| /linux/arch/arm/boot/dts/nxp/imx/ | 
| H A D | imx6dl-yapp43-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.05 #include <dt-bindings/gpio/gpio.h>
 6 #include <dt-bindings/interrupt-controller/irq.h>
 7 #include <dt-bindings/input/input.h>
 8 #include <dt-bindings/leds/common.h>
 9 #include <dt-bindings/pwm/pwm.h>
 20 		compatible = "pwm-backlight";
 22 		brightness-levels = <0 32 64 128 255>;
 23 		default-brightness-level = <32>;
 24 		num-interpolated-steps = <8>;
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/qcom/ | 
| H A D | sa8540p-ride.dts | 1 // SPDX-License-Identifier: BSD-3-Clause7 /dts-v1/;
 9 #include <dt-bindings/gpio/gpio.h>
 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 13 #include "sa8540p-pmics.dtsi"
 17 	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
 29 		stdout-path = "serial0:115200n8";
 34 	regulators-0 {
 35 		compatible = "qcom,pm8150-rpmh-regulators";
 36 		qcom,pmic-id = "a";
 [all …]
 
 | 
| H A D | sdm850-samsung-w737.dts | 1 // SPDX-License-Identifier: BSD-3-Clause8 /dts-v1/;
 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 11 #include <dt-bindings/input/gpio-keys.h>
 12 #include <dt-bindings/input/input.h>
 13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 14 #include <dt-bindings/sound/qcom,q6afe.h>
 15 #include <dt-bindings/sound/qcom,q6asm.h>
 17 #include "sdm845-wcd9340.dtsi"
 24 /delete-node/ &qseecom_mem;
 [all …]
 
 | 
| H A D | sdm845-lg-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.08 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 16 /delete-node/ &adsp_mem;
 17 /delete-node/ &cdsp_mem;
 18 /delete-node/ &gpu_mem;
 19 /delete-node/ &ipa_fw_mem;
 20 /delete-node/ &mba_region;
 21 /delete-node/ &mpss_region;
 [all …]
 
 | 
| H A D | msm8996-xiaomi-common.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause8 #include <dt-bindings/input/input.h>
 9 #include <dt-bindings/gpio/gpio.h>
 10 #include <dt-bindings/leds/common.h>
 11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 15 		compatible = "gpio-gate-clock";
 17 		#clock-cells = <0>;
 18 		enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
 20 		pinctrl-names = "default";
 21 		pinctrl-0 = <&divclk1_default>;
 [all …]
 
 | 
| /linux/Documentation/devicetree/bindings/regulator/ | 
| H A D | anatop-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)3 ---
 4 $id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
 10   - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
 13   - $ref: regulator.yaml#
 17     const: fsl,anatop-regulator
 19   regulator-name: true
 21   anatop-reg-offset:
 23     description: u32 value representing the anatop MFD register offset.
 [all …]
 
 | 
| H A D | pbias-regulator.txt | 1 PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.4 - compatible:
 5   - should be "ti,pbias-dra7" for DRA7
 6   - should be "ti,pbias-omap2" for OMAP2
 7   - should be "ti,pbias-omap3" for OMAP3
 8   - should be "ti,pbias-omap4" for OMAP4
 9   - should be "ti,pbias-omap5" for OMAP5
 10   - "ti,pbias-omap" is deprecated
 11 - reg: pbias register offset from syscon base and size of pbias register.
 12 - syscon : phandle of the system control module
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/qcom/ | 
| H A D | qcom-apq8064-asus-nexus7-flo.dts | 1 // SPDX-License-Identifier: GPL-2.02 #include <dt-bindings/gpio/gpio.h>
 3 #include <dt-bindings/input/input.h>
 4 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 6 #include "qcom-apq8064-v2.0.dtsi"
 12 	compatible = "asus,nexus7-flo", "qcom,apq8064";
 13 	chassis-type = "tablet";
 21 		stdout-path = "serial0:115200n8";
 24 	reserved-memory {
 25 		#address-cells = <1>;
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/samsung/ | 
| H A D | exynos4412-odroid-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.03  * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
 7 #include <dt-bindings/sound/samsung-i2s.h>
 8 #include <dt-bindings/input/input.h>
 9 #include <dt-bindings/clock/maxim,max77686.h>
 11 #include "exynos4412-ppmu-common.dtsi"
 12 #include <dt-bindings/gpio/gpio.h>
 13 #include "exynos-mfc-reserved-memory.dtsi"
 22 		stdout-path = &serial_1;
 26 		compatible = "samsung,secure-firmware";
 [all …]
 
