/freebsd/sys/contrib/device-tree/Bindings/pwm/ |
H A D | opencores,pwm.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: OpenCores PWM controller 10 - William Qiu <william.qiu@starfivetech.com> 13 The OpenCores PTC ip core contains a PWM controller. When operating in PWM 14 mode, the PTC core generates binary signal with user-programmable low and 15 high periods. All PTC counters and registers are 32-bit. 18 - $ref: pwm.yaml# [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
H A D | imx8qm-apalis-v1.1.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 6 #include <dt-bindings/pwm/pwm.h> 8 #include "imx8-apalis-v1.1.dtsi" 11 model = "Toradex Apalis iMX8QM V1.1"; 12 compatible = "toradex,apalis-imx8-v1.1",
|
/freebsd/sys/dts/arm64/overlays/ |
H A D | sun50i-a64-pwm.dtso | 1 /dts-v1/; 5 compatible = "allwinner,sun50i-a64"; 9 pwm: pwm@1c21400 { 10 compatible = "allwinner,sun50i-a64-pwm", 11 "allwinner,sun5i-a13-pwm"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&pwm_pin>; 16 #pwm-cells = <3>; 24 function = "pwm";
|
H A D | sun50i-a64-rpwm.dtso | 1 /dts-v1/; 5 compatible = "allwinner,sun50i-a64"; 9 r_pwm: pwm@1f03800 { 10 compatible = "allwinner,sun50i-a64-pwm", 11 "allwinner,sun5i-a13-pwm"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&r_pwm_pin>; 16 #pwm-cells = <3>; 22 r_pwm_pin: pwm {
|
/freebsd/sys/contrib/device-tree/src/arm64/zte/ |
H A D | zx296718-pcbox.dts | 5 * SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 /dts-v1/; 10 #include <dt-bindings/pwm/pwm.h> 14 compatible = "zte,zx296718-pcbox", "zte,zx296718"; 17 stdout-path = "serial0:115200n8"; 25 a53_vdd0v9: regulator-a53 { 26 compatible = "pwm-regulator"; 27 pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>; 28 regulator-name = "A53_VDD0V9"; 29 regulator-min-microvolt = <855000>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/samsung/ |
H A D | exynos5422-odroidxu4.dts | 1 // SPDX-License-Identifier: GPL-2.0 7 * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd. 11 /dts-v1/; 12 #include <dt-bindings/leds/common.h> 13 #include <dt-bindings/sound/samsung-i2s.h> 14 #include "exynos5422-odroidxu [all...] |
H A D | exynos5422-odroidxu3.dts | 1 // SPDX-License-Identifier: GPL-2.0 10 /dts-v1/; 11 #include "exynos5422-odroidxu3-common.dtsi" 12 #include "exynos5422-odroidxu3-audio.dtsi" 13 #include "exynos54xx-odroidxu-leds.dtsi" 17 compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; 28 power-sensor@40 { 31 shunt-resistor = <10000>; 35 power-sensor@41 { 38 shunt-resistor = <10000>; [all …]
|
H A D | exynos5422-odroidxu3-lite.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Hardkernel Odroid XU3-Lite board device tree source 11 /dts-v1/; 12 #include "exynos5422-odroidxu3-common.dtsi" 13 #include "exynos5422-odroidxu3-audio.dtsi" 14 #include "exynos54xx-odroidxu-leds.dtsi" 18 compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; 34 samsung,asv-bin = <2>; 38 * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies 43 /delete-node/opp-2000000000; [all …]
|
H A D | exynos4412-odroidu3.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Hardkernel's Exynos4412 based ODROID-U3 board device tree source 7 * Device tree source file for Hardkernel's ODROID-U3 board which is based 11 /dts-v1/; 12 #include <dt-bindings/leds/common.h> 13 #include "exynos4412-odroid-commo [all...] |
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx7s-colibri-iris.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 6 /dts-v1/; 7 #include "imx7s-colibri.dtsi" 8 #include "imx7-colibri-iris.dtsi" 12 compatible = "toradex,colibri-imx7s-iris", 13 "toradex,colibri-imx7s", 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 41 /* Colibri PWM<B> */ 47 /* Colibri PWM<C> */
|
H A D | imx7s-colibri-eval-v3.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 3 * Copyright 2016-2022 Toradex 6 /dts-v1/; 7 #include "imx7s-colibri.dtsi" 8 #include "imx7-colibri-eval-v3.dtsi" 12 compatible = "toradex,colibri-imx7s-eval-v3", 13 "toradex,colibri-imx7s", 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 41 /* Colibri PWM<B> */ 47 /* Colibri PWM<C> */
|
H A D | imx7d-colibri-eval-v3.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 3 * Copyright 2016-2022 Toradex 6 /dts-v1/; 7 #include "imx7d-colibri.dtsi" 8 #include "imx7-colibri-eval-v3.dtsi" 12 compatible = "toradex,colibri-imx7d-eval-v3", 13 "toradex,colibri-imx7d", 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 41 /* Colibri PWM<B> */ 47 /* Colibri PWM<C> */ [all …]
|
