/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7s-colibri-iris.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 42 &pwm2 { 43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx7s-colibri-eval-v3.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 42 &pwm2 { 43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx7d-colibri-iris.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 42 &pwm2 { 43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx7d-colibri-eval-v3.dts | 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 23 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 42 &pwm2 { 43 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx7-colibri-iris.dtsi | 12 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 13 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 64 &pwm2 { 65 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx7-colibri-eval-v3.dtsi | 21 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 22 * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. 66 &pwm2 { 67 /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
H A D | imx6q-var-dt6customboard.dts | 21 pwms = <&pwm2 0 50000 0>; 205 &pwm2 {
|
/linux/Documentation/devicetree/bindings/pwm/ |
H A D | snps,dw-apb-timers-pwm2.yaml | 5 $id: http://devicetree.org/schemas/pwm/snps,dw-apb-timers-pwm2.yaml# 28 const: snps,dw-apb-timers-pwm2 62 compatible = "snps,dw-apb-timers-pwm2";
|
H A D | mediatek,mt2712-pwm.yaml | 58 - const: pwm2 91 "pwm1", "pwm2",
|
H A D | ti,twl-pwm.txt | 4 On TWL4030 series: PWM1 and PWM2
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | loongson,ls2k-pinctrl.yaml | 42 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, 47 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, 72 groups = "pwm2";
|
H A D | nuvoton,wpcm450-pinctrl.yaml | 76 fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, 86 pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
|
H A D | aspeed,ast2600-pinctrl.yaml | 153 - PWM2 387 - PWM2
|
H A D | nuvoton,npcm845-pinctrl.yaml | 82 fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, r2, r2err, r2md, 105 fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
|
/linux/sound/soc/codecs/ |
H A D | tas5086.c | 591 SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]), 609 SND_SOC_DAPM_OUTPUT("PWM2"), 630 SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0, 695 { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" }, 702 { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" }, 709 { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" }, 716 { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" }, 723 { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" }, 730 { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" }, 738 { "PWM2", NULL, "PWM2 Mux" },
|
/linux/arch/arm/boot/dts/nuvoton/ |
H A D | nuvoton-wpcm450.dtsi | 407 pwm2_pins: mux-pwm2 { 408 groups = "pwm2"; 409 function = "pwm2";
|
/linux/drivers/pinctrl/berlin/ |
H A D | pinctrl-as370.c | 65 BERLIN_PINCTRL_FUNCTION(0x2, "pwm"), /* PWM2 */ 173 BERLIN_PINCTRL_FUNCTION(0x3, "pwm")), /* PWM2 */ 235 BERLIN_PINCTRL_GROUP("PWM2", 0x14, 0x3, 0x06, 237 BERLIN_PINCTRL_FUNCTION(0x1, "pwm")), /* PWM2 */ 312 BERLIN_PINCTRL_FUNCTION(0x3, "pwm")), /* PWM2 */
|
/linux/drivers/pinctrl/qcom/ |
H A D | pinctrl-ipq8074.c | 878 MSM_PIN_FUNCTION(pwm2), 940 PINGROUP(20, led2, pwm2, NA, qdss_tracedata_b, NA, NA, NA, NA, NA), 945 PINGROUP(23, pwm2, blsp4_uart1, blsp4_spi1, blsp3_spi2, NA, 953 PINGROUP(27, audio_txfsync, pwm2, NA, qdss_tracedata_b, NA, NA, NA, 961 PINGROUP(31, audio_rxfsync, pwm2, atest_char2, NA, qdss_tracedata_b, 1012 PINGROUP(66, pta1_0, pwm2, prng_rosc, NA, NA, NA, NA, NA, NA),
|
H A D | pinctrl-ipq5332.c | 718 MSM_PIN_FUNCTION(pwm2), 780 PINGROUP(25, mdc0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc2, qdss_tracedata_a, _), 781 PINGROUP(26, mdio0, blsp1_uart1, blsp1_spi1, pwm2, _, _, prng_rosc3, qdss_tracedata_a, _), 782 PINGROUP(27, mdc1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _, _, qdss_tracedata_a, _), 783 PINGROUP(28, mdio1, blsp0_uart1, blsp1_uart1, blsp1_spi1, pwm2, _, tsens_max, _, _),
|
/linux/Documentation/hwmon/ |
H A D | w83795.rst | 76 43 FANCTL2 11h (bank 2) pwm2 132 35 FANCTL2 11h (bank 2) pwm2
|
/linux/arch/arm/boot/dts/st/ |
H A D | spear320-hmi.dts | 80 pwm2 { 82 st,function = "pwm2";
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3568-radxa-e25.dts | 29 pwms = <&pwm2 0 1000000 0>; 184 &pwm2 {
|
/linux/drivers/pinctrl/mediatek/ |
H A D | pinctrl-mtk-mt8135.h | 304 MTK_FUNCTION(5, "PWM2") 561 MTK_FUNCTION(5, "PWM2"), 719 MTK_PIN(PINCTRL_PIN(74, "PWM2"), 723 MTK_FUNCTION(1, "PWM2"), 823 MTK_FUNCTION(4, "PWM2"), 1162 MTK_FUNCTION(5, "PWM2"), 1184 MTK_FUNCTION(5, "PWM2"), 1192 MTK_FUNCTION(2, "PWM2"), 1329 MTK_FUNCTION(5, "PWM2") 1835 MTK_FUNCTION(4, "PWM2"), [all …]
|
H A D | pinctrl-mtk-mt8186.h | 235 MTK_FUNCTION(4, "PWM2"), 488 MTK_FUNCTION(3, "PWM2"), 541 MTK_FUNCTION(3, "PWM2"), 805 MTK_FUNCTION(3, "PWM2"), 943 MTK_FUNCTION(3, "PWM2"), 1092 MTK_FUNCTION(2, "PWM2"), 1250 MTK_FUNCTION(4, "PWM2"), 1469 MTK_FUNCTION(3, "PWM2"), 1834 MTK_FUNCTION(1, "PWM2"),
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mm-kontron-bl-osm-s.dts | 48 pwms = <&pwm2 0 5000 0>; 183 &pwm2 {
|