 | 
| H A D | exynos4210-i9100.dts | 1 // SPDX-License-Identifier: GPL-2.03  * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
 11 /dts-v1/;
 13 #include "exynos4412-ppmu-common.dtsi"
 15 #include <dt-bindings/gpio/gpio.h>
 16 #include <dt-bindings/input/linux-event-codes.h>
 19 	model = "Samsung Galaxy S2 (GT-I9100)";
 21 	chassis-type = "handset";
 35 		stdout-path = "serial2:115200n8";
 38 	vemmc_reg: regulator-0 {
 [all …]
 
 | 
| H A D | s5pv210-aries.dtsi | 1 // SPDX-License-Identifier: GPL-2.06 /dts-v1/;
 7 #include <dt-bindings/gpio/gpio.h>
 8 #include <dt-bindings/interrupt-controller/irq.h>
 32 	reserved-memory {
 33 		#address-cells = <1>;
 34 		#size-cells = <1>;
 38 			compatible = "shared-dma-pool";
 39 			no-map;
 44 			compatible = "shared-dma-pool";
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/ti/omap/ | 
| H A D | am335x-igep0033.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only3  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
 5  * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
 8 /dts-v1/;
 11 #include <dt-bindings/interrupt-controller/irq.h>
 16 			cpu0-supply = <&vdd1_reg>;
 26 		pinctrl-names = "default";
 27 		pinctrl-0 = <&leds_pins>;
 29 		compatible = "gpio-leds";
 34 			default-state = "on";
 [all …]
 
 | 
| H A D | am335x-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only8 #include <dt-bindings/interrupt-controller/irq.h>
 12 	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
 22 			cpu0-supply = <&vdd1_reg>;
 32 		compatible = "regulator-fixed";
 33 		regulator-name = "vcc5v";
 34 		regulator-min-microvolt = <5000000>;
 35 		regulator-max-microvolt = <5000000>;
 36 		regulator-boot-on;
 37 		regulator-always-on;
 [all …]
 
 | 
| H A D | omap3-n950-n9.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only3  * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
 13 			cpu0-supply = <&vcc>;
 23 		compatible = "regulator-fixed";
 24 		regulator-name = "VEMMC";
 25 		regulator-min-microvolt = <2900000>;
 26 		regulator-max-microvolt = <2900000>;
 28 		startup-delay-us = <150>;
 29 		enable-active-high;
 33 		compatible = "regulator-fixed";
 [all …]
 
 | 
| H A D | am335x-chilisom.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only3  * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
 7 #include <dt-bindings/interrupt-controller/irq.h>
 11 	compatible = "grinn,am335x-chilisom", "ti,am33xx";
 15 			cpu0-supply = <&dcdc2_reg>;
 26 	pinctrl-names = "default";
 28 	i2c0_pins: i2c0-pins {
 29 		pinctrl-single,pins = <
 35 	nandflash_pins: nandflash-pins {
 36 		pinctrl-single,pins = <
 [all …]
 
 | 
| H A D | am335x-moxa-uc-2100-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.03  * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
 13 	vbat: vbat-regulator {
 14 		compatible = "regulator-fixed";
 18 	vmmcsd_fixed: vmmcsd-regulator {
 19 		compatible = "regulator-fixed";
 20 		regulator-name = "vmmcsd_fixed";
 21 		regulator-min-microvolt = <3300000>;
 22 		regulator-max-microvolt = <3300000>;
 23 		regulator-boot-on;
 [all …]
 
