
[all …]
/freebsd/sys/contrib/device-tree/Bindings/input/rmi4/
H A Drmi_spi.txt1 Synaptics RMI4 SPI Device Binding
5 bindings for devices using the SPI transport driver. Complete documentation
10 - compatible: syna,rmi4-spi
11 - reg: Chip select address for the device
12 - #address-cells: Set to 1 to indicate that the function child nodes
14 - #size-cells: Set to 0 to indicate that the function child nodes do not
18 - interrupts: interrupt which the rmi device is connected to.
19 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
21 - spi-rx-delay-us: microsecond delay after a read transfer.
22 - spi-tx-delay-us: microsecond delay after a write transfer.
[all …]
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/
H A Dimx6qp-prtwd3.dts1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
16 stdout-path = &uart4;
29 clock_ksz8081: clock-ksz8081 {
30 compatible = "fixed-clock";
31 #clock-cells = <0>;
32 clock-frequency = <50000000>;
35 clock_ksz9031: clock-ksz9031 {
36 compatible = "fixed-clock";
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/qcom/
H A Dmsm8998.dtsi1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
6 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
7 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
8 #include <dt-bindings/clock/qcom,rpmcc.h>
9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/power/qcom-rpmpd.h>
11 #include <dt-bindings/gpio/gpio.h>
14 interrupt-parent = <&intc>;
[all …]
H A Dsm8350.dtsi1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/interconnect/qcom,sm8350.h>
7 #include <dt-bindings/interrupt-controller/arm-gic.h>
8 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
9 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
10 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
11 #include <dt-bindings/clock/qcom,rpmh.h>
12 #include <dt-bindings/dma/qcom-gpi.h>
13 #include <dt-bindings/firmware/qcom,scm.h>
14 #include <dt-bindings/gpio/gpio.h>
[all …]
H A Dsm8150.dtsi1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
7 #include <dt-bindings/dma/qcom-gpi.h>
8 #include <dt-bindings/firmware/qcom,scm.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/phy/phy-qcom-qmp.h>
11 #include <dt-bindings/power/qcom-rpmpd.h>
12 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
13 #include <dt-bindings/clock/qcom,rpmh.h>
14 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
[all …]
H A Dx1e80100.dtsi1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/clock/qcom,rpmh.h>
7 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
8 #include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
9 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
10 #include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
11 #include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
12 #include <dt-bindings/dma/qcom-gpi.h>
13 #include <dt-bindings/interconnect/qcom,icc.h>
14 #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/mediatek/
H A Dmt7986a-acelink-ew-7886cax.dts1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
3 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/leds/common.h>
11 compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
12 model = "Acelink EW-7886CAX";
19 stdout-path = "serial0:115200n8";
28 compatible = "gpio-keys";
30 key-restart {
[all …]
H A Dmt8395-kontron-3-5-sbc-i1200.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 /dts-v1/;
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
16 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
17 #include <dt-bindings/spmi/spmi.h>
20 model = "Kontron 3.5\"-SBC-i1200";
21 compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195";
[all …]
H A Dmt8195.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/clock/mt8195-clk.h>
9 #include <dt-bindings/gce/mt8195-gce.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/memory/mt8195-memory-port.h>
13 #include <dt-bindings/phy/phy.h>
14 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
15 #include <dt-bindings/power/mt8195-power.h>
[all …]
H A Dmt7986a-bananapi-bpi-r3.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 * Frank Wunderlich <frank-w@public-files.de>
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/pinctrl/mt65xx.h>
18 model = "Bananapi BPI-R3";
19 chassis-type = "embedded";
20 compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
[all …]
/freebsd/sys/contrib/device-tree/src/arm/st/
H A Dstm32mp151c-mect1s.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
6 /dts-v1/;
10 #include "stm32mp15-pinctrl.dtsi"
11 #include "stm32mp15xxaa-pinctrl.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/leds/common.h>
21 stdout-path = "serial0:1500000n8";
33 v3v3: regulator-v3v3 {
34 compatible = "regulator-fixed";
[all …]
H A Dstm32mp151a-prtt1c.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
6 /dts-v1/;
8 #include "stm32mp151a-prtt1l.dtsi"
14 clock_ksz9031: clock-ksz9031 {
15 compatible = "fixed-clock";
16 #clock-cells = <0>;
17 clock-frequency = <25000000>;
20 clock_sja1105: clock-sja1105 {
21 compatible = "fixed-clock";
22 #clock-cells = <0>;
[all …]
/freebsd/sys/contrib/device-tree/src/powerpc/
H A Dac14xx.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
14 #address-cells = <1>;
15 #size-cells = <1>;
26 timebase-frequency = <40000000>; /* 40 MHz (csb/4) */
27 bus-frequency = <160000000>; /* 160 MHz csb bus */
28 clock-frequency = <400000000>; /* 400 MHz ppc core */
49 compatible = "cfi-flash";
51 #address-cells = <1>;
52 #size-cells = <1>;
53 bank-width = <2>;
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/freescale/
H A Dimx8mm-phyboard-polis-rdk.dts1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
12 #include "imx8mm-phycore-som.dtsi"
15 model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK";
16 compatible = "phytec,imx8mm-phyboard-polis-rdk",
17 "phytec,imx8mm-phycore-som", "fsl,imx8mm";
20 stdout-path = &uart3;
[all …]
H A Dimx8mp-msc-sm2s.dtsi1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
9 #include <dt-bindings/net/ti-dp83867.h>
18 stdout-path = &uart2;
21 reg_usb0_host_vbus: regulator-usb0-vbus {
22 compatible = "regulator-fixed";
23 regulator-name = "usb0_host_vbus";
24 pinctrl-names = "default";
25 pinctrl-0 = <&pinctrl_usb0_vbus>;
26 regulator-min-microvolt = <5000000>;
[all …]
H A Dimx8mq-kontron-pitx-imx8m.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree File for the Kontron pitx-imx8m board.