H A D | imx7d-colibri-iris.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 6 /dts-v1/; 7 #include "imx7d-colibri.dtsi" 8 #include "imx7-colibri-iris.dtsi" 12 compatible = "toradex,colibri-imx7d-iris", 13 "toradex,colibri-imx7d", 22 * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. 41 /* Colibri PWM<B> */ 47 /* Colibri PWM<C> */ 55 disable-over-current;
|
/freebsd/sys/contrib/device-tree/src/arm/vt8500/ |
H A D | wm8850-w70v2.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * wm8850-w70v2.dts 4 * - Device tree file for Wondermedia WM8850 Tablet 5 * - 'W70-V2' mainboard 6 * - HongLianYing 'HLY070ML268-21A' 7" LCD panel 11 /dts-v1/; 13 #include <dt-bindings/pwm/pwm.h> 16 model = "Wondermedia WM8850-W70v2 Tablet"; 19 compatible = "pwm-backlight"; 20 pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/microchip/ |
H A D | at91-kizbox.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board 5 * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> 6 * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> 8 /dts-v1/; 10 #include <dt-bindings/pwm/pwm.h> 18 stdout-path = &dbgu; 27 clock-frequency = <18432000>; 31 gpio-keys { 32 compatible = "gpio-keys"; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nvidia/ |
H A D | tegra124-apalis-v1.2-eval.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 3 * Copyright 2016-2018 Toradex AG 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 9 #include "tegra124-apalis-v1 [all...] |
H A D | tegra30-apalis-v1.1-eval.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra30-apalis-v1.1.dtsi" 9 compatible = "toradex,apalis_t30-v [all...] |
H A D | tegra20-colibri.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A; 7 * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A; 8 * Colibri T20 512MB IT V1.2A 22 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 23 nvidia,hpd-gpio = 25 pll-supply = <®_1v8_avdd_hdmi_pll>; 26 vdd-supply = <®_3v3_avdd_hdmi>; 31 lan-reset-n-hog { 32 gpio-hog; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | msm8916-samsung-gt510.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 /dts-v1/; 5 #include "msm8916-samsung-gt5-common.dtsi" 10 chassis-typ [all...] |
/freebsd/sys/contrib/device-tree/src/arm64/rockchip/ |
H A D | rk3326-anbernic-rg351m.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 /dts-v1/; 9 #include "rk3326-anbernic-rg351m.dtsi" 18 iovcc-supply = <&vcc_lcd>; 20 vdd-supply = <&vcc_lcd>;
|
/freebsd/sys/contrib/device-tree/src/arm/synaptics/ |
H A D | berlin2cd-google-chromecast.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 19 stdout-path = "serial0:115200n8"; 26 * We're using "linux,usable-memory" instead of "reg" here 34 linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */ 37 led-controller { 38 compatible = "pwm-leds"; 39 pinctrl-0 = <&ledpwm_pmux>; 40 pinctrl-names = "default"; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/amlogic/ |
H A D | meson8b-mxq.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 22 stdout-path = "serial0:115200n8"; 30 vcck: regulator-vcck { 31 compatible = "pwm-regulator"; 33 regulator-name = "VCCK"; 34 regulator-min-microvolt = <860000>; 35 regulator-max-microvolt = <1140000>; 37 pwm-supply = <&vcc_5v>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/ti/ |
H A D | k3-am654-base-board-rocktech-rk101-panel.dtso | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM. 4 * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT 7 * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ 10 /dts-v1/; 13 #include <dt-bindings/pwm/pwm.h> 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/interrupt-controller/irq.h> 19 compatible = "rocktech,rk101ii01d-ct"; 21 enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; [all …]
|
/freebsd/sys/contrib/device-tree/src/mips/brcm/ |
H A D | bcm7420.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #address-cells = <1>; 4 #size-cells = <1>; 8 #address-cells = <1>; 9 #size-cells = <0>; 11 mips-hpt-frequency = <93750000>; 30 cpu_intc: interrupt-controller { 31 #address-cells = <0>; 32 compatible = "mti,cpu-interrupt-controller"; 34 interrupt-controller; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/broadcom/ |
H A D | bcm53016-meraki-mr32.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 6 * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> 9 /dts-v1/; 12 #include "bcm5301x-nand-cs0-bch8.dtsi" 13 #include <dt-bindings/leds/common.h> 33 compatible = "gpio-leds"; 39 panic-indicator; 49 compatible = "gpio-keys"; 51 button-restart { 58 pwm-leds { [all …]
|