| /freebsd/sys/contrib/device-tree/Bindings/iio/adc/ |
| H A D | st,spear600-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jonathan Cameron <jic23@kernel.org>
14 10-bit resolution. Datasheet can be found here:
20 - st,spear600-adc
28 sampling-frequency:
33 Default sampling frequency of the ADC in Hz.
35 vref-external:
[all …]
|
| H A D | vf610-adc.txt | 7 - compatible: Should contain "fsl,vf610-adc"
8 - reg: Offset and length of the register set for the device
9 - interrupts: Should contain the interrupt for the device
10 - clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
11 - clock-names: Must contain "adc", matching entry in the clocks property.
12 - vref-supply: The regulator supply ADC reference voltage.
15 - fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
17 - Frequency in normal mode (ADLPC=0, ADHSC=0)
18 - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
19 - Frequency in low-power mode (ADLPC=1, ADHSC=0)
[all …]
|
| H A D | adi,ad7768-1.txt | 1 Analog Devices AD7768-1 ADC device driver
3 Required properties for the AD7768-1:
5 - compatible: Must be "adi,ad7768-1"
6 - reg: SPI chip select number for the device
7 - spi-max-frequency: Max SPI frequency to use
8 see: Documentation/devicetree/bindings/spi/spi-bus.txt
9 - clocks: phandle to the master clock (mclk)
10 see: Documentation/devicetree/bindings/clock/clock-bindings.txt
11 - clock-names: Must be "mclk".
12 - interrupts: IRQ line for the ADC
[all …]
|
| H A D | fsl,vf610-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Haibo Chen <haibo.chen@nxp.com>
18 - items:
19 - enum:
20 - fsl,imx6sx-adc
21 - fsl,imx6ul-adc
22 - const: fsl,vf610-adc
[all …]
|
| H A D | microchip,mcp3911.yaml | 1 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Marcus Folkesson <marcus.folkesson@gmail.com>
12 - Kent Gustavsson <nedo80@gmail.com>
21 - microchip,mcp3910
22 - microchip,mcp3911
23 - microchip,mcp3912
24 - microchip,mcp3913
25 - microchip,mcp3914
[all …]
|
| H A D | adi,ad7606.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analog Devices AD7606 Simultaneous Sampling ADC
10 - Michael Hennerich <michael.hennerich@analog.com>
13 Analog Devices AD7606 Simultaneous Sampling ADC
14 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
15 https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
16 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
[all …]
|
| H A D | adi,ad4030.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
5 ---
7 $schema: http://devicetree.org/meta-schemas/core.yaml#
12 - Michael Hennerich <michael.hennerich@analog.com>
13 - Nuno Sa <nuno.sa@analog.com>
19 * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
20 * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
21 * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf
26 - adi,ad4030-24
27 - adi,ad4032-24
[all …]
|
| H A D | ti,lmp92064.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Leonard Göhrs <l.goehrs@pengutronix.de>
16 The device contains two ADCs to allow simultaneous sampling of voltage and
22 - ti,lmp92064
27 vdd-supply:
30 vdig-supply:
34 shunt-resistor-micro-ohms:
40 reset-gpios:
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/staging/iio/adc/ |
| H A D | spear-adc.txt | 4 - compatible: Should be "st,spear600-adc"
5 - reg: Address and length of the register set for the device
6 - interrupts: Should contain the ADC interrupt
7 - sampling-frequency: Default sampling frequency
10 - vref-external: External voltage reference in milli-volts. If omitted
12 - average-samples: Number of samples to generate an average value. If
18 compatible = "st,spear600-adc";
20 interrupt-parent = <&vic1>;
22 sampling-frequency = <5000000>;
23 vref-external = <2500>; /* 2.5V VRef */
|
| /freebsd/sys/contrib/device-tree/Bindings/sound/ |
| H A D | nvidia,tegra210-sfc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 The Sampling Frequency Converter (SFC) converts the sampling frequency
11 of the input signal from one frequency to another. It supports sampling
12 frequency conversions of streams of up to two channels (stereo).