8 /dts-v1/;
11 #include <dt-bindings/net/ti-dp83867.h>
14 model = "Kontron pITX-imx8m";
15 compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
31 stdout-pat
[all...]
H A Dimx8mp-beacon-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
18 reg_wl_bt: regulator-wifi-bt {
19 compatible = "regulator-fixed";
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_reg_wl_bt>;
22 regulator-name = "wl-bt-pow-dwn";
23 regulator-min-microvolt = <3300000>;
24 regulator-max-microvolt = <3300000>;
26 startup-delay-us = <70000>;
27 regulator-always-on;
[all …]
H A Dimx8mm-phycore-som.dtsi1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/net/ti-dp83867.h>
11 model = "PHYTEC phyCORE-i.MX8MM";
12 compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
24 reg_vdd_3v3_s: regulator-vdd-
[all...]
/freebsd/sys/contrib/device-tree/src/arm64/ti/
H A Dk3-am64-phycore-som.dtsi1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
3 * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com
6 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
10 * https://www.phytec.com/product/phycore-am64x
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/net/ti-dp83867.h>
18 model = "PHYTEC phyCORE-AM64x";
19 compatible = "phytec,am64-phycore-som", "ti,am642";
32 reserved_memory: reserved-memory {
[all …]
H A Dk3-am642-sr-som.dtsi1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
7 #include <dt-bindings/net/ti-dp83869.h>
11 compatible = "solidrun,am642-sr-som", "ti,am642";
24 stdout-path = "serial2:115200n8";
29 compatible = "ti,am642-icssg-prueth";
30 pinctrl-names = "default";
31 pinctrl-0 = <&pru_rgmii1_default_pins>, <&pru_rgmii2_default_pins>;
35 firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
36 "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/allwinner/
H A Dsun50i-h6-pine-h64.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
6 #include "sun50i-h6.dtsi"
7 #include "sun50i-h6-cpu-opp.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
13 compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
22 stdout-path = "serial0:115200n8";
25 ext_osc32k: ext-osc32k-clk {
26 #clock-cells = <0>;
27 compatible = "fixed-clock";
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/rockchip/
H A Drk3568-rock-3b.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include <dt-bindings/soc/rockchip,vop2.h>
13 compatible = "radxa,rock-3b", "rockchip,rk3568";
24 stdout-path = "serial2:1500000n8";
27 hdmi-con {
28 compatible = "hdmi-connector";
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/amlogic/
H A Dmeson-g12b-odroid-n2.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include "meson-g12b-odroid.dtsi"
14 dio2133: audio-amplifier-0 {
15 compatible = "simple-audio-amplifier";
16 enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
17 VCC-supply = <&vcc_5v>;
18 sound-name-prefix = "U19";
22 hub_5v: regulator-hub-5v {
23 compatible = "regulator-fixed";
24 regulator-name = "HUB_5V";
[all …]
/freebsd/sys/contrib/device-tree/src/arm64/nvidia/
H A Dtegra210.dtsi1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/clock/tegra210-car.h>
3 #include <dt-bindings/gpio/tegra-gpio.h>
4 #include <dt-bindings/memory/tegra210-mc.h>
5 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
6 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
7 #include <dt-bindings/reset/tegra210-car.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/thermal/tegra124-soctherm.h>
10 #include <dt-bindings/soc/tegra-pmc.h>
[all …]

1234567