 | 
| /linux/Documentation/devicetree/bindings/soc/qcom/ | 
| H A D | qcom,rpm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)3 ---
 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
 16   - Bjorn Andersson <andersson@kernel.org>
 21       - qcom,rpm-apq8064
 22       - qcom,rpm-msm8660
 23       - qcom,rpm-msm8960
 24       - qcom,rpm-ipq8064
 25       - qcom,rpm-mdm9615
 33   interrupt-names:
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/rockchip/ | 
| H A D | rk3566-lckfb-tspi.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)3 /dts-v1/;
 5 #include <dt-bindings/gpio/gpio.h>
 6 #include <dt-bindings/input/input.h>
 7 #include <dt-bindings/leds/common.h>
 8 #include <dt-bindings/pinctrl/rockchip.h>
 9 #include <dt-bindings/soc/rockchip,vop2.h>
 10 #include <dt-bindings/soc/rockchip,boot-mode.h>
 15 	compatible = "lckfb,tspi-rk3566", "rockchip,rk3566";
 24 		stdout-path = "serial2:1500000n8";
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/hisilicon/ | 
| H A D | hi6220-hikey.dts | 1 // SPDX-License-Identifier: GPL-2.09 /dts-v1/;
 11 #include "hikey-pinctrl.dtsi"
 12 #include <dt-bindings/gpio/gpio.h>
 16 	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
 26 		stdout-path = "serial3:115200n8";
 32 	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
 33 	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
 34 	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
 35 	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/renesas/ | 
| H A D | rzg2lc-smarc-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)8 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
 10 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 27 	reg_1p8v: regulator-1p8v {
 28 		compatible = "regulator-fixed";
 29 		regulator-name = "fixed-1.8V";
 30 		regulator-min-microvolt = <1800000>;
 31 		regulator-max-microvolt = <1800000>;
 32 		regulator-boot-on;
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/arm/ | 
| H A D | arm-realview-pbx.dtsi | 23 #include <dt-bindings/interrupt-controller/irq.h>24 #include <dt-bindings/gpio/gpio.h>
 27 	#address-cells = <1>;
 28 	#size-cells = <1>;
 29 	compatible = "arm,realview-pbx";
 49 	vmmc: regulator-vmmc {
 50 		compatible = "regulator-fixed";
 51 		regulator-name = "vmmc";
 52 		regulator-min-microvolt = <3300000>;
 53 		regulator-max-microvolt = <3300000>;
 [all …]
 
 | 
| H A D | arm-realview-pb1176.dts | 23 /dts-v1/;24 #include <dt-bindings/interrupt-controller/irq.h>
 25 #include <dt-bindings/gpio/gpio.h>
 28 	#address-cells = <1>;
 29 	#size-cells = <1>;
 31 	compatible = "arm,realview-pb1176";
 50 	vmmc: regulator-vmmc {
 51 		compatible = "regulator-fixed";
 52 		regulator-name = "vmmc";
 53 		regulator-min-microvolt = <3300000>;
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/freescale/ | 
| H A D | imx8mm-venice-gw7904.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)6 /dts-v1/;
 8 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/input/linux-event-codes.h>
 10 #include <dt-bindings/leds/common.h>
 11 #include <dt-bindings/phy/phy-imx8-pcie.h>
 17 	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
 25 		stdout-path = &uart2;
 33 	gpio-keys {
 34 		compatible = "gpio-keys";
 [all …]
 
 | 
| H A D | imx8mm-venice-gw7903.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)6 /dts-v1/;
 8 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/input/linux-event-codes.h>
 10 #include <dt-bindings/leds/common.h>
 11 #include <dt-bindings/phy/phy-imx8-pcie.h>
 17 	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
 27 		stdout-path = &uart2;
 35 	gpio-keys {
 36 		compatible = "gpio-keys";
 [all …]
 
 | 
| H A D | imx8mn-venice-gw7902.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)6 /dts-v1/;
 8 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/input/linux-event-codes.h>
 10 #include <dt-bindings/leds/common.h>
 11 #include <dt-bindings/net/ti-dp83867.h>
 17 	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
 26 		stdout-path = &uart2;
 35 		compatible = "fixed-clock";
 36 		#clock-cells = <0>;
 [all …]
 
 |