15 - Jon Hunter <jonathanh@nvidia.com>
16 - Mohan Kumar <mkumard@nvidia.com>
17 - Sameer Pujar <spujar@nvidia.com>
[all …]
|
| H A D | nvidia,tegra186-asrc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
11 of the input signal from one frequency to another. It can handle over a
21 - Jon Hunter <jonathanh@nvidia.com>
22 - Mohan Kumar <mkumard@nvidia.com>
23 - Sameer Pujar <spujar@nvidia.com>
26 - $ref: dai-common.yaml#
[all …]
|
| H A D | xlnx,spdif.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
13 - Vincenzo Frascino <vincenzo.frascino@arm.com>
16 - $ref: dai-common.yaml#
21 - xlnx,spdif-2.0
28 - description: SPDIF audio interrupt
30 clock-names:
32 - const: aud_clk_i
33 - const: s_axi_aclk
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/mmc/ |
| H A D | cavium-mmc.txt | 10 - compatible : should be one of:
11 cavium,octeon-6130-mmc
12 cavium,octeon-7890-mmc
13 cavium,thunder-8190-mmc
14 cavium,thunder-8390-mmc
15 mmc-slot
16 - reg : mmc controller base registers
17 - clocks : phandle
20 - for cd, bus-width and additional generic mmc parameters
22 - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
[all …]
|
| H A D | hi3798cv200-dw-mshc.txt | 4 Read synopsys-dw-mshc.txt for more details
9 by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
13 - compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
14 - clocks: A list of phandle + clock-specifier pairs for the clocks listed
15 in clock-names.
16 - clock-names: Should contain the following:
17 "ciu" - The ciu clock described in synopsys-dw-mshc.txt.
18 "biu" - The biu clock described in synopsys-dw-mshc.txt.
19 "ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
20 "ciu-drive" - Hi3798CV200 extended phase clock for ciu driving.
[all …]
|
| /freebsd/contrib/ntp/scripts/monitoring/ |
| H A D | loopwatch.config.SAMPLE | 3 # delay: sampling interval in seconds
18 # showfreq: yes/no control display of frequency values
27 # showfreg: yes/no control display of linear regression of frequency values
31 # ISO_DATE_TIME: yyyy-mm-dd_hh:mm:ss.ms
40 # if a number is given, subtract this from sampling values for display
46 # if a number is given, the sampling values are divided by this number
70 # limit display (y-axis) to values not larger than <number>
74 # limit display (y-axis) to values not smaller than <number>
|
| /freebsd/share/man/man4/ |
| H A D | hwpmc.4 | 1 .\" Copyright (c) 2003-2008 Joseph Koshy
39 .Bd -ragged -offset indent
44 .Bd -ragged -offset indent
49 .Bd -literal -offset indent
54 .Bd -ragged -offset indent
62 .Bd -ragged -offset indent
75 The driver supports multi-processor systems.
89 .Bl -tag -width ".Em Process-scope"
90 .It Em "Process-scope"
93 .It Em "System-scope"
[all …]
|
| H A D | acpi_battery.4 | 39 An ACPI-compatible battery device supports either a Control
65 .Bl -tag -width indent
71 .Bl -tag -width indent
78 .Bl -tag -width indent
93 .Li -1
110 .Bl -tag -width indent
113 There are the following well-known values:
114 .Bl -tag -width indent
137 .Bl -tag -width indent
160 .Bl -tag -width indent
[all …]
|
| H A D | dtrace_profile.4 | 2 .\" SPDX-License-Identifier: BSD-2-Clause
13 .Nm profile Ns Cm :::profile- Ns Ar rate Ns Op Ar unit
14 .Nm profile Ns Cm :::tick- Ns Ar rate Ns Op Ar unit
41 .Bl -column -offset indent "ns, nsec" "Definition"
50 .It Cm hz Ta Hertz (frequency per second)
57 .Bl -tag -width arg0
83 .Ss Example 1 : Profiling On-CPU Kernel Stack Traces
84 The following DTrace one-liner uses the
87 .\" XXX: Keep on one line for easier copy-pasting.
88 .Bd -literal -offset indent
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/spi/ |
| H A D | spi-samsung.txt | 8 - compatible: should be one of the following.
9 - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
10 - samsung,s3c6410-spi: for s3c6410 platforms
11 - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
12 - samsung,exynos5433-spi: for exynos5433 compatible controllers
13 - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED>
15 - reg: physical base address of the controller and length of memory mapped
18 - interrupts: The interrupt number to the cpu. The interrupt specifier format
21 - dmas : Two or more DMA channel specifiers following the convention outlined
24 - dma-names: Names for the dma channels. There must be at least one channel
[all …]
|
| /freebsd/sys/contrib/alpine-hal/ |
| H A D | al_hal_serdes_interface.h | 9 found at http://www.gnu.org/licenses/gpl-2.0.html
53 /* *INDENT-OFF* */
57 /* *INDENT-ON* */
178 * Tx de-emphasis parameters
183 AL_SERDES_TX_DEEMP_C_MINUS, /*< c(-1) */
196 * Transmit Amplitude control signal. Used to define the full-scale
198 * 000 - Not Supported
199 * 001 - 952mVdiff-pkpk
200 * 010 - 1024mVdiff-pkpk
201 * 011 - 1094mVdiff-pkpk
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | apm-xgene-phy.txt | 1 * APM X-Gene 15Gbps Multi-purpose PHY nodes
3 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
7 - compatible : Shall be "apm,xgene-phy".
8 - reg : PHY memory resource is the SDS PHY access resource.
9 - #phy-cells : Shall be 1 as it expects one argument for setting
14 - status : Shall be "ok" if enabled or "disabled" if disabled.
16 - clocks : Reference to the clock entry.
17 - apm,tx-eye-tuning : Manual control to fine tune the capture of the serial
19 Two set of 3-tuple setting for each (up to 3)
22 - apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample
[all …]
|
| H A D | apm,xgene-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/apm,xgene-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: APM X-Gene 15Gbps Multi-purpose PHY
10 - Khuong Dinh <khuong@os.amperecomputing.com>
13 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
19 - const: apm,xgene-phy
24 '#phy-cells':
32 apm,tx-eye-tuning:
[all …]
|
| /freebsd/contrib/ntp/html/drivers/ |
| H A D | driver6.html | 1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->17-Jul-2014 02:17<!-- #EndDate -->
22 …-Range Instrumentation Group (IRIG) standard time distribution signal. This signal is generated by…
23 …sampling rate 8 kHz and μ-law companding to demodulate the data. This is the same standard as u…
24 …d 50 Ohms. In such cases the cable should be terminated at the line-in port with a 50-Ohm resistor…
25 … to the PPS signal from a GPS receiver, the mean offset with a 2.4-GHz P4 running FreeBS…
26 …. The Sun kernel driver has a sawtooth modulation with amplitude over 5 ms P-P and period 5.5 s. T…
30 …-modulated carrier with pulse-width modulated data bits. For IRIG-B, the carrier frequency is 1000…
31 …-Hz μ-law companded samples using separate signal filters for IRIG-B and IRIG-E, a comb filter,…
[all …]
|
| /freebsd/contrib/ntp/html/hints/ |
| H A D | sgi | 2 --------------------------
7 which seems to try to perform the correction over 100-200 seconds, with
32 -----------
39 one-second intervals - I am probably seeing sampling aliasing between
49 ---------
52 time increment, effectively trimming the clock frequency. Xntpd could
53 use this rather than adjtime() to do it's frequency trimming, but I
63 -------------------
65 If you use a local clock on an RS-232 line, look into the kernel
67 out /usr/sysgen/master.d/[sduart|cdsio]). I have a Kinemetrics OM-DC
[all …]
|
| /freebsd/contrib/llvm-project/llvm/include/llvm/Transforms/IPO/ |
| H A D | SampleProfileProbe.h | 1 //===- Transforms/IPO/SampleProfileProbe.h ----------*- C++ -*-===//
5 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
7 //===----------------------------------------------------------------------===//
13 //===----------------------------------------------------------------------===//
73 /// Insert pseudo probes for block sampling and value sampling.
125 // postlink-time re-annotation can degrade profile quality because of prelink
131 // duplicating code well-maintain the branch frequency information (BFI). This
|